[v3,0/7] pressure: bmp280: Minor cleanup and interrupt support

Message

Vasileios Amoiridis Aug. 23, 2024, 6:17 p.m. UTC

Depends on this: https://lore.kernel.org/linux-iio/[e-mail]

Changes in v3:

[PATCH v3 1/7]:
	- Moved the indexing enum on top of the calibration buffer and added a
	  comment that the reason for the complex accesses can be found in the
	  datasheet.

[PATCH v3 2/7]:
	- Use dev_err_probe() instead of dev_err() since the .preinit function
	  is called only from the probe.

[PATCH v3 4/7]:
	- Made static the const int arrays.
	- Changed the comment from "future" versions to "newer" versions.
	- The current state of the board is saved into a variable in order to be
	  able to be recovered after a suspend/resume operation.

[PATCH v3 5/7]:
	- Corrected syntax error.

[PATCH v3 6/7]:
	- Merged the bmp{3,5}80_trigger_probe() functions to one by using a
	  general __bmp280_trigger_probe() which takes the sensor specific
	  functions as interrupts.

[PATCH v3 7/7]:
	- Fixed the bmp085_chip_info array by duplicating the bmp180_chip_info
	  and just adding the extra variable for the bmp085 interrupt.

v2: https://lore.kernel.org/linux-iio/[e-mail]

Vasileios Amoiridis (7):
  iio: pressure: bmp280: Use bulk read for humidity calibration data
  iio: pressure: bmp280: Add support for bmp280 soft reset
  iio: pressure: bmp280: Remove config error check for IIR filter
    updates
  iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and
    BMP5xx devices
  iio: pressure: bmp280: Add data ready trigger support
  iio: pressure: bmp280: Move bmp085 interrupt to new configuration

 .../bindings/iio/pressure/bmp085.yaml         |   7 +-
 drivers/iio/pressure/bmp280-core.c            | 691 +++++++++++++++---
 drivers/iio/pressure/bmp280-i2c.c             |   4 +-
 drivers/iio/pressure/bmp280-spi.c             |   4 +-
 drivers/iio/pressure/bmp280.h                 |  52 ++
 5 files changed, 667 insertions(+), 91 deletions(-)


base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95
prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a