mbox series

[00/10] Light core IIO enhancements

Message ID 20211215151344.163036-1-miquel.raynal@bootlin.com (mailing list archive)
Headers show
Series Light core IIO enhancements | expand

Message

Miquel Raynal Dec. 15, 2021, 3:13 p.m. UTC
Hello,

As part of a previous discussion with Jonathan (I know, it was three
months ago, sorry for the delay :-$), it appeared necessary to do a
little bit of cleanup in the IIO core and at least provide a little bit
more documentation for developers diving into the IIO subsystem for the
first time. My first move was to write a blog post trying to explain
(from my point of view but with the review of Jonathan) what is
necessary to understand when writing and IIO kernel driver:
https://bootlin.com/blog/the-backbone-of-a-linux-industrial-i-o-driver/

Here is now the second halve of this work, with few things that I tried
to address.

* The currentmode indio_dev entry was misused by several device drivers,
  I tried to understand which ones were wrong (there are two still
  accessing this variable left, I decided not to touch them because I
  think it is legitimate) and I tried to find an alternative.

* Then, I tried to make new accesses to this variable harder in order to
  avoid future mistakes, by creating a couple of helpers and moving it
  to the opaque structure.

* I continued with the IIO modes which are completely
  undocumented. Following a few exchanges with Jonathan, I tried to take
  most of this discussion and put it into a kernel doc header.

* When doing the above task, I realized that there was a particular case
  handled for kfifo buffers which I tried to simplify, but if this is a
  mistake, I'll just drop the patch.

Hope this will help!

Cheers,
Miquèl

Miquel Raynal (10):
  iio: core: Fix the kernel doc regarding the currentmode iio_dev entry
  iio: core: Enhance the kernel doc of modes and currentmodes iio_dev
    entries
  iio: magnetometer: rm3100: Stop abusing the ->currentmode
  iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  iio: st_sensors: Use iio_device_claim/release_direct_mode() when
    relevant
  iio: core: Hide read accesses to iio_dev->currentmode
  iio: core: Hide write accesses to iio_dev->currentmode
  iio: core: Move iio_dev->currentmode to the opaque structure
  iio: core: Simplify the registration of kfifo buffers
  iio: core: Clarify the modes

 drivers/iio/accel/bmc150-accel-core.c         |  4 +-
 drivers/iio/accel/fxls8962af-core.c           |  1 -
 drivers/iio/accel/sca3000.c                   |  1 -
 drivers/iio/accel/ssp_accel_sensor.c          |  1 -
 drivers/iio/adc/at91-sama5d2_adc.c            |  4 +-
 drivers/iio/adc/ina2xx-adc.c                  |  1 -
 drivers/iio/adc/stm32-dfsdm-adc.c             |  5 +-
 drivers/iio/adc/ti_am335x_adc.c               |  4 +-
 drivers/iio/buffer/kfifo_buf.c                | 12 +---
 .../cros_ec_sensors/cros_ec_sensors_core.c    |  3 +-
 drivers/iio/common/scmi_sensors/scmi_iio.c    |  1 -
 .../iio/common/st_sensors/st_sensors_core.c   | 28 +++++----
 drivers/iio/gyro/ssp_gyro_sensor.c            |  1 -
 drivers/iio/health/max30100.c                 |  1 -
 drivers/iio/health/max30102.c                 |  1 -
 .../iio/imu/inv_icm42600/inv_icm42600_accel.c |  1 -
 .../iio/imu/inv_icm42600/inv_icm42600_gyro.c  |  1 -
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    |  1 -
 drivers/iio/industrialio-buffer.c             | 12 ++--
 drivers/iio/industrialio-core.c               | 13 +++++
 drivers/iio/industrialio-trigger.c            |  2 +-
 drivers/iio/light/apds9960.c                  |  1 -
 drivers/iio/magnetometer/rm3100-core.c        | 15 +----
 .../staging/iio/impedance-analyzer/ad5933.c   |  1 -
 include/linux/iio/iio-opaque.h                | 16 ++++++
 include/linux/iio/iio.h                       | 57 ++++++++++++++++---
 include/linux/iio/kfifo_buf.h                 |  5 +-
 27 files changed, 114 insertions(+), 79 deletions(-)