mbox series

[v2,0/2] add support for GPIO based counter

Message ID 20210122093357.15750-1-o.rempel@pengutronix.de (mailing list archive)
Headers show
Series add support for GPIO based counter | expand


Oleksij Rempel Jan. 22, 2021, 9:33 a.m. UTC
changes v2:
- add commas
- avoid possible unhandled interrupts in the enable path
- do not use of_ specific gpio functions

Add support for GPIO based pulse counter. For now it can only count
pulses. With counter char device support, we will be able to attach
timestamps and measure actual pulse frequency.

Never the less, it is better to mainline this driver now (before chardev
patches go mainline), to provide developers additional use case for the counter
framework with chardev support.

Oleksij Rempel (2):
  dt-bindings: counter: add gpio-pulse-counter binding
  counter: add GPIO based pulse counters

 .../bindings/counter/gpio-pulse-counter.yaml  |  39 +++
 drivers/counter/Kconfig                       |   9 +
 drivers/counter/Makefile                      |   1 +
 drivers/counter/gpio-pulse-cnt.c              | 244 ++++++++++++++++++
 4 files changed, 293 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/counter/gpio-pulse-counter.yaml
 create mode 100644 drivers/counter/gpio-pulse-cnt.c