Show patches with: State = Action Required       |    Archived = No       |   178 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v6,12/12] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,11/12] arm64: dts: qcom: add PMP8074 DTSI [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,10/12] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,09/12] pinctrl: qcom-pmic-gpio: add support for PMP8074 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,08/12] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,07/12] regulator: qcom_spmi: add support for PMP8074 regulators [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,06/12] dt-bindings: regulator: qcom,spmi-regulator: add PMP8074 PMIC [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - 1 - --- 2022-07-04 Robert Marko New
[v6,05/12] regulator: qcom_spmi: add support for HT_P600 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,04/12] regulator: qcom_spmi: add support for HT_P150 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,03/12] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - 1 - --- 2022-07-04 Robert Marko New
[v6,02/12] mfd: qcom-spmi-pmic: add support for PMP8074 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 - - - --- 2022-07-04 Robert Marko New
[v3,9/9] iio: adc: mcp3911: add support to set PGA Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,8/9] iio: adc: mcp3911: add support for oversampling ratio Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry Improve MCP3911 driver 1 - - --- 2022-07-04 Marcus Folkesson New
[v3,6/9] iio: adc: mcp3911: add support for interrupts Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,5/9] iio: adc: mcp3911: add support for buffers Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,3/9] iio: adc: mcp3911: use correct formula for AD conversion Improve MCP3911 driver 1 - - --- 2022-07-04 Marcus Folkesson New
[v3,2/9] iio: adc: mcp3911: correct "microchip,device-addr" property Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[v3,1/9] iio: adc: mcp3911: make use of the sign bit Improve MCP3911 driver - - - --- 2022-07-04 Marcus Folkesson New
[3/3] dt-bindings: iio: adc: add adi,max11410.yaml [1/3] iio: adc: add max11410 adc driver - 1 - --- 2022-07-04 Ibrahim Tilki New
[2/3] Documentation: ABI: testing: add max11410 doc [1/3] iio: adc: add max11410 adc driver - 1 - --- 2022-07-04 Ibrahim Tilki New
[1/3] iio: adc: add max11410 adc driver [1/3] iio: adc: add max11410 adc driver - 1 - --- 2022-07-04 Ibrahim Tilki New
[v3,2/2] iio: adc: Add rtq6056 support Add Richtek RTQ6056 support - 1 - --- 2022-07-04 ChiYuan Huang New
[v3,1/2] dt-bindings: iio: adc: Add rtq6056 adc support Add Richtek RTQ6056 support - 1 - --- 2022-07-04 ChiYuan Huang New
[v4,13/13] video: backlight: mt6370: Add Mediatek MT6370 support Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,12/13] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,11/13] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,10/13] power: supply: mt6370: Add Mediatek MT6370 charger driver Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,09/13] iio: adc: mt6370: Add Mediatek MT6370 support Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,07/13] mfd: mt6370: Add Mediatek MT6370 support Add Mediatek MT6370 PMIC support - - - --- 2022-07-04 ChiaEn Wu New
[v4,06/13] dt-bindings: mfd: Add Mediatek MT6370 Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v4,05/13] dt-bindings: backlight: Add Mediatek MT6370 backlight Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v4,04/13] dt-bindings: leds: Add Mediatek MT6370 flashlight Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v4,03/13] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v4,02/13] dt-bindings: power: supply: Add Mediatek MT6370 Charger Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v4,01/13] dt-bindings: usb: Add Mediatek MT6370 TCPC Add Mediatek MT6370 PMIC support - 1 - --- 2022-07-04 ChiaEn Wu New
[v2] Documentation: bno055: separate SPDX identifier and page title [v2] Documentation: bno055: separate SPDX identifier and page title - 1 - --- 2022-07-04 Bagas Sanjaya New
[v2,5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380 Add support for pressure sensor Bosch BMP380 - - - --- 2022-07-04 Angel Iglesias New
[v2,4/5] iio: pressure: bmp280: Add support for BMP380 sensor family Add support for pressure sensor Bosch BMP380 - - - --- 2022-07-04 Angel Iglesias New
[v2,3/5] iio: pressure: bmp280: simplify driver initialization logic Add support for pressure sensor Bosch BMP380 - - - --- 2022-07-04 Angel Iglesias New
[v2,2/5] iio: pressure: Kconfig: Add references to BMP380 Add support for pressure sensor Bosch BMP380 - - - --- 2022-07-04 Angel Iglesias New
[v2,1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string Add support for pressure sensor Bosch BMP380 1 - - --- 2022-07-04 Angel Iglesias New
[v4,10/10] iio: magnetometer: yas530: Add YAS537 variant Add support for magnetometer Yamaha YAS537 - 1 - --- 2022-07-03 Jakob Hauser New
[v4,09/10] iio: magnetometer: yas530: Introduce "chip_info" structure Add support for magnetometer Yamaha YAS537 - - - --- 2022-07-03 Jakob Hauser New
[v4,08/10] iio: magnetometer: yas530: Apply documentation and style fixes Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
[v4,07/10] iio: magnetometer: yas530: Move printk %*ph parameters out from stack Add support for magnetometer Yamaha YAS537 - - - --- 2022-07-03 Jakob Hauser New
[v4,06/10] iio: magnetometer: yas530: Rename functions and registers Add support for magnetometer Yamaha YAS537 - 1 - --- 2022-07-03 Jakob Hauser New
[v4,05/10] iio: magnetometer: yas530: Change data type of calibration coefficients Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
[v4,04/10] iio: magnetometer: yas530: Correct temperature handling Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
[v4,03/10] iio: magnetometer: yas530: Correct scaling of magnetic axes Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
[v4,02/10] iio: magnetometer: yas530: Change range of data in volatile register Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
[v4,01/10] iio: magnetometer: yas530: Change data type of hard_offsets to signed Add support for magnetometer Yamaha YAS537 - 2 - --- 2022-07-03 Jakob Hauser New
iio: proximity: sx9324: add empty line in front of bullet list iio: proximity: sx9324: add empty line in front of bullet list - 1 - --- 2022-07-03 Akira Yokosawa New
iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode - - - --- 2022-07-02 Marcus Folkesson New
[V1,1/1] iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: accel: sca3300: Extend the trigger buffer - - - --- 2022-07-01 LI Qingwu New
[net-next,v1,1/1] iio: adc: tsc2046: silent spi_device_id warning [net-next,v1,1/1] iio: adc: tsc2046: silent spi_device_id warning - - - --- 2022-06-30 Oleksij Rempel New
iio: humidity: dht11: Improve error reporting in .probe() iio: humidity: dht11: Improve error reporting in .probe() - - - --- 2022-06-30 Uwe Kleine-König New
[v6,3/3] arm64: dts: rockchip: Update joystick to polled for OG2 adc-joystick: Add polled support - - - --- 2022-06-29 Chris Morgan New
[v6,2/3] Input: adc-joystick - Add polled input device support adc-joystick: Add polled support 1 - - --- 2022-06-29 Chris Morgan New
[v6,1/3] dt-bindings: adc-joystick: add poll-interval-ms adc-joystick: Add polled support - - - --- 2022-06-29 Chris Morgan New
[v2,2/2] iio: adc: Add rtq6056 support Add Richtek RTQ6056 support - - - --- 2022-06-29 ChiYuan Huang New
[v2,1/2] dt-bindings: iio: adc: Add rtq6056 adc support Add Richtek RTQ6056 support - - - --- 2022-06-29 ChiYuan Huang New
[v5,3/3] arm64: dts: rockchip: Update joystick to polled for OG2 adc-joystick: Add polled support - - - --- 2022-06-28 Chris Morgan New
[v5,2/3] Input: adc-joystick - Add polled input device support adc-joystick: Add polled support - - - --- 2022-06-28 Chris Morgan New
[v5,1/3] dt-bindings: adc-joystick: add poll-interval-ms adc-joystick: Add polled support - - - --- 2022-06-28 Chris Morgan New
[v2,19/19] iio: adc: at91-sama5d2_adc: add runtime pm support iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,18/19] iio: adc: at91-sama5d2_adc: add empty line after functions iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel iio: adc: at91-sama5d2_adc: add support for temperature sensor 1 - - --- 2022-06-28 Claudiu Beznea New
[v2,15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw() iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_sam… iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,13/19] iio: adc: at91-sama5d2_adc: update trackx on emr iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v2,01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX iio: adc: at91-sama5d2_adc: add support for temperature sensor - - - --- 2022-06-28 Claudiu Beznea New
[v7,2/2] iio: adc: ad4130: add AD4130 driver AD4130 - - - --- 2022-06-28 Cosmin Tanislav New
[v7,1/2] dt-bindings: iio: adc: add AD4130 AD4130 - 1 - --- 2022-06-28 Cosmin Tanislav New
[v6,2/2] iio: adc: ad4130: add AD4130 driver AD4130 - 1 - --- 2022-06-28 Cosmin Tanislav New
[v6,1/2] dt-bindings: iio: adc: add AD4130 AD4130 - - - --- 2022-06-28 Cosmin Tanislav New
[v4,3/3] arm64: dts: rockchip: Update joystick to polled for Odroid-Go2 adc-joystick: Add polled support - - - --- 2022-06-27 Chris Morgan New
[v4,2/3] Input: adc-joystick - Add polled input device support adc-joystick: Add polled support - - - --- 2022-06-27 Chris Morgan New
[v4,1/3] dt-bindings: adc-joystick: add poll-interval adc-joystick: Add polled support - - - --- 2022-06-27 Chris Morgan New
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: fix iio_format_avail_range() printing for none IIO_VAL_INT - - - --- 2022-06-27 Jean-Baptiste Maneyrol New
[4/4] iio: ABI: sx9324: Squash some formatting to keep scripting happy. IIO: Some documentation error and warning fixes. - - - --- 2022-06-26 Jonathan Cameron New
[3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc. IIO: Some documentation error and warning fixes. - 1 - --- 2022-06-26 Jonathan Cameron New
[2/4] iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs. IIO: Some documentation error and warning fixes. - 1 - --- 2022-06-26 Jonathan Cameron New
[1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection. IIO: Some documentation error and warning fixes. - 1 - --- 2022-06-26 Jonathan Cameron New
iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read() iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read() - - - --- 2022-06-26 Jonathan Cameron New
« 1 2 »