mbox series

[0/5] Add support for ToF sensor on Yoshino platform

Message ID 20220510204256.8874-1-markuss.broks@gmail.com (mailing list archive)
Headers show
Series Add support for ToF sensor on Yoshino platform | expand


Markuss Broks May 10, 2022, 8:42 p.m. UTC
This series adds support for the ToF proximity sensor installed on
Yoshino devices. As part of this series, support handling the reset
GPIO and VDD supply by the VL53L0X driver. Also stop hardcoding the
interrupt type, since on Yoshino devices it seems that edge triggering
doesn't work properly.

Tested on Sony Xperia XZ1 (poplar).

Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Markuss Broks (5):
  dt-bindings: proximity: vl53l0x: Document optional supply and GPIO
  proximity: vl53l0x: Get interrupt type from DT
  proximity: vl53l0x: Handle the VDD regulator
  proximity: vl53l0x: Handle the reset GPIO
  arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support

 .../bindings/iio/proximity/st,vl53l0x.yaml    |  5 ++
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 34 +++++++++++++
 drivers/iio/proximity/vl53l0x-i2c.c           | 50 ++++++++++++++++++-
 3 files changed, 88 insertions(+), 1 deletion(-)