Show patches with: Archived = No       |   9919 patches
« 1 2 ... 62 63 64 … 99 100 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[V3,5/6] iio: accel: bmi088: Add support for bmi090l accel iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-18 LI Qingwu Superseded
[V3,4/6] iio: accel: bmi088: Add support for bmi085 accel iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-18 LI Qingwu Superseded
[V3,3/6] iio: accel: bmi088: modified the device name iio: accel: bmi088: support BMI085 BMI090L - - - --- 2022-05-18 LI Qingwu Superseded
[V3,2/6] iio: accel: bmi088: Make it possible to config scales iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-18 LI Qingwu Superseded
[V3,1/6] iio: accel: bmi088: Modified the scale calculate iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-18 LI Qingwu Superseded
[v2,2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt - - - --- 2022-05-18 Eddie James Changes Requested
[v2,1/2] iio: pressure: dps310: Refactor startup procedure iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt - - - --- 2022-05-18 Eddie James Changes Requested
iio: vadc: Fix potential dereference of NULL pointer iio: vadc: Fix potential dereference of NULL pointer - - - --- 2022-05-18 刘永志 Superseded
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() - 2 - --- 2022-05-17 Jialin Zhang Accepted
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() - - - --- 2022-05-17 Jialin Zhang Accepted
[v2,2/2] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADC IRQ handling on STM32F4 - 1 - --- 2022-05-16 Yannick Brosseau Accepted
[v2,1/2] iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: stm32: Fix ADC IRQ handling on STM32F4 - 1 - --- 2022-05-16 Yannick Brosseau Accepted
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data - - - --- 2022-05-16 Miaoqian Lin Accepted
[8/8] iio:light:vcnl4035: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[7/8] iio:light:vcnl4000: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[6/8] iio:light:us5182d: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[5/8] iio:light:pa12203001: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[4/8] iio:chemical:ccs811: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[3/8] iio:chemical:atlas: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[2/8] iio:adc:ti-ads1015: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[1/8] iio:adc:ina2xx: Improve error reporting for problems during .remove() iio: Improve error reporting for problems during .remove for various i2c drivers - - - --- 2022-05-15 Uwe Kleine-König Accepted
[v5,2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label() Add RZ/G2UL ADC support - 1 - --- 2022-05-15 Biju Das Accepted
[v5,1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC Add RZ/G2UL ADC support 1 2 - --- 2022-05-15 Biju Das Accepted
iio: accel: adxl367: do not update FIFO watermark on scan mode update iio: accel: adxl367: do not update FIFO watermark on scan mode update - - - --- 2022-05-14 Cosmin Tanislav Accepted
iio:magnetometer:mbc150: Make bmc150_magn_remove() return void iio:magnetometer:mbc150: Make bmc150_magn_remove() return void - - - --- 2022-05-14 Uwe Kleine-König Accepted
io:health:afe4404: Remove duplicated error reporting in .remove() io:health:afe4404: Remove duplicated error reporting in .remove() - - - --- 2022-05-14 Uwe Kleine-König Accepted
iio: imu: bmi160: Fix the error handling at bmi160_chip_init() iio: imu: bmi160: Fix the error handling at bmi160_chip_init() - - - --- 2022-05-13 Zheyu Ma Not Applicable
[V6,5/5] iio: accel: sca3300: Add inclination channels iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-13 LI Qingwu Changes Requested
[V6,4/5] iio: accel: sca3300: Add support for SCL3300 iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-13 LI Qingwu Changes Requested
[V6,3/5] iio: accel: sca3300: modified to support multi chips iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-13 LI Qingwu Changes Requested
[V6,2/5] iio: accel: sca3300: add define for temp channel for reuse. iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-13 LI Qingwu Changes Requested
[V6,1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300 iio: accel: sca3300: add compatible for scl3300 - 1 - --- 2022-05-13 LI Qingwu Changes Requested
[v4,5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Changes Requested
[v4,4/5] proximity: vl53l0x: Handle the reset GPIO Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Changes Requested
[v4,3/5] proximity: vl53l0x: Handle the VDD regulator Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Changes Requested
[v4,2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Changes Requested
[v4,1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Changes Requested
[v2,2/2] iio: humidity: si7020: Check device property for skipping reset in probe iio: humidity: si7020: Check device property for skipping reset in probe - - - --- 2022-05-12 Eddie James Changes Requested
[v2,1/2] dt-bindings: iio: humidity: Add si7020 bindings iio: humidity: si7020: Check device property for skipping reset in probe - - - --- 2022-05-12 Eddie James Changes Requested
[V5,5/5] iio: accel: sca3300: Add inclination channels iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-12 LI Qingwu Superseded
[V5,4/5] iio: accel: sca3300: Add support for SCL3300 iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-12 LI Qingwu Superseded
[V5,3/5] iio: accel: sca3300: modified to support multi chips iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-12 LI Qingwu Superseded
[V5,2/5] iio: accel: sca3300: add define for temp channel for reuse. iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-12 LI Qingwu Superseded
[V5,1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300 iio: accel: sca3300: add compatible for scl3300 - 1 - --- 2022-05-12 LI Qingwu Superseded
[v3,5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Superseded
[v3,4/5] proximity: vl53l0x: Handle the reset GPIO Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Superseded
[v3,3/5] proximity: vl53l0x: Handle the VDD regulator Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Superseded
[v3,2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Superseded
[v3,1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties Add support for ToF sensor on Yoshino platform - - - --- 2022-05-12 Markuss Broks Superseded
[4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels Untitled series #640726 - 1 - --- 2022-05-11 Marijn Suijten Changes Requested
[v2,5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support Add support for ToF sensor on Yoshino platform - - - --- 2022-05-11 Markuss Broks Superseded
[v2,4/5] proximity: vl53l0x: Handle the reset GPIO Add support for ToF sensor on Yoshino platform - - - --- 2022-05-11 Markuss Broks Superseded
[v2,3/5] proximity: vl53l0x: Handle the VDD regulator Add support for ToF sensor on Yoshino platform - - - --- 2022-05-11 Markuss Broks Superseded
[v2,2/5] proximity: vl53l0x: Prefer already initialized interrupt flags Add support for ToF sensor on Yoshino platform - - - --- 2022-05-11 Markuss Broks Superseded
[v2,1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties Add support for ToF sensor on Yoshino platform 1 - - --- 2022-05-11 Markuss Broks Superseded
iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt - - - --- 2022-05-11 Eddie James Changes Requested
[2/2] iio: humidity: si7020: Check device property for skipping reset in probe iio: humidity: si7020: Check device property for skipping reset in probe - - - --- 2022-05-11 Eddie James Changes Requested
[1/2] dt-bindings: iio: humidity: Add si7020 bindings iio: humidity: si7020: Check device property for skipping reset in probe - - - --- 2022-05-11 Eddie James Changes Requested
iio: adc: stm32-adc: Use generic_handle_domain_irq() iio: adc: stm32-adc: Use generic_handle_domain_irq() - - - --- 2022-05-11 Sebastian Andrzej Siewior Accepted
[v4,3/3] iio: light: Add support for ltrf216a sensor Add LTRF216A Driver - - - --- 2022-05-11 Shreeya Patel Changes Requested
[v4,2/3] dt-bindings: Document ltrf216a light sensor bindings Add LTRF216A Driver - - - --- 2022-05-11 Shreeya Patel Changes Requested
[v4,1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix Add LTRF216A Driver - 1 - --- 2022-05-11 Shreeya Patel Changes Requested
[v2] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability [v2] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability - - - --- 2022-05-11 Miclaus, Antoniu Accepted
[v4,2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label() Add RZ/G2UL ADC support - 1 - --- 2022-05-11 Biju Das Superseded
[v4,1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC Add RZ/G2UL ADC support - 2 - --- 2022-05-11 Biju Das Superseded
[v3,2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label() Add RZ/G2UL ADC support - 1 - --- 2022-05-11 Biju Das Superseded
[v3,1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC Add RZ/G2UL ADC support - - - --- 2022-05-11 Biju Das Superseded
[5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support Add support for ToF sensor on Yoshino platform - - - --- 2022-05-10 Markuss Broks Superseded
[4/5] proximity: vl53l0x: Handle the reset GPIO Add support for ToF sensor on Yoshino platform - - - --- 2022-05-10 Markuss Broks Superseded
[3/5] proximity: vl53l0x: Handle the VDD regulator Add support for ToF sensor on Yoshino platform - - - --- 2022-05-10 Markuss Broks Superseded
[2/5] proximity: vl53l0x: Get interrupt type from DT Add support for ToF sensor on Yoshino platform - - - --- 2022-05-10 Markuss Broks Superseded
[1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties Add support for ToF sensor on Yoshino platform - - - --- 2022-05-10 Markuss Broks Superseded
[8/8] iio: dac: cio-dac: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Accepted
[7/8] iio: adc: stx104: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Accepted
[6/8] gpio: ws16c48: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[5/8] gpio: gpio-mm: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[4/8] gpio: 104-idio-16: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[3/8] gpio: 104-idi-48: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[2/8] gpio: 104-dio-48e: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[1/8] counter: 104-quad-8: Utilize iomap interface Utilize iomap interface for PC104 and friends - - - --- 2022-05-10 William Breathitt Gray Handled Elsewhere
[V2,6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings iio: accel: bmi088: support BMI085 BMI090L - - - --- 2022-05-10 LI Qingwu Changes Requested
[V2,5/6] iio: accel: bmi088: Add support for bmi090l accel iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-10 LI Qingwu Changes Requested
[V2,4/6] iio: accel: bmi088: Add support for bmi085 accel iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-10 LI Qingwu Changes Requested
[V2,3/6] iio: accel: bmi088: modified the device name iio: accel: bmi088: support BMI085 BMI090L - - - --- 2022-05-10 LI Qingwu Changes Requested
[V2,2/6] iio: accel: bmi088: Make it possible to config scales iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-10 LI Qingwu Changes Requested
[V2,1/6] iio: accel: bmi088: Modified the scale calculate iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-10 LI Qingwu Changes Requested
iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() - 1 - --- 2022-05-10 Zheyu Ma Accepted
[V1,5/5] iio: accel: bmi088: modifed the device name. iio: accel: bmi088: support BMI085 BMI090L - - - --- 2022-05-09 LI Qingwu Superseded
[V1,4/5] iio: accel: bmi088: Make it possible to config scales. iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-09 LI Qingwu Superseded
[V1,3/5] iio: accel: bmi088: Add support for bmi090l accel iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-09 LI Qingwu Superseded
[V1,2/5] iio: accel: bmi088: Add support for bmi085 accel. iio: accel: bmi088: support BMI085 BMI090L - 1 - --- 2022-05-09 LI Qingwu Superseded
[V1,1/5] iio: accel: bmi088: Modified the scale calculate iio: accel: bmi088: support BMI085 BMI090L - - - --- 2022-05-09 LI Qingwu Superseded
iio: adc: fix return error variable iio: adc: fix return error variable - 1 - --- 2022-05-09 CGEL Accepted
[V4,5/5] iio: accel: sca3300: Add inclination channels iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-09 LI Qingwu Superseded
[V4,4/5] iio: accel: sca3300: Add support for SCL3300 iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-09 LI Qingwu Superseded
[V4,3/5] iio: accel: sca3300: modified to support multi chips iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-09 LI Qingwu Superseded
[V4,2/5] iio: accel: sca3300: add define for temp channel for reuse. iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-09 LI Qingwu Superseded
[V4,1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300 iio: accel: sca3300: add compatible for scl3300 - - - --- 2022-05-09 LI Qingwu Superseded
[v2,92/92] iio: temp: maxim_thermocouple: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron Accepted
[v2,91/92] iio: temp: max31865: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron Accepted
« 1 2 ... 62 63 64 … 99 100 »