Show patches with: State = Action Required       |    Archived = No       |   484 patches
« 1 2 3 44 5 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2] iio: imu: inv_mpu6050: add debugfs register r/w interface [v2] iio: imu: inv_mpu6050: add debugfs register r/w interface 1 1 - --- 2020-03-27 Rohit Sarkar jic23 Under Review
[v7,1/2] Added AMS tsl2591 driver implementation [v7,1/2] Added AMS tsl2591 driver implementation - - - --- 2021-04-02 Joe Sandom New
[v7,2/2] Added AMS tsl2591 device tree binding [v7,1/2] Added AMS tsl2591 driver implementation - 1 - --- 2021-04-02 Joe Sandom New
iio: buffer: use sysfs_attr_init() on allocated attrs iio: buffer: use sysfs_attr_init() on allocated attrs - - 1 --- 2021-04-02 Alexandru Ardelean New
[v2,1/2] iio: trigger: Replace explicit casting and wrong specifier with proper one [v2,1/2] iio: trigger: Replace explicit casting and wrong specifier with proper one - - - --- 2021-04-02 Andy Shevchenko New
[v2,2/2] iio: trigger: Fix strange (ladder-type) indentation [v2,1/2] iio: trigger: Replace explicit casting and wrong specifier with proper one - - - --- 2021-04-02 Andy Shevchenko New
[1/7] iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce boilerplate iio: Use IRQF_NO_AUTOEN - 1 - --- 2021-04-02 Jonathan Cameron New
[2/7] iio:adc:exynos-adc: Use new IRQF_NO_AUTOEN flag rather than separate irq_disable() iio: Use IRQF_NO_AUTOEN - 2 - --- 2021-04-02 Jonathan Cameron New
[3/7] iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request then disable iio: Use IRQF_NO_AUTOEN - 1 - --- 2021-04-02 Jonathan Cameron New
[4/7] iio:adc:sun4i-gpadc: Use new IRQF_NO_AUTOEN flag instead of request then disable iio: Use IRQF_NO_AUTOEN - 1 - --- 2021-04-02 Jonathan Cameron New
[5/7] iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq request then disable iio: Use IRQF_NO_AUTOEN - 1 - --- 2021-04-02 Jonathan Cameron New
[6/7] iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable iio: Use IRQF_NO_AUTOEN - 2 - --- 2021-04-02 Jonathan Cameron New
[7/7] iio:adc:ad_sigma_delta: Use IRQF_NO_AUTOEN rather than request and disable iio: Use IRQF_NO_AUTOEN - - - --- 2021-04-02 Jonathan Cameron New
staging: iio: cdc: remove repeated word staging: iio: cdc: remove repeated word - - - --- 2021-04-04 David Villasana Jiménez New
iio: inv_mpu6050: Fully validate gyro and accel scale writes iio: inv_mpu6050: Fully validate gyro and accel scale writes 1 - - --- 2021-04-05 Lars-Peter Clausen New
[PULL] 2nd set of IIO fixes for the 5.12 cycle [PULL] 2nd set of IIO fixes for the 5.12 cycle - - - --- 2021-04-05 Jonathan Cameron New
[v2,1/2] iio:adc:ad7476: Handle the different regulators used by various parts. iio:adc:ad7476: Regulator support and binding doc - - - --- 2021-04-05 Jonathan Cameron New
[v2,2/2] dt-bindings:iio:adc:adi,ad7474: Add missing binding document iio:adc:ad7476: Regulator support and binding doc - 1 - --- 2021-04-05 Jonathan Cameron New
[v2,resend,1/2] iio: documentation: Document proximity sensor label use iio: documentation: Document proximity/accel sensor label use - - - --- 2021-04-05 Hans de Goede New
[v2,resend,2/2] iio: documentation: Document accelerometer label use iio: documentation: Document proximity/accel sensor label use - - - --- 2021-04-05 Hans de Goede New
iio:cdc:ad7150: Fix use of uninitialized ret iio:cdc:ad7150: Fix use of uninitialized ret - - - --- 2021-04-06 Jonathan Cameron New
iio: adis16480: support burst read function iio: adis16480: support burst read function - - - --- 2021-04-06 Nuno Sá New
[v3,1/2] dt-bindings: iio: temperature: Add DT bindings for TMP117 iio: temperature: add support for tmp117 - - - --- 2021-04-06 Puranjay Mohan New
[v3,2/2] iio: temperature: add driver support for ti tmp117 iio: temperature: add support for tmp117 - - - --- 2021-04-06 Puranjay Mohan New
[PULL] 2nd set of IIO features and cleanup etc for 5.13 [PULL] 2nd set of IIO features and cleanup etc for 5.13 - - - --- 2021-04-06 Jonathan Cameron New
iio: light: gp2ap002: Fix rumtime PM imbalance on error iio: light: gp2ap002: Fix rumtime PM imbalance on error - 1 - --- 2021-04-07 Dinghao Liu New
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error iio: proximity: pulsedlight: Fix rumtime PM imbalance on error - 1 - --- 2021-04-07 Dinghao Liu New
[PULL,v2] 2nd set of IIO features and cleanup etc for 5.13 [PULL,v2] 2nd set of IIO features and cleanup etc for 5.13 - - - --- 2021-04-07 Jonathan Cameron New
[v2,07/19] dt-bindings: fix references for iio-bindings.txt Fix broken documentation file references 2 - - --- 2021-04-07 Mauro Carvalho Chehab New
[v4,1/2] dt-bindings: iio: temperature: Add DT bindings for TMP117 iio: temperature: add support for tmp117 - 1 - --- 2021-04-07 Puranjay Mohan New
[v4,2/2] iio: temperature: add driver support for ti tmp117 iio: temperature: add support for tmp117 - 2 - --- 2021-04-07 Puranjay Mohan New
[v2] iio: adis16480: support burst read function [v2] iio: adis16480: support burst read function - 1 - --- 2021-04-08 Nuno Sá New
[1/7] iio: adc: adi-axi-adc: simplify devm_adi_axi_adc_conv_register Simplify codes with devm_add_action_or_reset - 1 - --- 2021-04-08 Yicong Yang New
[2/7] iio: buffer-dmaengine: simplify __devm_iio_dmaengine_buffer_free Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
[3/7] iio: hw_consumer: simplify devm_iio_hw_consumer_alloc Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
[4/7] iio: triggered-buffer: simplify devm_iio_triggered_buffer_setup_ext Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
[5/7] iio: core: simplify some devm functions Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
[6/7] iio: trigger: simplify __devm_iio_trigger_register Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
[7/7] iio: inkern: simplify some devm functions Simplify codes with devm_add_action_or_reset - - - --- 2021-04-08 Yicong Yang New
HID: hid-sensor-custom: remove useless variable HID: hid-sensor-custom: remove useless variable 1 - - --- 2021-04-09 Jiapeng Chong New
[v3,2/8] dt-bindings: fix references for iio-bindings.txt Fix broken documentation file references 2 - - --- 2021-04-09 Mauro Carvalho Chehab New
[1/3] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746 staging: iio: cdc: ad7746: remove platform_data in favor of device tree bindings - - - --- 2021-04-09 Lucas Stankus New
[2/3] staging: iio: cdc: ad7746: use dt bindings to set the EXCx pins output staging: iio: cdc: ad7746: remove platform_data in favor of device tree bindings - - - --- 2021-04-09 Lucas Stankus New
[3/3] staging: iio: cdc: ad7746: use dt binding to set the excitation level staging: iio: cdc: ad7746: remove platform_data in favor of device tree bindings - - - --- 2021-04-09 Lucas Stankus New
iio: adc: exynos: drop unneeded variable assignment iio: adc: exynos: drop unneeded variable assignment - 1 - --- 2021-04-10 Krzysztof Kozlowski New
[v2] iio: proximity: pulsedlight: Fix rumtime PM imbalance on error [v2] iio: proximity: pulsedlight: Fix rumtime PM imbalance on error - - - --- 2021-04-12 Dinghao Liu New
[1/2] dt-bindings: iio: accel: Add SCA3300 documentation [1/2] dt-bindings: iio: accel: Add SCA3300 documentation - - - --- 2021-04-12 Tomas Melin New
[2/2] iio: accel: Add driver for Murata SCA3300 accelerometer [1/2] dt-bindings: iio: accel: Add SCA3300 documentation - - - --- 2021-04-12 Tomas Melin New
[drivers/iio,1/3] iio:chemical:sps30: Convert sysfs sprintf/snprintf family to sysfs_emit convert sysfs sprintf/snprintf/scnprintf to sysfs_emit - - - --- 2021-04-12 tiantao (H) New
[drivers/iio,2/3] iio: light: Convert sysfs sprintf/snprintf family to sysfs_emit convert sysfs sprintf/snprintf/scnprintf to sysfs_emit - - - --- 2021-04-12 tiantao (H) New
[drivers/iio,3/3] iio: trigger: stm32-timer: Convert sysfs sprintf/snprintf family to sysfs_emit convert sysfs sprintf/snprintf/scnprintf to sysfs_emit - - - --- 2021-04-12 tiantao (H) New
[v1,1/1] iio: adc: ad7768-1: Keep fwnode reference count balanced [v1,1/1] iio: adc: ad7768-1: Keep fwnode reference count balanced - - - --- 2021-04-12 Andy Shevchenko New
iio: st-sensors: Update ST Sensor bindings iio: st-sensors: Update ST Sensor bindings - 1 - --- 2021-04-12 Linus Walleij New
[v1,1/1] iio: adc: ad7298: Enable on Intel Galileo Gen 1 [v1,1/1] iio: adc: ad7298: Enable on Intel Galileo Gen 1 - - - --- 2021-04-12 Andy Shevchenko New
[v2,1/1] iio: adc: ad7298: Enable on Intel Galileo Gen 1 [v2,1/1] iio: adc: ad7298: Enable on Intel Galileo Gen 1 - - - --- 2021-04-12 Andy Shevchenko New
[v3] iio: adis16480: support burst read function [v3] iio: adis16480: support burst read function - - - --- 2021-04-13 Nuno Sá New
[1/7] iio: adis_buffer: do not return ints in irq handlers Adis IRQ fixes and minor improvements - 1 - --- 2021-04-13 Nuno Sá New
[2/7] iio: adis16400: do not return ints in irq handlers Adis IRQ fixes and minor improvements - 1 - --- 2021-04-13 Nuno Sá New
[3/7] iio: adis16475: do not return ints in irq handlers Adis IRQ fixes and minor improvements - - - --- 2021-04-13 Nuno Sá New
[4/7] iio: adis16475: re-set max spi transfer Adis IRQ fixes and minor improvements - - - --- 2021-04-13 Nuno Sá New
[5/7] iio: adis_buffer: check return value on page change Adis IRQ fixes and minor improvements - - - --- 2021-04-13 Nuno Sá New
[6/7] iio: adis_buffer: don't push data to buffers on failure Adis IRQ fixes and minor improvements - - - --- 2021-04-13 Nuno Sá New
[7/7] iio: adis_buffer: update device page after changing it Adis IRQ fixes and minor improvements - - - --- 2021-04-13 Nuno Sá New
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER 1 - - --- 2021-04-14 Alexandru Ardelean New
[21/57] staging: iio: frequency: ad9834: Provide missing description for 'devid' Rid W=1 warnings from Staging 1 - - --- 2021-04-14 Lee Jones New
[v1,1/7] iio: accel: st_accel: Move platform data from header to C file [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,2/7] iio: gyro: st_gyro: Move platform data from header to C file [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,3/7] iio: magnetometer: st_magn: Provide default platform data [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,4/7] iio: st_sensors: Call st_sensors_power_enable() from bus drivers [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,5/7] iio: st_sensors: Make accel, gyro, magn and pressure probe shared [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,6/7] iio: st_sensors: Add lsm9ds0 IMU support [v1,1/7] iio: accel: st_accel: Move platform data from header to C file - - - --- 2021-04-14 Andy Shevchenko New
[v1,7/7] dt-bindings: iio: st,st-sensors: Add LSM9DS0 compatible string [v1,1/7] iio: accel: st_accel: Move platform data from header to C file 1 - - --- 2021-04-14 Andy Shevchenko New
[RFC,1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers [RFC,1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers - - - --- 2021-04-15 Sean Nyekjaer New
[RFC,2/2] dt-bindings: iio: accel: fxls8962af: add bindings [RFC,1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers - - - --- 2021-04-15 Sean Nyekjaer New
[1/2] HID: hid-sensor-hub: Return error for hid_set_field() failure [1/2] HID: hid-sensor-hub: Return error for hid_set_field() failure 1 - - --- 2021-04-15 Srinivas Pandruvada New
[2/2] HID: hid-sensor-custom: Process failure of sensor_hub_set_feature() [1/2] HID: hid-sensor-hub: Return error for hid_set_field() failure - - - --- 2021-04-15 Srinivas Pandruvada New
[1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers [1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers - - - --- 2021-04-16 Sean Nyekjaer New
[2/2] dt-bindings: iio: accel: fxls8962af: add bindings [1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers - - - --- 2021-04-16 Sean Nyekjaer New
[v2,1/2] dt-bindings: iio: accel: Add SCA3300 documentation [v2,1/2] dt-bindings: iio: accel: Add SCA3300 documentation - - - --- 2021-04-16 Tomas Melin New
[v2,2/2] iio: accel: Add driver for Murata SCA3300 accelerometer [v2,1/2] dt-bindings: iio: accel: Add SCA3300 documentation - - - --- 2021-04-16 Tomas Melin New
[v8,1/2] Added AMS tsl2591 driver implementation [v8,1/2] Added AMS tsl2591 driver implementation - - - --- 2021-04-16 Joe Sandom New
[v8,2/2] Added AMS tsl2591 device tree binding [v8,1/2] Added AMS tsl2591 driver implementation - 2 - --- 2021-04-16 Joe Sandom New
[v2,1/2] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746 staging: iio: cdc: ad7746: add dt properties for capacitive channel setup - - - --- 2021-04-18 Lucas Stankus New
[v2,2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup. staging: iio: cdc: ad7746: add dt properties for capacitive channel setup - - - --- 2021-04-18 Lucas Stankus New
[v3,1/2] dt-bindings: iio: accel: Add SCA3300 documentation iio: accel: sca3300: Accelerometer support and binding docs - - - --- 2021-04-19 Tomas Melin New
[v3,2/2] iio: accel: Add driver for Murata SCA3300 accelerometer iio: accel: sca3300: Accelerometer support and binding docs - - - --- 2021-04-19 Tomas Melin New
[v4,1/2] dt-bindings: iio: accel: Add SCA3300 documentation iio: accel: sca3300: Accelerometer support and binding docs - 1 - --- 2021-04-20 Tomas Melin New
[v4,2/2] iio: accel: Add driver for Murata SCA3300 accelerometer iio: accel: sca3300: Accelerometer support and binding docs - - - --- 2021-04-20 Tomas Melin New
[v9,1/2] iio: light: Added AMS tsl2591 driver implementation [v9,1/2] iio: light: Added AMS tsl2591 driver implementation - 1 - --- 2021-04-21 Joe Sandom New
[v9,2/2] dt-bindings: iio: light: Added AMS tsl2591 device tree binding [v9,1/2] iio: light: Added AMS tsl2591 driver implementation - 2 - --- 2021-04-21 Joe Sandom New
[v1] iio: gyro: mpu3050: Fix reported temperature value [v1] iio: gyro: mpu3050: Fix reported temperature value - 1 2 --- 2021-04-21 Dmitry Osipenko New
[v2] iio: gyro: mpu3050: Fix reported temperature value [v2] iio: gyro: mpu3050: Fix reported temperature value - 2 2 --- 2021-04-22 Dmitry Osipenko New
[v2,1/9] iio: adis_buffer: do not return ints in irq handlers Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,2/9] iio: adis16400: do not return ints in irq handlers Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,3/9] iio: adis16475: do not return ints in irq handlers Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,4/9] iio: adis_buffer: check return value on page change Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,5/9] iio: adis_buffer: don't push data to buffers on failure Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,6/9] iio: adis_buffer: update device page after changing it Adis IRQ fixes and minor improvements - - - --- 2021-04-22 Nuno Sá New
[v2,7/9] iio: adis: add burst_max_speed_hz variable Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
[v2,8/9] iio: adis16475: do not directly change spi 'max_speed_hz' Adis IRQ fixes and minor improvements - 1 - --- 2021-04-22 Nuno Sá New
« 1 2 3 44 5 »