| Message ID | 20180126151941.12183-14-embed3d@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 01/26/18 09:19, Philipp Rossak wrote: > This patch adds the thermal zones to the H3. We have only one sensor and > that is placed in the cpu. > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> > --- > arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index fbb007e5798e..3f83f6a27c74 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -72,6 +72,15 @@ > }; > }; > > + thermal-zones { > + cpu-thermal { > + /* milliseconds */ > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&ths 0>; If #thermal-sensor-cells = <0>, shouldn't this just be <&ths> ? > + }; > + }; > + > timer { > compatible = "arm,armv7-timer"; > interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > Thanks, Samuel -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 26.01.2018 17:26, Samuel Holland wrote: > On 01/26/18 09:19, Philipp Rossak wrote: >> This patch adds the thermal zones to the H3. We have only one sensor and >> that is placed in the cpu. >> >> Signed-off-by: Philipp Rossak <embed3d@gmail.com> >> --- >> arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi >> index fbb007e5798e..3f83f6a27c74 100644 >> --- a/arch/arm/boot/dts/sun8i-h3.dtsi >> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi >> @@ -72,6 +72,15 @@ >> }; >> }; >> >> + thermal-zones { >> + cpu-thermal { >> + /* milliseconds */ >> + polling-delay-passive = <250>; >> + polling-delay = <1000>; >> + thermal-sensors = <&ths 0>; > > If #thermal-sensor-cells = <0>, shouldn't this just be <&ths> ? I think both works, but I my intention was to have an accurate description in DT. I thought that that is important in DT. >> + }; >> + }; >> + >> timer { >> compatible = "arm,armv7-timer"; >> interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> > > Thanks, > Samuel > Regards, Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fbb007e5798e..3f83f6a27c74 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -72,6 +72,15 @@ }; }; + thermal-zones { + cpu-thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
This patch adds the thermal zones to the H3. We have only one sensor and that is placed in the cpu. Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)