mbox series

[v2,0/3] Add Semtech SX9360 SAR Sensor support

Message ID 20211120102634.1688190-1-gwendal@chromium.org (mailing list archive)
Headers show
Series Add Semtech SX9360 SAR Sensor support | expand

Message

Gwendal Grignou Nov. 20, 2021, 10:26 a.m. UTC 
Add a new Semtech SAR sensor SX9360.
It is a simpler version of SX9324, with only one phase instead of 4.
Leverage sx_common.h interface defined when SX9324 was added.

Major changes since v1:
- Integrate errors found in sx9324 driver.
- Simplify whomai function.
- Fix cut and paste in bindings.
- Handle negative sysfs parameters.

Gwendal Grignou (3):
  iio: proximity: Add sx9360 support
  dt-bindings: iio: Add sx9360 binding
  iio: sx9360: Add dt-binding support

 .../iio/proximity/semtech,sx9360.yaml         |  90 ++
 drivers/iio/proximity/Kconfig                 |  14 +
 drivers/iio/proximity/Makefile                |   1 +
 drivers/iio/proximity/sx9360.c                | 889 ++++++++++++++++++
 4 files changed, 994 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
 create mode 100644 drivers/iio/proximity/sx9360.c