Show patches with: none      |   19264 patches
« 1 2 3 4 … 192 193 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v4,5/5] iio: adc: ad7192: Add clock provider iio: adc: ad7192: Improvements - - - --- 2024-06-13 Alisa-Dariana Roman New
[v4,4/5] dt-bindings: iio: adc: ad7192: Add clock provider iio: adc: ad7192: Improvements - - - --- 2024-06-13 Alisa-Dariana Roman New
[v4,3/5] iio: adc: ad7192: Update clock config iio: adc: ad7192: Improvements - - - --- 2024-06-13 Alisa-Dariana Roman New
[v4,2/5] dt-bindings: iio: adc: ad7192: Update clock config iio: adc: ad7192: Improvements - - - --- 2024-06-13 Alisa-Dariana Roman New
[v4,1/5] iio: adc: ad7192: Clean up dev iio: adc: ad7192: Improvements - - - --- 2024-06-13 Alisa-Dariana Roman New
[v2,5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage iio: adc: use devm_regulator_get_enable_read_voltage round 1 - - - --- 2024-06-12 David Lechner New
[v2,4/5] iio: adc: ad7793: use devm_regulator_get_enable_read_voltage iio: adc: use devm_regulator_get_enable_read_voltage round 1 - - - --- 2024-06-12 David Lechner New
[v2,3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage iio: adc: use devm_regulator_get_enable_read_voltage round 1 - - - --- 2024-06-12 David Lechner New
[v2,2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage iio: adc: use devm_regulator_get_enable_read_voltage round 1 - - - --- 2024-06-12 David Lechner New
[v2,1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage iio: adc: use devm_regulator_get_enable_read_voltage round 1 - - - --- 2024-06-12 David Lechner New
[3/3] Documentation: iio: Document ad4695 driver iio: adc: ad4695: new driver for AD4695 and similar ADCs - - - --- 2024-06-12 David Lechner New
[2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs iio: adc: ad4695: new driver for AD4695 and similar ADCs - - - --- 2024-06-12 David Lechner New
[1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs iio: adc: ad4695: new driver for AD4695 and similar ADCs - - - --- 2024-06-12 David Lechner New
[RFC,3/3] iio: core annotate masklength as private iio: add helpers and accessors for active channels and masklength - - - --- 2024-06-12 Nuno Sa New
[RFC,2/3] iio: imu: adis16475: make use of iio_for_each_active_channel() iio: add helpers and accessors for active channels and masklength - - - --- 2024-06-12 Nuno Sa New
[RFC,1/3] iio: core: add new helper to iterate active channels iio: add helpers and accessors for active channels and masklength - - - --- 2024-06-12 Nuno Sa New
[v3,2/2] iio: adc: ad7192: Fix clock config iio: adc: ad7192: Fix clock config - - - --- 2024-06-12 Alisa-Dariana Roman New
[v3,1/2] dt-bindings: iio: adc: ad7192: Fix clock config iio: adc: ad7192: Fix clock config - - - --- 2024-06-12 Alisa-Dariana Roman New
[v5,8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-12 Judith Mendez New
[v5,7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-12 Judith Mendez New
[v5,6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-12 Judith Mendez New
[v5,5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-12 Judith Mendez New
[v5,4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-12 Judith Mendez New
[v5,3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-12 Judith Mendez New
[v5,2/8] counter/ti-eqep: Add new ti-am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-12 Judith Mendez New
[v5,1/8] dt-bindings: counter: Add new ti,am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms 1 1 - --- 2024-06-12 Judith Mendez New
[v4,2/2] iio: frequency: adf4350: add clk provider [v4,1/2] dt-bindings: iio: adf4350: add clk provider prop - - - --- 2024-06-12 Antoniu Miclaus New
[v4,1/2] dt-bindings: iio: adf4350: add clk provider prop [v4,1/2] dt-bindings: iio: adf4350: add clk provider prop 1 - - --- 2024-06-12 Antoniu Miclaus New
[v3,2/2] iio: frequency: adf4350: add clk provider [v3,1/2] dt-bindings: iio: adf4350: add clk provider prop - - - --- 2024-06-12 Antoniu Miclaus New
[v3,1/2] dt-bindings: iio: adf4350: add clk provider prop [v3,1/2] dt-bindings: iio: adf4350: add clk provider prop 1 - - --- 2024-06-12 Antoniu Miclaus New
[RESEND] iio: simplify with regmap_set_bits(), regmap_clear_bits() [RESEND] iio: simplify with regmap_set_bits(), regmap_clear_bits() 2 1 - --- 2024-06-11 Trevor Gamblin New
[v4,2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer [v4,1/2] iio: accel: st_accel: add support for LIS2DS12 - - - --- 2024-06-11 Kaustabh Chakraborty New
[v4,1/2] iio: accel: st_accel: add support for LIS2DS12 [v4,1/2] iio: accel: st_accel: add support for LIS2DS12 - 1 - --- 2024-06-11 Kaustabh Chakraborty New
[v4,8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-10 Judith Mendez New
[v4,7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-10 Judith Mendez New
[v4,6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-10 Judith Mendez New
[v4,5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-10 Judith Mendez New
[v4,4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-10 Judith Mendez New
[v4,3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-10 Judith Mendez New
[v4,2/8] counter/ti-eqep: Add new ti-am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-10 Judith Mendez New
[v4,1/8] dt-bindings: counter: Add new ti,am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms 1 1 - --- 2024-06-10 Judith Mendez New
[2/2] iio: bu27034: Add a read only HWARDWAREGAIN ROHM BU27034NUC to ROHM BU27034ANUC - - - --- 2024-06-10 Matti Vaittinen New
[1/2] bu27034: ROHM BU27034NUC to BU27034ANUC ROHM BU27034NUC to ROHM BU27034ANUC - - - --- 2024-06-10 Matti Vaittinen New
[v3,15/15] iio: chemical: bme680: Refactorize reading functions iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,14/15] iio: chemical: bme680: Move forced mode setup in ->read_raw() iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,13/15] iio: chemical: bme680: Remove redundant gas configuration iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,12/15] iio: chemical: bme680: Move probe errors to dev_err_probe() iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,11/15] iio: chemical: bme680: Modify startup procedure iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,10/15] iio: chemical: bme680: Make error checks consistent iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,09/15] iio: chemical: bme680: Add read buffers in read/write buffer union iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,08/15] iio: chemical: bme680: Allocate IIO device before chip initialization iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,07/15] iio: chemical: bme680: Use bulk reads for calibration data iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,06/15] iio: chemical: bme680: Remove duplicate register read iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,05/15] iio: chemical: bme680: Sort headers alphabetically iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,04/15] iio: chemical: bme680: Remove remaining ACPI-only stuff iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,03/15] iio: chemical: bme680: Drop unnecessary casts and correct adc data types iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,02/15] iio: chemical: bme680: Fix typo in define iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
[v3,01/15] iio: chemical: bme680: Fix read/write ops to device by adding mutexes iio: chemical: bme680: Driver cleanup - - - --- 2024-06-09 Vasileios Amoiridis New
counter: ti-eqep: implement over/underflow events counter: ti-eqep: implement over/underflow events - - - --- 2024-06-09 David Lechner New
counter: ti-eqep: enable clock at probe counter: ti-eqep: enable clock at probe - 1 - --- 2024-06-09 David Lechner New
[2/2] counter: ti-eqep: remove counter_priv() wrapper counter: ti-eqep: small cleanups - - - --- 2024-06-09 David Lechner New
[1/2] counter: ti-eqep: remove unused struct member counter: ti-eqep: small cleanups - 1 - --- 2024-06-09 David Lechner New
iio: dac: fix ad9739a random config compile error iio: dac: fix ad9739a random config compile error - - - --- 2024-06-09 Ke Sun Accepted
[v3,8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes Enable eQEP DT support for Sitara K3 platforms - - - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,2/8] counter/ti-eqep: Add new ti-am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms - 1 - --- 2024-06-07 Judith Mendez Handled Elsewhere
[v3,1/8] dt-bindings: counter: Add new ti,am62-eqep compatible Enable eQEP DT support for Sitara K3 platforms 1 1 - --- 2024-06-07 Judith Mendez Handled Elsewhere
iio: add missing MODULE_DESCRIPTION() macros iio: add missing MODULE_DESCRIPTION() macros - - - --- 2024-06-07 Jeff Johnson Accepted
[v7,9/9] iio: adc: ad7173: Add support for AD411x devices Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,8/9] iio: adc: ad7173: document sampling frequency behaviour Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,7/9] iio: adc: ad7173: refactor device info structs Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,6/9] iio: adc: ad7173: add support for special inputs Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,5/9] iio: adc: ad7173: refactor ain and vref selection Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,4/9] iio: adc: ad7173: refactor channel configuration parsing Add support for AD411x - 2 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,3/9] iio: adc: ad_sigma_delta: add disable_one callback Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,2/9] dt-bindings: adc: ad7173: add support for ad411x Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v7,1/9] dt-bindings: iio: adc: Add common-mode-channel property Add support for AD411x - 1 - --- 2024-06-07 Dumitru Ceclan via B4 Relay New
[v4,2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver iio:proximity:hx9023s: Add TYHX HX9023S sensor driver - - - --- 2024-06-07 Yasin Lee Changes Requested
[v4,1/2] dt-bindings:iio:proximity: Add hx9023s binding iio:proximity:hx9023s: Add TYHX HX9023S sensor driver - - - --- 2024-06-07 Yasin Lee Changes Requested
[v2] iio: humidity: si7020: add heater support [v2] iio: humidity: si7020: add heater support - - - --- 2024-06-07 Antoni Pokusinski Accepted
[v2,2/2] iio: frequency: adf4350: add clk provider [v2,1/2] dt-bindings: iio: adf4350: add clk provider prop - - - --- 2024-06-07 Antoniu Miclaus Changes Requested
[v2,1/2] dt-bindings: iio: adf4350: add clk provider prop [v2,1/2] dt-bindings: iio: adf4350: add clk provider prop 1 - - --- 2024-06-07 Antoniu Miclaus Changes Requested
iio: imu: inv_icm42600: add register caching in the regmap iio: imu: inv_icm42600: add register caching in the regmap - - - --- 2024-06-07 inv.git-commit@tdk.com Accepted
[v2,19/19] iio: chemical: bme680: Refactorize reading functions iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,18/19] iio: chemical: bme680: Move forced mode setup in ->read_raw() iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,17/19] iio: chemical: bme680: Remove redundant gas configuration iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,16/19] iio: chemical: bme680: Move probe errors to dev_err_probe() iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,15/19] iio: chemical: bme680: Modify startup procedure iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,14/19] iio: chemical: bme680: Make error checks consistent iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,13/19] iio: chemical: bme680: Add read buffers in union Untitled series #859707 - - - --- 2024-06-06 Vasileios Amoiridis Not Applicable
[v2,13/19] iio: chemical: bme680: Add read buffers in read/write buffer union Untitled series #859706 - - - --- 2024-06-06 Vasileios Amoiridis Not Applicable
[v2,13/19] iio: chemical: bme680: Add read buffers in DMA safe region iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,12/19] iio: chemical: bme680: Allocate IIO device before chip initialization iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,11/19] iio: chemical: bme680: Use bulk reads for calibration data iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,10/19] iio: chemical: bme680: Remove duplicate register read iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
[v2,09/19] iio: chemical: bme680: Sort headers alphabetically iio: chemical: bme680: Driver fixes and cleanup - - - --- 2024-06-06 Vasileios Amoiridis Changes Requested
« 1 2 3 4 … 192 193 »