mbox series

[v2,0/2] Add I2C driver for Bosch BMI270 IMU

Message ID 20240906165322.1745328-1-lanzano.alex@gmail.com (mailing list archive)
Headers show
Series Add I2C driver for Bosch BMI270 IMU | expand

Message

Alex Lanzano Sept. 6, 2024, 4:52 p.m. UTC
Add basic I2C support for the Bosch BMI270 IMU.

References:
https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/

Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
---
Changes in v2:
- Remove spi example in binding documentation
- Add more properties to i2c example in binding documentation
---

Alex Lanzano (2):
  dt-bindings: iio: imu: add bmi270 bindings
  iio: imu: Add i2c driver for bmi270 imu

 .../bindings/iio/imu/bosch,bmi270.yaml        |  77 +++++
 MAINTAINERS                                   |   7 +
 drivers/iio/imu/Kconfig                       |   1 +
 drivers/iio/imu/Makefile                      |   1 +
 drivers/iio/imu/bmi270/Kconfig                |  22 ++
 drivers/iio/imu/bmi270/Makefile               |   6 +
 drivers/iio/imu/bmi270/bmi270.h               |  18 +
 drivers/iio/imu/bmi270/bmi270_core.c          | 322 ++++++++++++++++++
 drivers/iio/imu/bmi270/bmi270_i2c.c           |  56 +++
 9 files changed, 510 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
 create mode 100644 drivers/iio/imu/bmi270/Kconfig
 create mode 100644 drivers/iio/imu/bmi270/Makefile
 create mode 100644 drivers/iio/imu/bmi270/bmi270.h
 create mode 100644 drivers/iio/imu/bmi270/bmi270_core.c
 create mode 100644 drivers/iio/imu/bmi270/bmi270_i2c.c