diff mbox series

[v2,4/4] iio: ti-ads8688: Migrate to device managed IIO calls

Message ID 20181211191207.21900-4-dmurphy@ti.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/4] iio: ti-ads124s08: Add DT binding documentation | expand

Commit Message

Dan Murphy Dec. 11, 2018, 7:12 p.m. UTC
Migrate the driver to use the devm IIO calls as opposed to
the unmanaged calls.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v2 - New patch

 drivers/iio/adc/ti-ads8688.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

Comments

Jonathan Cameron Dec. 16, 2018, 11:10 a.m. UTC | #1
On Tue, 11 Dec 2018 13:12:07 -0600
Dan Murphy <dmurphy@ti.com> wrote:

> Migrate the driver to use the devm IIO calls as opposed to
> the unmanaged calls.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
The remove order should always be the opposite of probe.
As devm cleanup is done 'after' whatever is in the remove function
you should never mix and match between managed and unmanaged.

That's not to say this can't be done, but it should also handle
the regulator disables.  For that
devm_add_action_or_reset is what you want.  As you need to check
the regulator is not an error, you would need a little utility function.

Jonathan
> ---
> 
> v2 - New patch
> 
>  drivers/iio/adc/ti-ads8688.c | 17 +++++++----------
>  1 file changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
> index 3597bc0697ee..8f42103a1fd9 100644
> --- a/drivers/iio/adc/ti-ads8688.c
> +++ b/drivers/iio/adc/ti-ads8688.c
> @@ -462,21 +462,21 @@ static int ads8688_probe(struct spi_device *spi)
>  
>  	mutex_init(&st->lock);
>  
> -	ret = iio_triggered_buffer_setup(indio_dev, NULL, ads8688_trigger_handler, NULL);
> +	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
> +					      ads8688_trigger_handler, NULL);
>  	if (ret < 0) {
>  		dev_err(&spi->dev, "iio triggered buffer setup failed\n");
>  		goto err_regulator_disable;
>  	}
>  
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto err_buffer_cleanup;
> +	ret = devm_iio_device_register(&spi->dev, indio_dev);
> +	if (ret < 0) {
> +		dev_err(&spi->dev, "iio device registration failed\n");
> +		goto err_regulator_disable;
> +	}
>  
>  	return 0;
>  
> -err_buffer_cleanup:
> -	iio_triggered_buffer_cleanup(indio_dev);
> -
>  err_regulator_disable:
>  	if (!IS_ERR(st->reg))
>  		regulator_disable(st->reg);
> @@ -489,9 +489,6 @@ static int ads8688_remove(struct spi_device *spi)
>  	struct iio_dev *indio_dev = spi_get_drvdata(spi);
>  	struct ads8688_state *st = iio_priv(indio_dev);
>  
> -	iio_device_unregister(indio_dev);
> -	iio_triggered_buffer_cleanup(indio_dev);
> -
>  	if (!IS_ERR(st->reg))
>  		regulator_disable(st->reg);
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
index 3597bc0697ee..8f42103a1fd9 100644
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -462,21 +462,21 @@  static int ads8688_probe(struct spi_device *spi)
 
 	mutex_init(&st->lock);
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL, ads8688_trigger_handler, NULL);
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+					      ads8688_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "iio triggered buffer setup failed\n");
 		goto err_regulator_disable;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto err_buffer_cleanup;
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret < 0) {
+		dev_err(&spi->dev, "iio device registration failed\n");
+		goto err_regulator_disable;
+	}
 
 	return 0;
 
-err_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-
 err_regulator_disable:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
@@ -489,9 +489,6 @@  static int ads8688_remove(struct spi_device *spi)
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 	struct ads8688_state *st = iio_priv(indio_dev);
 
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);