[v4,0/2] iio: magnetometer: add support for Si7210

Message

Antoni Pokusinski Jan. 15, 2025, 8:16 p.m. UTC

This patch series adds support for the Si7210 Hall effect I2C sensor.
The driver currently supports the basic functionalities (i.e. making
temperature and magnetic field measurements and changing the
measurements scale) but I plan to add support for some other features in
the future as well (e.g. the digital output interrupt).

---
Changes since v3:
* si7210: fetch_measurement/read_raw: fix issue with endianess
* si7210: replace `if (ret < 0)` with `if (ret)` wherever possible
* si7210: read_raw: use SI metric prefixes (MICRO, MILLI)
* si7210: si7210_data: swap i2c_client with regmap
* si7210: read_otpreg_val: remove unnecessary cast
* si7210: minor formatting updates
(add missing trailing commas, spaces etc)
* si7210: probe: use devm_mutex_init
* si7210: add missing includes

Changes since v2:
* Makefile: fix alignment
* si7210: fetch_measurement: use temporary variable to read the
measurement instead of reading directly to `buf`
* si7210: read_raw: change `tmp` to `temp`
* si7210: read_raw: adjust temperature computation to match the spec better
* si7210: device_wake: do not init `ret` to 0
* si7210: MODULE_LICENSE: change license type to GPL
* si7210: minor improvements in comments

Changes since v1:
* dt-binding: add `vdd-supply`
* si7210: reorder includes in alphabetic order
* si7210: add comment for `fetch_lock`
* si7210: remove `otp_lock`
* si7210: fetch_measurement: change result type to __be16
* si7210: use guard(mutex) instead of scoped_guard
* si7210: read_raw: use FIELD_GET to get raw temperature value
* si7210: read_raw: return temperature in milli-celsius
* si7210: use regulator for getting the voltage
* si7210: si7210_device_wake: remove unnecessary cast
* si7210: si7210_device_init: use fsleep instead of usleep_range
* si7210: si7210_probe: remove i2c_set_clientdata()
* si7210: minor alignment and formatting fixes

Antoni Pokusinski (2):
  dt-bindings: iio: magnetometer: add binding for Si7210
  iio: magnetometer: si7210: add driver for Si7210

 .../iio/magnetometer/silabs,si7210.yaml       |  48 ++
 drivers/iio/magnetometer/Kconfig              |  11 +
 drivers/iio/magnetometer/Makefile             |   2 +
 drivers/iio/magnetometer/si7210.c             | 444 ++++++++++++++++++
 4 files changed, 505 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml
 create mode 100644 drivers/iio/magnetometer/si7210.c