mbox series

[0/3] Some sx9310 iio driver updates

Message ID 20200723230344.1422750-1-swboyd@chromium.org (mailing list archive)
Headers show
Series Some sx9310 iio driver updates | expand

Message

Stephen Boyd July 23, 2020, 11:03 p.m. UTC 
These three patches are only related because I'm looking at this driver.
The first one resend the DT binding for the driver that was merged in 
v5.8-rc1 with a small change to update for proper regulators. The second
patch fixes a few printks that are missing newlines and should
be totally non-trivial to apply. The final patch adds support to enable
the svdd supply so that this driver can work on a board I have where the
svdd supply isn't enabled at boot and needs to be turned on before this
driver starts to communicate with the chip.

Daniel Campello (1):
  dt-bindings: iio: Add bindings for sx9310 sensor

Stephen Boyd (2):
  iio: sx9310: Add newlines to printks
  iio: sx9310: Enable regulator for svdd supply

 .../iio/proximity/semtech,sx9310.yaml         | 60 +++++++++++++++++++
 drivers/iio/proximity/sx9310.c                | 59 ++++++++++++++----
 2 files changed, 106 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Daniel Campello <campello@chromium.org>

base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407