mbox series

[v3,0/2] use device_for_each_child_node_scoped to access device child nodes

Message ID 20240820-device_child_node_access-v3-0-1ee09bdedb9e@gmail.com (mailing list archive)
Headers show
Series use device_for_each_child_node_scoped to access device child nodes | expand

Message

Javier Carrasco Aug. 20, 2024, 7:02 p.m. UTC 
This series removes accesses to the device `fwnode` to iterate over its
own child nodes. Using the `device_for_each_child_node` macro provides
direct access to the device child nodes, and given that in all cases
they are only required within the loop, the scoped variant of the macro
can be used.

It has been stated in previous discussions [1] that `device_for_each_*`
should be used to access device child nodes, removing the need to access
its internal fwnode, and restricting `fwnode_for_each_*` to traversing
subnodes when required.

Note that `device_for_each_*` implies availability, which means that
after this conversion, unavailable nodes will not be accessible within
the loop. The affected drivers does not seem to have any reason to
iterate over unavailable nodes, though. But if someone has a case where
the affected drivers might require accessing unavailable nodes, please
let me know.

Link: https://lore.kernel.org/linux-hwmon/cffb5885-3cbc-480c-ab6d-4a442d1afb8a@gmail.com/ [1]
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
Changes in v3:
- leds-as3645a: swap the parameters in as3645a_parse_node() to have dev
  at the beginning.
- Rebase onto next-20240820, drop upstreamed patches (changes for
  coresight-cti-platform).
- Link to v2: https://lore.kernel.org/r/20240808-device_child_node_access-v2-0-fc757cc76650@gmail.com

Changes in v2:
- Rebase onto next-20240808, drop upstreamed patches (changes for ad7768-1)
- xilinx-ams.c: drop fwnode_device_is_available(child) (implicit in the
  loop).
- Link to v1: https://lore.kernel.org/r/20240801-device_child_node_access-v1-0-ddfa21bef6f2@gmail.com

---
Javier Carrasco (2):
      iio: adc: xilinx-ams: use device_* to iterate over device child nodes
      leds: as3645a: use device_* to iterate over device child nodes

 drivers/iio/adc/xilinx-ams.c      | 15 +++++----------
 drivers/leds/flash/leds-as3645a.c |  8 +++-----
 2 files changed, 8 insertions(+), 15 deletions(-)
---
base-commit: bb1b0acdcd66e0d8eedee3570d249e076b89ab32
change-id: 20240725-device_child_node_access-442533910a6f

Best regards,