Show patches with: State = Action Required       |    Archived = No       |   136 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support [1/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support - 1 - --- 2024-02-20 Vasileios Amoiridis New
[1/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver [1/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver 1 1 - --- 2024-02-20 Vasileios Amoiridis New
[1/2] iio: accel: adxl367: fix DEVID read after reset [1/2] iio: accel: adxl367: fix DEVID read after reset - 1 - --- 2024-02-07 Cosmin Tanislav New
[1/2] iio: adc: ti-ads1298: Fix error code in probe() [1/2] iio: adc: ti-ads1298: Fix error code in probe() 1 - - --- 2024-02-22 Dan Carpenter New
[1/4] iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: humidity: hdc3020: add power and reset management - - - --- 2024-02-20 Javier Carrasco New
[1/5] iio: core: move to cleanup.h magic iio: move IIO to the cleanup.h magic - - - --- 2024-02-21 Nuno Sa via B4 Relay New
[1/6] iio: temperature: ltc2983: make use of spi_get_device_match_data() iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[1/8] iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based. IIO: Convert DT specific handling over to fwnode - - - --- 2024-02-18 Jonathan Cameron New
[1/8] iio: light: vl6180: Drop unused linux/of.h include IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[1/8] of: Add cleanup.h based auto release via __free(device_node) markings. of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[2/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support [1/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver 1 1 - --- 2024-02-20 Vasileios Amoiridis New
[2/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver [1/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support - - - --- 2024-02-20 Vasileios Amoiridis New
[2/2] iio: accel: adxl367: fix I2C FIFO data register [1/2] iio: accel: adxl367: fix DEVID read after reset - 1 - --- 2024-02-07 Cosmin Tanislav New
[2/2] iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq() [1/2] iio: adc: ti-ads1298: Fix error code in probe() - - - --- 2024-02-22 Dan Carpenter New
[2/4] iio: humidity: hdc3020: add power management iio: humidity: hdc3020: add power and reset management - - - --- 2024-02-20 Javier Carrasco New
[2/5] iio: events: move to the cleanup.h magic iio: move IIO to the cleanup.h magic - - - --- 2024-02-21 Nuno Sa via B4 Relay New
[2/6] iio: temperature: ltc2983: rename ltc2983_parse_dt() iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[2/8] iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe IIO: Convert DT specific handling over to fwnode - - - --- 2024-02-18 Jonathan Cameron New
[2/8] iio: light: al3320a: Drop unused linux/of.h include IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[3/4] dt-bindings: iio: humidity: hdc3020: add reset-gpios iio: humidity: hdc3020: add power and reset management - 1 - --- 2024-02-20 Javier Carrasco New
[3/5] iio: trigger: move to the cleanup.h magic iio: move IIO to the cleanup.h magic - - - --- 2024-02-21 Nuno Sa via B4 Relay New
[3/6] iio: temperature: ltc2983: convert to dev_err_probe() iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling IIO: Convert DT specific handling over to fwnode - 1 - --- 2024-02-18 Jonathan Cameron New
[3/8] iio: light: al3010: Switch from linux/of.h to linux/mod_devicetable.h IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[3/8] of: unittest: Use for_each_child_of_node_scoped() of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[4/4] iio: humidity: hdc3020: add reset management iio: humidity: hdc3020: add power and reset management - - - --- 2024-02-20 Javier Carrasco New
[4/5] iio: buffer: iio: core: move to the cleanup.h magic iio: move IIO to the cleanup.h magic - - - --- 2024-02-21 Nuno Sa via B4 Relay New
[4/6] iio: temperature: ltc2983: explicitly set the name in chip_info iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[4/8] iio: adc: ad7292: Switch from of specific to fwnode property handling IIO: Convert DT specific handling over to fwnode - 1 - --- 2024-02-18 Jonathan Cameron New
[4/8] iio: adc: ads8688: Switch to mod_devicetable.h for struct of_device_id definition IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[4/8] iio: adc: fsl-imx25-gcq: Use for_each_available_child_node_scoped() of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[5/5] iio: inkern: move to the cleanup.h magic iio: move IIO to the cleanup.h magic - - - --- 2024-02-21 Nuno Sa via B4 Relay New
[5/6] dt-bindings: iio: temperature: ltc2983: document power supply iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[5/8] iio: accel: adxl372: Switch from linux/of.h to linux/mod_devicetable.h IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[5/8] iio: adc: ad7192: Convert from of specific to fwnode property handling IIO: Convert DT specific handling over to fwnode - 1 - --- 2024-02-18 Jonathan Cameron New
[5/8] iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped() of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[6/6] iio: temperature: ltc2983: support vdd regulator iio: temperature: ltc2983: small improvements - - - --- 2024-02-22 Nuno Sa New
[6/8] iio: accel: bma180: Switch from linux/of.h to linux/mod_devicetable.h IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[6/8] iio: accel: mma8452: Switch from of specific to fwnode property handling. IIO: Convert DT specific handling over to fwnode - - - --- 2024-02-18 Jonathan Cameron New
[6/8] iio: adc: ad7124: Use for_each_available_child_of_node_scoped() of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties. IIO: Convert DT specific handling over to fwnode - - - --- 2024-02-18 Jonathan Cameron New
[7/8] iio: accel: kxsd9: Switch from linux/of.h to linux/mod_devicetable.h IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[7/8] iio: adc: ad7292: Use for_each_available_child_of_node_scoped() of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[8/8] iio: adc: adi-axi-adc: Use __free(device_node) and guard(mutex) of: automate of_node_put() - new approach to loops. - - - --- 2024-02-11 Jonathan Cameron New
[8/8] iio: adc: hx711: Switch from of specific to fwnode property handling. IIO: Convert DT specific handling over to fwnode - - - --- 2024-02-18 Jonathan Cameron New
[8/8] iio: dac: mcp4821: Switch to including mod_devicetable.h for struct of_device_id definition. IIO: Drop incorrect includes of linux/of.h - - - --- 2024-02-18 Jonathan Cameron New
[PULL] IIO: 1st set of fixes for the 6.8 cycle. [PULL] IIO: 1st set of fixes for the 6.8 cycle. - - - --- 2024-02-11 Jonathan Cameron New
[PULL] IIO: First set of new device support, features and cleanup for 6.9 [PULL] IIO: First set of new device support, features and cleanup for 6.9 - - - --- 2024-02-22 Jonathan Cameron New
[RFC,1/8] iio: buffer: add function to set the buffer direction iio: dac: support IIO backends on the output direction - - - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,2/8] iio: buffer-dma: Rename iio_dma_buffer_data_available() iio: dac: support IIO backends on the output direction - - - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,3/8] iio: buffer-dma: Enable buffer write support iio: dac: support IIO backends on the output direction - 1 - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,4/8] iio: buffer-dmaengine: Support specifying buffer direction iio: dac: support IIO backends on the output direction - 1 - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,5/8] iio: buffer-dmaengine: Enable write support iio: dac: support IIO backends on the output direction - 1 - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,6/8] iio: backend: add new backend ops iio: dac: support IIO backends on the output direction - - - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,7/8] iio: dac: add support for the AD97339A RF DAC iio: dac: support IIO backends on the output direction - - - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC,8/8] iio: dac: adi-axi-dac: add support for AXI DAC IP core iio: dac: support IIO backends on the output direction - - - --- 2024-02-16 Nuno Sa via B4 Relay New
[RFC] iio: accel: st_accel: silent spi_device_id warnings [RFC] iio: accel: st_accel: silent spi_device_id warnings - - - --- 2023-11-01 Sean Nyekjaer New
[RFC] iio: pressure: dlhl60d: Check mask_width for IRQs [RFC] iio: pressure: dlhl60d: Check mask_width for IRQs - - - --- 2024-02-22 Kees Cook New
[v13,1/3] dt-bindings: adc: add AD7173 [v13,1/3] dt-bindings: adc: add AD7173 - 1 - --- 2024-02-20 Ceclan, Dumitru New
[v13,2/3] iio: adc: ad_sigma_delta: Add optional irq selection [v13,1/3] dt-bindings: adc: add AD7173 - - - --- 2024-02-20 Ceclan, Dumitru New
[v13,3/3] iio: adc: ad7173: add AD7173 driver [v13,1/3] dt-bindings: adc: add AD7173 - 3 - --- 2024-02-20 Ceclan, Dumitru New
[v14,1/3] dt-bindings: adc: add AD7173 [v14,1/3] dt-bindings: adc: add AD7173 - - - --- 2024-02-22 Ceclan, Dumitru New
[v14,2/3] iio: adc: ad_sigma_delta: Add optional irq selection [v14,1/3] dt-bindings: adc: add AD7173 - - - --- 2024-02-22 Ceclan, Dumitru New
[v14,3/3] iio: adc: ad7173: add AD7173 driver [v14,1/3] dt-bindings: adc: add AD7173 - 3 - --- 2024-02-22 Ceclan, Dumitru New
[v2,1/2] dt-bindings: iio: adc: add ad7944 ADCs iio: adc: ad7944: new driver - 1 - --- 2024-02-16 David Lechner New
[v2,1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding [v2,1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding - 1 - --- 2024-02-19 Marco Felsch New
[v2,1/5] spi: add spi_optimize_message() APIs spi: add support for pre-cooking messages 1 - - --- 2024-02-19 David Lechner New
[v2,2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986 iio: adc: ad7944: new driver - - - --- 2024-02-16 David Lechner New
[v2,2/2] iio: temperature: tmp117: add support for vcc-supply [v2,1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding - - - --- 2024-02-19 Marco Felsch New
[v2,2/5] spi: move splitting transfers to spi_optimize_message() spi: add support for pre-cooking messages 1 1 - --- 2024-02-19 David Lechner New
[v2,3/5] spi: stm32: move splitting transfers to optimize_message spi: add support for pre-cooking messages - - - --- 2024-02-19 David Lechner New
[v2,4/5] spi: axi-spi-engine: move message compile to optimize_message spi: add support for pre-cooking messages - 1 - --- 2024-02-19 David Lechner New
[v2,5/5] iio: adc: ad7380: use spi_optimize_message() spi: add support for pre-cooking messages - 1 - --- 2024-02-19 David Lechner New
[v2] iio: adc: mcp320x: Simplify device removal logic [v2] iio: adc: mcp320x: Simplify device removal logic - - - --- 2024-02-19 Arturas Moskvinas New
[v2] iio: imu: inv_mpu6050: fix FIFO parsing when empty [v2] iio: imu: inv_mpu6050: fix FIFO parsing when empty - - - --- 2024-02-19 inv.git-commit@tdk.com New
[v2] iio: imu: inv_mpu6050: fix frequency setting when chip is off [v2] iio: imu: inv_mpu6050: fix frequency setting when chip is off - - - --- 2024-02-19 inv.git-commit@tdk.com New
[v2] kbuild: tools: drop overridden CFLAGS from MAKEOVERRIDES [v2] kbuild: tools: drop overridden CFLAGS from MAKEOVERRIDES - - - --- 2024-01-31 Max Filippov New
[v3,1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield Add support for AF8133J magnetometer 1 - - --- 2024-02-16 Ondřej Jirman New
[v3,2/4] dt-bindings: iio: magnetometer: Add Voltafield AF8133J Add support for AF8133J magnetometer - 1 - --- 2024-02-16 Ondřej Jirman New
[v3,3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer Add support for AF8133J magnetometer - 1 1 --- 2024-02-16 Ondřej Jirman New
[v3,4/4] MAINTAINERS: Add an entry for AF8133J driver Add support for AF8133J magnetometer - - - --- 2024-02-16 Ondřej Jirman New
[v4,01/15] device property: Move fwnode_handle_put() into property.h device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. 1 1 - --- 2024-02-17 Jonathan Cameron New
[v4,02/15] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup. device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. 1 2 - --- 2024-02-17 Jonathan Cameron New
[v4,03/15] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,04/15] device property: Introduce device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. 1 1 - --- 2024-02-17 Jonathan Cameron New
[v4,05/15] iio: adc: max11410: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - 1 - --- 2024-02-17 Jonathan Cameron New
[v4,06/15] iio: adc: mcp3564: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,07/15] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - 1 - --- 2024-02-17 Jonathan Cameron New
[v4,08/15] iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,09/15] iio: adc: stm32: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield Add support for AF8133J magnetometer 1 - - --- 2024-02-22 Ondřej Jirman New
[v4,10/15] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,11/15] iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,12/15] iio: addac: ad74413r: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - 1 - --- 2024-02-17 Jonathan Cameron New
[v4,13/15] iio: dac: ad3552r: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,14/15] iio: dac: ad5770r: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - - - --- 2024-02-17 Jonathan Cameron New
[v4,15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped() device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. - 2 1 --- 2024-02-17 Jonathan Cameron New
[v4,2/4] dt-bindings: iio: magnetometer: Add Voltafield AF8133J Add support for AF8133J magnetometer - 1 - --- 2024-02-22 Ondřej Jirman New
[v4,3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer Add support for AF8133J magnetometer - 1 1 --- 2024-02-22 Ondřej Jirman New
« 1 2 »