Show patches with: State = Action Required       |    Archived = No       |   219 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[PROBLEM] : Error during probing process in inv_icm42600_i2c driver [PROBLEM] : Error during probing process in inv_icm42600_i2c driver - - - --- 2021-12-08 Nikos Latmos New
[RFC,12/32] iio: adc: Kconfig: add HAS_IOPORT dependencies Untitled series #601532 - - - --- 2021-12-27 Niklas Schnelle New
[v3,3/3] iio: addac: ad74413r: for_each_set_bit_from -> for_each_set_bit [v3,1/3] iio: addac: ad74413r: use ngpio size when iterating over mask - 1 - --- 2022-01-11 Cosmin Tanislav New
iio: adc: ad_sigma_delta: IRQ sharing mechanism. iio: adc: ad_sigma_delta: IRQ sharing mechanism. - - - --- 2022-01-11 Daniel Beer New
[v2,1/2] dt-bindings: iio: addac: one-bit-adc-dac yaml documentation [v2,1/2] dt-bindings: iio: addac: one-bit-adc-dac yaml documentation - - - --- 2022-01-11 Cristian Pop New
[v2,2/2] one-bit-adc-dac: Add initial version of one bit ADC-DAC [v2,1/2] dt-bindings: iio: addac: one-bit-adc-dac yaml documentation - - - --- 2022-01-11 Cristian Pop New
[1/2] iio: imu: st_lsm6dsx: Limit requested watermark value to hwfifo size [1/2] iio: imu: st_lsm6dsx: Limit requested watermark value to hwfifo size 1 - - --- 2022-01-17 Paul Cercueil New
[2/2] iio: at91-sama5d2: Limit requested watermark value to hwfifo size [1/2] iio: imu: st_lsm6dsx: Limit requested watermark value to hwfifo size - - - --- 2022-01-17 Paul Cercueil New
[next] iio: hw_consumer: Use struct_size() helper in kzalloc() [next] iio: hw_consumer: Use struct_size() helper in kzalloc() - 1 - --- 2022-01-20 Gustavo A. R. Silva New
[v2,01/12] iio: buffer-dma: Get rid of outgoing queue iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,02/12] iio: buffer-dma: Enable buffer write support iio: buffer-dma: write() and new DMABUF based API - 1 - --- 2022-02-07 Paul Cercueil New
[v2,03/12] iio: buffer-dmaengine: Support specifying buffer direction iio: buffer-dma: write() and new DMABUF based API - 1 - --- 2022-02-07 Paul Cercueil New
[v2,04/12] iio: buffer-dmaengine: Enable write support iio: buffer-dma: write() and new DMABUF based API - 1 - --- 2022-02-07 Paul Cercueil New
[v2,05/12] iio: core: Add new DMABUF interface infrastructure iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,06/12] iio: buffer-dma: split iio_dma_buffer_fileio_free() function iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,07/12] iio: buffer-dma: Use DMABUFs instead of custom solution iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,08/12] iio: buffer-dma: Implement new DMABUF based userspace API iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,09/12] iio: buffer-dmaengine: Support new DMABUF based userspace API iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[v2,10/12] iio: core: Add support for cyclic buffers iio: buffer-dma: write() and new DMABUF based API - 1 - --- 2022-02-07 Paul Cercueil New
[v2,11/12] iio: buffer-dmaengine: Add support for cyclic buffers iio: buffer-dma: write() and new DMABUF based API - 1 - --- 2022-02-07 Paul Cercueil New
[v2,12/12] Documentation: iio: Document high-speed DMABUF based API iio: buffer-dma: write() and new DMABUF based API - - - --- 2022-02-07 Paul Cercueil New
[04/49] iio: fix opencoded for_each_set_bit() Untitled series #613258 - 1 - --- 2022-02-10 Yury Norov New
[RFC] iio: core: provide a default value `label` property [RFC] iio: core: provide a default value `label` property - - - --- 2022-02-16 Nandor Han New
iio: core: drop iio_get_time_res() iio: core: drop iio_get_time_res() - - - --- 2022-02-20 Jonathan Cameron New
[1/5] iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace 3rd set of IIO export namspaces. - - - --- 2022-02-20 Jonathan Cameron New
[2/5] iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace 3rd set of IIO export namspaces. - - - --- 2022-02-20 Jonathan Cameron New
[3/5] iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace 3rd set of IIO export namspaces. - - - --- 2022-02-20 Jonathan Cameron New
[4/5] iio: adc: adi-axi: Move exported symbols into IIO_ADI_AXI namespace. 3rd set of IIO export namspaces. - 1 - --- 2022-02-20 Jonathan Cameron New
[5/5] iio: adc: qcom-vadc: Move symbol exports to IIO_QCOM_VADC namespace 3rd set of IIO export namspaces. - - - --- 2022-02-20 Jonathan Cameron New
[1/2] iio: gyro: mpu3050: Drop unused symbol exports. iio: gyro: mpu3050: Cleanup exports and PM - 1 - --- 2022-02-20 Jonathan Cameron New
[2/2] iio: gyro: mpu3050: Use pm_ptr() and DEFINE_RUNTIME_DEV_PM_OPS() iio: gyro: mpu3050: Cleanup exports and PM - 1 - --- 2022-02-20 Jonathan Cameron New
[1/8] iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume() IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[2/8] PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[3/8] iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[4/8] iio:accel:kxsd9: Switch from CONFIG_PM guards to pm_ptr() etc IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[5/8] iio: humidity: hts221: Use EXPORT_SIMPLE_DEV_PM_OPS() to allow compiler to remove dead code. IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[6/8] iio: humidity: hts221: Move symbol exports into IIO_HTS221 namespace IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[7/8] iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS() IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
[8/8] iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace IIO: Where dev_pm_ops rework and namespaces meet. - - - --- 2022-02-20 Jonathan Cameron New
iio: accel: mma8452: remove the reset operation during driver probe iio: accel: mma8452: remove the reset operation during driver probe - - - --- 2022-02-22 Bough Chen New
iio: adc: ad7280a: Fix wrong variable used when setting thresholds. iio: adc: ad7280a: Fix wrong variable used when setting thresholds. - 1 - --- 2022-02-26 Jonathan Cameron New
iio: freq: admv1014: Fix warning about dubious x & !y and improve readability iio: freq: admv1014: Fix warning about dubious x & !y and improve readability - - - --- 2022-03-19 Jonathan Cameron New
[v4,2/8] iio: sx9324: Fix register field spelling Add settings for precharge and internal resistor - 1 - --- 2022-04-06 Gwendal Grignou New
[v4,3/8] dt-bindings: iio: sx9324: Add precharge resistor setting Add settings for precharge and internal resistor 1 1 - --- 2022-04-06 Gwendal Grignou New
[v4,4/8] iio: sx9324: Add precharge internal resistance setting Add settings for precharge and internal resistor - 1 - --- 2022-04-06 Gwendal Grignou New
[v4,5/8] dt-bindings: iio: sx9324: Add internal compensation resistor setting Add settings for precharge and internal resistor 1 1 - --- 2022-04-06 Gwendal Grignou New
[v4,6/8] iio: sx9324: Add Setting for internal compensation resistor Add settings for precharge and internal resistor - 1 - --- 2022-04-06 Gwendal Grignou New
[v4,7/8] dt-bindings: iio: sx9360: Add precharge resistor setting Add settings for precharge and internal resistor - 1 - --- 2022-04-06 Gwendal Grignou New
[v4,8/8] iio: sx9360: Add pre-charge resistor setting Add settings for precharge and internal resistor - 1 - --- 2022-04-06 Gwendal Grignou New
[01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[03/17] staging: iio: cdc: ad7746: Use explicit be24 handling. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[06/17] staging: iio: cdc: ad7746: Factor out ad7746_read_channel() staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[09/17] staging: iio: cdc: ad7746: Drop usused i2c_set_clientdata() staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[10/17] staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[11/17] iio: core: Introduce _inputoffset for differential channels staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[12/17] staging: iio: cdc: ad7746: Switch from _offset to _inputoffset for differential channels. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[13/17] staging: iio: cdc: ad7746: Use read_avail() rather than opencoding. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[14/17] staging: iio: ad7746: White space cleanup staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[15/17] iio: cdc: ad7746: Add device specific ABI documentation. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[16/17] iio: cdc: ad7746: Move driver out of staging. staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[17/17] RFC: iio: cdc: ad7746: Add roadtest staging/iio: Clean up AD7746 CDC driver and move from staging. - - - --- 2022-04-18 Jonathan Cameron New
[v5,01/10] iio: sx9324: Fix default precharge internal resistance register iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v5,02/10] iio: sx9324: Fix register field spelling iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v5,03/10] dt-bindings: iio: sx9324: Add precharge resistor setting iio: sx9324/9360: Add settings for precharge, gain and internal resistor 1 1 - --- 2022-04-29 Gwendal Grignou New
[v5,04/10] iio: sx9324: Add precharge internal resistance setting iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v5,05/10] dt-bindings: iio: sx9324: Add internal compensation resistor setting iio: sx9324/9360: Add settings for precharge, gain and internal resistor 1 1 - --- 2022-04-29 Gwendal Grignou New
[v5,06/10] iio: sx9324: Add Setting for internal compensation resistor iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v5,07/10] dt-bindings: iio: sx9324: Add input analog gain iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 2 - --- 2022-04-29 Gwendal Grignou New
[v5,08/10] iio: sx9324: Add Setting for internal analog gain iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v5,09/10] dt-bindings: iio: sx9360: Add precharge resistor setting iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 2 - --- 2022-04-29 Gwendal Grignou New
[v5,10/10] iio: sx9360: Add pre-charge resistor setting iio: sx9324/9360: Add settings for precharge, gain and internal resistor - 1 - --- 2022-04-29 Gwendal Grignou New
[v14,01/10] spmi: add a helper to look up an SPMI device from a device node iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients iio: adc: introduce Qualcomm SPMI Round Robin ADC - 1 1 --- 2022-04-29 Caleb Connolly New
[v14,03/10] mfd: qcom-spmi-pmic: read fab id on supported PMICs iio: adc: introduce Qualcomm SPMI Round Robin ADC - 1 1 --- 2022-04-29 Caleb Connolly New
[v14,04/10] dt-bindings: iio: adc: document qcom-spmi-rradc iio: adc: introduce Qualcomm SPMI Round Robin ADC - 1 - --- 2022-04-29 Caleb Connolly New
[v14,05/10] iio: adc: qcom-spmi-rradc: introduce round robin adc iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,06/10] arm64: dts: qcom: pmi8998: add rradc node iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,07/10] arm64: dts: qcom: sdm845-oneplus: enable rradc iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,08/10] arm64: dts: qcom: sdm845-db845c: enable rradc iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,09/10] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[v14,10/10] arm64: dts: qcom: msm8998-oneplus-common: enable RRADC iio: adc: introduce Qualcomm SPMI Round Robin ADC - - - --- 2022-04-29 Caleb Connolly New
[1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode iio: sx9324: Support CS idle mode - - - --- 2022-05-03 Stephen Boyd New
[2/2] iio: sx9324: Add setting for CS idle mode iio: sx9324: Support CS idle mode - - - --- 2022-05-03 Stephen Boyd New
[v2,1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode iio: sx9324: Support CS idle mode - 2 - --- 2022-05-03 Stephen Boyd New
[v2,2/2] iio: sx9324: Add setting for CS idle mode iio: sx9324: Support CS idle mode - 1 - --- 2022-05-03 Stephen Boyd New
[PULL] 1st set of IIO new device support, features and cleanup for 5.19 [PULL] 1st set of IIO new device support, features and cleanup for 5.19 - - - --- 2022-05-04 Jonathan Cameron New
[v2,01/92] iio: core: Fix IIO_ALIGN and rename as it was not sufficiently large IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,02/92] iio: accel: adxl313: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,03/92] iio: accel: adxl355: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,04/92] iio: accel: adxl367: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,05/92] iio: accel: bma220: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,06/92] iio: accel: bmi088: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,07/92] iio: accel: sca3000: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
[v2,08/92] iio: accel: sca3300: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 1 - --- 2022-05-08 Jonathan Cameron New
[v2,09/92] iio: adc: ad7266: Fix alignment for DMA safety IIO: Fix alignment of buffers for DMA 1 - - --- 2022-05-08 Jonathan Cameron New
« 1 2 3 »