diff mbox

[v4,3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data

Message ID 1524479613-23954-3-git-send-email-jmaneyrol@invensense.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jean-Baptiste Maneyrol April 23, 2018, 10:33 a.m. UTC 
Factorize reading channel data in its own function.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 116 +++++++++++++++--------------
 1 file changed, 62 insertions(+), 54 deletions(-)

Comments

Jonathan Cameron April 28, 2018, 3:54 p.m. UTC | #1 
On Mon, 23 Apr 2018 12:33:32 +0200
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> wrote:

> Factorize reading channel data in its own function.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Applied

Thanks,

Jonathan

> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 116 +++++++++++++++--------------
>  1 file changed, 62 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 45f57f7..79b44fd 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -332,6 +332,67 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state  *st, int reg,
>  	return IIO_VAL_INT;
>  }
>  
> +static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev,
> +					 struct iio_chan_spec const *chan,
> +					 int *val)
> +{
> +	struct inv_mpu6050_state *st = iio_priv(indio_dev);
> +	int result;
> +	int ret = IIO_VAL_INT;
> +
> +	result = iio_device_claim_direct_mode(indio_dev);
> +	if (result)
> +		return result;
> +	result = inv_mpu6050_set_power_itg(st, true);
> +	if (result)
> +		goto error_release;
> +
> +	switch (chan->type) {
> +	case IIO_ANGL_VEL:
> +		result = inv_mpu6050_switch_engine(st, true,
> +				INV_MPU6050_BIT_PWR_GYRO_STBY);
> +		if (result)
> +			goto error_power_off;
> +		ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
> +					      chan->channel2, val);
> +		result = inv_mpu6050_switch_engine(st, false,
> +				INV_MPU6050_BIT_PWR_GYRO_STBY);
> +		if (result)
> +			goto error_power_off;
> +		break;
> +	case IIO_ACCEL:
> +		result = inv_mpu6050_switch_engine(st, true,
> +				INV_MPU6050_BIT_PWR_ACCL_STBY);
> +		if (result)
> +			goto error_power_off;
> +		ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
> +					      chan->channel2, val);
> +		result = inv_mpu6050_switch_engine(st, false,
> +				INV_MPU6050_BIT_PWR_ACCL_STBY);
> +		if (result)
> +			goto error_power_off;
> +		break;
> +	case IIO_TEMP:
> +		/* wait for stablization */
> +		msleep(INV_MPU6050_SENSOR_UP_TIME);
> +		ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
> +					      IIO_MOD_X, val);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +error_power_off:
> +	result |= inv_mpu6050_set_power_itg(st, false);
> +error_release:
> +	iio_device_release_direct_mode(indio_dev);
> +	if (result)
> +		return result;
> +
> +	return ret;
> +}
> +
>  static int
>  inv_mpu6050_read_raw(struct iio_dev *indio_dev,
>  		     struct iio_chan_spec const *chan,
> @@ -342,63 +403,10 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_RAW:
> -	{
> -		int result;
> -
> -		ret = IIO_VAL_INT;
>  		mutex_lock(&st->lock);
> -		result = iio_device_claim_direct_mode(indio_dev);
> -		if (result)
> -			goto error_read_raw_unlock;
> -		result = inv_mpu6050_set_power_itg(st, true);
> -		if (result)
> -			goto error_read_raw_release;
> -		switch (chan->type) {
> -		case IIO_ANGL_VEL:
> -			result = inv_mpu6050_switch_engine(st, true,
> -					INV_MPU6050_BIT_PWR_GYRO_STBY);
> -			if (result)
> -				goto error_read_raw_power_off;
> -			ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
> -						      chan->channel2, val);
> -			result = inv_mpu6050_switch_engine(st, false,
> -					INV_MPU6050_BIT_PWR_GYRO_STBY);
> -			if (result)
> -				goto error_read_raw_power_off;
> -			break;
> -		case IIO_ACCEL:
> -			result = inv_mpu6050_switch_engine(st, true,
> -					INV_MPU6050_BIT_PWR_ACCL_STBY);
> -			if (result)
> -				goto error_read_raw_power_off;
> -			ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
> -						      chan->channel2, val);
> -			result = inv_mpu6050_switch_engine(st, false,
> -					INV_MPU6050_BIT_PWR_ACCL_STBY);
> -			if (result)
> -				goto error_read_raw_power_off;
> -			break;
> -		case IIO_TEMP:
> -			/* wait for stablization */
> -			msleep(INV_MPU6050_SENSOR_UP_TIME);
> -			ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
> -						IIO_MOD_X, val);
> -			break;
> -		default:
> -			ret = -EINVAL;
> -			break;
> -		}
> -error_read_raw_power_off:
> -		result |= inv_mpu6050_set_power_itg(st, false);
> -error_read_raw_release:
> -		iio_device_release_direct_mode(indio_dev);
> -error_read_raw_unlock:
> +		ret = inv_mpu6050_read_channel_data(indio_dev, chan, val);
>  		mutex_unlock(&st->lock);
> -		if (result)
> -			return result;
> -
>  		return ret;
> -	}
>  	case IIO_CHAN_INFO_SCALE:
>  		switch (chan->type) {
>  		case IIO_ANGL_VEL:

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 45f57f7..79b44fd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -332,6 +332,67 @@  static int inv_mpu6050_sensor_show(struct inv_mpu6050_state  *st, int reg,
 	return IIO_VAL_INT;
 }
 
+static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 int *val)
+{
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int result;
+	int ret = IIO_VAL_INT;
+
+	result = iio_device_claim_direct_mode(indio_dev);
+	if (result)
+		return result;
+	result = inv_mpu6050_set_power_itg(st, true);
+	if (result)
+		goto error_release;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		result = inv_mpu6050_switch_engine(st, true,
+				INV_MPU6050_BIT_PWR_GYRO_STBY);
+		if (result)
+			goto error_power_off;
+		ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
+					      chan->channel2, val);
+		result = inv_mpu6050_switch_engine(st, false,
+				INV_MPU6050_BIT_PWR_GYRO_STBY);
+		if (result)
+			goto error_power_off;
+		break;
+	case IIO_ACCEL:
+		result = inv_mpu6050_switch_engine(st, true,
+				INV_MPU6050_BIT_PWR_ACCL_STBY);
+		if (result)
+			goto error_power_off;
+		ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
+					      chan->channel2, val);
+		result = inv_mpu6050_switch_engine(st, false,
+				INV_MPU6050_BIT_PWR_ACCL_STBY);
+		if (result)
+			goto error_power_off;
+		break;
+	case IIO_TEMP:
+		/* wait for stablization */
+		msleep(INV_MPU6050_SENSOR_UP_TIME);
+		ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
+					      IIO_MOD_X, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+error_power_off:
+	result |= inv_mpu6050_set_power_itg(st, false);
+error_release:
+	iio_device_release_direct_mode(indio_dev);
+	if (result)
+		return result;
+
+	return ret;
+}
+
 static int
 inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 		     struct iio_chan_spec const *chan,
@@ -342,63 +403,10 @@  inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-	{
-		int result;
-
-		ret = IIO_VAL_INT;
 		mutex_lock(&st->lock);
-		result = iio_device_claim_direct_mode(indio_dev);
-		if (result)
-			goto error_read_raw_unlock;
-		result = inv_mpu6050_set_power_itg(st, true);
-		if (result)
-			goto error_read_raw_release;
-		switch (chan->type) {
-		case IIO_ANGL_VEL:
-			result = inv_mpu6050_switch_engine(st, true,
-					INV_MPU6050_BIT_PWR_GYRO_STBY);
-			if (result)
-				goto error_read_raw_power_off;
-			ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
-						      chan->channel2, val);
-			result = inv_mpu6050_switch_engine(st, false,
-					INV_MPU6050_BIT_PWR_GYRO_STBY);
-			if (result)
-				goto error_read_raw_power_off;
-			break;
-		case IIO_ACCEL:
-			result = inv_mpu6050_switch_engine(st, true,
-					INV_MPU6050_BIT_PWR_ACCL_STBY);
-			if (result)
-				goto error_read_raw_power_off;
-			ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
-						      chan->channel2, val);
-			result = inv_mpu6050_switch_engine(st, false,
-					INV_MPU6050_BIT_PWR_ACCL_STBY);
-			if (result)
-				goto error_read_raw_power_off;
-			break;
-		case IIO_TEMP:
-			/* wait for stablization */
-			msleep(INV_MPU6050_SENSOR_UP_TIME);
-			ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
-						IIO_MOD_X, val);
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-		}
-error_read_raw_power_off:
-		result |= inv_mpu6050_set_power_itg(st, false);
-error_read_raw_release:
-		iio_device_release_direct_mode(indio_dev);
-error_read_raw_unlock:
+		ret = inv_mpu6050_read_channel_data(indio_dev, chan, val);
 		mutex_unlock(&st->lock);
-		if (result)
-			return result;
-
 		return ret;
-	}
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_ANGL_VEL: