@@ -21,6 +21,14 @@ Optional properties:
- dmas: Phandle to dma channel for the ADC.
- dma-names: Must be "rx" when dmas property is being used.
See ../../dma/dma.txt for details.
+ - #io-channel-cells: in case consumer drivers are attached, this must be 1.
+ See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
+
+Properties for consumer drivers:
+ - Consumer drivers can be connected to this producer device, as specified
+ in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
+ - Channels exposed are specified in:
+ <dt-bindings/iio/adc/at91-sama5d2_adc.txt>
Example:
@@ -38,4 +46,5 @@ adc: adc@fc030000 {
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
+ #io-channel-cells = <1>;
}
new file mode 100644
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for configuring the AT91 SAMA5D2 ADC
+ */
+
+#ifndef _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
+#define _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
+
+/* X relative position channel index */
+#define AT91_SAMA5D2_ADC_X_CHANNEL 24
+/* Y relative position channel index */
+#define AT91_SAMA5D2_ADC_Y_CHANNEL 25
+/* pressure channel index */
+#define AT91_SAMA5D2_ADC_P_CHANNEL 26
+
+#endif