diff mbox

[v2,12/13] iio: health: max30102: Add MAX30105 support

Message ID 1509133543-4597-13-git-send-email-pmeerw@pmeerw.net
State New, archived
Headers show

Commit Message

Peter Meerwald-Stadler Oct. 27, 2017, 7:45 p.m. UTC
The Maxim MAX30105 part adds a third LED (green) and uses a multi-LED
measuring mode producing three measurements

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/iio/health/max30102.c | 144 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 130 insertions(+), 14 deletions(-)

Comments

Matt Ranostay Nov. 19, 2017, 9 p.m. UTC | #1
On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler
<pmeerw@pmeerw.net> wrote:
> The Maxim MAX30105 part adds a third LED (green) and uses a multi-LED
> measuring mode producing three measurements
>
> Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Matt Ranostay <matt.ranostay@konsulko.com>

Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>

> ---
>  drivers/iio/health/max30102.c | 144 ++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 130 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
> index 86058f0..15ccadc 100644
> --- a/drivers/iio/health/max30102.c
> +++ b/drivers/iio/health/max30102.c
> @@ -3,6 +3,9 @@
>   *
>   * Copyright (C) 2017 Matt Ranostay <matt@ranostay.consulting>
>   *
> + * Support for MAX30105 optical particle sensor
> + * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> + *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
>   * the Free Software Foundation; either version 2 of the License, or
> @@ -13,6 +16,7 @@
>   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>   * GNU General Public License for more details.
>   *
> + * 7-bit I2C chip address: 0x57
>   * TODO: proximity power saving feature
>   */
>
> @@ -34,9 +38,15 @@
>  #define MAX30102_DRV_NAME      "max30102"
>  #define MAX30102_PART_NUMBER   0x15
>
> +enum max30102_chip_id {
> +       max30102,
> +       max30105,
> +};
> +
>  enum max3012_led_idx {
>         MAX30102_LED_RED,
>         MAX30102_LED_IR,
> +       MAX30105_LED_GREEN,
>  };
>
>  #define MAX30102_REG_INT_STATUS                        0x00
> @@ -73,6 +83,11 @@ enum max3012_led_idx {
>  #define MAX30102_REG_MODE_CONFIG_MODE_MASK     GENMASK(2, 0)
>  #define MAX30102_REG_MODE_CONFIG_PWR           BIT(7)
>
> +#define MAX30102_REG_MODE_CONTROL_SLOT21       0x11 /* multi-LED control */
> +#define MAX30102_REG_MODE_CONTROL_SLOT43       0x12
> +#define MAX30102_REG_MODE_CONTROL_SLOT_MASK    (GENMASK(6, 4) | GENMASK(2, 0))
> +#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT   4

I assume slot is some time multiplexing of the LEDs?

> +
>  #define MAX30102_REG_SPO2_CONFIG               0x0a
>  #define MAX30102_REG_SPO2_CONFIG_PULSE_411_US  0x03
>  #define MAX30102_REG_SPO2_CONFIG_SR_400HZ      0x03
> @@ -83,6 +98,7 @@ enum max3012_led_idx {
>
>  #define MAX30102_REG_RED_LED_CONFIG            0x0c
>  #define MAX30102_REG_IR_LED_CONFIG             0x0d
> +#define MAX30105_REG_GREEN_LED_CONFIG          0x0e
>
>  #define MAX30102_REG_TEMP_CONFIG               0x21
>  #define MAX30102_REG_TEMP_CONFIG_TEMP_EN       BIT(0)
> @@ -98,9 +114,10 @@ struct max30102_data {
>         struct iio_dev *indio_dev;
>         struct mutex lock;
>         struct regmap *regmap;
> +       enum max30102_chip_id chip_id;
>
> -       u8 buffer[8];
> -       __be32 processed_buffer[2]; /* 2 x 18-bit (padded to 32-bits) */
> +       u8 buffer[12];
> +       __be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
>  };
>
>  static const struct regmap_config max30102_regmap_config = {
> @@ -115,6 +132,13 @@ static const unsigned long max30102_scan_masks[] = {
>         0
>  };
>
> +static const unsigned long max30105_scan_masks[] = {
> +       BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
> +       BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
> +               BIT(MAX30105_LED_GREEN),
> +       0
> +};
> +
>  #define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
>                 .type = IIO_INTENSITY, \
>                 .channel2 = _mod, \
> @@ -140,6 +164,18 @@ static const struct iio_chan_spec max30102_channels[] = {
>         },
>  };
>
> +static const struct iio_chan_spec max30105_channels[] = {
> +       MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
> +       MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
> +       MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
> +       {
> +               .type = IIO_TEMP,
> +               .info_mask_separate =
> +                       BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> +               .scan_index = -1,
> +       },
> +};
> +
>  static int max30102_set_power(struct max30102_data *data, bool en)
>  {
>         return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
> @@ -159,12 +195,40 @@ static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
>                                   MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
>  }
>
> +#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
> +       ((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
> +
>  static int max30102_buffer_postenable(struct iio_dev *indio_dev)
>  {
>         struct max30102_data *data = iio_priv(indio_dev);
> +       int ret;
>         u8 reg;
>
> -       reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
> +       switch (*indio_dev->active_scan_mask) {
> +       case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
> +               reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
> +               break;
> +       case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
> +            BIT(MAX30105_LED_GREEN):
> +               ret = regmap_update_bits(data->regmap,
> +                                        MAX30102_REG_MODE_CONTROL_SLOT21,
> +                                        MAX30102_REG_MODE_CONTROL_SLOT_MASK,
> +                                        MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
> +               if (ret)
> +                       return ret;
> +
> +               ret = regmap_update_bits(data->regmap,
> +                                        MAX30102_REG_MODE_CONTROL_SLOT43,
> +                                        MAX30102_REG_MODE_CONTROL_SLOT_MASK,
> +                                        MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
> +               if (ret)
> +                       return ret;
> +
> +               reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
> +               break;
> +       default:
> +               return -EINVAL;
> +       }
>
>         return max30102_set_powermode(data, reg, true);
>  }
> @@ -203,32 +267,46 @@ static inline int max30102_fifo_count(struct max30102_data *data)
>                &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
>                MAX30102_REG_FIFO_DATA_BYTES)
>
> -static int max30102_read_measurement(struct max30102_data *data)
> +static int max30102_read_measurement(struct max30102_data *data,
> +                                    unsigned int measurements)
>  {
>         int ret;
>         u8 *buffer = (u8 *) &data->buffer;
>
>         ret = i2c_smbus_read_i2c_block_data(data->client,
>                                             MAX30102_REG_FIFO_DATA,
> -                                           2 * MAX30102_REG_FIFO_DATA_BYTES,
> +                                           measurements *
> +                                           MAX30102_REG_FIFO_DATA_BYTES,
>                                             buffer);
>
> -       MAX30102_COPY_DATA(0);
> -       MAX30102_COPY_DATA(1);
> +       switch (measurements) {
> +       case 3:
> +               MAX30102_COPY_DATA(2);
> +       case 2: /* fall-through */
> +               MAX30102_COPY_DATA(1);
> +       case 1: /* fall-through */
> +               MAX30102_COPY_DATA(0);
> +               break;
> +       default:
> +               return -EINVAL;
> +       }
>
> -       return (ret == 2 * MAX30102_REG_FIFO_DATA_BYTES) ? 0 : -EINVAL;
> +       return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
> +              0 : -EINVAL;
>  }
>
>  static irqreturn_t max30102_interrupt_handler(int irq, void *private)
>  {
>         struct iio_dev *indio_dev = private;
>         struct max30102_data *data = iio_priv(indio_dev);
> +       unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
> +                                                 indio_dev->masklength);
>         int ret, cnt = 0;
>
>         mutex_lock(&data->lock);
>
>         while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
> -               ret = max30102_read_measurement(data);
> +               ret = max30102_read_measurement(data, measurements);
>                 if (ret)
>                         break;
>
> @@ -274,6 +352,29 @@ static int max30102_led_init(struct max30102_data *data)
>         if (ret)
>                 return ret;
>
> +       if (data->chip_id == max30105) {
> +               ret = of_property_read_u32(np,
> +                       "maxim,green-led-current-microamp", &val);
> +               if (ret) {
> +                       dev_info(dev, "no green-led-current-microamp set\n");
> +
> +                       /* Default to 7 mA green LED */
> +                       val = 7000;
> +               }
> +
> +               ret = max30102_get_current_idx(val, &reg);
> +               if (ret) {
> +                       dev_err(dev, "invalid green LED current setting %d\n",
> +                               val);
> +                       return ret;
> +               }
> +
> +               ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
> +                                  reg);
> +               if (ret)
> +                       return ret;
> +       }
> +
>         ret = of_property_read_u32(np, "maxim,ir-led-current-microamp", &val);
>         if (ret) {
>                 dev_info(dev, "no ir-led-current-microamp set\n");
> @@ -429,10 +530,7 @@ static int max30102_probe(struct i2c_client *client,
>         iio_device_attach_buffer(indio_dev, buffer);
>
>         indio_dev->name = MAX30102_DRV_NAME;
> -       indio_dev->channels = max30102_channels;
>         indio_dev->info = &max30102_info;
> -       indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
> -       indio_dev->available_scan_masks = max30102_scan_masks;
>         indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
>         indio_dev->setup_ops = &max30102_buffer_setup_ops;
>         indio_dev->dev.parent = &client->dev;
> @@ -440,10 +538,26 @@ static int max30102_probe(struct i2c_client *client,
>         data = iio_priv(indio_dev);
>         data->indio_dev = indio_dev;
>         data->client = client;
> +       data->chip_id = id->driver_data;
>
>         mutex_init(&data->lock);
>         i2c_set_clientdata(client, indio_dev);
>
> +       switch (data->chip_id) {
> +       case max30105:
> +               indio_dev->channels = max30105_channels;
> +               indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
> +               indio_dev->available_scan_masks = max30105_scan_masks;
> +               break;
> +       case max30102:
> +               indio_dev->channels = max30102_channels;
> +               indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
> +               indio_dev->available_scan_masks = max30102_scan_masks;
> +               break;
> +       default:
> +               return -ENODEV;
> +       }
> +
>         data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
>         if (IS_ERR(data->regmap)) {
>                 dev_err(&client->dev, "regmap initialization failed\n");
> @@ -502,13 +616,15 @@ static int max30102_remove(struct i2c_client *client)
>  }
>
>  static const struct i2c_device_id max30102_id[] = {
> -       { "max30102", 0 },
> +       { "max30102", max30102 },
> +       { "max30105", max30105 },
>         {}
>  };
>  MODULE_DEVICE_TABLE(i2c, max30102_id);
>
>  static const struct of_device_id max30102_dt_ids[] = {
>         { .compatible = "maxim,max30102" },
> +       { .compatible = "maxim,max30105" },
>         { }
>  };
>  MODULE_DEVICE_TABLE(of, max30102_dt_ids);
> @@ -525,5 +641,5 @@ static struct i2c_driver max30102_driver = {
>  module_i2c_driver(max30102_driver);
>
>  MODULE_AUTHOR("Matt Ranostay <matt@ranostay.consulting>");
> -MODULE_DESCRIPTION("MAX30102 heart rate and pulse oximeter sensor");
> +MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
>  MODULE_LICENSE("GPL");
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Nov. 25, 2017, 2:19 p.m. UTC | #2
On Sun, 19 Nov 2017 13:00:51 -0800
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler
> <pmeerw@pmeerw.net> wrote:
> > The Maxim MAX30105 part adds a third LED (green) and uses a multi-LED
> > measuring mode producing three measurements
> >
> > Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> > Cc: Matt Ranostay <matt.ranostay@konsulko.com>  
> 
> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Applied.
> 
> > ---
> >  drivers/iio/health/max30102.c | 144 ++++++++++++++++++++++++++++++++++++++----
> >  1 file changed, 130 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
> > index 86058f0..15ccadc 100644
> > --- a/drivers/iio/health/max30102.c
> > +++ b/drivers/iio/health/max30102.c
> > @@ -3,6 +3,9 @@
> >   *
> >   * Copyright (C) 2017 Matt Ranostay <matt@ranostay.consulting>
> >   *
> > + * Support for MAX30105 optical particle sensor
> > + * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> > + *
> >   * This program is free software; you can redistribute it and/or modify
> >   * it under the terms of the GNU General Public License as published by
> >   * the Free Software Foundation; either version 2 of the License, or
> > @@ -13,6 +16,7 @@
> >   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >   * GNU General Public License for more details.
> >   *
> > + * 7-bit I2C chip address: 0x57
> >   * TODO: proximity power saving feature
> >   */
> >
> > @@ -34,9 +38,15 @@
> >  #define MAX30102_DRV_NAME      "max30102"
> >  #define MAX30102_PART_NUMBER   0x15
> >
> > +enum max30102_chip_id {
> > +       max30102,
> > +       max30105,
> > +};
> > +
> >  enum max3012_led_idx {
> >         MAX30102_LED_RED,
> >         MAX30102_LED_IR,
> > +       MAX30105_LED_GREEN,
> >  };
> >
> >  #define MAX30102_REG_INT_STATUS                        0x00
> > @@ -73,6 +83,11 @@ enum max3012_led_idx {
> >  #define MAX30102_REG_MODE_CONFIG_MODE_MASK     GENMASK(2, 0)
> >  #define MAX30102_REG_MODE_CONFIG_PWR           BIT(7)
> >
> > +#define MAX30102_REG_MODE_CONTROL_SLOT21       0x11 /* multi-LED control */
> > +#define MAX30102_REG_MODE_CONTROL_SLOT43       0x12
> > +#define MAX30102_REG_MODE_CONTROL_SLOT_MASK    (GENMASK(6, 4) | GENMASK(2, 0))
> > +#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT   4  
> 
> I assume slot is some time multiplexing of the LEDs?
> 
> > +
> >  #define MAX30102_REG_SPO2_CONFIG               0x0a
> >  #define MAX30102_REG_SPO2_CONFIG_PULSE_411_US  0x03
> >  #define MAX30102_REG_SPO2_CONFIG_SR_400HZ      0x03
> > @@ -83,6 +98,7 @@ enum max3012_led_idx {
> >
> >  #define MAX30102_REG_RED_LED_CONFIG            0x0c
> >  #define MAX30102_REG_IR_LED_CONFIG             0x0d
> > +#define MAX30105_REG_GREEN_LED_CONFIG          0x0e
> >
> >  #define MAX30102_REG_TEMP_CONFIG               0x21
> >  #define MAX30102_REG_TEMP_CONFIG_TEMP_EN       BIT(0)
> > @@ -98,9 +114,10 @@ struct max30102_data {
> >         struct iio_dev *indio_dev;
> >         struct mutex lock;
> >         struct regmap *regmap;
> > +       enum max30102_chip_id chip_id;
> >
> > -       u8 buffer[8];
> > -       __be32 processed_buffer[2]; /* 2 x 18-bit (padded to 32-bits) */
> > +       u8 buffer[12];
> > +       __be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
> >  };
> >
> >  static const struct regmap_config max30102_regmap_config = {
> > @@ -115,6 +132,13 @@ static const unsigned long max30102_scan_masks[] = {
> >         0
> >  };
> >
> > +static const unsigned long max30105_scan_masks[] = {
> > +       BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
> > +       BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
> > +               BIT(MAX30105_LED_GREEN),
> > +       0
> > +};
> > +
> >  #define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
> >                 .type = IIO_INTENSITY, \
> >                 .channel2 = _mod, \
> > @@ -140,6 +164,18 @@ static const struct iio_chan_spec max30102_channels[] = {
> >         },
> >  };
> >
> > +static const struct iio_chan_spec max30105_channels[] = {
> > +       MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
> > +       MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
> > +       MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
> > +       {
> > +               .type = IIO_TEMP,
> > +               .info_mask_separate =
> > +                       BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> > +               .scan_index = -1,
> > +       },
> > +};
> > +
> >  static int max30102_set_power(struct max30102_data *data, bool en)
> >  {
> >         return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
> > @@ -159,12 +195,40 @@ static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
> >                                   MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
> >  }
> >
> > +#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
> > +       ((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
> > +
> >  static int max30102_buffer_postenable(struct iio_dev *indio_dev)
> >  {
> >         struct max30102_data *data = iio_priv(indio_dev);
> > +       int ret;
> >         u8 reg;
> >
> > -       reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
> > +       switch (*indio_dev->active_scan_mask) {
> > +       case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
> > +               reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
> > +               break;
> > +       case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
> > +            BIT(MAX30105_LED_GREEN):
> > +               ret = regmap_update_bits(data->regmap,
> > +                                        MAX30102_REG_MODE_CONTROL_SLOT21,
> > +                                        MAX30102_REG_MODE_CONTROL_SLOT_MASK,
> > +                                        MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
> > +               if (ret)
> > +                       return ret;
> > +
> > +               ret = regmap_update_bits(data->regmap,
> > +                                        MAX30102_REG_MODE_CONTROL_SLOT43,
> > +                                        MAX30102_REG_MODE_CONTROL_SLOT_MASK,
> > +                                        MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
> > +               if (ret)
> > +                       return ret;
> > +
> > +               reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
> > +               break;
> > +       default:
> > +               return -EINVAL;
> > +       }
> >
> >         return max30102_set_powermode(data, reg, true);
> >  }
> > @@ -203,32 +267,46 @@ static inline int max30102_fifo_count(struct max30102_data *data)
> >                &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
> >                MAX30102_REG_FIFO_DATA_BYTES)
> >
> > -static int max30102_read_measurement(struct max30102_data *data)
> > +static int max30102_read_measurement(struct max30102_data *data,
> > +                                    unsigned int measurements)
> >  {
> >         int ret;
> >         u8 *buffer = (u8 *) &data->buffer;
> >
> >         ret = i2c_smbus_read_i2c_block_data(data->client,
> >                                             MAX30102_REG_FIFO_DATA,
> > -                                           2 * MAX30102_REG_FIFO_DATA_BYTES,
> > +                                           measurements *
> > +                                           MAX30102_REG_FIFO_DATA_BYTES,
> >                                             buffer);
> >
> > -       MAX30102_COPY_DATA(0);
> > -       MAX30102_COPY_DATA(1);
> > +       switch (measurements) {
> > +       case 3:
> > +               MAX30102_COPY_DATA(2);
> > +       case 2: /* fall-through */
> > +               MAX30102_COPY_DATA(1);
> > +       case 1: /* fall-through */
> > +               MAX30102_COPY_DATA(0);
> > +               break;
> > +       default:
> > +               return -EINVAL;
> > +       }
> >
> > -       return (ret == 2 * MAX30102_REG_FIFO_DATA_BYTES) ? 0 : -EINVAL;
> > +       return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
> > +              0 : -EINVAL;
> >  }
> >
> >  static irqreturn_t max30102_interrupt_handler(int irq, void *private)
> >  {
> >         struct iio_dev *indio_dev = private;
> >         struct max30102_data *data = iio_priv(indio_dev);
> > +       unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
> > +                                                 indio_dev->masklength);
> >         int ret, cnt = 0;
> >
> >         mutex_lock(&data->lock);
> >
> >         while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
> > -               ret = max30102_read_measurement(data);
> > +               ret = max30102_read_measurement(data, measurements);
> >                 if (ret)
> >                         break;
> >
> > @@ -274,6 +352,29 @@ static int max30102_led_init(struct max30102_data *data)
> >         if (ret)
> >                 return ret;
> >
> > +       if (data->chip_id == max30105) {
> > +               ret = of_property_read_u32(np,
> > +                       "maxim,green-led-current-microamp", &val);
> > +               if (ret) {
> > +                       dev_info(dev, "no green-led-current-microamp set\n");
> > +
> > +                       /* Default to 7 mA green LED */
> > +                       val = 7000;
> > +               }
> > +
> > +               ret = max30102_get_current_idx(val, &reg);
> > +               if (ret) {
> > +                       dev_err(dev, "invalid green LED current setting %d\n",
> > +                               val);
> > +                       return ret;
> > +               }
> > +
> > +               ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
> > +                                  reg);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > +
> >         ret = of_property_read_u32(np, "maxim,ir-led-current-microamp", &val);
> >         if (ret) {
> >                 dev_info(dev, "no ir-led-current-microamp set\n");
> > @@ -429,10 +530,7 @@ static int max30102_probe(struct i2c_client *client,
> >         iio_device_attach_buffer(indio_dev, buffer);
> >
> >         indio_dev->name = MAX30102_DRV_NAME;
> > -       indio_dev->channels = max30102_channels;
> >         indio_dev->info = &max30102_info;
> > -       indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
> > -       indio_dev->available_scan_masks = max30102_scan_masks;
> >         indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
> >         indio_dev->setup_ops = &max30102_buffer_setup_ops;
> >         indio_dev->dev.parent = &client->dev;
> > @@ -440,10 +538,26 @@ static int max30102_probe(struct i2c_client *client,
> >         data = iio_priv(indio_dev);
> >         data->indio_dev = indio_dev;
> >         data->client = client;
> > +       data->chip_id = id->driver_data;
> >
> >         mutex_init(&data->lock);
> >         i2c_set_clientdata(client, indio_dev);
> >
> > +       switch (data->chip_id) {
> > +       case max30105:
> > +               indio_dev->channels = max30105_channels;
> > +               indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
> > +               indio_dev->available_scan_masks = max30105_scan_masks;
> > +               break;
> > +       case max30102:
> > +               indio_dev->channels = max30102_channels;
> > +               indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
> > +               indio_dev->available_scan_masks = max30102_scan_masks;
> > +               break;
> > +       default:
> > +               return -ENODEV;
> > +       }
> > +
> >         data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
> >         if (IS_ERR(data->regmap)) {
> >                 dev_err(&client->dev, "regmap initialization failed\n");
> > @@ -502,13 +616,15 @@ static int max30102_remove(struct i2c_client *client)
> >  }
> >
> >  static const struct i2c_device_id max30102_id[] = {
> > -       { "max30102", 0 },
> > +       { "max30102", max30102 },
> > +       { "max30105", max30105 },
> >         {}
> >  };
> >  MODULE_DEVICE_TABLE(i2c, max30102_id);
> >
> >  static const struct of_device_id max30102_dt_ids[] = {
> >         { .compatible = "maxim,max30102" },
> > +       { .compatible = "maxim,max30105" },
> >         { }
> >  };
> >  MODULE_DEVICE_TABLE(of, max30102_dt_ids);
> > @@ -525,5 +641,5 @@ static struct i2c_driver max30102_driver = {
> >  module_i2c_driver(max30102_driver);
> >
> >  MODULE_AUTHOR("Matt Ranostay <matt@ranostay.consulting>");
> > -MODULE_DESCRIPTION("MAX30102 heart rate and pulse oximeter sensor");
> > +MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
> >  MODULE_LICENSE("GPL");
> > --
> > 2.7.4
> >  

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
index 86058f0..15ccadc 100644
--- a/drivers/iio/health/max30102.c
+++ b/drivers/iio/health/max30102.c
@@ -3,6 +3,9 @@ 
  *
  * Copyright (C) 2017 Matt Ranostay <matt@ranostay.consulting>
  *
+ * Support for MAX30105 optical particle sensor
+ * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -13,6 +16,7 @@ 
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
+ * 7-bit I2C chip address: 0x57
  * TODO: proximity power saving feature
  */
 
@@ -34,9 +38,15 @@ 
 #define MAX30102_DRV_NAME	"max30102"
 #define MAX30102_PART_NUMBER	0x15
 
+enum max30102_chip_id {
+	max30102,
+	max30105,
+};
+
 enum max3012_led_idx {
 	MAX30102_LED_RED,
 	MAX30102_LED_IR,
+	MAX30105_LED_GREEN,
 };
 
 #define MAX30102_REG_INT_STATUS			0x00
@@ -73,6 +83,11 @@  enum max3012_led_idx {
 #define MAX30102_REG_MODE_CONFIG_MODE_MASK	GENMASK(2, 0)
 #define MAX30102_REG_MODE_CONFIG_PWR		BIT(7)
 
+#define MAX30102_REG_MODE_CONTROL_SLOT21	0x11 /* multi-LED control */
+#define MAX30102_REG_MODE_CONTROL_SLOT43	0x12
+#define MAX30102_REG_MODE_CONTROL_SLOT_MASK	(GENMASK(6, 4) | GENMASK(2, 0))
+#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT	4
+
 #define MAX30102_REG_SPO2_CONFIG		0x0a
 #define MAX30102_REG_SPO2_CONFIG_PULSE_411_US	0x03
 #define MAX30102_REG_SPO2_CONFIG_SR_400HZ	0x03
@@ -83,6 +98,7 @@  enum max3012_led_idx {
 
 #define MAX30102_REG_RED_LED_CONFIG		0x0c
 #define MAX30102_REG_IR_LED_CONFIG		0x0d
+#define MAX30105_REG_GREEN_LED_CONFIG		0x0e
 
 #define MAX30102_REG_TEMP_CONFIG		0x21
 #define MAX30102_REG_TEMP_CONFIG_TEMP_EN	BIT(0)
@@ -98,9 +114,10 @@  struct max30102_data {
 	struct iio_dev *indio_dev;
 	struct mutex lock;
 	struct regmap *regmap;
+	enum max30102_chip_id chip_id;
 
-	u8 buffer[8];
-	__be32 processed_buffer[2]; /* 2 x 18-bit (padded to 32-bits) */
+	u8 buffer[12];
+	__be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
 };
 
 static const struct regmap_config max30102_regmap_config = {
@@ -115,6 +132,13 @@  static const unsigned long max30102_scan_masks[] = {
 	0
 };
 
+static const unsigned long max30105_scan_masks[] = {
+	BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
+	BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
+		BIT(MAX30105_LED_GREEN),
+	0
+};
+
 #define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
 		.type = IIO_INTENSITY, \
 		.channel2 = _mod, \
@@ -140,6 +164,18 @@  static const struct iio_chan_spec max30102_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec max30105_channels[] = {
+	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
+	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
+	MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = -1,
+	},
+};
+
 static int max30102_set_power(struct max30102_data *data, bool en)
 {
 	return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
@@ -159,12 +195,40 @@  static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
 				  MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
 }
 
+#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
+	((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
+
 static int max30102_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct max30102_data *data = iio_priv(indio_dev);
+	int ret;
 	u8 reg;
 
-	reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
+	switch (*indio_dev->active_scan_mask) {
+	case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
+		reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
+		break;
+	case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
+	     BIT(MAX30105_LED_GREEN):
+		ret = regmap_update_bits(data->regmap,
+					 MAX30102_REG_MODE_CONTROL_SLOT21,
+					 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
+					 MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
+		if (ret)
+			return ret;
+
+		ret = regmap_update_bits(data->regmap,
+					 MAX30102_REG_MODE_CONTROL_SLOT43,
+					 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
+					 MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
+		if (ret)
+			return ret;
+
+		reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	return max30102_set_powermode(data, reg, true);
 }
@@ -203,32 +267,46 @@  static inline int max30102_fifo_count(struct max30102_data *data)
 	       &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
 	       MAX30102_REG_FIFO_DATA_BYTES)
 
-static int max30102_read_measurement(struct max30102_data *data)
+static int max30102_read_measurement(struct max30102_data *data,
+				     unsigned int measurements)
 {
 	int ret;
 	u8 *buffer = (u8 *) &data->buffer;
 
 	ret = i2c_smbus_read_i2c_block_data(data->client,
 					    MAX30102_REG_FIFO_DATA,
-					    2 * MAX30102_REG_FIFO_DATA_BYTES,
+					    measurements *
+					    MAX30102_REG_FIFO_DATA_BYTES,
 					    buffer);
 
-	MAX30102_COPY_DATA(0);
-	MAX30102_COPY_DATA(1);
+	switch (measurements) {
+	case 3:
+		MAX30102_COPY_DATA(2);
+	case 2: /* fall-through */
+		MAX30102_COPY_DATA(1);
+	case 1: /* fall-through */
+		MAX30102_COPY_DATA(0);
+		break;
+	default:
+		return -EINVAL;
+	}
 
-	return (ret == 2 * MAX30102_REG_FIFO_DATA_BYTES) ? 0 : -EINVAL;
+	return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
+	       0 : -EINVAL;
 }
 
 static irqreturn_t max30102_interrupt_handler(int irq, void *private)
 {
 	struct iio_dev *indio_dev = private;
 	struct max30102_data *data = iio_priv(indio_dev);
+	unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
+						  indio_dev->masklength);
 	int ret, cnt = 0;
 
 	mutex_lock(&data->lock);
 
 	while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
-		ret = max30102_read_measurement(data);
+		ret = max30102_read_measurement(data, measurements);
 		if (ret)
 			break;
 
@@ -274,6 +352,29 @@  static int max30102_led_init(struct max30102_data *data)
 	if (ret)
 		return ret;
 
+	if (data->chip_id == max30105) {
+		ret = of_property_read_u32(np,
+			"maxim,green-led-current-microamp", &val);
+		if (ret) {
+			dev_info(dev, "no green-led-current-microamp set\n");
+
+			/* Default to 7 mA green LED */
+			val = 7000;
+		}
+
+		ret = max30102_get_current_idx(val, &reg);
+		if (ret) {
+			dev_err(dev, "invalid green LED current setting %d\n",
+				val);
+			return ret;
+		}
+
+		ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
+				   reg);
+		if (ret)
+			return ret;
+	}
+
 	ret = of_property_read_u32(np, "maxim,ir-led-current-microamp", &val);
 	if (ret) {
 		dev_info(dev, "no ir-led-current-microamp set\n");
@@ -429,10 +530,7 @@  static int max30102_probe(struct i2c_client *client,
 	iio_device_attach_buffer(indio_dev, buffer);
 
 	indio_dev->name = MAX30102_DRV_NAME;
-	indio_dev->channels = max30102_channels;
 	indio_dev->info = &max30102_info;
-	indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
-	indio_dev->available_scan_masks = max30102_scan_masks;
 	indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
 	indio_dev->setup_ops = &max30102_buffer_setup_ops;
 	indio_dev->dev.parent = &client->dev;
@@ -440,10 +538,26 @@  static int max30102_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	data->indio_dev = indio_dev;
 	data->client = client;
+	data->chip_id = id->driver_data;
 
 	mutex_init(&data->lock);
 	i2c_set_clientdata(client, indio_dev);
 
+	switch (data->chip_id) {
+	case max30105:
+		indio_dev->channels = max30105_channels;
+		indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
+		indio_dev->available_scan_masks = max30105_scan_masks;
+		break;
+	case max30102:
+		indio_dev->channels = max30102_channels;
+		indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
+		indio_dev->available_scan_masks = max30102_scan_masks;
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
 	if (IS_ERR(data->regmap)) {
 		dev_err(&client->dev, "regmap initialization failed\n");
@@ -502,13 +616,15 @@  static int max30102_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max30102_id[] = {
-	{ "max30102", 0 },
+	{ "max30102", max30102 },
+	{ "max30105", max30105 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, max30102_id);
 
 static const struct of_device_id max30102_dt_ids[] = {
 	{ .compatible = "maxim,max30102" },
+	{ .compatible = "maxim,max30105" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, max30102_dt_ids);
@@ -525,5 +641,5 @@  static struct i2c_driver max30102_driver = {
 module_i2c_driver(max30102_driver);
 
 MODULE_AUTHOR("Matt Ranostay <matt@ranostay.consulting>");
-MODULE_DESCRIPTION("MAX30102 heart rate and pulse oximeter sensor");
+MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
 MODULE_LICENSE("GPL");