[v2,0/8] Add settings for precharge and internal resistor

Message

Gwendal Grignou March 22, 2022, 6:24 a.m. UTC

For Semtech sensors SX9324 and SX9360, allow confugration of the
pre-charge resistor (9324/9360) and internal resistor (9324).

Fix register name spelling mistakes first and set default value properly
for sx9324 internal resistor register.

The 9360 changes are independent from the 9324 changes, but they are
very similar.

Gwendal Grignou (8):
  iio: sx9324: Fix default precharge internal resistance register
  iio: sx9324: Fix register field spelling
  dt-bindings: iio: sx9324: Add precharge resistor setting
  iio: sx9324: Add precharge internal resistance setting
  dt-bindings: iio: sx9324: Add internal compensation resistor setting
  iio: sx9324: Add Setting for internal compensation resistor
  dt-bindings: iio: sx9360: Add precharge resistor setting
  iio: sx9360: Add pre-charge resistor setting

 .../iio/proximity/semtech,sx9324.yaml         | 19 ++++++++
 .../iio/proximity/semtech,sx9360.yaml         |  9 ++++
 drivers/iio/proximity/sx9324.c                | 44 ++++++++++++++++---
 drivers/iio/proximity/sx9360.c                | 12 ++++-
 4 files changed, 78 insertions(+), 6 deletions(-)