diff mbox

[v2,04/13] iio: health: max30102: Fix mode config values

Message ID 1509133543-4597-5-git-send-email-pmeerw@pmeerw.net (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Meerwald-Stadler Oct. 27, 2017, 7:45 p.m. UTC
Table 4 of the datasheet specifies the mode control, these are not
individual bits; add multi LED mode

Add multi-LED mode and fix MODE_MASK (3 bits wide, not 2)

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/iio/health/max30102.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Matt Ranostay Nov. 19, 2017, 8:46 p.m. UTC | #1
On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler
<pmeerw@pmeerw.net> wrote:
> Table 4 of the datasheet specifies the mode control, these are not
> individual bits; add multi LED mode
>
> Add multi-LED mode and fix MODE_MASK (3 bits wide, not 2)

Yeah this much cleaner than the macros I had defined

Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>

>
> Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Matt Ranostay <matt.ranostay@konsulko.com>
> ---
>  drivers/iio/health/max30102.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
> index 6ca6182..13d5312 100644
> --- a/drivers/iio/health/max30102.c
> +++ b/drivers/iio/health/max30102.c
> @@ -60,9 +60,10 @@
>  #define MAX30102_REG_FIFO_CONFIG_AFULL         BIT(0)
>
>  #define MAX30102_REG_MODE_CONFIG               0x09
> -#define MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN  BIT(0)
> -#define MAX30102_REG_MODE_CONFIG_MODE_HR_EN    BIT(1)
> -#define MAX30102_REG_MODE_CONFIG_MODE_MASK     0x03
> +#define MAX30102_REG_MODE_CONFIG_MODE_HR       0x02 /* red LED */
> +#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2  0x03 /* red + IR LED */
> +#define MAX30102_REG_MODE_CONFIG_MODE_MULTI    0x07 /* multi-LED mode */
> +#define MAX30102_REG_MODE_CONFIG_MODE_MASK     GENMASK(2, 0)
>  #define MAX30102_REG_MODE_CONFIG_PWR           BIT(7)
>
>  #define MAX30102_REG_SPO2_CONFIG               0x0a
> @@ -287,11 +288,10 @@ static int max30102_chip_init(struct max30102_data *data)
>         if (ret)
>                 return ret;
>
> -       /* enable SPO2 mode */
> +       /* enable HR + SPO2 mode */
>         ret = regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
>                                  MAX30102_REG_MODE_CONFIG_MODE_MASK,
> -                                MAX30102_REG_MODE_CONFIG_MODE_HR_EN |
> -                                MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN);
> +                                MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2);
>         if (ret)
>                 return ret;
>
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Nov. 25, 2017, 2:07 p.m. UTC | #2
On Sun, 19 Nov 2017 12:46:40 -0800
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler
> <pmeerw@pmeerw.net> wrote:
> > Table 4 of the datasheet specifies the mode control, these are not
> > individual bits; add multi LED mode
> >
> > Add multi-LED mode and fix MODE_MASK (3 bits wide, not 2)  
> 
> Yeah this much cleaner than the macros I had defined
> 
> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
> 
Applied.
> >
> > Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> > Cc: Matt Ranostay <matt.ranostay@konsulko.com>
> > ---
> >  drivers/iio/health/max30102.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
> > index 6ca6182..13d5312 100644
> > --- a/drivers/iio/health/max30102.c
> > +++ b/drivers/iio/health/max30102.c
> > @@ -60,9 +60,10 @@
> >  #define MAX30102_REG_FIFO_CONFIG_AFULL         BIT(0)
> >
> >  #define MAX30102_REG_MODE_CONFIG               0x09
> > -#define MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN  BIT(0)
> > -#define MAX30102_REG_MODE_CONFIG_MODE_HR_EN    BIT(1)
> > -#define MAX30102_REG_MODE_CONFIG_MODE_MASK     0x03
> > +#define MAX30102_REG_MODE_CONFIG_MODE_HR       0x02 /* red LED */
> > +#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2  0x03 /* red + IR LED */
> > +#define MAX30102_REG_MODE_CONFIG_MODE_MULTI    0x07 /* multi-LED mode */
> > +#define MAX30102_REG_MODE_CONFIG_MODE_MASK     GENMASK(2, 0)
> >  #define MAX30102_REG_MODE_CONFIG_PWR           BIT(7)
> >
> >  #define MAX30102_REG_SPO2_CONFIG               0x0a
> > @@ -287,11 +288,10 @@ static int max30102_chip_init(struct max30102_data *data)
> >         if (ret)
> >                 return ret;
> >
> > -       /* enable SPO2 mode */
> > +       /* enable HR + SPO2 mode */
> >         ret = regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
> >                                  MAX30102_REG_MODE_CONFIG_MODE_MASK,
> > -                                MAX30102_REG_MODE_CONFIG_MODE_HR_EN |
> > -                                MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN);
> > +                                MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2);
> >         if (ret)
> >                 return ret;
> >
> > --
> > 2.7.4
> >  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
index 6ca6182..13d5312 100644
--- a/drivers/iio/health/max30102.c
+++ b/drivers/iio/health/max30102.c
@@ -60,9 +60,10 @@ 
 #define MAX30102_REG_FIFO_CONFIG_AFULL		BIT(0)
 
 #define MAX30102_REG_MODE_CONFIG		0x09
-#define MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN	BIT(0)
-#define MAX30102_REG_MODE_CONFIG_MODE_HR_EN	BIT(1)
-#define MAX30102_REG_MODE_CONFIG_MODE_MASK	0x03
+#define MAX30102_REG_MODE_CONFIG_MODE_HR	0x02 /* red LED */
+#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2	0x03 /* red + IR LED */
+#define MAX30102_REG_MODE_CONFIG_MODE_MULTI	0x07 /* multi-LED mode */
+#define MAX30102_REG_MODE_CONFIG_MODE_MASK	GENMASK(2, 0)
 #define MAX30102_REG_MODE_CONFIG_PWR		BIT(7)
 
 #define MAX30102_REG_SPO2_CONFIG		0x0a
@@ -287,11 +288,10 @@  static int max30102_chip_init(struct max30102_data *data)
 	if (ret)
 		return ret;
 
-	/* enable SPO2 mode */
+	/* enable HR + SPO2 mode */
 	ret = regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
 				 MAX30102_REG_MODE_CONFIG_MODE_MASK,
-				 MAX30102_REG_MODE_CONFIG_MODE_HR_EN |
-				 MAX30102_REG_MODE_CONFIG_MODE_SPO2_EN);
+				 MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2);
 	if (ret)
 		return ret;