Show patches with: Archived = No       |   12111 patches
« 1 2 3 4 … 121 122 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921 [v8] iio: adc: pac1921: Add ACPI support to Microchip pac1921 - - - --- 2024-11-08 victor.duicu@microchip.com New
[3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
[2/3] iio: temperature: Add support for P3T1085 iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
[1/3] dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor iio: temperature: Add support for P3T1085 - - - --- 2024-11-07 Frank Li New
iio: imu: inv_icm42600: fix spi burst write not supported iio: imu: inv_icm42600: fix spi burst write not supported - - - --- 2024-11-07 Jean-Baptiste Maneyrol via B4 Relay New
iio: light: veml6030: add support for triggered buffer iio: light: veml6030: add support for triggered buffer - - - --- 2024-11-07 Javier Carrasco New
[v3,2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4 [v3,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-07 Frank Li New
[v3,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code [v3,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-07 Frank Li New
iio: Move __private marking before struct element priv in struct iio_dev iio: Move __private marking before struct element priv in struct iio_dev - - - --- 2024-11-07 Jonathan Cameron New
[PULL] IIO: 3rd set of fixes for the 6.12 cycle. [PULL] IIO: 3rd set of fixes for the 6.12 cycle. - - - --- 2024-11-07 Jonathan Cameron New
[4/4] staging: most: Remove TODO contact information staging: Remove contact information from TODO files - - - --- 2024-11-07 Dominik Karol Piątkowski Handled Elsewhere
[3/4] staging: rtl8723bs: Remove TODO contact information staging: Remove contact information from TODO files - - - --- 2024-11-07 Dominik Karol Piątkowski Handled Elsewhere
[2/4] staging: sm750fb: Remove TODO contact information staging: Remove contact information from TODO files - - - --- 2024-11-07 Dominik Karol Piątkowski Handled Elsewhere
[1/4] staging: iio: Remove TODO file staging: Remove contact information from TODO files 1 - - --- 2024-11-07 Dominik Karol Piątkowski Handled Elsewhere
[v2,3/3] dt-bindings: iio: adis16480: add devices to adis16480 iio: imu: add devices to adis16480 driver - - - --- 2024-11-07 Darius Berghe New
[v2,2/3] iio: imu: adis16480: add devices to adis16480 - docs iio: imu: add devices to adis16480 driver - - - --- 2024-11-07 Darius Berghe New
[v2,1/3] iio: imu: adis16480: add devices to adis16480 driver iio: imu: add devices to adis16480 driver - - - --- 2024-11-07 Darius Berghe New
[v9,9/9] arm64: dts: rockchip: set hdd led labels on qnap-ts433 Drivers to support the MCU on QNAP NAS devices - - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,8/9] arm64: dts: rockchip: hook up the MCU on the QNAP TS433 Drivers to support the MCU on QNAP NAS devices - - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices Drivers to support the MCU on QNAP NAS devices 1 - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,6/9] Input: add driver for the input part of qnap-mcu devices Drivers to support the MCU on QNAP NAS devices 1 - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,5/9] leds: add driver for LEDs from qnap-mcu devices Drivers to support the MCU on QNAP NAS devices - - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,4/9] mfd: add base driver for qnap-mcu devices Drivers to support the MCU on QNAP NAS devices - - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices Drivers to support the MCU on QNAP NAS devices - 1 - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,2/9] mfd: core: make platform_data pointer const in struct mfd_cell Drivers to support the MCU on QNAP NAS devices - - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[v9,1/9] HID: hid-sensor-hub: don't use stale platform-data on remove Drivers to support the MCU on QNAP NAS devices 3 - - --- 2024-11-07 Heiko Stübner Handled Elsewhere
[GIT,PULL] Counter fixes for 6.12 [GIT,PULL] Counter fixes for 6.12 - - - --- 2024-11-07 William Breathitt Gray Handled Elsewhere
[GIT,PULL] Counter updates for 6.13 [GIT,PULL] Counter updates for 6.13 - - - --- 2024-11-07 William Breathitt Gray Handled Elsewhere
[v2,2/2] staging: iio: ad9832: Correct phase range check Fix phase range check in AD9832 and AD9834 drivers - - - --- 2024-11-07 Zicheng Qu New
[v2,1/2] staging: iio: ad9834: Correct phase range check Fix phase range check in AD9832 and AD9834 drivers - 1 - --- 2024-11-07 Zicheng Qu New
[v5,2/2] iio: light: Add support for TI OPT4060 color sensor Support for Texas Instruments OPT4060 RGBW Color sensor. - - - --- 2024-11-06 Per-Daniel Olsson New
[v5,1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor Support for Texas Instruments OPT4060 RGBW Color sensor. - 1 - --- 2024-11-06 Per-Daniel Olsson New
dt-bindings: iio: dac: ad5791: ldac gpio is active low dt-bindings: iio: dac: ad5791: ldac gpio is active low 1 - - --- 2024-11-06 Axel Haslam New
[v1,2/2] iio: adc: add Nuvoton NCT720x ADC driver iio: adc: add Nuvoton NCT720x ADC driver - - - --- 2024-11-06 Yu-Hsian Yang New
[v1,1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs iio: adc: add Nuvoton NCT720x ADC driver - - - --- 2024-11-06 Yu-Hsian Yang New
iio: trigger: stm32-timer-trigger: Add check for clk_enable() iio: trigger: stm32-timer-trigger: Add check for clk_enable() - - - --- 2024-11-05 Jiasheng Jiang New
[v2,2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4 [v2,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-05 Frank Li New
[v2,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code [v2,1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-05 Frank Li New
[v2,2/2] lib: util_macros_kunit: add kunit test for util_macros.h [v2,1/2] util_macros.h: fix/rework find_closest() macros - - - --- 2024-11-05 Alexandru Ardelean New
[v2,1/2] util_macros.h: fix/rework find_closest() macros [v2,1/2] util_macros.h: fix/rework find_closest() macros - - - --- 2024-11-05 Alexandru Ardelean New
[2/2] staging: iio: ad9832: Correct phase range check Correct Phase Range Check for AD9832 and AD9834 Drivers - - - --- 2024-11-05 Zicheng Qu New
[1/2] staging: iio: ad9834: Correct phase range check Correct Phase Range Check for AD9832 and AD9834 Drivers - - - --- 2024-11-05 Zicheng Qu New
[2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4 [1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-04 Frank Li New
[1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code [1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code - 1 - --- 2024-11-04 Frank Li New
iio: adc: ad7173: remove unused field iio: adc: ad7173: remove unused field - 1 - --- 2024-11-04 David Lechner New
[v2] counter: ti-ecap-capture: Add check for clk_enable() [v2] counter: ti-ecap-capture: Add check for clk_enable() - 1 - --- 2024-11-04 Jiasheng Jiang New
[v2] counter: stm32-timer-cnt: Add check for clk_enable() [v2] counter: stm32-timer-cnt: Add check for clk_enable() - - - --- 2024-11-04 Jiasheng Jiang New
iio: dac: mcp4725: Use of_property_present() for non-boolean properties iio: dac: mcp4725: Use of_property_present() for non-boolean properties - - - --- 2024-11-04 Rob Herring (Arm) New
iio: adc: ad7124: Disable all channels at probe time iio: adc: ad7124: Disable all channels at probe time - 1 - --- 2024-11-04 Uwe Kleine-König New
[v3,2/2] dt-bindings: mfd: sprd,sc2731: reference sprd,sc2731-efuse bindings [v3,1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML - - - --- 2024-11-04 Stanislav Jakubek New
[v3,1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML [v3,1/2] dt-bindings: mfd: sprd,sc2731: convert to YAML - 1 - --- 2024-11-04 Stanislav Jakubek New
counter: ti-ecap-capture: Add check for clk_enable() counter: ti-ecap-capture: Add check for clk_enable() - 1 - --- 2024-11-03 Jiasheng Jiang New
counter: stm32-timer-cnt: Add check for clk_enable() counter: stm32-timer-cnt: Add check for clk_enable() - - - --- 2024-11-03 Jiasheng Jiang New
iio: invensense: fix integer overflow while multiplication iio: invensense: fix integer overflow while multiplication - - - --- 2024-11-03 Karan Sanghavi New
[v4,6/6] arm64: dts: allwinner: pinephone: Add power supplies to stk3311 iio: light: stk3310: support powering off during suspend - - - --- 2024-11-02 Aren New
[v4,5/6] iio: light: stk3310: log error if reading the chip id fails iio: light: stk3310: support powering off during suspend - - - --- 2024-11-02 Aren New
[v4,4/6] iio: light: stk3310: use dev_err_probe where possible iio: light: stk3310: support powering off during suspend - - - --- 2024-11-02 Aren New
[v4,3/6] iio: light: stk3310: Implement vdd and leda supplies iio: light: stk3310: support powering off during suspend - - - --- 2024-11-02 Aren New
[v4,2/6] iio: light: stk3310: handle all remove logic with devm callbacks iio: light: stk3310: support powering off during suspend - - - --- 2024-11-02 Aren New
[v4,1/6] dt-bindings: iio: light: stk33xx: add vdd and leda regulators iio: light: stk3310: support powering off during suspend - 1 - --- 2024-11-02 Aren New
[v3,7/7] iio: chemical: bme680: add power management : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Changes Requested
[v3,6/7] iio: chemical: bme680: add regulators : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Changes Requested
[v3,5/7] dt-bindings: iio: bosch,bme680: Add supply properties : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Changes Requested
[v3,4/7] iio: chemical: bme680: Add support for preheat current : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Accepted
[v3,3/7] iio: chemical: bme680: Add triggered buffer support : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Accepted
[v3,2/7] iio: chemical: bme680: Add SCALE and RAW channels : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Accepted
[v3,1/7] iio: chemical: bme680: refactorize set_mode() mode : iio: chemical: bme680: 2nd round of cleanup - - - --- 2024-11-02 Vasileios Amoiridis Accepted
iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() - - - --- 2024-11-02 Zicheng Qu Accepted
[3/3] iio: events: make IIO_EVENT_CODE macro private iio: finish cleanup of IIO_EVENT_CODE macros - - - --- 2024-11-01 David Lechner Accepted
[2/3] iio: accel: mma9553: use specialized event code macros iio: finish cleanup of IIO_EVENT_CODE macros - - - --- 2024-11-01 David Lechner Accepted
[1/3] iio: dummy: use specialized event code macros iio: finish cleanup of IIO_EVENT_CODE macros - - - --- 2024-11-01 David Lechner Accepted
[v3,4/4] iio: accel: kxcjk-1013: Deduplicate ODR startup time array iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Accepted
[v3,3/4] iio: accel: kxcjk-1013: Assign NULL to ddata in kxcjk1013_probe() iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Accepted
[v3,2/4] iio: light: ltr501: Assign NULL to ddata in ltr501_probe() iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Accepted
[v3,1/4] iio: light: isl29018: Assign NULL to ddata in isl29018_probe() iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Accepted
[3/3] dt-bindings: iio: adis16480: add devices to adis16480 [1/3] iio: imu: adis16480: add devices to adis16480 driver - - - --- 2024-11-01 Darius Berghe Changes Requested
[2/3] iio: imu: adis16480: add devices to adis16480 - docs [1/3] iio: imu: adis16480: add devices to adis16480 driver - - - --- 2024-11-01 Darius Berghe Changes Requested
[1/3] iio: imu: adis16480: add devices to adis16480 driver [1/3] iio: imu: adis16480: add devices to adis16480 driver - - - --- 2024-11-01 Darius Berghe Changes Requested
[v5,6/6] iio: adc: ad4851: add ad485x driver *** Add support for AD485x DAS Family *** - - - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v5,5/6] dt-bindings: iio: adc: add ad4851 *** Add support for AD485x DAS Family *** - 1 - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v5,4/6] iio: adc: adi-axi-adc: set data format *** Add support for AD485x DAS Family *** - - - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v5,3/6] iio: adc: adi-axi-adc: add interface type *** Add support for AD485x DAS Family *** - 1 - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v5,2/6] iio: backend: add support for data size set *** Add support for AD485x DAS Family *** - - - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v5,1/6] iio: backend: add API for interface get *** Add support for AD485x DAS Family *** - 1 - --- 2024-11-01 Miclaus, Antoniu Changes Requested
[v1,1/1] iio: Mark iio_dev::priv member with __private [v1,1/1] iio: Mark iio_dev::priv member with __private - - - --- 2024-11-01 Andy Shevchenko Accepted
iio: accel: adxl380: fix raw sample read iio: accel: adxl380: fix raw sample read - - - --- 2024-11-01 Miclaus, Antoniu Accepted
[v2,4/4] iio: accel: kxcjk-1013: Deduplicate ODR startup time array iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Superseded
[v2,3/4] iio: accel: kxcjk-1013: Assing ddata to NULL instead of NULL check iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Superseded
[v2,2/4] iio: light: isl29018: Assing ddata to NULL iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Superseded
[v2,1/4] iio: light: ltr501: Assing ddata to NULL iio: initialise ddata for iio_get_acpi_device_name_and_data() - - - --- 2024-11-01 Andy Shevchenko Superseded
[v3,5/5] iio: hid-sensor-prox: Add support for more channels iio: hid-sensors-prox: Add support for more channels - - - --- 2024-11-01 Ricardo Ribalda Accepted
[v3,4/5] iio: hid-sensors-prox: Make proximity channel indexed iio: hid-sensors-prox: Add support for more channels - - - --- 2024-11-01 Ricardo Ribalda Accepted
[v3,3/5] iio: Add channel type for attention iio: hid-sensors-prox: Add support for more channels - - - --- 2024-11-01 Ricardo Ribalda Accepted
[v3,2/5] iio: hid-sensors-prox: Factor-in hid_sensor_push_data iio: hid-sensors-prox: Add support for more channels - - - --- 2024-11-01 Ricardo Ribalda Accepted
[v3,1/5] iio: hid-sensors: Add proximity and attention IDs iio: hid-sensors-prox: Add support for more channels - - - --- 2024-11-01 Ricardo Ribalda Accepted
[v2,15/15] iio: light: apds9960: remove useless return iio: fix write_event_config signature - - - --- 2024-10-31 Julien Stephan Accepted
[v2,14/15] iio: light: apds9960: convert als_int and pxs_int to bool iio: fix write_event_config signature - - - --- 2024-10-31 Julien Stephan Accepted
[v2,13/15] iio: light: apds9306: simplifies if branch in apds9306_write_event_config iio: fix write_event_config signature - - - --- 2024-10-31 Julien Stephan Accepted
[v2,12/15] iio: light: apds9300: use bool for event state iio: fix write_event_config signature - - - --- 2024-10-31 Julien Stephan Accepted
[v2,11/15] iio: imu: st_lsm6dsx: use bool for event state iio: fix write_event_config signature - - - --- 2024-10-31 Julien Stephan Accepted
« 1 2 3 4 … 121 122 »