@@ -908,6 +908,21 @@ config ROCKCHIP_SARADC
To compile this driver as a module, choose M here: the
module will be called rockchip_saradc.
+config RICHTEK_RTQ6056
+ tristate "Richtek RTQ6056 Current and Power Monitor ADC"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to enable RQT6056 ADC support.
+ RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+ compatible interface, and the device provides full information for
+ system by reading out the load current and power.
+
+ This driver can also be built as a module. If so, the module will be
+ called rtq6056.
+
config RZG2L_ADC
tristate "Renesas RZ/G2L ADC driver"
depends on ARCH_RZG2L || COMPILE_TEST
@@ -84,6 +84,7 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
+obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o
obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
new file mode 100644
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Richtek Technology Corp.
+ *
+ * ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define RTQ6056_REG_CONFIG 0x00
+#define RTQ6056_REG_SHUNTVOLT 0x01
+#define RTQ6056_REG_BUSVOLT 0x02
+#define RTQ6056_REG_POWER 0x03
+#define RTQ6056_REG_CURRENT 0x04
+#define RTQ6056_REG_CALIBRATION 0x05
+#define RTQ6056_REG_MASKENABLE 0x06
+#define RTQ6056_REG_ALERTLIMIT 0x07
+#define RTQ6056_REG_MANUFACTID 0xFE
+#define RTQ6056_REG_DIEID 0xFF
+
+#define RTQ6056_VENDOR_ID 0x1214
+#define RTQ6056_DEFAULT_CONFIG 0x4127
+#define RTQ6056_CONT_ALLON 7
+
+enum {
+ RTQ6056_CH_VSHUNT = 0,
+ RTQ6056_CH_VBUS,
+ RTQ6056_CH_POWER,
+ RTQ6056_CH_CURRENT,
+ RTQ6056_MAX_CHANNEL
+};
+
+enum {
+ F_OPMODE = 0,
+ F_VSHUNTCT,
+ F_VBUSCT,
+ F_AVG,
+ F_RESET,
+ F_MAX_FIELDS
+};
+
+struct rtq6056_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_field *rm_fields[F_MAX_FIELDS];
+ u32 shunt_resistor_uohm;
+ int vshuntct_us;
+ int vbusct_us;
+ int avg_sample;
+};
+
+static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = {
+ [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2),
+ [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5),
+ [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8),
+ [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11),
+ [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15),
+};
+
+static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .address = RTQ6056_REG_SHUNTVOLT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .address = RTQ6056_REG_BUSVOLT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_POWER,
+ .indexed = 1,
+ .channel = 2,
+ .address = RTQ6056_REG_POWER,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 2,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_CURRENT,
+ .indexed = 1,
+ .channel = 3,
+ .address = RTQ6056_REG_CURRENT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 3,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL),
+};
+
+static int rtq6056_adc_read_channel(struct rtq6056_priv *priv,
+ struct iio_chan_spec const *ch,
+ int *val)
+{
+ struct device *dev = priv->dev;
+ unsigned int addr = ch->address;
+ unsigned int regval;
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = regmap_read(priv->regmap, addr, ®val);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put(dev);
+ if (ret)
+ return ret;
+
+ /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */
+ if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER)
+ *val = regval;
+ else
+ *val = sign_extend32(regval, 16);
+
+ return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val,
+ int *val2)
+{
+ switch (ch->address) {
+ case RTQ6056_REG_SHUNTVOLT:
+ /* VSHUNT lsb 2.5uV */
+ *val = 2500;
+ *val2 = 1000000;
+ return IIO_VAL_FRACTIONAL;
+ case RTQ6056_REG_BUSVOLT:
+ /* VBUS lsb 1.25mV */
+ *val = 1250;
+ *val2 = 1000;
+ return IIO_VAL_FRACTIONAL;
+ case RTQ6056_REG_POWER:
+ /* Power lsb 25mW */
+ *val = 25;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Conversion time in uS for channel VSHUNT and VBUS. The indices correspond
+ * with the bit value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_conv_time_list[] = {
+ 139, 203, 269, 525, 1037, 2061, 4109, 8205,
+};
+
+static int rtq6056_adc_set_conv_time(struct rtq6056_priv *priv,
+ struct iio_chan_spec const *ch,
+ int val)
+{
+ struct regmap_field *rm_field;
+ unsigned int selector;
+ int *ct, ret;
+
+ if (val > 8205 || val < 139)
+ return -EINVAL;
+
+ if (ch->address == RTQ6056_REG_SHUNTVOLT) {
+ rm_field = priv->rm_fields[F_VSHUNTCT];
+ ct = &priv->vshuntct_us;
+ } else {
+ rm_field = priv->rm_fields[F_VBUSCT];
+ ct = &priv->vbusct_us;
+ }
+
+ selector = find_closest(val, rtq6056_conv_time_list,
+ ARRAY_SIZE(rtq6056_conv_time_list));
+
+ ret = regmap_field_write(rm_field, selector);
+ if (ret)
+ return ret;
+
+ *ct = rtq6056_conv_time_list[selector];
+
+ return 0;
+}
+
+/*
+ * Available averaging rate for rtq6056. The indices correspond with the bit
+ * value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_avg_sample_list[] = {
+ 1, 4, 16, 64, 128, 256, 512, 1024,
+};
+
+static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val)
+{
+ unsigned int selector;
+ int ret;
+
+ if (val > 1024 || val < 1)
+ return -EINVAL;
+
+ selector = find_closest(val, rtq6056_avg_sample_list,
+ ARRAY_SIZE(rtq6056_avg_sample_list));
+
+ ret = regmap_field_write(priv->rm_fields[F_AVG], selector);
+ if (ret)
+ return ret;
+
+ priv->avg_sample = rtq6056_avg_sample_list[selector];
+
+ return 0;
+}
+
+static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, int *val)
+{
+ int sample_time;
+
+ sample_time = priv->vshuntct_us + priv->vbusct_us;
+ sample_time *= priv->avg_sample;
+
+ *val = DIV_ROUND_UP(1000000, sample_time);
+
+ return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return rtq6056_adc_read_channel(priv, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+ return rtq6056_adc_read_scale(chan, val, val2);
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->address == RTQ6056_REG_SHUNTVOLT)
+ *val = priv->vshuntct_us;
+ else
+ *val = priv->vbusct_us;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = priv->avg_sample;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return rtq6056_adc_get_sample_freq(priv, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int rtq6056_adc_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ *vals = rtq6056_conv_time_list;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(rtq6056_conv_time_list);
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = rtq6056_avg_sample_list;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(rtq6056_avg_sample_list);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int rtq6056_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ ret = rtq6056_adc_set_conv_time(priv, chan, val);
+ break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = rtq6056_adc_set_average(priv, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = {
+ [RTQ6056_CH_VSHUNT] = "Vshunt",
+ [RTQ6056_CH_VBUS] = "Vbus",
+ [RTQ6056_CH_POWER] = "Power",
+ [RTQ6056_CH_CURRENT] = "Current",
+};
+
+static int rtq6056_adc_read_label(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ char *label)
+{
+ return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]);
+}
+
+static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv,
+ int resistor_uohm)
+{
+ unsigned int calib_val;
+ int ret;
+
+ if (resistor_uohm <= 0) {
+ dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm);
+ return -EINVAL;
+ }
+
+ /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */
+ calib_val = 5120000 / resistor_uohm;
+ ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val);
+ if (ret)
+ return ret;
+
+ priv->shunt_resistor_uohm = resistor_uohm;
+
+ return 0;
+}
+
+static ssize_t shunt_resistor_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ int vals[2] = { priv->shunt_resistor_uohm, 1000000 };
+
+ return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
+}
+
+static ssize_t shunt_resistor_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ int val, val_fract, ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
+ if (ret)
+ goto out_store;
+
+ ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract);
+
+out_store:
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret ?: len;
+}
+
+static IIO_DEVICE_ATTR_RW(shunt_resistor, 0);
+
+static struct attribute *rtq6056_attributes[] = {
+ &iio_dev_attr_shunt_resistor.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group rtq6056_attribute_group = {
+ .attrs = rtq6056_attributes,
+};
+
+static const struct iio_info rtq6056_info = {
+ .attrs = &rtq6056_attribute_group,
+ .read_raw = rtq6056_adc_read_raw,
+ .read_avail = rtq6056_adc_read_avail,
+ .write_raw = rtq6056_adc_write_raw,
+ .read_label = rtq6056_adc_read_label,
+};
+
+static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ struct device *dev = priv->dev;
+ struct {
+ u16 vals[RTQ6056_MAX_CHANNEL];
+ s64 timestamp __aligned(8);
+ } data;
+ unsigned int raw;
+ int i = 0, bit, ret;
+
+ memset(&data, 0, sizeof(data));
+
+ pm_runtime_get_sync(dev);
+
+ for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
+ unsigned int addr = rtq6056_channels[bit].address;
+
+ ret = regmap_read(priv->regmap, addr, &raw);
+ if (ret)
+ goto out;
+
+ data.vals[i++] = raw;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev));
+
+out:
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put(dev);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static void rtq6056_enter_shutdown_state(void *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+ /* Enter shutdown state */
+ regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT:
+ case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RTQ6056_REG_CONFIG:
+ case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config rtq6056_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = RTQ6056_REG_DIEID,
+ .readable_reg = rtq6056_is_readable_reg,
+ .writeable_reg = rtq6056_is_writeable_reg,
+};
+
+static int rtq6056_probe(struct i2c_client *i2c)
+{
+ struct iio_dev *indio_dev;
+ struct rtq6056_priv *priv;
+ struct device *dev = &i2c->dev;
+ struct regmap *regmap;
+ unsigned int vendor_id, shunt_resistor_uohm;
+ int ret;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+ priv->dev = dev;
+ priv->vshuntct_us = priv->vbusct_us = 1037;
+ priv->avg_sample = 1;
+ i2c_set_clientdata(i2c, priv);
+
+ regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to init regmap\n");
+
+ priv->regmap = regmap;
+
+ ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to get manufacturer info\n");
+
+ if (vendor_id != RTQ6056_VENDOR_ID)
+ return dev_err_probe(dev, -ENODEV,
+ "Invalid vendor id 0x%04x\n", vendor_id);
+
+ ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields,
+ rtq6056_reg_fields, F_MAX_FIELDS);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to init regmap field\n");
+
+ /*
+ * By default, configure average sample as 1, bus and shunt conversion
+ * time as 1037 microsecond, and operating mode to all on.
+ */
+ ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to enable continuous sensing\n");
+
+ ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_mark_last_busy(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n");
+
+ /* By default, use 2000 micro-Ohm resistor */
+ shunt_resistor_uohm = 2000;
+ device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+ &shunt_resistor_uohm);
+
+ ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to init shunt resistor\n");
+
+ indio_dev->name = "rtq6056";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = rtq6056_channels;
+ indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels);
+ indio_dev->info = &rtq6056_info;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+ rtq6056_buffer_trigger_handler,
+ NULL);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to allocate iio trigger buffer\n");
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static int rtq6056_runtime_suspend(struct device *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+ /* Configure to shutdown mode */
+ return regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static int rtq6056_runtime_resume(struct device *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+ int sample_rdy_time_us, ret;
+
+ ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON);
+ if (ret)
+ return ret;
+
+ sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us;
+ sample_rdy_time_us *= priv->avg_sample;
+
+ usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend,
+ rtq6056_runtime_resume, NULL);
+
+static const struct of_device_id rtq6056_device_match[] = {
+ { .compatible = "richtek,rtq6056" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rtq6056_device_match);
+
+static struct i2c_driver rtq6056_driver = {
+ .driver = {
+ .name = "rtq6056",
+ .of_match_table = rtq6056_device_match,
+ .pm = pm_ptr(&rtq6056_pm_ops),
+ },
+ .probe_new = rtq6056_probe,
+};
+module_i2c_driver(rtq6056_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RTQ6056 Driver");
+MODULE_LICENSE("GPL v2");