Show patches with: Submitter = Lorenzo Bianconi       |    State = Action Required       |   50 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[01/13] iio: imu: st_lsm6dsx: use st_lsm6dsx_read_locked in st_lsm6dsx_report_motion_event various st_lsm6dsx fixes and missing bits - - 1 0 0 0 2019-10-06 Lorenzo Bianconi New
[02/13] iio: imu: st_lsm6dsx: add sanity check for read_fifo pointer various st_lsm6dsx fixes and missing bits - - 1 0 0 0 2019-10-06 Lorenzo Bianconi New
[03/13] iio: imu: st_lsm6dsx: move irq related definitions in irq_config various st_lsm6dsx fixes and missing bits - - 1 0 0 0 2019-10-06 Lorenzo Bianconi New
[04/13] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[05/13] iio: imu: st_lsm6dsx: move bdu/boot and reset register info in hw_settings various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[06/13] iio: imu: st_lsm6dsx: always check enable_reg in st_lsm6dsx_event_setup various st_lsm6dsx fixes and missing bits - - 1 0 0 0 2019-10-06 Lorenzo Bianconi New
[07/13] iio: imu: st_lsm6dsx: rely on st_lsm6dsx_update_bits_locked configuring events various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[08/13] iio: imu: st_lsm6dsx: grab conf mutex in st_lsm6dsx_write_event_config various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[09/13] iio: imu: st_lsm6dsx: fix checkpatch warning various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH add support for ASM330LHH - - 1 0 0 0 2019-02-21 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to ISM330DHCX add support to STM ISM330DHCX 6-axis Mems sensor - - - 0 0 0 2019-08-05 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to LSM6DS0 add support to STM LSM6DS0 6-axis Mems sensor - - - 0 0 0 2019-10-07 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C add support to STM LSM6DS3TR-C 6-axis Mems sensor - - - 0 0 0 2019-06-29 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX add support for LSM6DSOX - - - 0 0 0 2019-03-15 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: add support to LSM6DSR add support for LSM6DSR - - - 0 0 0 2019-04-04 Lorenzo Bianconi New
[1/2] iio: imu: st_lsm6dsx: enable LIR for sensor events enable LIR and clear_on_read for st_lsm6dsx - - 1 0 0 0 2019-09-11 Lorenzo Bianconi New
[1/3] iio: imu: st_lsm6dsx: move irq related definitions in irq_config st_lsm6dsx: do not access active-low/open-drain if not supported - - 1 0 0 0 2019-09-22 Lorenzo Bianconi New
[1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings st_lsm6dsx: move {odr,fs}_table in - 1 1 0 0 0 2019-07-15 Lorenzo Bianconi New
[10/13] iio: imu: st_lsm6dsx: add wakeup_source in st_sensors_platform_data various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[11/13] iio: imu: st_lsm6dsx: add missing kernel documenation various st_lsm6dsx fixes and missing bits - 1 - 0 0 0 2019-10-06 Lorenzo Bianconi New
[12/13] dt-bindings: iio: imu: st_lsm6dsx: document missing wakeup-source property various st_lsm6dsx fixes and missing bits - 1 - 0 0 0 2019-10-06 Lorenzo Bianconi New
[13/13] iio: imu: st_lsm6dsx: enable wake-up event for LSM6DSO various st_lsm6dsx fixes and missing bits - - - 0 0 0 2019-10-06 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings add support for ASM330LHH - - - 0 0 0 2019-02-21 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings add support to STM ISM330DHCX 6-axis Mems sensor - - - 0 0 0 2019-08-05 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings add support to STM LSM6DS0 6-axis Mems sensor - - - 0 0 0 2019-10-07 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings add support to STM LSM6DS3TR-C 6-axis Mems sensor - - - 0 0 0 2019-06-29 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings add support for LSM6DSOX - - - 0 0 0 2019-03-15 Lorenzo Bianconi New
[2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsr device bindings add support for LSM6DSR - 1 - 0 0 0 2019-04-04 Lorenzo Bianconi New
[2/2] iio: imu: st_lsm6dsx: enable clear on read for latched interrupts enable LIR and clear_on_read for st_lsm6dsx - - 1 0 0 0 2019-09-11 Lorenzo Bianconi New
[2/3] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported st_lsm6dsx: do not access active-low/open-drain if not supported - - 1 0 0 0 2019-09-22 Lorenzo Bianconi New
[2/3] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings st_lsm6dsx: move {odr,fs}_table in - 1 1 0 0 0 2019-07-15 Lorenzo Bianconi New
[3/3] iio: imu: st_lsm6dsx: add sanity check for read_fifo pointer st_lsm6dsx: do not access active-low/open-drain if not supported - - 1 0 0 0 2019-09-22 Lorenzo Bianconi New
[3/3] iio: imu: st_lsm6dsx: inline acc/gyro output regs st_lsm6dsx: move {odr,fs}_table in - - - 0 0 0 2019-07-15 Lorenzo Bianconi New
[v2,1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings st_lsm6dsx: move {odr,fs}_table in - - 1 0 0 0 2019-07-29 Lorenzo Bianconi New
[v2,2/4] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings st_lsm6dsx: move {odr,fs}_table in - - 1 0 0 0 2019-07-29 Lorenzo Bianconi New
[v2,3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs st_lsm6dsx: move {odr,fs}_table in - - 1 0 0 0 2019-07-29 Lorenzo Bianconi New
[v2,4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings st_lsm6dsx: move {odr,fs}_table in - - 1 0 0 0 2019-07-29 Lorenzo Bianconi New
[v2] iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings [v2] iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings - - - 0 0 0 2019-06-07 Lorenzo Bianconi New
[v3] iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings [v3] iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings - - - 0 0 0 2019-06-08 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: enable drdy-mask if available iio: imu: st_lsm6dsx: enable drdy-mask if available - - 1 0 0 0 2019-10-08 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: explicitly define odr table size iio: imu: st_lsm6dsx: explicitly define odr table size - - - 0 0 0 2019-10-07 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1 iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1 - - - 0 0 0 2019-10-07 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller - - - 0 0 0 2019-05-19 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller - - - 0 0 0 2019-09-16 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity - - - 0 0 0 2019-08-31 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_dev_name iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_dev_name - - - 0 0 0 2019-06-06 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: inline per-sensor data iio: imu: st_lsm6dsx: inline per-sensor data - - - 0 0 0 2019-04-09 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: introduce update_fifo function pointer iio: imu: st_lsm6dsx: introduce update_fifo function pointer - - - 0 0 0 2019-08-19 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1 iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1 - - - 0 0 0 2019-08-27 Lorenzo Bianconi New
iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1 iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1 - - - 0 0 0 2019-08-27 Lorenzo Bianconi New