Show patches with: Archived = No       |   12397 patches
« 1 2 ... 12 13 14 … 123 124 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v3,6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs iio: adc: ad7606: add support for AD7606C-{16,18} parts - 1 - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,5/8] iio: adc: ad7606: rework available attributes for SW channels iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,4/8] iio: adc: ad7606: wrap channel ranges & scales into struct iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,3/8] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct() iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,1/8] iio: adc: ad7606: add 'bits' parameter to channels macros iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-04 Alexandru Ardelean Changes Requested
[v3,2/2] iio: dac: support the ad8460 Waveform DAC Add support to AD8460 Waveform Generator DAC - - - --- 2024-09-04 Mariel Tinaco Changes Requested
[v3,1/2] dt-bindings: iio: dac: add docs for ad8460 Add support to AD8460 Waveform Generator DAC - - - --- 2024-09-04 Mariel Tinaco Changes Requested
[v2] tools/counter: Close fd when exit [v2] tools/counter: Close fd when exit - - - --- 2024-09-04 zhangjiao2 Handled Elsewhere
[v1,3/3] iio: proximity: sx_common: Drop unused acpi.h iio: reduce acpi.h usage - - - --- 2024-09-03 Andy Shevchenko Accepted
[v1,2/3] iio: proximity: sx_common: Unexport sx_common_get_raw_register_config() iio: reduce acpi.h usage - - - --- 2024-09-03 Andy Shevchenko Accepted
[v1,1/3] iio: imu: fxos8700: Drop unused acpi.h iio: reduce acpi.h usage - - - --- 2024-09-03 Andy Shevchenko Accepted
[v2,3/3] iio: hid-sensor: Use aligned data type for timestamp iio: Introduce and use aligned_s64 type - - - --- 2024-09-03 Andy Shevchenko Accepted
[v2,2/3] iio: imu: st_lsm6dsx: Use aligned data type for timestamp iio: Introduce and use aligned_s64 type - - - --- 2024-09-03 Andy Shevchenko Accepted
[v2,1/3] types: Complement the aligned types with signed 64-bit one iio: Introduce and use aligned_s64 type - - - --- 2024-09-03 Andy Shevchenko Accepted
iio: imu: inv_mpu6050: Move setting 'wom_bits' to probe function iio: imu: inv_mpu6050: Move setting 'wom_bits' to probe function - - - --- 2024-09-03 gyeyoung Changes Requested
tools/counter: close fd when exit tools/counter: close fd when exit - - - --- 2024-09-03 zhangjiao2 Handled Elsewhere
[v3,2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support Continuous mode support for VL53l0x - - - --- 2024-09-03 Abhash Jha Changes Requested
[v3,1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check Continuous mode support for VL53l0x - - - --- 2024-09-03 Abhash Jha Changes Requested
HID: hid-sensor-custom: Convert comma to semicolon HID: hid-sensor-custom: Convert comma to semicolon - - - --- 2024-09-03 Chen Ni Handled Elsewhere
[v1,22/22] iio: pressure: hid-sensor-press: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,21/22] iio: position: hid-sensor-custom-intel-hinge: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,20/22] iio: orientation: hid-sensor-rotation: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,19/22] iio: orientation: hid-sensor-incl-3d: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,18/22] iio: magnetometer: hid-sensor-magn-3d: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,17/22] iio: light: lm3533-als: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - 1 - --- 2024-09-02 Andy Shevchenko Accepted
[v1,16/22] iio: light: hid-sensor-prox: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,15/22] iio: light: hid-sensor-als: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,14/22] iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,13/22] iio: gyro: hid-sensor-gyro-3d: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,12/22] iio: frequency: adf4350: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,11/22] iio: frequency: ad9523: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,10/22] iio: dac: max517: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,09/22] iio: dac: m62332: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,08/22] iio: dac: ad5791: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,07/22] iio: dac: ad5504: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,06/22] iio: adc: ltc2497: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,05/22] iio: adc: ad7793: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,04/22] iio: adc: ad7887: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,03/22] iio: adc: ad7791: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,02/22] iio: adc: ad7266: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v1,01/22] iio: accel: hid-sensor-accel-3d: Get platform data via dev_get_platdata() iio: use dev_get_platdata() to access platform_data - - - --- 2024-09-02 Andy Shevchenko Accepted
[v5,7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration pressure: bmp280: Minor cleanup and interrupt support - 1 - --- 2024-09-02 Vasileios Amoiridis Changes Requested
[v5,6/7] iio: pressure: bmp280: Add data ready trigger support pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Changes Requested
[v5,5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Changes Requested
[v5,4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Changes Requested
[v5,3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Accepted
[v5,2/7] iio: pressure: bmp280: Add support for bmp280 soft reset pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Accepted
[v5,1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data pressure: bmp280: Minor cleanup and interrupt support - - - --- 2024-09-02 Vasileios Amoiridis Accepted
[2/2] dt-bindings: iio: temperature: tmp006: document interrupt iio: temperature: tmp006: support for drdy irq - - - --- 2024-09-02 Antoni Pokusinski Changes Requested
[1/2] iio: temperature: tmp006: add triggered buffer support iio: temperature: tmp006: support for drdy irq - - - --- 2024-09-02 Antoni Pokusinski Changes Requested
[v2,2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support Continuous mode support for VL53l0x - - - --- 2024-09-02 Abhash Jha Superseded
[v2,1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check Continuous mode support for VL53l0x - - - --- 2024-09-02 Abhash Jha Superseded
[-next] counter: ftm-quaddec: Enable module autoloading [-next] counter: ftm-quaddec: Enable module autoloading - - - --- 2024-09-02 Liao Chen Handled Elsewhere
iio/inv_icm42600: add inv_icm42600 id_table iio/inv_icm42600: add inv_icm42600 id_table 1 - - --- 2024-09-02 jason liu Changes Requested
[v2,8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,5/8] iio: adc: ad7606: rework available attributes for SW channels iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,4/8] iio: adc: ad7606: wrap channel ranges & scales into struct iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,3/8] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct() iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
[v2,1/8] iio: adc: ad7606: add 'bits' parameter to channels macros iio: adc: ad7606: add support for AD7606C-{16,18} parts - - - --- 2024-09-02 Alexandru Ardelean Changes Requested
iio: proximity: hx9023s: Use 'CLOCK_BOOTTIME' as the default clock source iio: proximity: hx9023s: Use 'CLOCK_BOOTTIME' as the default clock source - - - --- 2024-09-02 Yasin Lee Rejected
iio/inv_icm42600: add inv_icm42600 id_table iio/inv_icm42600: add inv_icm42600 id_table - - - --- 2024-09-02 jason liu Changes Requested
iio/inv_icm42600: add inv_icm42600 id_table iio/inv_icm42600: add inv_icm42600 id_table - - - --- 2024-09-02 jason liu Changes Requested
[2/2] iio: imu: Add i2c driver for bmi270 imu Add I2C driver for Bosch BMI270 IMU - - - --- 2024-09-01 Alex Lanzano Changes Requested
[1/2] dt-bindings: iio: imu: add bmi270 bindings Add I2C driver for Bosch BMI270 IMU - - - --- 2024-09-01 Alex Lanzano Changes Requested
[15/15] iio: pressure: bmp280: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - 1 --- 2024-09-01 Jonathan Cameron Accepted
[14/15] iio: magn: ak8974: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[13/15] iio: light: st_uvis25: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[12/15] iio: imu: st_lsm6dsx: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[11/15] iio: imu: inv_mpu6050: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[10/15] iio: imu: inv_icm42600: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[09/15] iio: imu: bmi323: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[08/15] iio: imu: bmi160: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[07/15] iio: humidity: hts221: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[06/15] iio: gyro: mpu3050: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[05/15] iio: gyro: fxas21002c: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[04/15] iio: common: st: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[03/15] iio: adc: ti-ads1015: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[02/15] iio: accel: fxls8962af: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - 1 - --- 2024-09-01 Jonathan Cameron Accepted
[01/15] iio: accel: adxl380: use irq_get_trigger_type() IIO: use irq_get_trigger_type() instead of opencoding. - - - --- 2024-09-01 Jonathan Cameron Accepted
[v2] iio: imu: inv_mpu6050: Remove duplicate code between labels [v2] iio: imu: inv_mpu6050: Remove duplicate code between labels - - - --- 2024-09-01 gyeyoung Accepted
iio: imu: inv_mpu6050: Remove duplicate code between labels iio: imu: inv_mpu6050: Remove duplicate code between labels - - - --- 2024-09-01 gyeyoung Superseded
[2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support Continuous mode support for VL53l0x - - - --- 2024-08-30 Abhash Jha Changes Requested
[1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check Continuous mode support for VL53l0x - - - --- 2024-08-30 Abhash Jha Changes Requested
[GIT,PULL] Immutable branch between MFD, IIO and Power due for the v6.12 merge window [GIT,PULL] Immutable branch between MFD, IIO and Power due for the v6.12 merge window - - - --- 2024-08-30 Lee Jones Accepted
[RFC,8/8] iio: ABI: add DAC sysfs synchronous_mode parameter iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,7/8] iio: dac: ad3552r: add axi platform driver iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended) iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,5/8] iio: dac: ad3552r: changes to use FIELD_PREP iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,4/8] dt-bindings: iio: dac: add adi axi-dac bus property iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,3/8] iio: backend adi-axi-dac: backend features iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,2/8] iio: backend: extend features iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[RFC,1/8] dt-bindings: iio: dac: ad3552r: add io-backend property iio: dac: introducing ad3552r-axi - - - --- 2024-08-29 Angelo Dureghello Changes Requested
[v5,3/3] riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B Add SARADC support on Sophgo CV18XX series - 1 - --- 2024-08-29 Thomas Bonnefille Handled Elsewhere
[v5,2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC Add SARADC support on Sophgo CV18XX series - - - --- 2024-08-29 Thomas Bonnefille Accepted
[v5,1/3] dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC Add SARADC support on Sophgo CV18XX series - 1 - --- 2024-08-29 Thomas Bonnefille Accepted
tools: iio: rm .*.cmd when make clean tools: iio: rm .*.cmd when make clean - - - --- 2024-08-29 zhangjiao2 Accepted
« 1 2 ... 12 13 14 … 123 124 »