| Message ID | 20241030185854.4015348-1-quic_jprakash@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for QCOM SPMI PMIC5 Gen3 ADC | expand |
On Thu, Oct 31, 2024 at 12:28:50AM +0530, Jishnu Prakash wrote: > PMIC5 Gen3 has a similar ADC architecture to that on PMIC5 Gen2, > with all SW communication to ADC going through PMK8550 which > communicates with other PMICs through PBS. The major difference is > that the register interface used here is that of an SDAM present on > PMK8550, rather than a dedicated ADC peripheral. There may be more than one > SDAM used for ADC5 Gen3. Each ADC SDAM has eight channels, each of which may > be used for either immediate reads (same functionality as previous PMIC5 and > PMIC5 Gen2 ADC peripherals) or recurring measurements (same as PMIC5 and PMIC5 > Gen2 ADC_TM functionality). In this case, we have VADC and ADC_TM functionality > combined into the same driver. > > Patch 1 is a cleanup, to move the QCOM ADC dt-bindings files from > dt-bindings/iio to dt-bindings/iio/adc folder, as they are > specifically for ADC devices. It also fixes all compilation errors > with this change in driver and devicetree files and similar errors > in documentation for dtbinding check. > > Patch 2 adds bindings for ADC5 Gen3 peripheral. > > Patch 3 adds the main driver for ADC5 Gen3. > > Patch 4 adds the auxiliary thermal driver which supports the ADC_TM > functionality of ADC5 Gen3. > > Changes since v3: > - Updated files affected by adc file path change in /arch/arm folder, > which were missed earlier. I don't think this was tested afterwards... Best regards, Krzysztof
PMIC5 Gen3 has a similar ADC architecture to that on PMIC5 Gen2, with all SW communication to ADC going through PMK8550 which communicates with other PMICs through PBS. The major difference is that the register interface used here is that of an SDAM present on PMK8550, rather than a dedicated ADC peripheral. There may be more than one SDAM used for ADC5 Gen3. Each ADC SDAM has eight channels, each of which may be used for either immediate reads (same functionality as previous PMIC5 and PMIC5 Gen2 ADC peripherals) or recurring measurements (same as PMIC5 and PMIC5 Gen2 ADC_TM functionality). In this case, we have VADC and ADC_TM functionality combined into the same driver. Patch 1 is a cleanup, to move the QCOM ADC dt-bindings files from dt-bindings/iio to dt-bindings/iio/adc folder, as they are specifically for ADC devices. It also fixes all compilation errors with this change in driver and devicetree files and similar errors in documentation for dtbinding check. Patch 2 adds bindings for ADC5 Gen3 peripheral. Patch 3 adds the main driver for ADC5 Gen3. Patch 4 adds the auxiliary thermal driver which supports the ADC_TM functionality of ADC5 Gen3. Changes since v3: - Updated files affected by adc file path change in /arch/arm folder, which were missed earlier. - Added ADC5 Gen3 documentation changes in existing qcom,spmi-vadc.yaml file instead of adding separate file and addressed reviewer comments for all bindings. - Addressed review comments in driver patch. Split out TM functionality into auxiliary driver in separate patch and added required changes in main driver. - Link to v3: https://lore.kernel.org/all/20231231171237.3322376-1-quic_jprakash@quicinc.com/ Changes since v2: - Reordered patches to keep cleanup change for ADC files first. - Moved ADC5 Gen3 documentation into a separate file Changes since v1: - Dropped patches 1-5 for changing 'ADC7' peripheral name to 'ADC5 Gen2'. - Addressed reviewer comments for binding and driver patches for ADC5 Gen3. - Combined patches 8-11 into a single patch as requested by reviewers to make the change clearer and made all fixes required in same patch. Jishnu Prakash (4): dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC iio: adc: Add support for QCOM PMIC5 Gen3 ADC thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring .../bindings/iio/adc/qcom,spmi-vadc.yaml | 226 +++++- .../bindings/mfd/qcom,spmi-pmic.yaml | 2 +- .../bindings/thermal/qcom-spmi-adc-tm-hc.yaml | 2 +- .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 6 +- arch/arm/boot/dts/qcom/pm8226.dtsi | 2 +- arch/arm/boot/dts/qcom/pm8941.dtsi | 2 +- arch/arm/boot/dts/qcom/pma8084.dtsi | 2 +- arch/arm/boot/dts/qcom/pmx55.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm4125.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm6125.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm6150.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm6150l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm660l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm7250b.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8950.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8953.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi632.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8950.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmp8074.dtsi | 2 +- arch/arm64/boot/dts/qcom/pms405.dtsi | 2 +- .../boot/dts/qcom/qcm6490-fairphone-fp5.dts | 4 +- .../boot/dts/qcom/qcm6490-shift-otter.dts | 4 +- arch/arm64/boot/dts/qcom/sc7280-idp.dts | 2 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 4 +- arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 2 +- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 +- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 6 +- .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +- .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 6 +- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 8 +- drivers/iio/adc/Kconfig | 25 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/qcom-spmi-adc5-gen3.c | 724 ++++++++++++++++++ drivers/iio/adc/qcom-spmi-adc5.c | 2 +- drivers/iio/adc/qcom-spmi-vadc.c | 2 +- drivers/thermal/qcom/Kconfig | 11 + drivers/thermal/qcom/Makefile | 1 + drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c | 489 ++++++++++++ .../iio/adc/qcom,spmi-adc5-gen3-pm8550.h | 46 ++ .../iio/adc/qcom,spmi-adc5-gen3-pm8550b.h | 85 ++ .../iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h | 22 + .../iio/adc/qcom,spmi-adc5-gen3-pmk8550.h | 52 ++ .../iio/{ => adc}/qcom,spmi-adc7-pm7325.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-pm8350.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-pm8350b.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-pmk8350.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-pmr735a.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-pmr735b.h | 2 +- .../iio/{ => adc}/qcom,spmi-adc7-smb139x.h | 2 +- .../iio/{ => adc}/qcom,spmi-vadc.h | 81 ++ include/linux/iio/adc/qcom-adc5-gen3-common.h | 233 ++++++ 60 files changed, 2032 insertions(+), 82 deletions(-) create mode 100644 drivers/iio/adc/qcom-spmi-adc5-gen3.c create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550.h create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550b.h create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pmk8550.h rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pm7325.h (98%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pm8350.h (98%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pm8350b.h (99%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pmk8350.h (97%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pmr735a.h (95%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-pmr735b.h (95%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-adc7-smb139x.h (93%) rename include/dt-bindings/iio/{ => adc}/qcom,spmi-vadc.h (77%) create mode 100644 include/linux/iio/adc/qcom-adc5-gen3-common.h base-commit: 6fb2fa9805c501d9ade047fc511961f3273cdcb5