mbox series

[v2,0/7] counter: Simplify count_read/count_write/signal_read

Message ID cover.1568792697.git.vilhelm.gray@gmail.com (mailing list archive)
Headers show
Series counter: Simplify count_read/count_write/signal_read | expand

Message

William Breathitt Gray Sept. 18, 2019, 7:52 a.m. UTC
Changes in v2:
 - Update the rest of the drivers under drivers/counter

The changes in this patchset will not affect the userspace interface.
Rather, these changes are intended to simplify the kernelspace Counter
callbacks for counter device driver authors.

The following main changes are proposed:

* Retire the opaque counter_count_read_value/counter_count_write_value
  structures and simply represent count data as an unsigned integer.

* Retire the opaque counter_signal_read_value structure and represent
  Signal data as a counter_signal_value enum.

These changes should reduce some complexity and code in the use and
implementation of the count_read, count_write, and signal_read
callbacks.

The opaque structures for Count data and Signal data were introduced
originally in anticipation of supporting various representations of
counter data (e.g. arbitrary-precision tallies, floating-point spherical
coordinate positions, etc). However, with the counter device drivers
that have appeared, it's become apparent that utilizing opaque
structures in kernelspace is not the best approach to take.

I believe it is best to let userspace applications decide how to
interpret the count data they receive. There are a couple of reasons why
it would be good to do so:

* Users use their devices in unexpected ways.

  For example, a quadrature encoder counter device is typically used to
  keep track of the position of a motor, but a user could set the device
  in a pulse-direction mode and instead use it to count sporadic rising
  edges from an arbitrary signal line unrelated to positioning. Users
  should have the freedom to decide what their data represents.

* Most counter devices represent data as unsigned integers anyway.

  For example, whether the device is a tally counter or position
  counter, the count data is represented to the user as an unsigned
  integer value. So specifying that one device is representing tallies
  while the other specifies positions does not provide much utility from
  an interface perspective.

For these reasons, the count_read and count_write callbacks have been
redefined to pass count data directly as unsigned long instead of passed
via opaque structures:

        count_read(struct counter_device *counter,
                   struct counter_count *count, unsigned long *val);
        count_write(struct counter_device *counter,
                    struct counter_count *count, unsigned long val);

Similarly, the signal_read is redefined to pass Signal data directly as
a counter_signal_value enum instead of via an opaque structure:

        signal_read(struct counter_device *counter,
                    struct counter_signal *signal,
                    enum counter_signal_value *val);

The counter_signal_value enum is simply the counter_signal_level enum
redefined to remove the references to the Signal data "level" data type.

William Breathitt Gray (7):
  counter: Simplify the count_read and count_write callbacks
  counter: Simplify the signal_read callback
  docs: driver-api: generic-counter: Update Count and Signal data types
  counter: 104-quad-8: Update count_read/count_write/signal_read
    callbacks
  counter: ftm-quaddec: Update count_read and count_write callbacks
  counter: stm32-lptimer-cnt: Update count_read callback
  counter: stm32-timer-cnt: Update count_read and count_write callbacks

 Documentation/driver-api/generic-counter.rst |  22 ++--
 drivers/counter/104-quad-8.c                 |  33 ++----
 drivers/counter/counter.c                    | 101 +++----------------
 drivers/counter/ftm-quaddec.c                |  14 +--
 drivers/counter/stm32-lptimer-cnt.c          |   5 +-
 drivers/counter/stm32-timer-cnt.c            |  17 +---
 include/linux/counter.h                      |  74 ++------------
 7 files changed, 53 insertions(+), 213 deletions(-)

Comments

William Breathitt Gray Sept. 18, 2019, 8:11 a.m. UTC | #1
On Wed, Sep 18, 2019 at 04:52:41PM +0900, William Breathitt Gray wrote:
> Changes in v2:
>  - Update the rest of the drivers under drivers/counter

Jonathan,

The TI eQEP driver also needs a patch for these changes if this patchset
is merged.

How would you like to handle the merge? We have an full cycle until the
5.5 merge window, so I can keep this patchset in my personal repository,
adding in the ChromeOS EC driver and Intel QEP driver when they are
ready, then send you a git pull request during the 5.5 merge window. Or
we can keep going as usual and merge this into your IIO repository, then
handle the TI eQEP driver when the time comes to merge.

William Breathitt Gray

> The changes in this patchset will not affect the userspace interface.
> Rather, these changes are intended to simplify the kernelspace Counter
> callbacks for counter device driver authors.
> 
> The following main changes are proposed:
> 
> * Retire the opaque counter_count_read_value/counter_count_write_value
>   structures and simply represent count data as an unsigned integer.
> 
> * Retire the opaque counter_signal_read_value structure and represent
>   Signal data as a counter_signal_value enum.
> 
> These changes should reduce some complexity and code in the use and
> implementation of the count_read, count_write, and signal_read
> callbacks.
> 
> The opaque structures for Count data and Signal data were introduced
> originally in anticipation of supporting various representations of
> counter data (e.g. arbitrary-precision tallies, floating-point spherical
> coordinate positions, etc). However, with the counter device drivers
> that have appeared, it's become apparent that utilizing opaque
> structures in kernelspace is not the best approach to take.
> 
> I believe it is best to let userspace applications decide how to
> interpret the count data they receive. There are a couple of reasons why
> it would be good to do so:
> 
> * Users use their devices in unexpected ways.
> 
>   For example, a quadrature encoder counter device is typically used to
>   keep track of the position of a motor, but a user could set the device
>   in a pulse-direction mode and instead use it to count sporadic rising
>   edges from an arbitrary signal line unrelated to positioning. Users
>   should have the freedom to decide what their data represents.
> 
> * Most counter devices represent data as unsigned integers anyway.
> 
>   For example, whether the device is a tally counter or position
>   counter, the count data is represented to the user as an unsigned
>   integer value. So specifying that one device is representing tallies
>   while the other specifies positions does not provide much utility from
>   an interface perspective.
> 
> For these reasons, the count_read and count_write callbacks have been
> redefined to pass count data directly as unsigned long instead of passed
> via opaque structures:
> 
>         count_read(struct counter_device *counter,
>                    struct counter_count *count, unsigned long *val);
>         count_write(struct counter_device *counter,
>                     struct counter_count *count, unsigned long val);
> 
> Similarly, the signal_read is redefined to pass Signal data directly as
> a counter_signal_value enum instead of via an opaque structure:
> 
>         signal_read(struct counter_device *counter,
>                     struct counter_signal *signal,
>                     enum counter_signal_value *val);
> 
> The counter_signal_value enum is simply the counter_signal_level enum
> redefined to remove the references to the Signal data "level" data type.
> 
> William Breathitt Gray (7):
>   counter: Simplify the count_read and count_write callbacks
>   counter: Simplify the signal_read callback
>   docs: driver-api: generic-counter: Update Count and Signal data types
>   counter: 104-quad-8: Update count_read/count_write/signal_read
>     callbacks
>   counter: ftm-quaddec: Update count_read and count_write callbacks
>   counter: stm32-lptimer-cnt: Update count_read callback
>   counter: stm32-timer-cnt: Update count_read and count_write callbacks
> 
>  Documentation/driver-api/generic-counter.rst |  22 ++--
>  drivers/counter/104-quad-8.c                 |  33 ++----
>  drivers/counter/counter.c                    | 101 +++----------------
>  drivers/counter/ftm-quaddec.c                |  14 +--
>  drivers/counter/stm32-lptimer-cnt.c          |   5 +-
>  drivers/counter/stm32-timer-cnt.c            |  17 +---
>  include/linux/counter.h                      |  74 ++------------
>  7 files changed, 53 insertions(+), 213 deletions(-)
> 
> -- 
> 2.23.0