diff mbox series

[v3,2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors

Message ID 20181213144323.24820-3-andreas.brauchli@sensirion.com (mailing list archive)
State New, archived
Headers show
Series iio: chemical: sgp30: Support Sensirion Gas Sensors | expand

Commit Message

Andreas Brauchli Dec. 13, 2018, 2:43 p.m. UTC
Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors

Supported Features:

* Indoor Air Quality (IAQ) concentrations for
  - tVOC (in_concentration_voc_input)
  - CO2eq (in_concentration_co2_input) - SGP30 only

  IAQ concentrations are periodically read out by a background thread
  to allow the sensor to maintain its internal baseline.

* Gas concentration signals
  - Ethanol (in_concentration_ethanol_raw)
  - H2 (in_concentration_h2_raw) - SGP30 only

https://www.sensirion.com/file/datasheet_sgp30
https://www.sensirion.com/file/datasheet_sgpc3

Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
---
 drivers/iio/chemical/Kconfig  |  13 +
 drivers/iio/chemical/Makefile |   1 +
 drivers/iio/chemical/sgp30.c  | 603 ++++++++++++++++++++++++++++++++++
 3 files changed, 617 insertions(+)
 create mode 100644 drivers/iio/chemical/sgp30.c

Comments

Jonathan Cameron Dec. 16, 2018, 1:34 p.m. UTC | #1
On Thu, 13 Dec 2018 15:43:23 +0100
Andreas Brauchli <a.brauchli@elementarea.net> wrote:

> Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
> 
> Supported Features:
> 
> * Indoor Air Quality (IAQ) concentrations for
>   - tVOC (in_concentration_voc_input)
>   - CO2eq (in_concentration_co2_input) - SGP30 only
> 
>   IAQ concentrations are periodically read out by a background thread
>   to allow the sensor to maintain its internal baseline.
> 
> * Gas concentration signals
>   - Ethanol (in_concentration_ethanol_raw)
>   - H2 (in_concentration_h2_raw) - SGP30 only
> 
> https://www.sensirion.com/file/datasheet_sgp30
> https://www.sensirion.com/file/datasheet_sgpc3
> 
> Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>

Why do we provide endianness info given we don't provide the buffered
interface?  It's only used when we do.

Some over the top line wrapping as well.  However as that's it
I'll just clean up whilst applying.  If I've missed something odd
around the endian thing shout!

Jonathan

> ---
>  drivers/iio/chemical/Kconfig  |  13 +
>  drivers/iio/chemical/Makefile |   1 +
>  drivers/iio/chemical/sgp30.c  | 603 ++++++++++++++++++++++++++++++++++
>  3 files changed, 617 insertions(+)
>  create mode 100644 drivers/iio/chemical/sgp30.c
> 
> diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
> index b8e005be4f87..b0c912be94a9 100644
> --- a/drivers/iio/chemical/Kconfig
> +++ b/drivers/iio/chemical/Kconfig
> @@ -61,6 +61,19 @@ config IAQCORE
>  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
>  	  sensors
>  
> +config SENSIRION_SGP30
> +	tristate "Sensirion SGPxx gas sensors"
> +	depends on I2C
> +	select CRC8
> +	help
> +	  Say Y here to build I2C interface support for the following
> +	  Sensirion SGP gas sensors:
> +	    * SGP30 gas sensor
> +	    * SGPC3 low power gas sensor
> +
> +	  To compile this driver as module, choose M here: the
> +	  module will be called sgp30.
> +
>  config VZ89X
>  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
>  	depends on I2C
> diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
> index 2f4c4ba4d781..61e83944db1a 100644
> --- a/drivers/iio/chemical/Makefile
> +++ b/drivers/iio/chemical/Makefile
> @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
>  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
>  obj-$(CONFIG_CCS811)		+= ccs811.o
>  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
>  obj-$(CONFIG_VZ89X)		+= vz89x.o
> diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
> new file mode 100644
> index 000000000000..90eb4cbb18cf
> --- /dev/null
> +++ b/drivers/iio/chemical/sgp30.c
> @@ -0,0 +1,603 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * sgp30.c - Support for Sensirion SGP Gas Sensors
> + *
> + * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com>
> + *
> + * I2C slave address: 0x58
> + *
> + * Datasheets:
> + * https://www.sensirion.com/file/datasheet_sgp30
> + * https://www.sensirion.com/file/datasheet_sgpc3
> + *
> + * TODO:
> + * - baseline support
> + * - humidity compensation
> + * - power mode switching (SGPC3)
> + */
> +
> +#include <linux/crc8.h>
> +#include <linux/delay.h>
> +#include <linux/kthread.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/i2c.h>
> +#include <linux/of_device.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define SGP_WORD_LEN				2
> +#define SGP_CRC8_POLYNOMIAL			0x31
> +#define SGP_CRC8_INIT				0xff
> +#define SGP_CRC8_LEN				1
> +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
> +#define SGP_CMD_DURATION_US			12000
> +#define SGP_MEASUREMENT_DURATION_US		50000
> +#define SGP_CMD_LEN				SGP_WORD_LEN
> +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN + 2 * SGP_WORD_LEN)
> +#define SGP_MEASUREMENT_LEN			2
> +#define SGP30_MEASURE_INTERVAL_HZ		1
> +#define SGPC3_MEASURE_INTERVAL_HZ		2
> +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) & 0xf000) >> 12)
> +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) & 0x0800) >> 11)
> +#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
> +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) & 0x0100) >> 8)
> +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) & 0x00e0) >> 5)
> +#define SGP_VERS_MINOR(data)	(((data)->feature_set) & 0x001f)
> +
> +DECLARE_CRC8_TABLE(sgp_crc8_table);
> +
> +enum sgp_product_id {
> +	SGP30 = 0,
> +	SGPC3,
> +};
> +
> +enum sgp30_channel_idx {
> +	SGP30_IAQ_TVOC_IDX = 0,
> +	SGP30_IAQ_CO2EQ_IDX,
> +	SGP30_SIG_ETOH_IDX,
> +	SGP30_SIG_H2_IDX,
> +};
> +
> +enum sgpc3_channel_idx {
> +	SGPC3_IAQ_TVOC_IDX = 10,
> +	SGPC3_SIG_ETOH_IDX,
> +};
> +
> +enum sgp_cmd {
> +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> +	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
> +	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
> +
> +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> +
> +	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
> +};
> +
> +struct sgp_version {
> +	u8 major;
> +	u8 minor;
> +};
> +
> +struct sgp_crc_word {
> +	__be16 value;
> +	u8 crc8;
> +} __attribute__((__packed__));
> +
> +union sgp_reading {
> +	u8 start;
> +	struct sgp_crc_word raw_words[4];
> +};
> +
> +enum _iaq_buffer_state {
> +	IAQ_BUFFER_EMPTY = 0,
> +	IAQ_BUFFER_DEFAULT_VALS,
> +	IAQ_BUFFER_VALID,
> +};
> +
> +struct sgp_data {
> +	struct i2c_client *client;
> +	struct task_struct *iaq_thread;
> +	struct mutex data_lock;
> +	unsigned long iaq_init_start_jiffies;
> +	unsigned long iaq_defval_skip_jiffies;
> +	u16 product_id;
> +	u16 feature_set;
> +	unsigned long measure_interval_jiffies;
> +	enum sgp_cmd iaq_init_cmd;
> +	enum sgp_cmd measure_iaq_cmd;
> +	enum sgp_cmd measure_gas_signals_cmd;
> +	union sgp_reading buffer;
> +	union sgp_reading iaq_buffer;
> +	enum _iaq_buffer_state iaq_buffer_state;
> +};
> +
> +struct sgp_device {
> +	const struct iio_chan_spec *channels;
> +	int num_channels;
> +};
> +
> +static const struct sgp_version supported_versions_sgp30[] = {
> +	{
> +		.major = 1,
> +		.minor = 0,
> +	},
> +};
> +
> +static const struct sgp_version supported_versions_sgpc3[] = {
> +	{
> +		.major = 0,
> +		.minor = 4,
> +	},
> +};
> +
> +static const struct iio_chan_spec sgp30_channels[] = {
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_VOC,
> +		.modified = 1,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> +		.address = SGP30_IAQ_TVOC_IDX,
> +	},
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_CO2,
> +		.modified = 1,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> +		.address = SGP30_IAQ_CO2EQ_IDX,
> +	},
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_ETHANOL,
> +		.modified = 1,
> +		.info_mask_separate =
> +			BIT(IIO_CHAN_INFO_RAW),

Definitely looks like it'll fit in under 80 chars.

> +		.address = SGP30_SIG_ETOH_IDX,
> +		.scan_type = {
> +			.endianness = IIO_BE,
> +		},
> +	},
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_H2,
> +		.modified = 1,
> +		.info_mask_separate =
> +			BIT(IIO_CHAN_INFO_RAW),

Same here on length.

> +		.address = SGP30_SIG_H2_IDX,
> +		.scan_type = {
> +			.endianness = IIO_BE,
> +		},
> +	},
> +};
> +
> +static const struct iio_chan_spec sgpc3_channels[] = {
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_VOC,
> +		.modified = 1,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> +		.address = SGPC3_IAQ_TVOC_IDX,
> +	},
> +	{
> +		.type = IIO_CONCENTRATION,
> +		.channel2 = IIO_MOD_ETHANOL,
> +		.modified = 1,
> +		.info_mask_separate =
> +			BIT(IIO_CHAN_INFO_RAW),
And another on length.
> +		.address = SGPC3_SIG_ETOH_IDX,
> +		.scan_type = {
> +			.endianness = IIO_BE,
> +		},
> +	},
> +};
> +
> +static const struct sgp_device sgp_devices[] = {
> +	[SGP30] = {
> +		.channels = sgp30_channels,
> +		.num_channels = ARRAY_SIZE(sgp30_channels),
> +	},
> +	[SGPC3] = {
> +		.channels = sgpc3_channels,
> +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> +	},
> +};
> +
> +/**
> + * sgp_verify_buffer() - verify the checksums of the data buffer words
> + *
> + * @data:       SGP data
> + * @buf:        Raw data buffer
> + * @word_count: Num data words stored in the buffer, excluding CRC bytes
> + *
> + * Return:      0 on success, negative error otherwise.
> + */
> +static int sgp_verify_buffer(const struct sgp_data *data,
> +			     union sgp_reading *buf, size_t word_count)
> +{
> +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> +	int i;
> +	u8 crc;
> +	u8 *data_buf = &buf->start;
> +
> +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
> +		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
> +			   SGP_CRC8_INIT);
> +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> +			dev_err(&data->client->dev, "CRC error\n");
> +			return -EIO;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * sgp_read_cmd() - reads data from sensor after issuing a command
> + * The caller must hold data->data_lock for the duration of the call.
> + * @data:        SGP data
> + * @cmd:         SGP Command to issue
> + * @buf:         Raw data buffer to use
> + * @word_count:  Num words to read, excluding CRC bytes
> + *
> + * Return:       0 on success, negative error otherwise.
> + */
> +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
> +			union sgp_reading *buf, size_t word_count,
> +			unsigned long duration_us)
> +{
> +	int ret;
> +	struct i2c_client *client = data->client;
> +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> +	u8 *data_buf;
> +
> +	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
> +	if (ret != SGP_CMD_LEN)
> +		return -EIO;
> +	usleep_range(duration_us, duration_us + 1000);
> +
> +	if (word_count == 0)
> +		return 0;
> +
> +	data_buf = &buf->start;
> +	ret = i2c_master_recv(client, data_buf, size);
> +	if (ret < 0)
> +		return ret;
> +	if (ret != size)
> +		return -EIO;
> +
> +	return sgp_verify_buffer(data, buf, word_count);
> +}
> +
> +/**
> + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
> + * The caller must hold data->data_lock for the duration of the call.
> + * @data:       SGP data
> + *
> + * Return:      0 on success, -EBUSY on default values, negative error
> + *              otherwise.
> + */
> +
> +static int sgp_measure_iaq(struct sgp_data *data)
> +{
> +	int ret;
> +	/* data contains default values */
> +	bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies +
> +						 data->iaq_defval_skip_jiffies);
> +
> +	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer,
> +			   SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> +
> +	if (default_vals)
> +		return -EBUSY;
> +
> +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> +
> +	return 0;
> +}
> +
> +static void sgp_iaq_thread_sleep_until(const struct sgp_data *data,
> +				       unsigned long sleep_jiffies)
> +{
> +	const long IAQ_POLL = 50000;
> +
> +	while (!time_after(jiffies, sleep_jiffies)) {
> +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> +		if (kthread_should_stop() || data->iaq_init_start_jiffies == 0)
> +			return;
> +	}
> +}
> +
> +static int sgp_iaq_threadfn(void *p)
> +{
> +	struct sgp_data *data = (struct sgp_data *)p;
> +	unsigned long next_update_jiffies;
> +	int ret;
> +
> +	while (!kthread_should_stop()) {
> +		mutex_lock(&data->data_lock);
> +		if (data->iaq_init_start_jiffies == 0) {
> +			ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0,
> +					   SGP_CMD_DURATION_US);
> +			if (ret < 0)
> +				goto unlock_sleep_continue;
> +			data->iaq_init_start_jiffies = jiffies;
> +		}
> +
> +		ret = sgp_measure_iaq(data);
> +		if (ret && ret != -EBUSY) {
> +			dev_warn(&data->client->dev,
> +				 "IAQ measurement error [%d]\n", ret);
> +		}
> +unlock_sleep_continue:
> +		next_update_jiffies = jiffies + data->measure_interval_jiffies;
> +		mutex_unlock(&data->data_lock);
> +		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
> +	}
> +
> +	return 0;
> +}
> +
> +static int sgp_read_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan, int *val,
> +			int *val2, long mask)
> +{
> +	struct sgp_data *data = iio_priv(indio_dev);
> +	struct sgp_crc_word *words;
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_PROCESSED:
> +		mutex_lock(&data->data_lock);
> +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
> +			mutex_unlock(&data->data_lock);
> +			return -EBUSY;
> +		}
> +		words = data->iaq_buffer.raw_words;
> +		switch (chan->address) {
> +		case SGP30_IAQ_TVOC_IDX:
> +		case SGPC3_IAQ_TVOC_IDX:
> +			*val = 0;
> +			*val2 = be16_to_cpu(words[1].value);
> +			ret = IIO_VAL_INT_PLUS_NANO;
> +			break;
> +		case SGP30_IAQ_CO2EQ_IDX:
> +			*val = 0;
> +			*val2 = be16_to_cpu(words[0].value);
> +			ret = IIO_VAL_INT_PLUS_MICRO;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +			break;
> +		}
> +		mutex_unlock(&data->data_lock);
> +		break;
> +	case IIO_CHAN_INFO_RAW:
> +		mutex_lock(&data->data_lock);
> +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> +			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
> +				ret = -EBUSY;
> +			else
> +				ret = 0;
> +			words = data->iaq_buffer.raw_words;
> +		} else {
> +			ret = sgp_read_cmd(data, data->measure_gas_signals_cmd,
> +					   &data->buffer, SGP_MEASUREMENT_LEN,
> +					   SGP_MEASUREMENT_DURATION_US);
> +			words = data->buffer.raw_words;
> +		}
> +		if (ret) {
> +			mutex_unlock(&data->data_lock);
> +			return ret;
> +		}
> +
> +		switch (chan->address) {
> +		case SGP30_SIG_ETOH_IDX:
> +			*val = be16_to_cpu(words[1].value);
> +			ret = IIO_VAL_INT;
> +			break;
> +		case SGPC3_SIG_ETOH_IDX:
> +		case SGP30_SIG_H2_IDX:
> +			*val = be16_to_cpu(words[0].value);
> +			ret = IIO_VAL_INT;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +			break;
> +		}
> +		mutex_unlock(&data->data_lock);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static int sgp_check_compat(struct sgp_data *data,
> +			    unsigned int product_id)
> +{
> +	const struct sgp_version *supported_versions;
> +	u16 ix, num_fs;
> +	u16 product, generation, major, minor;
> +
> +	/* driver does not match product */
> +	generation = SGP_VERS_GEN(data);
> +	if (generation != 0) {
> +		dev_err(&data->client->dev,
> +			"incompatible product generation %d != 0", generation);
> +		return -ENODEV;
> +	}
> +
> +	product = SGP_VERS_PRODUCT(data);
> +	if (product != product_id) {
> +		dev_err(&data->client->dev,
> +			"sensor reports a different product: 0x%04hx\n",
> +			product);
> +		return -ENODEV;
> +	}
> +
> +	if (SGP_VERS_RESERVED(data))
> +		dev_warn(&data->client->dev, "reserved bit is set\n");
> +
> +	/* engineering samples are not supported: no interface guarantees */
> +	if (SGP_VERS_ENG_BIT(data))
> +		return -ENODEV;
> +
> +	switch (product) {
> +	case SGP30:
> +		supported_versions = supported_versions_sgp30;
> +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> +		break;
> +	case SGPC3:
> +		supported_versions = supported_versions_sgpc3;
> +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> +		break;
> +	default:
> +		return -ENODEV;
> +	}
> +
> +	major = SGP_VERS_MAJOR(data);
> +	minor = SGP_VERS_MINOR(data);
> +	for (ix = 0; ix < num_fs; ix++) {
> +		if (major == supported_versions[ix].major &&
> +		    minor >= supported_versions[ix].minor)
> +			return 0;
> +	}
> +	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
> +		major, minor);
> +
> +	return -ENODEV;
> +}
> +
> +static void sgp_init(struct sgp_data *data)
> +{
> +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> +	data->iaq_init_start_jiffies = 0;
> +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> +	switch (SGP_VERS_PRODUCT(data)) {
> +	case SGP30:
> +		data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ;
> +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> +		data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL;
> +		data->product_id = SGP30;
> +		data->iaq_defval_skip_jiffies = 15 * HZ;
> +		break;
> +	case SGPC3:
> +		data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ;
> +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> +		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
> +		data->product_id = SGPC3;
> +		data->iaq_defval_skip_jiffies =
> +			43 * data->measure_interval_jiffies;
> +		break;
> +	};
> +}
> +
> +static const struct iio_info sgp_info = {
> +	.read_raw	= sgp_read_raw,
> +};
> +
> +static const struct of_device_id sgp_dt_ids[] = {
> +	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
> +	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
> +	{ }
> +};
> +
> +static int sgp_probe(struct i2c_client *client,
> +		     const struct i2c_device_id *id)
> +{
> +	struct iio_dev *indio_dev;
> +	struct sgp_data *data;
> +	const struct of_device_id *of_id;
> +	unsigned long product_id;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> +	if (of_id)
> +		product_id = (unsigned long)of_id->data;
> +	else
> +		product_id = id->driver_data;
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->client = client;
> +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> +	mutex_init(&data->data_lock);
> +
> +	/* get feature set version and write it to client data */
> +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1,
> +			   SGP_CMD_DURATION_US);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value);
> +
> +	ret = sgp_check_compat(data, product_id);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->info = &sgp_info;
> +	indio_dev->name = id->name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = sgp_devices[product_id].channels;
> +	indio_dev->num_channels = sgp_devices[product_id].num_channels;
> +
> +	sgp_init(data);
> +
> +	ret = devm_iio_device_register(&client->dev, indio_dev);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to register iio device\n");
> +		return ret;
> +	}
> +
> +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> +				       "%s-iaq", data->client->name);
> +
> +	return 0;
> +}
> +
> +static int sgp_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct sgp_data *data = iio_priv(indio_dev);
> +
> +	if (data->iaq_thread)
> +		kthread_stop(data->iaq_thread);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id sgp_id[] = {
> +	{ "sgp30", SGP30 },
> +	{ "sgpc3", SGPC3 },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, sgp_id);
> +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> +
> +static struct i2c_driver sgp_driver = {
> +	.driver = {
> +		.name = "sgp30",
> +		.of_match_table = of_match_ptr(sgp_dt_ids),
> +	},
> +	.probe = sgp_probe,
> +	.remove = sgp_remove,
> +	.id_table = sgp_id,
> +};
> +module_i2c_driver(sgp_driver);
> +
> +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>");
> +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
> +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> +MODULE_LICENSE("GPL v2");
Andreas Brauchli Dec. 16, 2018, 4:38 p.m. UTC | #2
On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:
> On Thu, 13 Dec 2018 15:43:23 +0100
> Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> 
> > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
> > 
> > Supported Features:
> > 
> > * Indoor Air Quality (IAQ) concentrations for
> >   - tVOC (in_concentration_voc_input)
> >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > 
> >   IAQ concentrations are periodically read out by a background
> > thread
> >   to allow the sensor to maintain its internal baseline.
> > 
> > * Gas concentration signals
> >   - Ethanol (in_concentration_ethanol_raw)
> >   - H2 (in_concentration_h2_raw) - SGP30 only
> > 
> > https://www.sensirion.com/file/datasheet_sgp30
> > https://www.sensirion.com/file/datasheet_sgpc3
> > 
> > Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
> 
> Why do we provide endianness info given we don't provide the buffered
> interface?  It's only used when we do.

Makes sense but I wasn't aware of it. The initial submission came with
buffering, so it probably wasn't spotted in v2.

> 
> Some over the top line wrapping as well.  However as that's it
> I'll just clean up whilst applying.  If I've missed something odd
> around the endian thing shout!

No that's it, thanks a lot.

> 
> Jonathan
> 
> > ---
> >  drivers/iio/chemical/Kconfig  |  13 +
> >  drivers/iio/chemical/Makefile |   1 +
> >  drivers/iio/chemical/sgp30.c  | 603
> > ++++++++++++++++++++++++++++++++++
> >  3 files changed, 617 insertions(+)
> >  create mode 100644 drivers/iio/chemical/sgp30.c
> > 
> > diff --git a/drivers/iio/chemical/Kconfig
> > b/drivers/iio/chemical/Kconfig
> > index b8e005be4f87..b0c912be94a9 100644
> > --- a/drivers/iio/chemical/Kconfig
> > +++ b/drivers/iio/chemical/Kconfig
> > @@ -61,6 +61,19 @@ config IAQCORE
> >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
> >  	  sensors
> >  
> > +config SENSIRION_SGP30

I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
consistency's sake I'm fine with dropping the branding. Up to you.

> > +	tristate "Sensirion SGPxx gas sensors"
> > +	depends on I2C
> > +	select CRC8
> > +	help
> > +	  Say Y here to build I2C interface support for the following
> > +	  Sensirion SGP gas sensors:
> > +	    * SGP30 gas sensor
> > +	    * SGPC3 low power gas sensor
> > +
> > +	  To compile this driver as module, choose M here: the
> > +	  module will be called sgp30.
> > +
> >  config VZ89X
> >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> >  	depends on I2C
> > diff --git a/drivers/iio/chemical/Makefile
> > b/drivers/iio/chemical/Makefile
> > index 2f4c4ba4d781..61e83944db1a 100644
> > --- a/drivers/iio/chemical/Makefile
> > +++ b/drivers/iio/chemical/Makefile
> > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> >  obj-$(CONFIG_CCS811)		+= ccs811.o
> >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > diff --git a/drivers/iio/chemical/sgp30.c
> > b/drivers/iio/chemical/sgp30.c
> > new file mode 100644
> > index 000000000000..90eb4cbb18cf
> > --- /dev/null
> > +++ b/drivers/iio/chemical/sgp30.c
> > @@ -0,0 +1,603 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > + *
> > + * Copyright (C) 2018 Andreas Brauchli <
> > andreas.brauchli@sensirion.com>
> > + *
> > + * I2C slave address: 0x58
> > + *
> > + * Datasheets:
> > + * https://www.sensirion.com/file/datasheet_sgp30
> > + * https://www.sensirion.com/file/datasheet_sgpc3
> > + *
> > + * TODO:
> > + * - baseline support
> > + * - humidity compensation
> > + * - power mode switching (SGPC3)
> > + */
> > +
> > +#include <linux/crc8.h>
> > +#include <linux/delay.h>
> > +#include <linux/kthread.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/i2c.h>
> > +#include <linux/of_device.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> > +
> > +#define SGP_WORD_LEN				2
> > +#define SGP_CRC8_POLYNOMIAL			0x31
> > +#define SGP_CRC8_INIT				0xff
> > +#define SGP_CRC8_LEN				1
> > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
> > +#define SGP_CMD_DURATION_US			12000
> > +#define SGP_MEASUREMENT_DURATION_US		50000
> > +#define SGP_CMD_LEN				SGP_WORD_LEN
> > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN +
> > 2 * SGP_WORD_LEN)
> > +#define SGP_MEASUREMENT_LEN			2
> > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) &
> > 0xf000) >> 12)
> > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) &
> > 0x0800) >> 11)
> > +#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
> > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) &
> > 0x0100) >> 8)
> > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) &
> > 0x00e0) >> 5)
> > +#define SGP_VERS_MINOR(data)	(((data)->feature_set) &
> > 0x001f)
> > +
> > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > +
> > +enum sgp_product_id {
> > +	SGP30 = 0,
> > +	SGPC3,
> > +};
> > +
> > +enum sgp30_channel_idx {
> > +	SGP30_IAQ_TVOC_IDX = 0,
> > +	SGP30_IAQ_CO2EQ_IDX,
> > +	SGP30_SIG_ETOH_IDX,
> > +	SGP30_SIG_H2_IDX,
> > +};
> > +
> > +enum sgpc3_channel_idx {
> > +	SGPC3_IAQ_TVOC_IDX = 10,
> > +	SGPC3_SIG_ETOH_IDX,
> > +};
> > +
> > +enum sgp_cmd {
> > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > +	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
> > +	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
> > +
> > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > +
> > +	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
> > +};
> > +
> > +struct sgp_version {
> > +	u8 major;
> > +	u8 minor;
> > +};
> > +
> > +struct sgp_crc_word {
> > +	__be16 value;
> > +	u8 crc8;
> > +} __attribute__((__packed__));
> > +
> > +union sgp_reading {
> > +	u8 start;
> > +	struct sgp_crc_word raw_words[4];
> > +};
> > +
> > +enum _iaq_buffer_state {
> > +	IAQ_BUFFER_EMPTY = 0,
> > +	IAQ_BUFFER_DEFAULT_VALS,
> > +	IAQ_BUFFER_VALID,
> > +};
> > +
> > +struct sgp_data {
> > +	struct i2c_client *client;
> > +	struct task_struct *iaq_thread;
> > +	struct mutex data_lock;
> > +	unsigned long iaq_init_start_jiffies;
> > +	unsigned long iaq_defval_skip_jiffies;
> > +	u16 product_id;
> > +	u16 feature_set;
> > +	unsigned long measure_interval_jiffies;
> > +	enum sgp_cmd iaq_init_cmd;
> > +	enum sgp_cmd measure_iaq_cmd;
> > +	enum sgp_cmd measure_gas_signals_cmd;
> > +	union sgp_reading buffer;
> > +	union sgp_reading iaq_buffer;
> > +	enum _iaq_buffer_state iaq_buffer_state;
> > +};
> > +
> > +struct sgp_device {
> > +	const struct iio_chan_spec *channels;
> > +	int num_channels;
> > +};
> > +
> > +static const struct sgp_version supported_versions_sgp30[] = {
> > +	{
> > +		.major = 1,
> > +		.minor = 0,
> > +	},
> > +};
> > +
> > +static const struct sgp_version supported_versions_sgpc3[] = {
> > +	{
> > +		.major = 0,
> > +		.minor = 4,
> > +	},
> > +};
> > +
> > +static const struct iio_chan_spec sgp30_channels[] = {
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_VOC,
> > +		.modified = 1,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > +		.address = SGP30_IAQ_TVOC_IDX,
> > +	},
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_CO2,
> > +		.modified = 1,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > +	},
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_ETHANOL,
> > +		.modified = 1,
> > +		.info_mask_separate =
> > +			BIT(IIO_CHAN_INFO_RAW),
> 
> Definitely looks like it'll fit in under 80 chars.
> 
> > +		.address = SGP30_SIG_ETOH_IDX,
> > +		.scan_type = {
> > +			.endianness = IIO_BE,
> > +		},
> > +	},
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_H2,
> > +		.modified = 1,
> > +		.info_mask_separate =
> > +			BIT(IIO_CHAN_INFO_RAW),
> 
> Same here on length.
> 
> > +		.address = SGP30_SIG_H2_IDX,
> > +		.scan_type = {
> > +			.endianness = IIO_BE,
> > +		},
> > +	},
> > +};
> > +
> > +static const struct iio_chan_spec sgpc3_channels[] = {
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_VOC,
> > +		.modified = 1,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > +		.address = SGPC3_IAQ_TVOC_IDX,
> > +	},
> > +	{
> > +		.type = IIO_CONCENTRATION,
> > +		.channel2 = IIO_MOD_ETHANOL,
> > +		.modified = 1,
> > +		.info_mask_separate =
> > +			BIT(IIO_CHAN_INFO_RAW),
> 
> And another on length.
> > +		.address = SGPC3_SIG_ETOH_IDX,
> > +		.scan_type = {
> > +			.endianness = IIO_BE,
> > +		},
> > +	},
> > +};
> > +
> > +static const struct sgp_device sgp_devices[] = {
> > +	[SGP30] = {
> > +		.channels = sgp30_channels,
> > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > +	},
> > +	[SGPC3] = {
> > +		.channels = sgpc3_channels,
> > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > +	},
> > +};
> > +
> > +/**
> > + * sgp_verify_buffer() - verify the checksums of the data buffer
> > words
> > + *
> > + * @data:       SGP data
> > + * @buf:        Raw data buffer
> > + * @word_count: Num data words stored in the buffer, excluding CRC
> > bytes
> > + *
> > + * Return:      0 on success, negative error otherwise.
> > + */
> > +static int sgp_verify_buffer(const struct sgp_data *data,
> > +			     union sgp_reading *buf, size_t word_count)
> > +{
> > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > +	int i;
> > +	u8 crc;
> > +	u8 *data_buf = &buf->start;
> > +
> > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
> > +		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
> > +			   SGP_CRC8_INIT);
> > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > +			dev_err(&data->client->dev, "CRC error\n");
> > +			return -EIO;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/**
> > + * sgp_read_cmd() - reads data from sensor after issuing a command
> > + * The caller must hold data->data_lock for the duration of the
> > call.
> > + * @data:        SGP data
> > + * @cmd:         SGP Command to issue
> > + * @buf:         Raw data buffer to use
> > + * @word_count:  Num words to read, excluding CRC bytes
> > + *
> > + * Return:       0 on success, negative error otherwise.
> > + */
> > +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
> > +			union sgp_reading *buf, size_t word_count,
> > +			unsigned long duration_us)
> > +{
> > +	int ret;
> > +	struct i2c_client *client = data->client;
> > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > +	u8 *data_buf;
> > +
> > +	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
> > +	if (ret != SGP_CMD_LEN)
> > +		return -EIO;
> > +	usleep_range(duration_us, duration_us + 1000);
> > +
> > +	if (word_count == 0)
> > +		return 0;
> > +
> > +	data_buf = &buf->start;
> > +	ret = i2c_master_recv(client, data_buf, size);
> > +	if (ret < 0)
> > +		return ret;
> > +	if (ret != size)
> > +		return -EIO;
> > +
> > +	return sgp_verify_buffer(data, buf, word_count);
> > +}
> > +
> > +/**
> > + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
> > + * The caller must hold data->data_lock for the duration of the
> > call.
> > + * @data:       SGP data
> > + *
> > + * Return:      0 on success, -EBUSY on default values, negative
> > error
> > + *              otherwise.
> > + */
> > +
> > +static int sgp_measure_iaq(struct sgp_data *data)
> > +{
> > +	int ret;
> > +	/* data contains default values */
> > +	bool default_vals = !time_after(jiffies, data-
> > >iaq_init_start_jiffies +
> > +						 data-
> > >iaq_defval_skip_jiffies);
> > +
> > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data-
> > >iaq_buffer,
> > +			   SGP_MEASUREMENT_LEN,
> > SGP_MEASUREMENT_DURATION_US);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > +
> > +	if (default_vals)
> > +		return -EBUSY;
> > +
> > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > +
> > +	return 0;
> > +}
> > +
> > +static void sgp_iaq_thread_sleep_until(const struct sgp_data
> > *data,
> > +				       unsigned long sleep_jiffies)
> > +{
> > +	const long IAQ_POLL = 50000;
> > +
> > +	while (!time_after(jiffies, sleep_jiffies)) {
> > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > +		if (kthread_should_stop() || data-
> > >iaq_init_start_jiffies == 0)
> > +			return;
> > +	}
> > +}
> > +
> > +static int sgp_iaq_threadfn(void *p)
> > +{
> > +	struct sgp_data *data = (struct sgp_data *)p;
> > +	unsigned long next_update_jiffies;
> > +	int ret;
> > +
> > +	while (!kthread_should_stop()) {
> > +		mutex_lock(&data->data_lock);
> > +		if (data->iaq_init_start_jiffies == 0) {
> > +			ret = sgp_read_cmd(data, data->iaq_init_cmd,
> > NULL, 0,
> > +					   SGP_CMD_DURATION_US);
> > +			if (ret < 0)
> > +				goto unlock_sleep_continue;
> > +			data->iaq_init_start_jiffies = jiffies;
> > +		}
> > +
> > +		ret = sgp_measure_iaq(data);
> > +		if (ret && ret != -EBUSY) {
> > +			dev_warn(&data->client->dev,
> > +				 "IAQ measurement error [%d]\n", ret);
> > +		}
> > +unlock_sleep_continue:
> > +		next_update_jiffies = jiffies + data-
> > >measure_interval_jiffies;
> > +		mutex_unlock(&data->data_lock);
> > +		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > +			struct iio_chan_spec const *chan, int *val,
> > +			int *val2, long mask)
> > +{
> > +	struct sgp_data *data = iio_priv(indio_dev);
> > +	struct sgp_crc_word *words;
> > +	int ret;
> > +
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_PROCESSED:
> > +		mutex_lock(&data->data_lock);
> > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
> > +			mutex_unlock(&data->data_lock);
> > +			return -EBUSY;
> > +		}
> > +		words = data->iaq_buffer.raw_words;
> > +		switch (chan->address) {
> > +		case SGP30_IAQ_TVOC_IDX:
> > +		case SGPC3_IAQ_TVOC_IDX:
> > +			*val = 0;
> > +			*val2 = be16_to_cpu(words[1].value);
> > +			ret = IIO_VAL_INT_PLUS_NANO;
> > +			break;
> > +		case SGP30_IAQ_CO2EQ_IDX:
> > +			*val = 0;
> > +			*val2 = be16_to_cpu(words[0].value);
> > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > +			break;
> > +		default:
> > +			ret = -EINVAL;
> > +			break;
> > +		}
> > +		mutex_unlock(&data->data_lock);
> > +		break;
> > +	case IIO_CHAN_INFO_RAW:
> > +		mutex_lock(&data->data_lock);
> > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > +			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
> > +				ret = -EBUSY;
> > +			else
> > +				ret = 0;
> > +			words = data->iaq_buffer.raw_words;
> > +		} else {
> > +			ret = sgp_read_cmd(data, data-
> > >measure_gas_signals_cmd,
> > +					   &data->buffer,
> > SGP_MEASUREMENT_LEN,
> > +					   SGP_MEASUREMENT_DURATION_US)
> > ;
> > +			words = data->buffer.raw_words;
> > +		}
> > +		if (ret) {
> > +			mutex_unlock(&data->data_lock);
> > +			return ret;
> > +		}
> > +
> > +		switch (chan->address) {
> > +		case SGP30_SIG_ETOH_IDX:
> > +			*val = be16_to_cpu(words[1].value);
> > +			ret = IIO_VAL_INT;
> > +			break;
> > +		case SGPC3_SIG_ETOH_IDX:
> > +		case SGP30_SIG_H2_IDX:
> > +			*val = be16_to_cpu(words[0].value);
> > +			ret = IIO_VAL_INT;
> > +			break;
> > +		default:
> > +			ret = -EINVAL;
> > +			break;
> > +		}
> > +		mutex_unlock(&data->data_lock);
> > +		break;
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int sgp_check_compat(struct sgp_data *data,
> > +			    unsigned int product_id)
> > +{
> > +	const struct sgp_version *supported_versions;
> > +	u16 ix, num_fs;
> > +	u16 product, generation, major, minor;
> > +
> > +	/* driver does not match product */
> > +	generation = SGP_VERS_GEN(data);
> > +	if (generation != 0) {
> > +		dev_err(&data->client->dev,
> > +			"incompatible product generation %d != 0",
> > generation);
> > +		return -ENODEV;
> > +	}
> > +
> > +	product = SGP_VERS_PRODUCT(data);
> > +	if (product != product_id) {
> > +		dev_err(&data->client->dev,
> > +			"sensor reports a different product:
> > 0x%04hx\n",
> > +			product);
> > +		return -ENODEV;
> > +	}
> > +
> > +	if (SGP_VERS_RESERVED(data))
> > +		dev_warn(&data->client->dev, "reserved bit is set\n");
> > +
> > +	/* engineering samples are not supported: no interface
> > guarantees */
> > +	if (SGP_VERS_ENG_BIT(data))
> > +		return -ENODEV;
> > +
> > +	switch (product) {
> > +	case SGP30:
> > +		supported_versions = supported_versions_sgp30;
> > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > +		break;
> > +	case SGPC3:
> > +		supported_versions = supported_versions_sgpc3;
> > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > +		break;
> > +	default:
> > +		return -ENODEV;
> > +	}
> > +
> > +	major = SGP_VERS_MAJOR(data);
> > +	minor = SGP_VERS_MINOR(data);
> > +	for (ix = 0; ix < num_fs; ix++) {
> > +		if (major == supported_versions[ix].major &&
> > +		    minor >= supported_versions[ix].minor)
> > +			return 0;
> > +	}
> > +	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
> > +		major, minor);
> > +
> > +	return -ENODEV;
> > +}
> > +
> > +static void sgp_init(struct sgp_data *data)
> > +{
> > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > +	data->iaq_init_start_jiffies = 0;
> > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > +	switch (SGP_VERS_PRODUCT(data)) {
> > +	case SGP30:
> > +		data->measure_interval_jiffies =
> > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > +		data->measure_gas_signals_cmd =
> > SGP30_CMD_MEASURE_SIGNAL;
> > +		data->product_id = SGP30;
> > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > +		break;
> > +	case SGPC3:
> > +		data->measure_interval_jiffies =
> > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > +		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
> > +		data->product_id = SGPC3;
> > +		data->iaq_defval_skip_jiffies =
> > +			43 * data->measure_interval_jiffies;
> > +		break;
> > +	};
> > +}
> > +
> > +static const struct iio_info sgp_info = {
> > +	.read_raw	= sgp_read_raw,
> > +};
> > +
> > +static const struct of_device_id sgp_dt_ids[] = {
> > +	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
> > +	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
> > +	{ }
> > +};
> > +
> > +static int sgp_probe(struct i2c_client *client,
> > +		     const struct i2c_device_id *id)
> > +{
> > +	struct iio_dev *indio_dev;
> > +	struct sgp_data *data;
> > +	const struct of_device_id *of_id;
> > +	unsigned long product_id;
> > +	int ret;
> > +
> > +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > +	if (!indio_dev)
> > +		return -ENOMEM;
> > +
> > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > +	if (of_id)
> > +		product_id = (unsigned long)of_id->data;
> > +	else
> > +		product_id = id->driver_data;
> > +
> > +	data = iio_priv(indio_dev);
> > +	i2c_set_clientdata(client, indio_dev);
> > +	data->client = client;
> > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > +	mutex_init(&data->data_lock);
> > +
> > +	/* get feature set version and write it to client data */
> > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data-
> > >buffer, 1,
> > +			   SGP_CMD_DURATION_US);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	data->feature_set = be16_to_cpu(data-
> > >buffer.raw_words[0].value);
> > +
> > +	ret = sgp_check_compat(data, product_id);
> > +	if (ret)
> > +		return ret;
> > +
> > +	indio_dev->dev.parent = &client->dev;
> > +	indio_dev->info = &sgp_info;
> > +	indio_dev->name = id->name;
> > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > +	indio_dev->channels = sgp_devices[product_id].channels;
> > +	indio_dev->num_channels = sgp_devices[product_id].num_channels;
> > +
> > +	sgp_init(data);
> > +
> > +	ret = devm_iio_device_register(&client->dev, indio_dev);
> > +	if (ret) {
> > +		dev_err(&client->dev, "failed to register iio
> > device\n");
> > +		return ret;
> > +	}
> > +
> > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > +				       "%s-iaq", data->client->name);
> > +
> > +	return 0;
> > +}
> > +
> > +static int sgp_remove(struct i2c_client *client)
> > +{
> > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > +	struct sgp_data *data = iio_priv(indio_dev);
> > +
> > +	if (data->iaq_thread)
> > +		kthread_stop(data->iaq_thread);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id sgp_id[] = {
> > +	{ "sgp30", SGP30 },
> > +	{ "sgpc3", SGPC3 },
> > +	{ }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > +
> > +static struct i2c_driver sgp_driver = {
> > +	.driver = {
> > +		.name = "sgp30",
> > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > +	},
> > +	.probe = sgp_probe,
> > +	.remove = sgp_remove,
> > +	.id_table = sgp_id,
> > +};
> > +module_i2c_driver(sgp_driver);
> > +
> > +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>")
> > ;
> > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
> > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > +MODULE_LICENSE("GPL v2");
> 
>
Jonathan Cameron Dec. 17, 2018, 11:59 a.m. UTC | #3
On Sun, 16 Dec 2018 17:38:18 +0100
Andreas Brauchli <a.brauchli@elementarea.net> wrote:

> On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:
> > On Thu, 13 Dec 2018 15:43:23 +0100
> > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> >   
> > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
> > > 
> > > Supported Features:
> > > 
> > > * Indoor Air Quality (IAQ) concentrations for
> > >   - tVOC (in_concentration_voc_input)
> > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > 
> > >   IAQ concentrations are periodically read out by a background
> > > thread
> > >   to allow the sensor to maintain its internal baseline.
> > > 
> > > * Gas concentration signals
> > >   - Ethanol (in_concentration_ethanol_raw)
> > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > 
> > > https://www.sensirion.com/file/datasheet_sgp30
> > > https://www.sensirion.com/file/datasheet_sgpc3
> > > 
> > > Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>  
> > 
> > Why do we provide endianness info given we don't provide the buffered
> > interface?  It's only used when we do.  
> 
> Makes sense but I wasn't aware of it. The initial submission came with
> buffering, so it probably wasn't spotted in v2.
> 
> > 
> > Some over the top line wrapping as well.  However as that's it
> > I'll just clean up whilst applying.  If I've missed something odd
> > around the endian thing shout!  
> 
> No that's it, thanks a lot.
> 
> > 
> > Jonathan
> >   
> > > ---
> > >  drivers/iio/chemical/Kconfig  |  13 +
> > >  drivers/iio/chemical/Makefile |   1 +
> > >  drivers/iio/chemical/sgp30.c  | 603
> > > ++++++++++++++++++++++++++++++++++
> > >  3 files changed, 617 insertions(+)
> > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > 
> > > diff --git a/drivers/iio/chemical/Kconfig
> > > b/drivers/iio/chemical/Kconfig
> > > index b8e005be4f87..b0c912be94a9 100644
> > > --- a/drivers/iio/chemical/Kconfig
> > > +++ b/drivers/iio/chemical/Kconfig
> > > @@ -61,6 +61,19 @@ config IAQCORE
> > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
> > >  	  sensors
> > >  
> > > +config SENSIRION_SGP30  
> 
> I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
> consistency's sake I'm fine with dropping the branding. Up to you.

We've never had any hard rules on this, at least partly because a lot
of drivers came from other subsystems in the early days.

We probably should have a rule though.  SGP30 for example is generic
enough that it might well be reused by someone else.

Anyone have any strong opinions on this?  If not I think I'll start
encouraging prefixing with manufacturer of first supported device.

Jonathan

> 
> > > +	tristate "Sensirion SGPxx gas sensors"
> > > +	depends on I2C
> > > +	select CRC8
> > > +	help
> > > +	  Say Y here to build I2C interface support for the following
> > > +	  Sensirion SGP gas sensors:
> > > +	    * SGP30 gas sensor
> > > +	    * SGPC3 low power gas sensor
> > > +
> > > +	  To compile this driver as module, choose M here: the
> > > +	  module will be called sgp30.
> > > +
> > >  config VZ89X
> > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > >  	depends on I2C
> > > diff --git a/drivers/iio/chemical/Makefile
> > > b/drivers/iio/chemical/Makefile
> > > index 2f4c4ba4d781..61e83944db1a 100644
> > > --- a/drivers/iio/chemical/Makefile
> > > +++ b/drivers/iio/chemical/Makefile
> > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > diff --git a/drivers/iio/chemical/sgp30.c
> > > b/drivers/iio/chemical/sgp30.c
> > > new file mode 100644
> > > index 000000000000..90eb4cbb18cf
> > > --- /dev/null
> > > +++ b/drivers/iio/chemical/sgp30.c
> > > @@ -0,0 +1,603 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > + *
> > > + * Copyright (C) 2018 Andreas Brauchli <  
> > > andreas.brauchli@sensirion.com>  
> > > + *
> > > + * I2C slave address: 0x58
> > > + *
> > > + * Datasheets:
> > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > + *
> > > + * TODO:
> > > + * - baseline support
> > > + * - humidity compensation
> > > + * - power mode switching (SGPC3)
> > > + */
> > > +
> > > +#include <linux/crc8.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/kthread.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mutex.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/iio/iio.h>
> > > +#include <linux/iio/sysfs.h>
> > > +
> > > +#define SGP_WORD_LEN				2
> > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > +#define SGP_CRC8_INIT				0xff
> > > +#define SGP_CRC8_LEN				1
> > > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
> > > +#define SGP_CMD_DURATION_US			12000
> > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > +#define SGP_CMD_LEN				SGP_WORD_LEN
> > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN +
> > > 2 * SGP_WORD_LEN)
> > > +#define SGP_MEASUREMENT_LEN			2
> > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) &
> > > 0xf000) >> 12)
> > > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) &
> > > 0x0800) >> 11)
> > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
> > > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) &
> > > 0x0100) >> 8)
> > > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) &
> > > 0x00e0) >> 5)
> > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set) &
> > > 0x001f)
> > > +
> > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > +
> > > +enum sgp_product_id {
> > > +	SGP30 = 0,
> > > +	SGPC3,
> > > +};
> > > +
> > > +enum sgp30_channel_idx {
> > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > +	SGP30_IAQ_CO2EQ_IDX,
> > > +	SGP30_SIG_ETOH_IDX,
> > > +	SGP30_SIG_H2_IDX,
> > > +};
> > > +
> > > +enum sgpc3_channel_idx {
> > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > +	SGPC3_SIG_ETOH_IDX,
> > > +};
> > > +
> > > +enum sgp_cmd {
> > > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > > +	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
> > > +	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
> > > +
> > > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > > +
> > > +	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
> > > +};
> > > +
> > > +struct sgp_version {
> > > +	u8 major;
> > > +	u8 minor;
> > > +};
> > > +
> > > +struct sgp_crc_word {
> > > +	__be16 value;
> > > +	u8 crc8;
> > > +} __attribute__((__packed__));
> > > +
> > > +union sgp_reading {
> > > +	u8 start;
> > > +	struct sgp_crc_word raw_words[4];
> > > +};
> > > +
> > > +enum _iaq_buffer_state {
> > > +	IAQ_BUFFER_EMPTY = 0,
> > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > +	IAQ_BUFFER_VALID,
> > > +};
> > > +
> > > +struct sgp_data {
> > > +	struct i2c_client *client;
> > > +	struct task_struct *iaq_thread;
> > > +	struct mutex data_lock;
> > > +	unsigned long iaq_init_start_jiffies;
> > > +	unsigned long iaq_defval_skip_jiffies;
> > > +	u16 product_id;
> > > +	u16 feature_set;
> > > +	unsigned long measure_interval_jiffies;
> > > +	enum sgp_cmd iaq_init_cmd;
> > > +	enum sgp_cmd measure_iaq_cmd;
> > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > +	union sgp_reading buffer;
> > > +	union sgp_reading iaq_buffer;
> > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > +};
> > > +
> > > +struct sgp_device {
> > > +	const struct iio_chan_spec *channels;
> > > +	int num_channels;
> > > +};
> > > +
> > > +static const struct sgp_version supported_versions_sgp30[] = {
> > > +	{
> > > +		.major = 1,
> > > +		.minor = 0,
> > > +	},
> > > +};
> > > +
> > > +static const struct sgp_version supported_versions_sgpc3[] = {
> > > +	{
> > > +		.major = 0,
> > > +		.minor = 4,
> > > +	},
> > > +};
> > > +
> > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_VOC,
> > > +		.modified = 1,
> > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > +	},
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_CO2,
> > > +		.modified = 1,
> > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > +	},
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_ETHANOL,
> > > +		.modified = 1,
> > > +		.info_mask_separate =
> > > +			BIT(IIO_CHAN_INFO_RAW),  
> > 
> > Definitely looks like it'll fit in under 80 chars.
> >   
> > > +		.address = SGP30_SIG_ETOH_IDX,
> > > +		.scan_type = {
> > > +			.endianness = IIO_BE,
> > > +		},
> > > +	},
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_H2,
> > > +		.modified = 1,
> > > +		.info_mask_separate =
> > > +			BIT(IIO_CHAN_INFO_RAW),  
> > 
> > Same here on length.
> >   
> > > +		.address = SGP30_SIG_H2_IDX,
> > > +		.scan_type = {
> > > +			.endianness = IIO_BE,
> > > +		},
> > > +	},
> > > +};
> > > +
> > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_VOC,
> > > +		.modified = 1,
> > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > +	},
> > > +	{
> > > +		.type = IIO_CONCENTRATION,
> > > +		.channel2 = IIO_MOD_ETHANOL,
> > > +		.modified = 1,
> > > +		.info_mask_separate =
> > > +			BIT(IIO_CHAN_INFO_RAW),  
> > 
> > And another on length.  
> > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > +		.scan_type = {
> > > +			.endianness = IIO_BE,
> > > +		},
> > > +	},
> > > +};
> > > +
> > > +static const struct sgp_device sgp_devices[] = {
> > > +	[SGP30] = {
> > > +		.channels = sgp30_channels,
> > > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > > +	},
> > > +	[SGPC3] = {
> > > +		.channels = sgpc3_channels,
> > > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > > +	},
> > > +};
> > > +
> > > +/**
> > > + * sgp_verify_buffer() - verify the checksums of the data buffer
> > > words
> > > + *
> > > + * @data:       SGP data
> > > + * @buf:        Raw data buffer
> > > + * @word_count: Num data words stored in the buffer, excluding CRC
> > > bytes
> > > + *
> > > + * Return:      0 on success, negative error otherwise.
> > > + */
> > > +static int sgp_verify_buffer(const struct sgp_data *data,
> > > +			     union sgp_reading *buf, size_t word_count)
> > > +{
> > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > +	int i;
> > > +	u8 crc;
> > > +	u8 *data_buf = &buf->start;
> > > +
> > > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
> > > +		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
> > > +			   SGP_CRC8_INIT);
> > > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > > +			dev_err(&data->client->dev, "CRC error\n");
> > > +			return -EIO;
> > > +		}
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +/**
> > > + * sgp_read_cmd() - reads data from sensor after issuing a command
> > > + * The caller must hold data->data_lock for the duration of the
> > > call.
> > > + * @data:        SGP data
> > > + * @cmd:         SGP Command to issue
> > > + * @buf:         Raw data buffer to use
> > > + * @word_count:  Num words to read, excluding CRC bytes
> > > + *
> > > + * Return:       0 on success, negative error otherwise.
> > > + */
> > > +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
> > > +			union sgp_reading *buf, size_t word_count,
> > > +			unsigned long duration_us)
> > > +{
> > > +	int ret;
> > > +	struct i2c_client *client = data->client;
> > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > +	u8 *data_buf;
> > > +
> > > +	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
> > > +	if (ret != SGP_CMD_LEN)
> > > +		return -EIO;
> > > +	usleep_range(duration_us, duration_us + 1000);
> > > +
> > > +	if (word_count == 0)
> > > +		return 0;
> > > +
> > > +	data_buf = &buf->start;
> > > +	ret = i2c_master_recv(client, data_buf, size);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +	if (ret != size)
> > > +		return -EIO;
> > > +
> > > +	return sgp_verify_buffer(data, buf, word_count);
> > > +}
> > > +
> > > +/**
> > > + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
> > > + * The caller must hold data->data_lock for the duration of the
> > > call.
> > > + * @data:       SGP data
> > > + *
> > > + * Return:      0 on success, -EBUSY on default values, negative
> > > error
> > > + *              otherwise.
> > > + */
> > > +
> > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > +{
> > > +	int ret;
> > > +	/* data contains default values */
> > > +	bool default_vals = !time_after(jiffies, data-  
> > > >iaq_init_start_jiffies +  
> > > +						 data-  
> > > >iaq_defval_skip_jiffies);  
> > > +
> > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data-  
> > > >iaq_buffer,  
> > > +			   SGP_MEASUREMENT_LEN,
> > > SGP_MEASUREMENT_DURATION_US);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > > +
> > > +	if (default_vals)
> > > +		return -EBUSY;
> > > +
> > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static void sgp_iaq_thread_sleep_until(const struct sgp_data
> > > *data,
> > > +				       unsigned long sleep_jiffies)
> > > +{
> > > +	const long IAQ_POLL = 50000;
> > > +
> > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > > +		if (kthread_should_stop() || data-  
> > > >iaq_init_start_jiffies == 0)  
> > > +			return;
> > > +	}
> > > +}
> > > +
> > > +static int sgp_iaq_threadfn(void *p)
> > > +{
> > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > +	unsigned long next_update_jiffies;
> > > +	int ret;
> > > +
> > > +	while (!kthread_should_stop()) {
> > > +		mutex_lock(&data->data_lock);
> > > +		if (data->iaq_init_start_jiffies == 0) {
> > > +			ret = sgp_read_cmd(data, data->iaq_init_cmd,
> > > NULL, 0,
> > > +					   SGP_CMD_DURATION_US);
> > > +			if (ret < 0)
> > > +				goto unlock_sleep_continue;
> > > +			data->iaq_init_start_jiffies = jiffies;
> > > +		}
> > > +
> > > +		ret = sgp_measure_iaq(data);
> > > +		if (ret && ret != -EBUSY) {
> > > +			dev_warn(&data->client->dev,
> > > +				 "IAQ measurement error [%d]\n", ret);
> > > +		}
> > > +unlock_sleep_continue:
> > > +		next_update_jiffies = jiffies + data-  
> > > >measure_interval_jiffies;  
> > > +		mutex_unlock(&data->data_lock);
> > > +		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > +			struct iio_chan_spec const *chan, int *val,
> > > +			int *val2, long mask)
> > > +{
> > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > +	struct sgp_crc_word *words;
> > > +	int ret;
> > > +
> > > +	switch (mask) {
> > > +	case IIO_CHAN_INFO_PROCESSED:
> > > +		mutex_lock(&data->data_lock);
> > > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
> > > +			mutex_unlock(&data->data_lock);
> > > +			return -EBUSY;
> > > +		}
> > > +		words = data->iaq_buffer.raw_words;
> > > +		switch (chan->address) {
> > > +		case SGP30_IAQ_TVOC_IDX:
> > > +		case SGPC3_IAQ_TVOC_IDX:
> > > +			*val = 0;
> > > +			*val2 = be16_to_cpu(words[1].value);
> > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > +			break;
> > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > +			*val = 0;
> > > +			*val2 = be16_to_cpu(words[0].value);
> > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > +			break;
> > > +		default:
> > > +			ret = -EINVAL;
> > > +			break;
> > > +		}
> > > +		mutex_unlock(&data->data_lock);
> > > +		break;
> > > +	case IIO_CHAN_INFO_RAW:
> > > +		mutex_lock(&data->data_lock);
> > > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > > +			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
> > > +				ret = -EBUSY;
> > > +			else
> > > +				ret = 0;
> > > +			words = data->iaq_buffer.raw_words;
> > > +		} else {
> > > +			ret = sgp_read_cmd(data, data-  
> > > >measure_gas_signals_cmd,  
> > > +					   &data->buffer,
> > > SGP_MEASUREMENT_LEN,
> > > +					   SGP_MEASUREMENT_DURATION_US)
> > > ;
> > > +			words = data->buffer.raw_words;
> > > +		}
> > > +		if (ret) {
> > > +			mutex_unlock(&data->data_lock);
> > > +			return ret;
> > > +		}
> > > +
> > > +		switch (chan->address) {
> > > +		case SGP30_SIG_ETOH_IDX:
> > > +			*val = be16_to_cpu(words[1].value);
> > > +			ret = IIO_VAL_INT;
> > > +			break;
> > > +		case SGPC3_SIG_ETOH_IDX:
> > > +		case SGP30_SIG_H2_IDX:
> > > +			*val = be16_to_cpu(words[0].value);
> > > +			ret = IIO_VAL_INT;
> > > +			break;
> > > +		default:
> > > +			ret = -EINVAL;
> > > +			break;
> > > +		}
> > > +		mutex_unlock(&data->data_lock);
> > > +		break;
> > > +	default:
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int sgp_check_compat(struct sgp_data *data,
> > > +			    unsigned int product_id)
> > > +{
> > > +	const struct sgp_version *supported_versions;
> > > +	u16 ix, num_fs;
> > > +	u16 product, generation, major, minor;
> > > +
> > > +	/* driver does not match product */
> > > +	generation = SGP_VERS_GEN(data);
> > > +	if (generation != 0) {
> > > +		dev_err(&data->client->dev,
> > > +			"incompatible product generation %d != 0",
> > > generation);
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	product = SGP_VERS_PRODUCT(data);
> > > +	if (product != product_id) {
> > > +		dev_err(&data->client->dev,
> > > +			"sensor reports a different product:
> > > 0x%04hx\n",
> > > +			product);
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	if (SGP_VERS_RESERVED(data))
> > > +		dev_warn(&data->client->dev, "reserved bit is set\n");
> > > +
> > > +	/* engineering samples are not supported: no interface
> > > guarantees */
> > > +	if (SGP_VERS_ENG_BIT(data))
> > > +		return -ENODEV;
> > > +
> > > +	switch (product) {
> > > +	case SGP30:
> > > +		supported_versions = supported_versions_sgp30;
> > > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > > +		break;
> > > +	case SGPC3:
> > > +		supported_versions = supported_versions_sgpc3;
> > > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > > +		break;
> > > +	default:
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	major = SGP_VERS_MAJOR(data);
> > > +	minor = SGP_VERS_MINOR(data);
> > > +	for (ix = 0; ix < num_fs; ix++) {
> > > +		if (major == supported_versions[ix].major &&
> > > +		    minor >= supported_versions[ix].minor)
> > > +			return 0;
> > > +	}
> > > +	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
> > > +		major, minor);
> > > +
> > > +	return -ENODEV;
> > > +}
> > > +
> > > +static void sgp_init(struct sgp_data *data)
> > > +{
> > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > +	data->iaq_init_start_jiffies = 0;
> > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > +	case SGP30:
> > > +		data->measure_interval_jiffies =
> > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > > +		data->measure_gas_signals_cmd =
> > > SGP30_CMD_MEASURE_SIGNAL;
> > > +		data->product_id = SGP30;
> > > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > > +		break;
> > > +	case SGPC3:
> > > +		data->measure_interval_jiffies =
> > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > > +		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
> > > +		data->product_id = SGPC3;
> > > +		data->iaq_defval_skip_jiffies =
> > > +			43 * data->measure_interval_jiffies;
> > > +		break;
> > > +	};
> > > +}
> > > +
> > > +static const struct iio_info sgp_info = {
> > > +	.read_raw	= sgp_read_raw,
> > > +};
> > > +
> > > +static const struct of_device_id sgp_dt_ids[] = {
> > > +	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
> > > +	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
> > > +	{ }
> > > +};
> > > +
> > > +static int sgp_probe(struct i2c_client *client,
> > > +		     const struct i2c_device_id *id)
> > > +{
> > > +	struct iio_dev *indio_dev;
> > > +	struct sgp_data *data;
> > > +	const struct of_device_id *of_id;
> > > +	unsigned long product_id;
> > > +	int ret;
> > > +
> > > +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > > +	if (!indio_dev)
> > > +		return -ENOMEM;
> > > +
> > > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > > +	if (of_id)
> > > +		product_id = (unsigned long)of_id->data;
> > > +	else
> > > +		product_id = id->driver_data;
> > > +
> > > +	data = iio_priv(indio_dev);
> > > +	i2c_set_clientdata(client, indio_dev);
> > > +	data->client = client;
> > > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > > +	mutex_init(&data->data_lock);
> > > +
> > > +	/* get feature set version and write it to client data */
> > > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data-  
> > > >buffer, 1,  
> > > +			   SGP_CMD_DURATION_US);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	data->feature_set = be16_to_cpu(data-  
> > > >buffer.raw_words[0].value);  
> > > +
> > > +	ret = sgp_check_compat(data, product_id);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	indio_dev->dev.parent = &client->dev;
> > > +	indio_dev->info = &sgp_info;
> > > +	indio_dev->name = id->name;
> > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > +	indio_dev->channels = sgp_devices[product_id].channels;
> > > +	indio_dev->num_channels = sgp_devices[product_id].num_channels;
> > > +
> > > +	sgp_init(data);
> > > +
> > > +	ret = devm_iio_device_register(&client->dev, indio_dev);
> > > +	if (ret) {
> > > +		dev_err(&client->dev, "failed to register iio
> > > device\n");
> > > +		return ret;
> > > +	}
> > > +
> > > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > > +				       "%s-iaq", data->client->name);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int sgp_remove(struct i2c_client *client)
> > > +{
> > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > +
> > > +	if (data->iaq_thread)
> > > +		kthread_stop(data->iaq_thread);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct i2c_device_id sgp_id[] = {
> > > +	{ "sgp30", SGP30 },
> > > +	{ "sgpc3", SGPC3 },
> > > +	{ }
> > > +};
> > > +
> > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > +
> > > +static struct i2c_driver sgp_driver = {
> > > +	.driver = {
> > > +		.name = "sgp30",
> > > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > > +	},
> > > +	.probe = sgp_probe,
> > > +	.remove = sgp_remove,
> > > +	.id_table = sgp_id,
> > > +};
> > > +module_i2c_driver(sgp_driver);
> > > +
> > > +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>")
> > > ;
> > > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
> > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > +MODULE_LICENSE("GPL v2");  
> > 
> >   
>
Tomasz Duszynski Dec. 18, 2018, 5:44 p.m. UTC | #4
On Mon, Dec 17, 2018 at 11:59:36AM +0000, Jonathan Cameron wrote:
> On Sun, 16 Dec 2018 17:38:18 +0100
> Andreas Brauchli <a.brauchli@elementarea.net> wrote:
>
> > On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:
> > > On Thu, 13 Dec 2018 15:43:23 +0100
> > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > >
> > > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
> > > >
> > > > Supported Features:
> > > >
> > > > * Indoor Air Quality (IAQ) concentrations for
> > > >   - tVOC (in_concentration_voc_input)
> > > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > >
> > > >   IAQ concentrations are periodically read out by a background
> > > > thread
> > > >   to allow the sensor to maintain its internal baseline.
> > > >
> > > > * Gas concentration signals
> > > >   - Ethanol (in_concentration_ethanol_raw)
> > > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > >
> > > > https://www.sensirion.com/file/datasheet_sgp30
> > > > https://www.sensirion.com/file/datasheet_sgpc3
> > > >
> > > > Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
> > >
> > > Why do we provide endianness info given we don't provide the buffered
> > > interface?  It's only used when we do.
> >
> > Makes sense but I wasn't aware of it. The initial submission came with
> > buffering, so it probably wasn't spotted in v2.
> >
> > >
> > > Some over the top line wrapping as well.  However as that's it
> > > I'll just clean up whilst applying.  If I've missed something odd
> > > around the endian thing shout!
> >
> > No that's it, thanks a lot.
> >
> > >
> > > Jonathan
> > >
> > > > ---
> > > >  drivers/iio/chemical/Kconfig  |  13 +
> > > >  drivers/iio/chemical/Makefile |   1 +
> > > >  drivers/iio/chemical/sgp30.c  | 603
> > > > ++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 617 insertions(+)
> > > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > >
> > > > diff --git a/drivers/iio/chemical/Kconfig
> > > > b/drivers/iio/chemical/Kconfig
> > > > index b8e005be4f87..b0c912be94a9 100644
> > > > --- a/drivers/iio/chemical/Kconfig
> > > > +++ b/drivers/iio/chemical/Kconfig
> > > > @@ -61,6 +61,19 @@ config IAQCORE
> > > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
> > > >  	  sensors
> > > >
> > > > +config SENSIRION_SGP30
> >
> > I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
> > consistency's sake I'm fine with dropping the branding. Up to you.
>
> We've never had any hard rules on this, at least partly because a lot
> of drivers came from other subsystems in the early days.
>
> We probably should have a rule though.  SGP30 for example is generic
> enough that it might well be reused by someone else.
>

Wondering how likely is this? These days some popular sensors have their
clones. Interestingly enough, they are sold as genuine i.e
without vendor/sensor name changes. On the other hand there are very
same ICs manufactured by different companies but still with
different names.

> Anyone have any strong opinions on this?  If not I think I'll start
> encouraging prefixing with manufacturer of first supported device.
>

What about sticking to what we have now and adding prefix when we do
have naming collision? Just my 2 cents.

> Jonathan
>
> >
> > > > +	tristate "Sensirion SGPxx gas sensors"
> > > > +	depends on I2C
> > > > +	select CRC8
> > > > +	help
> > > > +	  Say Y here to build I2C interface support for the following
> > > > +	  Sensirion SGP gas sensors:
> > > > +	    * SGP30 gas sensor
> > > > +	    * SGPC3 low power gas sensor
> > > > +
> > > > +	  To compile this driver as module, choose M here: the
> > > > +	  module will be called sgp30.
> > > > +
> > > >  config VZ89X
> > > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > > >  	depends on I2C
> > > > diff --git a/drivers/iio/chemical/Makefile
> > > > b/drivers/iio/chemical/Makefile
> > > > index 2f4c4ba4d781..61e83944db1a 100644
> > > > --- a/drivers/iio/chemical/Makefile
> > > > +++ b/drivers/iio/chemical/Makefile
> > > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> > > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > > diff --git a/drivers/iio/chemical/sgp30.c
> > > > b/drivers/iio/chemical/sgp30.c
> > > > new file mode 100644
> > > > index 000000000000..90eb4cbb18cf
> > > > --- /dev/null
> > > > +++ b/drivers/iio/chemical/sgp30.c
> > > > @@ -0,0 +1,603 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > > + *
> > > > + * Copyright (C) 2018 Andreas Brauchli <
> > > > andreas.brauchli@sensirion.com>
> > > > + *
> > > > + * I2C slave address: 0x58
> > > > + *
> > > > + * Datasheets:
> > > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > > + *
> > > > + * TODO:
> > > > + * - baseline support
> > > > + * - humidity compensation
> > > > + * - power mode switching (SGPC3)
> > > > + */
> > > > +
> > > > +#include <linux/crc8.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/kthread.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/mutex.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/iio/iio.h>
> > > > +#include <linux/iio/sysfs.h>
> > > > +
> > > > +#define SGP_WORD_LEN				2
> > > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > > +#define SGP_CRC8_INIT				0xff
> > > > +#define SGP_CRC8_LEN				1
> > > > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
> > > > +#define SGP_CMD_DURATION_US			12000
> > > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > > +#define SGP_CMD_LEN				SGP_WORD_LEN
> > > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN +
> > > > 2 * SGP_WORD_LEN)
> > > > +#define SGP_MEASUREMENT_LEN			2
> > > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) &
> > > > 0xf000) >> 12)
> > > > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) &
> > > > 0x0800) >> 11)
> > > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
> > > > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) &
> > > > 0x0100) >> 8)
> > > > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) &
> > > > 0x00e0) >> 5)
> > > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set) &
> > > > 0x001f)
> > > > +
> > > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > > +
> > > > +enum sgp_product_id {
> > > > +	SGP30 = 0,
> > > > +	SGPC3,
> > > > +};
> > > > +
> > > > +enum sgp30_channel_idx {
> > > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > > +	SGP30_IAQ_CO2EQ_IDX,
> > > > +	SGP30_SIG_ETOH_IDX,
> > > > +	SGP30_SIG_H2_IDX,
> > > > +};
> > > > +
> > > > +enum sgpc3_channel_idx {
> > > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > > +	SGPC3_SIG_ETOH_IDX,
> > > > +};
> > > > +
> > > > +enum sgp_cmd {
> > > > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > > > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > > > +	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
> > > > +	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
> > > > +
> > > > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > > > +
> > > > +	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
> > > > +};
> > > > +
> > > > +struct sgp_version {
> > > > +	u8 major;
> > > > +	u8 minor;
> > > > +};
> > > > +
> > > > +struct sgp_crc_word {
> > > > +	__be16 value;
> > > > +	u8 crc8;
> > > > +} __attribute__((__packed__));
> > > > +
> > > > +union sgp_reading {
> > > > +	u8 start;
> > > > +	struct sgp_crc_word raw_words[4];
> > > > +};
> > > > +
> > > > +enum _iaq_buffer_state {
> > > > +	IAQ_BUFFER_EMPTY = 0,
> > > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > > +	IAQ_BUFFER_VALID,
> > > > +};
> > > > +
> > > > +struct sgp_data {
> > > > +	struct i2c_client *client;
> > > > +	struct task_struct *iaq_thread;
> > > > +	struct mutex data_lock;
> > > > +	unsigned long iaq_init_start_jiffies;
> > > > +	unsigned long iaq_defval_skip_jiffies;
> > > > +	u16 product_id;
> > > > +	u16 feature_set;
> > > > +	unsigned long measure_interval_jiffies;
> > > > +	enum sgp_cmd iaq_init_cmd;
> > > > +	enum sgp_cmd measure_iaq_cmd;
> > > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > > +	union sgp_reading buffer;
> > > > +	union sgp_reading iaq_buffer;
> > > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > > +};
> > > > +
> > > > +struct sgp_device {
> > > > +	const struct iio_chan_spec *channels;
> > > > +	int num_channels;
> > > > +};
> > > > +
> > > > +static const struct sgp_version supported_versions_sgp30[] = {
> > > > +	{
> > > > +		.major = 1,
> > > > +		.minor = 0,
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct sgp_version supported_versions_sgpc3[] = {
> > > > +	{
> > > > +		.major = 0,
> > > > +		.minor = 4,
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_VOC,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > > +	},
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_CO2,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > > +	},
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate =
> > > > +			BIT(IIO_CHAN_INFO_RAW),
> > >
> > > Definitely looks like it'll fit in under 80 chars.
> > >
> > > > +		.address = SGP30_SIG_ETOH_IDX,
> > > > +		.scan_type = {
> > > > +			.endianness = IIO_BE,
> > > > +		},
> > > > +	},
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_H2,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate =
> > > > +			BIT(IIO_CHAN_INFO_RAW),
> > >
> > > Same here on length.
> > >
> > > > +		.address = SGP30_SIG_H2_IDX,
> > > > +		.scan_type = {
> > > > +			.endianness = IIO_BE,
> > > > +		},
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_VOC,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > > +	},
> > > > +	{
> > > > +		.type = IIO_CONCENTRATION,
> > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > +		.modified = 1,
> > > > +		.info_mask_separate =
> > > > +			BIT(IIO_CHAN_INFO_RAW),
> > >
> > > And another on length.
> > > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > > +		.scan_type = {
> > > > +			.endianness = IIO_BE,
> > > > +		},
> > > > +	},
> > > > +};
> > > > +
> > > > +static const struct sgp_device sgp_devices[] = {
> > > > +	[SGP30] = {
> > > > +		.channels = sgp30_channels,
> > > > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > > > +	},
> > > > +	[SGPC3] = {
> > > > +		.channels = sgpc3_channels,
> > > > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > > > +	},
> > > > +};
> > > > +
> > > > +/**
> > > > + * sgp_verify_buffer() - verify the checksums of the data buffer
> > > > words
> > > > + *
> > > > + * @data:       SGP data
> > > > + * @buf:        Raw data buffer
> > > > + * @word_count: Num data words stored in the buffer, excluding CRC
> > > > bytes
> > > > + *
> > > > + * Return:      0 on success, negative error otherwise.
> > > > + */
> > > > +static int sgp_verify_buffer(const struct sgp_data *data,
> > > > +			     union sgp_reading *buf, size_t word_count)
> > > > +{
> > > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > > +	int i;
> > > > +	u8 crc;
> > > > +	u8 *data_buf = &buf->start;
> > > > +
> > > > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
> > > > +		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
> > > > +			   SGP_CRC8_INIT);
> > > > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > > > +			dev_err(&data->client->dev, "CRC error\n");
> > > > +			return -EIO;
> > > > +		}
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +/**
> > > > + * sgp_read_cmd() - reads data from sensor after issuing a command
> > > > + * The caller must hold data->data_lock for the duration of the
> > > > call.
> > > > + * @data:        SGP data
> > > > + * @cmd:         SGP Command to issue
> > > > + * @buf:         Raw data buffer to use
> > > > + * @word_count:  Num words to read, excluding CRC bytes
> > > > + *
> > > > + * Return:       0 on success, negative error otherwise.
> > > > + */
> > > > +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
> > > > +			union sgp_reading *buf, size_t word_count,
> > > > +			unsigned long duration_us)
> > > > +{
> > > > +	int ret;
> > > > +	struct i2c_client *client = data->client;
> > > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > > +	u8 *data_buf;
> > > > +
> > > > +	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
> > > > +	if (ret != SGP_CMD_LEN)
> > > > +		return -EIO;
> > > > +	usleep_range(duration_us, duration_us + 1000);
> > > > +
> > > > +	if (word_count == 0)
> > > > +		return 0;
> > > > +
> > > > +	data_buf = &buf->start;
> > > > +	ret = i2c_master_recv(client, data_buf, size);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +	if (ret != size)
> > > > +		return -EIO;
> > > > +
> > > > +	return sgp_verify_buffer(data, buf, word_count);
> > > > +}
> > > > +
> > > > +/**
> > > > + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
> > > > + * The caller must hold data->data_lock for the duration of the
> > > > call.
> > > > + * @data:       SGP data
> > > > + *
> > > > + * Return:      0 on success, -EBUSY on default values, negative
> > > > error
> > > > + *              otherwise.
> > > > + */
> > > > +
> > > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > > +{
> > > > +	int ret;
> > > > +	/* data contains default values */
> > > > +	bool default_vals = !time_after(jiffies, data-
> > > > >iaq_init_start_jiffies +
> > > > +						 data-
> > > > >iaq_defval_skip_jiffies);
> > > > +
> > > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data-
> > > > >iaq_buffer,
> > > > +			   SGP_MEASUREMENT_LEN,
> > > > SGP_MEASUREMENT_DURATION_US);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > > > +
> > > > +	if (default_vals)
> > > > +		return -EBUSY;
> > > > +
> > > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static void sgp_iaq_thread_sleep_until(const struct sgp_data
> > > > *data,
> > > > +				       unsigned long sleep_jiffies)
> > > > +{
> > > > +	const long IAQ_POLL = 50000;
> > > > +
> > > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > > > +		if (kthread_should_stop() || data-
> > > > >iaq_init_start_jiffies == 0)
> > > > +			return;
> > > > +	}
> > > > +}
> > > > +
> > > > +static int sgp_iaq_threadfn(void *p)
> > > > +{
> > > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > > +	unsigned long next_update_jiffies;
> > > > +	int ret;
> > > > +
> > > > +	while (!kthread_should_stop()) {
> > > > +		mutex_lock(&data->data_lock);
> > > > +		if (data->iaq_init_start_jiffies == 0) {
> > > > +			ret = sgp_read_cmd(data, data->iaq_init_cmd,
> > > > NULL, 0,
> > > > +					   SGP_CMD_DURATION_US);
> > > > +			if (ret < 0)
> > > > +				goto unlock_sleep_continue;
> > > > +			data->iaq_init_start_jiffies = jiffies;
> > > > +		}
> > > > +
> > > > +		ret = sgp_measure_iaq(data);
> > > > +		if (ret && ret != -EBUSY) {
> > > > +			dev_warn(&data->client->dev,
> > > > +				 "IAQ measurement error [%d]\n", ret);
> > > > +		}
> > > > +unlock_sleep_continue:
> > > > +		next_update_jiffies = jiffies + data-
> > > > >measure_interval_jiffies;
> > > > +		mutex_unlock(&data->data_lock);
> > > > +		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > > +			struct iio_chan_spec const *chan, int *val,
> > > > +			int *val2, long mask)
> > > > +{
> > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > +	struct sgp_crc_word *words;
> > > > +	int ret;
> > > > +
> > > > +	switch (mask) {
> > > > +	case IIO_CHAN_INFO_PROCESSED:
> > > > +		mutex_lock(&data->data_lock);
> > > > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
> > > > +			mutex_unlock(&data->data_lock);
> > > > +			return -EBUSY;
> > > > +		}
> > > > +		words = data->iaq_buffer.raw_words;
> > > > +		switch (chan->address) {
> > > > +		case SGP30_IAQ_TVOC_IDX:
> > > > +		case SGPC3_IAQ_TVOC_IDX:
> > > > +			*val = 0;
> > > > +			*val2 = be16_to_cpu(words[1].value);
> > > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > > +			break;
> > > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > > +			*val = 0;
> > > > +			*val2 = be16_to_cpu(words[0].value);
> > > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > > +			break;
> > > > +		default:
> > > > +			ret = -EINVAL;
> > > > +			break;
> > > > +		}
> > > > +		mutex_unlock(&data->data_lock);
> > > > +		break;
> > > > +	case IIO_CHAN_INFO_RAW:
> > > > +		mutex_lock(&data->data_lock);
> > > > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > > > +			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
> > > > +				ret = -EBUSY;
> > > > +			else
> > > > +				ret = 0;
> > > > +			words = data->iaq_buffer.raw_words;
> > > > +		} else {
> > > > +			ret = sgp_read_cmd(data, data-
> > > > >measure_gas_signals_cmd,
> > > > +					   &data->buffer,
> > > > SGP_MEASUREMENT_LEN,
> > > > +					   SGP_MEASUREMENT_DURATION_US)
> > > > ;
> > > > +			words = data->buffer.raw_words;
> > > > +		}
> > > > +		if (ret) {
> > > > +			mutex_unlock(&data->data_lock);
> > > > +			return ret;
> > > > +		}
> > > > +
> > > > +		switch (chan->address) {
> > > > +		case SGP30_SIG_ETOH_IDX:
> > > > +			*val = be16_to_cpu(words[1].value);
> > > > +			ret = IIO_VAL_INT;
> > > > +			break;
> > > > +		case SGPC3_SIG_ETOH_IDX:
> > > > +		case SGP30_SIG_H2_IDX:
> > > > +			*val = be16_to_cpu(words[0].value);
> > > > +			ret = IIO_VAL_INT;
> > > > +			break;
> > > > +		default:
> > > > +			ret = -EINVAL;
> > > > +			break;
> > > > +		}
> > > > +		mutex_unlock(&data->data_lock);
> > > > +		break;
> > > > +	default:
> > > > +		return -EINVAL;
> > > > +	}
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int sgp_check_compat(struct sgp_data *data,
> > > > +			    unsigned int product_id)
> > > > +{
> > > > +	const struct sgp_version *supported_versions;
> > > > +	u16 ix, num_fs;
> > > > +	u16 product, generation, major, minor;
> > > > +
> > > > +	/* driver does not match product */
> > > > +	generation = SGP_VERS_GEN(data);
> > > > +	if (generation != 0) {
> > > > +		dev_err(&data->client->dev,
> > > > +			"incompatible product generation %d != 0",
> > > > generation);
> > > > +		return -ENODEV;
> > > > +	}
> > > > +
> > > > +	product = SGP_VERS_PRODUCT(data);
> > > > +	if (product != product_id) {
> > > > +		dev_err(&data->client->dev,
> > > > +			"sensor reports a different product:
> > > > 0x%04hx\n",
> > > > +			product);
> > > > +		return -ENODEV;
> > > > +	}
> > > > +
> > > > +	if (SGP_VERS_RESERVED(data))
> > > > +		dev_warn(&data->client->dev, "reserved bit is set\n");
> > > > +
> > > > +	/* engineering samples are not supported: no interface
> > > > guarantees */
> > > > +	if (SGP_VERS_ENG_BIT(data))
> > > > +		return -ENODEV;
> > > > +
> > > > +	switch (product) {
> > > > +	case SGP30:
> > > > +		supported_versions = supported_versions_sgp30;
> > > > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > > > +		break;
> > > > +	case SGPC3:
> > > > +		supported_versions = supported_versions_sgpc3;
> > > > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > > > +		break;
> > > > +	default:
> > > > +		return -ENODEV;
> > > > +	}
> > > > +
> > > > +	major = SGP_VERS_MAJOR(data);
> > > > +	minor = SGP_VERS_MINOR(data);
> > > > +	for (ix = 0; ix < num_fs; ix++) {
> > > > +		if (major == supported_versions[ix].major &&
> > > > +		    minor >= supported_versions[ix].minor)
> > > > +			return 0;
> > > > +	}
> > > > +	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
> > > > +		major, minor);
> > > > +
> > > > +	return -ENODEV;
> > > > +}
> > > > +
> > > > +static void sgp_init(struct sgp_data *data)
> > > > +{
> > > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > > +	data->iaq_init_start_jiffies = 0;
> > > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > > +	case SGP30:
> > > > +		data->measure_interval_jiffies =
> > > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > > > +		data->measure_gas_signals_cmd =
> > > > SGP30_CMD_MEASURE_SIGNAL;
> > > > +		data->product_id = SGP30;
> > > > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > > > +		break;
> > > > +	case SGPC3:
> > > > +		data->measure_interval_jiffies =
> > > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > +		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > +		data->product_id = SGPC3;
> > > > +		data->iaq_defval_skip_jiffies =
> > > > +			43 * data->measure_interval_jiffies;
> > > > +		break;
> > > > +	};
> > > > +}
> > > > +
> > > > +static const struct iio_info sgp_info = {
> > > > +	.read_raw	= sgp_read_raw,
> > > > +};
> > > > +
> > > > +static const struct of_device_id sgp_dt_ids[] = {
> > > > +	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
> > > > +	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
> > > > +	{ }
> > > > +};
> > > > +
> > > > +static int sgp_probe(struct i2c_client *client,
> > > > +		     const struct i2c_device_id *id)
> > > > +{
> > > > +	struct iio_dev *indio_dev;
> > > > +	struct sgp_data *data;
> > > > +	const struct of_device_id *of_id;
> > > > +	unsigned long product_id;
> > > > +	int ret;
> > > > +
> > > > +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > > > +	if (!indio_dev)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > > > +	if (of_id)
> > > > +		product_id = (unsigned long)of_id->data;
> > > > +	else
> > > > +		product_id = id->driver_data;
> > > > +
> > > > +	data = iio_priv(indio_dev);
> > > > +	i2c_set_clientdata(client, indio_dev);
> > > > +	data->client = client;
> > > > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > > > +	mutex_init(&data->data_lock);
> > > > +
> > > > +	/* get feature set version and write it to client data */
> > > > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data-
> > > > >buffer, 1,
> > > > +			   SGP_CMD_DURATION_US);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	data->feature_set = be16_to_cpu(data-
> > > > >buffer.raw_words[0].value);
> > > > +
> > > > +	ret = sgp_check_compat(data, product_id);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	indio_dev->dev.parent = &client->dev;
> > > > +	indio_dev->info = &sgp_info;
> > > > +	indio_dev->name = id->name;
> > > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > > +	indio_dev->channels = sgp_devices[product_id].channels;
> > > > +	indio_dev->num_channels = sgp_devices[product_id].num_channels;
> > > > +
> > > > +	sgp_init(data);
> > > > +
> > > > +	ret = devm_iio_device_register(&client->dev, indio_dev);
> > > > +	if (ret) {
> > > > +		dev_err(&client->dev, "failed to register iio
> > > > device\n");
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > > > +				       "%s-iaq", data->client->name);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int sgp_remove(struct i2c_client *client)
> > > > +{
> > > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > +
> > > > +	if (data->iaq_thread)
> > > > +		kthread_stop(data->iaq_thread);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static const struct i2c_device_id sgp_id[] = {
> > > > +	{ "sgp30", SGP30 },
> > > > +	{ "sgpc3", SGPC3 },
> > > > +	{ }
> > > > +};
> > > > +
> > > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > > +
> > > > +static struct i2c_driver sgp_driver = {
> > > > +	.driver = {
> > > > +		.name = "sgp30",
> > > > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > > > +	},
> > > > +	.probe = sgp_probe,
> > > > +	.remove = sgp_remove,
> > > > +	.id_table = sgp_id,
> > > > +};
> > > > +module_i2c_driver(sgp_driver);
> > > > +
> > > > +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>")
> > > > ;
> > > > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
> > > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > > +MODULE_LICENSE("GPL v2");
> > >
> > >
> >
>
>
Jonathan Cameron Dec. 22, 2018, 4:56 p.m. UTC | #5
On Tue, 18 Dec 2018 18:44:40 +0100
Tomasz Duszynski <tduszyns@gmail.com> wrote:

> On Mon, Dec 17, 2018 at 11:59:36AM +0000, Jonathan Cameron wrote:
> > On Sun, 16 Dec 2018 17:38:18 +0100
> > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> >  
> > > On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:  
> > > > On Thu, 13 Dec 2018 15:43:23 +0100
> > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > >  
> > > > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
> > > > >
> > > > > Supported Features:
> > > > >
> > > > > * Indoor Air Quality (IAQ) concentrations for
> > > > >   - tVOC (in_concentration_voc_input)
> > > > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > > >
> > > > >   IAQ concentrations are periodically read out by a background
> > > > > thread
> > > > >   to allow the sensor to maintain its internal baseline.
> > > > >
> > > > > * Gas concentration signals
> > > > >   - Ethanol (in_concentration_ethanol_raw)
> > > > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > > >
> > > > > https://www.sensirion.com/file/datasheet_sgp30
> > > > > https://www.sensirion.com/file/datasheet_sgpc3
> > > > >
> > > > > Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>  
> > > >
> > > > Why do we provide endianness info given we don't provide the buffered
> > > > interface?  It's only used when we do.  
> > >
> > > Makes sense but I wasn't aware of it. The initial submission came with
> > > buffering, so it probably wasn't spotted in v2.
> > >  
> > > >
> > > > Some over the top line wrapping as well.  However as that's it
> > > > I'll just clean up whilst applying.  If I've missed something odd
> > > > around the endian thing shout!  
> > >
> > > No that's it, thanks a lot.
> > >  
> > > >
> > > > Jonathan
> > > >  
> > > > > ---
> > > > >  drivers/iio/chemical/Kconfig  |  13 +
> > > > >  drivers/iio/chemical/Makefile |   1 +
> > > > >  drivers/iio/chemical/sgp30.c  | 603
> > > > > ++++++++++++++++++++++++++++++++++
> > > > >  3 files changed, 617 insertions(+)
> > > > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > > >
> > > > > diff --git a/drivers/iio/chemical/Kconfig
> > > > > b/drivers/iio/chemical/Kconfig
> > > > > index b8e005be4f87..b0c912be94a9 100644
> > > > > --- a/drivers/iio/chemical/Kconfig
> > > > > +++ b/drivers/iio/chemical/Kconfig
> > > > > @@ -61,6 +61,19 @@ config IAQCORE
> > > > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
> > > > >  	  sensors
> > > > >
> > > > > +config SENSIRION_SGP30  
> > >
> > > I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
> > > consistency's sake I'm fine with dropping the branding. Up to you.  
> >
> > We've never had any hard rules on this, at least partly because a lot
> > of drivers came from other subsystems in the early days.
> >
> > We probably should have a rule though.  SGP30 for example is generic
> > enough that it might well be reused by someone else.
> >  
> 
> Wondering how likely is this? These days some popular sensors have their
> clones. Interestingly enough, they are sold as genuine i.e
> without vendor/sensor name changes. On the other hand there are very
> same ICs manufactured by different companies but still with
> different names.
> 
> > Anyone have any strong opinions on this?  If not I think I'll start
> > encouraging prefixing with manufacturer of first supported device.
> >  
> 
> What about sticking to what we have now and adding prefix when we do
> have naming collision? Just my 2 cents.
> 
Agreed in the sense that it's not worth changing existing drivers unless
we have a reason to..

But if the question is raised for what is preferred, I think adding a vendor
is good.  There have been clashes with i2c devices in the past where the
binding without vendor was insufficient to distinguish the part.

Not sure what it was, but I remember the discussion being one of the motivations
to add vendor prefixes to the look up for i2c devices.

Jonathan

> > Jonathan
> >  
> > >  
> > > > > +	tristate "Sensirion SGPxx gas sensors"
> > > > > +	depends on I2C
> > > > > +	select CRC8
> > > > > +	help
> > > > > +	  Say Y here to build I2C interface support for the following
> > > > > +	  Sensirion SGP gas sensors:
> > > > > +	    * SGP30 gas sensor
> > > > > +	    * SGPC3 low power gas sensor
> > > > > +
> > > > > +	  To compile this driver as module, choose M here: the
> > > > > +	  module will be called sgp30.
> > > > > +
> > > > >  config VZ89X
> > > > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > > > >  	depends on I2C
> > > > > diff --git a/drivers/iio/chemical/Makefile
> > > > > b/drivers/iio/chemical/Makefile
> > > > > index 2f4c4ba4d781..61e83944db1a 100644
> > > > > --- a/drivers/iio/chemical/Makefile
> > > > > +++ b/drivers/iio/chemical/Makefile
> > > > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> > > > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > > > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > > > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > > > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > > > diff --git a/drivers/iio/chemical/sgp30.c
> > > > > b/drivers/iio/chemical/sgp30.c
> > > > > new file mode 100644
> > > > > index 000000000000..90eb4cbb18cf
> > > > > --- /dev/null
> > > > > +++ b/drivers/iio/chemical/sgp30.c
> > > > > @@ -0,0 +1,603 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +/*
> > > > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > > > + *
> > > > > + * Copyright (C) 2018 Andreas Brauchli <  
> > > > > andreas.brauchli@sensirion.com>  
> > > > > + *
> > > > > + * I2C slave address: 0x58
> > > > > + *
> > > > > + * Datasheets:
> > > > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > > > + *
> > > > > + * TODO:
> > > > > + * - baseline support
> > > > > + * - humidity compensation
> > > > > + * - power mode switching (SGPC3)
> > > > > + */
> > > > > +
> > > > > +#include <linux/crc8.h>
> > > > > +#include <linux/delay.h>
> > > > > +#include <linux/kthread.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/mutex.h>
> > > > > +#include <linux/i2c.h>
> > > > > +#include <linux/of_device.h>
> > > > > +#include <linux/iio/iio.h>
> > > > > +#include <linux/iio/sysfs.h>
> > > > > +
> > > > > +#define SGP_WORD_LEN				2
> > > > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > > > +#define SGP_CRC8_INIT				0xff
> > > > > +#define SGP_CRC8_LEN				1
> > > > > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
> > > > > +#define SGP_CMD_DURATION_US			12000
> > > > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > > > +#define SGP_CMD_LEN				SGP_WORD_LEN
> > > > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN +
> > > > > 2 * SGP_WORD_LEN)
> > > > > +#define SGP_MEASUREMENT_LEN			2
> > > > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > > > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) &
> > > > > 0xf000) >> 12)
> > > > > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) &
> > > > > 0x0800) >> 11)
> > > > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
> > > > > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) &
> > > > > 0x0100) >> 8)
> > > > > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) &
> > > > > 0x00e0) >> 5)
> > > > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set) &
> > > > > 0x001f)
> > > > > +
> > > > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > > > +
> > > > > +enum sgp_product_id {
> > > > > +	SGP30 = 0,
> > > > > +	SGPC3,
> > > > > +};
> > > > > +
> > > > > +enum sgp30_channel_idx {
> > > > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > > > +	SGP30_IAQ_CO2EQ_IDX,
> > > > > +	SGP30_SIG_ETOH_IDX,
> > > > > +	SGP30_SIG_H2_IDX,
> > > > > +};
> > > > > +
> > > > > +enum sgpc3_channel_idx {
> > > > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > > > +	SGPC3_SIG_ETOH_IDX,
> > > > > +};
> > > > > +
> > > > > +enum sgp_cmd {
> > > > > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > > > > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > > > > +	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
> > > > > +	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
> > > > > +
> > > > > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > > > > +
> > > > > +	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
> > > > > +};
> > > > > +
> > > > > +struct sgp_version {
> > > > > +	u8 major;
> > > > > +	u8 minor;
> > > > > +};
> > > > > +
> > > > > +struct sgp_crc_word {
> > > > > +	__be16 value;
> > > > > +	u8 crc8;
> > > > > +} __attribute__((__packed__));
> > > > > +
> > > > > +union sgp_reading {
> > > > > +	u8 start;
> > > > > +	struct sgp_crc_word raw_words[4];
> > > > > +};
> > > > > +
> > > > > +enum _iaq_buffer_state {
> > > > > +	IAQ_BUFFER_EMPTY = 0,
> > > > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > > > +	IAQ_BUFFER_VALID,
> > > > > +};
> > > > > +
> > > > > +struct sgp_data {
> > > > > +	struct i2c_client *client;
> > > > > +	struct task_struct *iaq_thread;
> > > > > +	struct mutex data_lock;
> > > > > +	unsigned long iaq_init_start_jiffies;
> > > > > +	unsigned long iaq_defval_skip_jiffies;
> > > > > +	u16 product_id;
> > > > > +	u16 feature_set;
> > > > > +	unsigned long measure_interval_jiffies;
> > > > > +	enum sgp_cmd iaq_init_cmd;
> > > > > +	enum sgp_cmd measure_iaq_cmd;
> > > > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > > > +	union sgp_reading buffer;
> > > > > +	union sgp_reading iaq_buffer;
> > > > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > > > +};
> > > > > +
> > > > > +struct sgp_device {
> > > > > +	const struct iio_chan_spec *channels;
> > > > > +	int num_channels;
> > > > > +};
> > > > > +
> > > > > +static const struct sgp_version supported_versions_sgp30[] = {
> > > > > +	{
> > > > > +		.major = 1,
> > > > > +		.minor = 0,
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct sgp_version supported_versions_sgpc3[] = {
> > > > > +	{
> > > > > +		.major = 0,
> > > > > +		.minor = 4,
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > > > +	},
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_CO2,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > > > +	},
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate =
> > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > >
> > > > Definitely looks like it'll fit in under 80 chars.
> > > >  
> > > > > +		.address = SGP30_SIG_ETOH_IDX,
> > > > > +		.scan_type = {
> > > > > +			.endianness = IIO_BE,
> > > > > +		},
> > > > > +	},
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_H2,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate =
> > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > >
> > > > Same here on length.
> > > >  
> > > > > +		.address = SGP30_SIG_H2_IDX,
> > > > > +		.scan_type = {
> > > > > +			.endianness = IIO_BE,
> > > > > +		},
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > > > +	},
> > > > > +	{
> > > > > +		.type = IIO_CONCENTRATION,
> > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > +		.modified = 1,
> > > > > +		.info_mask_separate =
> > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > >
> > > > And another on length.  
> > > > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > > > +		.scan_type = {
> > > > > +			.endianness = IIO_BE,
> > > > > +		},
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +static const struct sgp_device sgp_devices[] = {
> > > > > +	[SGP30] = {
> > > > > +		.channels = sgp30_channels,
> > > > > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > > > > +	},
> > > > > +	[SGPC3] = {
> > > > > +		.channels = sgpc3_channels,
> > > > > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > > > > +	},
> > > > > +};
> > > > > +
> > > > > +/**
> > > > > + * sgp_verify_buffer() - verify the checksums of the data buffer
> > > > > words
> > > > > + *
> > > > > + * @data:       SGP data
> > > > > + * @buf:        Raw data buffer
> > > > > + * @word_count: Num data words stored in the buffer, excluding CRC
> > > > > bytes
> > > > > + *
> > > > > + * Return:      0 on success, negative error otherwise.
> > > > > + */
> > > > > +static int sgp_verify_buffer(const struct sgp_data *data,
> > > > > +			     union sgp_reading *buf, size_t word_count)
> > > > > +{
> > > > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > > > +	int i;
> > > > > +	u8 crc;
> > > > > +	u8 *data_buf = &buf->start;
> > > > > +
> > > > > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
> > > > > +		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
> > > > > +			   SGP_CRC8_INIT);
> > > > > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > > > > +			dev_err(&data->client->dev, "CRC error\n");
> > > > > +			return -EIO;
> > > > > +		}
> > > > > +	}
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +/**
> > > > > + * sgp_read_cmd() - reads data from sensor after issuing a command
> > > > > + * The caller must hold data->data_lock for the duration of the
> > > > > call.
> > > > > + * @data:        SGP data
> > > > > + * @cmd:         SGP Command to issue
> > > > > + * @buf:         Raw data buffer to use
> > > > > + * @word_count:  Num words to read, excluding CRC bytes
> > > > > + *
> > > > > + * Return:       0 on success, negative error otherwise.
> > > > > + */
> > > > > +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
> > > > > +			union sgp_reading *buf, size_t word_count,
> > > > > +			unsigned long duration_us)
> > > > > +{
> > > > > +	int ret;
> > > > > +	struct i2c_client *client = data->client;
> > > > > +	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
> > > > > +	u8 *data_buf;
> > > > > +
> > > > > +	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
> > > > > +	if (ret != SGP_CMD_LEN)
> > > > > +		return -EIO;
> > > > > +	usleep_range(duration_us, duration_us + 1000);
> > > > > +
> > > > > +	if (word_count == 0)
> > > > > +		return 0;
> > > > > +
> > > > > +	data_buf = &buf->start;
> > > > > +	ret = i2c_master_recv(client, data_buf, size);
> > > > > +	if (ret < 0)
> > > > > +		return ret;
> > > > > +	if (ret != size)
> > > > > +		return -EIO;
> > > > > +
> > > > > +	return sgp_verify_buffer(data, buf, word_count);
> > > > > +}
> > > > > +
> > > > > +/**
> > > > > + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
> > > > > + * The caller must hold data->data_lock for the duration of the
> > > > > call.
> > > > > + * @data:       SGP data
> > > > > + *
> > > > > + * Return:      0 on success, -EBUSY on default values, negative
> > > > > error
> > > > > + *              otherwise.
> > > > > + */
> > > > > +
> > > > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > > > +{
> > > > > +	int ret;
> > > > > +	/* data contains default values */
> > > > > +	bool default_vals = !time_after(jiffies, data-  
> > > > > >iaq_init_start_jiffies +  
> > > > > +						 data-  
> > > > > >iaq_defval_skip_jiffies);  
> > > > > +
> > > > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data-  
> > > > > >iaq_buffer,  
> > > > > +			   SGP_MEASUREMENT_LEN,
> > > > > SGP_MEASUREMENT_DURATION_US);
> > > > > +	if (ret < 0)
> > > > > +		return ret;
> > > > > +
> > > > > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > > > > +
> > > > > +	if (default_vals)
> > > > > +		return -EBUSY;
> > > > > +
> > > > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static void sgp_iaq_thread_sleep_until(const struct sgp_data
> > > > > *data,
> > > > > +				       unsigned long sleep_jiffies)
> > > > > +{
> > > > > +	const long IAQ_POLL = 50000;
> > > > > +
> > > > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > > > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > > > > +		if (kthread_should_stop() || data-  
> > > > > >iaq_init_start_jiffies == 0)  
> > > > > +			return;
> > > > > +	}
> > > > > +}
> > > > > +
> > > > > +static int sgp_iaq_threadfn(void *p)
> > > > > +{
> > > > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > > > +	unsigned long next_update_jiffies;
> > > > > +	int ret;
> > > > > +
> > > > > +	while (!kthread_should_stop()) {
> > > > > +		mutex_lock(&data->data_lock);
> > > > > +		if (data->iaq_init_start_jiffies == 0) {
> > > > > +			ret = sgp_read_cmd(data, data->iaq_init_cmd,
> > > > > NULL, 0,
> > > > > +					   SGP_CMD_DURATION_US);
> > > > > +			if (ret < 0)
> > > > > +				goto unlock_sleep_continue;
> > > > > +			data->iaq_init_start_jiffies = jiffies;
> > > > > +		}
> > > > > +
> > > > > +		ret = sgp_measure_iaq(data);
> > > > > +		if (ret && ret != -EBUSY) {
> > > > > +			dev_warn(&data->client->dev,
> > > > > +				 "IAQ measurement error [%d]\n", ret);
> > > > > +		}
> > > > > +unlock_sleep_continue:
> > > > > +		next_update_jiffies = jiffies + data-  
> > > > > >measure_interval_jiffies;  
> > > > > +		mutex_unlock(&data->data_lock);
> > > > > +		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
> > > > > +	}
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > > > +			struct iio_chan_spec const *chan, int *val,
> > > > > +			int *val2, long mask)
> > > > > +{
> > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > +	struct sgp_crc_word *words;
> > > > > +	int ret;
> > > > > +
> > > > > +	switch (mask) {
> > > > > +	case IIO_CHAN_INFO_PROCESSED:
> > > > > +		mutex_lock(&data->data_lock);
> > > > > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
> > > > > +			mutex_unlock(&data->data_lock);
> > > > > +			return -EBUSY;
> > > > > +		}
> > > > > +		words = data->iaq_buffer.raw_words;
> > > > > +		switch (chan->address) {
> > > > > +		case SGP30_IAQ_TVOC_IDX:
> > > > > +		case SGPC3_IAQ_TVOC_IDX:
> > > > > +			*val = 0;
> > > > > +			*val2 = be16_to_cpu(words[1].value);
> > > > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > > > +			break;
> > > > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > > > +			*val = 0;
> > > > > +			*val2 = be16_to_cpu(words[0].value);
> > > > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > > > +			break;
> > > > > +		default:
> > > > > +			ret = -EINVAL;
> > > > > +			break;
> > > > > +		}
> > > > > +		mutex_unlock(&data->data_lock);
> > > > > +		break;
> > > > > +	case IIO_CHAN_INFO_RAW:
> > > > > +		mutex_lock(&data->data_lock);
> > > > > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > > > > +			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
> > > > > +				ret = -EBUSY;
> > > > > +			else
> > > > > +				ret = 0;
> > > > > +			words = data->iaq_buffer.raw_words;
> > > > > +		} else {
> > > > > +			ret = sgp_read_cmd(data, data-  
> > > > > >measure_gas_signals_cmd,  
> > > > > +					   &data->buffer,
> > > > > SGP_MEASUREMENT_LEN,
> > > > > +					   SGP_MEASUREMENT_DURATION_US)
> > > > > ;
> > > > > +			words = data->buffer.raw_words;
> > > > > +		}
> > > > > +		if (ret) {
> > > > > +			mutex_unlock(&data->data_lock);
> > > > > +			return ret;
> > > > > +		}
> > > > > +
> > > > > +		switch (chan->address) {
> > > > > +		case SGP30_SIG_ETOH_IDX:
> > > > > +			*val = be16_to_cpu(words[1].value);
> > > > > +			ret = IIO_VAL_INT;
> > > > > +			break;
> > > > > +		case SGPC3_SIG_ETOH_IDX:
> > > > > +		case SGP30_SIG_H2_IDX:
> > > > > +			*val = be16_to_cpu(words[0].value);
> > > > > +			ret = IIO_VAL_INT;
> > > > > +			break;
> > > > > +		default:
> > > > > +			ret = -EINVAL;
> > > > > +			break;
> > > > > +		}
> > > > > +		mutex_unlock(&data->data_lock);
> > > > > +		break;
> > > > > +	default:
> > > > > +		return -EINVAL;
> > > > > +	}
> > > > > +
> > > > > +	return ret;
> > > > > +}
> > > > > +
> > > > > +static int sgp_check_compat(struct sgp_data *data,
> > > > > +			    unsigned int product_id)
> > > > > +{
> > > > > +	const struct sgp_version *supported_versions;
> > > > > +	u16 ix, num_fs;
> > > > > +	u16 product, generation, major, minor;
> > > > > +
> > > > > +	/* driver does not match product */
> > > > > +	generation = SGP_VERS_GEN(data);
> > > > > +	if (generation != 0) {
> > > > > +		dev_err(&data->client->dev,
> > > > > +			"incompatible product generation %d != 0",
> > > > > generation);
> > > > > +		return -ENODEV;
> > > > > +	}
> > > > > +
> > > > > +	product = SGP_VERS_PRODUCT(data);
> > > > > +	if (product != product_id) {
> > > > > +		dev_err(&data->client->dev,
> > > > > +			"sensor reports a different product:
> > > > > 0x%04hx\n",
> > > > > +			product);
> > > > > +		return -ENODEV;
> > > > > +	}
> > > > > +
> > > > > +	if (SGP_VERS_RESERVED(data))
> > > > > +		dev_warn(&data->client->dev, "reserved bit is set\n");
> > > > > +
> > > > > +	/* engineering samples are not supported: no interface
> > > > > guarantees */
> > > > > +	if (SGP_VERS_ENG_BIT(data))
> > > > > +		return -ENODEV;
> > > > > +
> > > > > +	switch (product) {
> > > > > +	case SGP30:
> > > > > +		supported_versions = supported_versions_sgp30;
> > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > > > > +		break;
> > > > > +	case SGPC3:
> > > > > +		supported_versions = supported_versions_sgpc3;
> > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > > > > +		break;
> > > > > +	default:
> > > > > +		return -ENODEV;
> > > > > +	}
> > > > > +
> > > > > +	major = SGP_VERS_MAJOR(data);
> > > > > +	minor = SGP_VERS_MINOR(data);
> > > > > +	for (ix = 0; ix < num_fs; ix++) {
> > > > > +		if (major == supported_versions[ix].major &&
> > > > > +		    minor >= supported_versions[ix].minor)
> > > > > +			return 0;
> > > > > +	}
> > > > > +	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
> > > > > +		major, minor);
> > > > > +
> > > > > +	return -ENODEV;
> > > > > +}
> > > > > +
> > > > > +static void sgp_init(struct sgp_data *data)
> > > > > +{
> > > > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > > > +	data->iaq_init_start_jiffies = 0;
> > > > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > > > +	case SGP30:
> > > > > +		data->measure_interval_jiffies =
> > > > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > > > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > > > > +		data->measure_gas_signals_cmd =
> > > > > SGP30_CMD_MEASURE_SIGNAL;
> > > > > +		data->product_id = SGP30;
> > > > > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > > > > +		break;
> > > > > +	case SGPC3:
> > > > > +		data->measure_interval_jiffies =
> > > > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > > > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > > +		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > > +		data->product_id = SGPC3;
> > > > > +		data->iaq_defval_skip_jiffies =
> > > > > +			43 * data->measure_interval_jiffies;
> > > > > +		break;
> > > > > +	};
> > > > > +}
> > > > > +
> > > > > +static const struct iio_info sgp_info = {
> > > > > +	.read_raw	= sgp_read_raw,
> > > > > +};
> > > > > +
> > > > > +static const struct of_device_id sgp_dt_ids[] = {
> > > > > +	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
> > > > > +	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
> > > > > +	{ }
> > > > > +};
> > > > > +
> > > > > +static int sgp_probe(struct i2c_client *client,
> > > > > +		     const struct i2c_device_id *id)
> > > > > +{
> > > > > +	struct iio_dev *indio_dev;
> > > > > +	struct sgp_data *data;
> > > > > +	const struct of_device_id *of_id;
> > > > > +	unsigned long product_id;
> > > > > +	int ret;
> > > > > +
> > > > > +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > > > > +	if (!indio_dev)
> > > > > +		return -ENOMEM;
> > > > > +
> > > > > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > > > > +	if (of_id)
> > > > > +		product_id = (unsigned long)of_id->data;
> > > > > +	else
> > > > > +		product_id = id->driver_data;
> > > > > +
> > > > > +	data = iio_priv(indio_dev);
> > > > > +	i2c_set_clientdata(client, indio_dev);
> > > > > +	data->client = client;
> > > > > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > > > > +	mutex_init(&data->data_lock);
> > > > > +
> > > > > +	/* get feature set version and write it to client data */
> > > > > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data-  
> > > > > >buffer, 1,  
> > > > > +			   SGP_CMD_DURATION_US);
> > > > > +	if (ret < 0)
> > > > > +		return ret;
> > > > > +
> > > > > +	data->feature_set = be16_to_cpu(data-  
> > > > > >buffer.raw_words[0].value);  
> > > > > +
> > > > > +	ret = sgp_check_compat(data, product_id);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	indio_dev->dev.parent = &client->dev;
> > > > > +	indio_dev->info = &sgp_info;
> > > > > +	indio_dev->name = id->name;
> > > > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > +	indio_dev->channels = sgp_devices[product_id].channels;
> > > > > +	indio_dev->num_channels = sgp_devices[product_id].num_channels;
> > > > > +
> > > > > +	sgp_init(data);
> > > > > +
> > > > > +	ret = devm_iio_device_register(&client->dev, indio_dev);
> > > > > +	if (ret) {
> > > > > +		dev_err(&client->dev, "failed to register iio
> > > > > device\n");
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > > > > +				       "%s-iaq", data->client->name);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static int sgp_remove(struct i2c_client *client)
> > > > > +{
> > > > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > +
> > > > > +	if (data->iaq_thread)
> > > > > +		kthread_stop(data->iaq_thread);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct i2c_device_id sgp_id[] = {
> > > > > +	{ "sgp30", SGP30 },
> > > > > +	{ "sgpc3", SGPC3 },
> > > > > +	{ }
> > > > > +};
> > > > > +
> > > > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > > > +
> > > > > +static struct i2c_driver sgp_driver = {
> > > > > +	.driver = {
> > > > > +		.name = "sgp30",
> > > > > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > > > > +	},
> > > > > +	.probe = sgp_probe,
> > > > > +	.remove = sgp_remove,
> > > > > +	.id_table = sgp_id,
> > > > > +};
> > > > > +module_i2c_driver(sgp_driver);
> > > > > +
> > > > > +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>")
> > > > > ;
> > > > > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
> > > > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > > > +MODULE_LICENSE("GPL v2");  
> > > >
> > > >  
> > >  
> >
> >
Andreas Brauchli March 7, 2019, 8:34 p.m. UTC | #6
On Sat, 2018-12-22 at 16:56 +0000, Jonathan Cameron wrote:
> On Tue, 18 Dec 2018 18:44:40 +0100
> Tomasz Duszynski <tduszyns@gmail.com> wrote:
> 
> > On Mon, Dec 17, 2018 at 11:59:36AM +0000, Jonathan Cameron wrote:
> > > On Sun, 16 Dec 2018 17:38:18 +0100
> > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > >  
> > > > On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:  
> > > > > On Thu, 13 Dec 2018 15:43:23 +0100
> > > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > > >  
> > > > > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas
> > > > > > sensors
> > > > > > 
> > > > > > Supported Features:
> > > > > > 
> > > > > > * Indoor Air Quality (IAQ) concentrations for
> > > > > >   - tVOC (in_concentration_voc_input)
> > > > > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > > > > 
> > > > > >   IAQ concentrations are periodically read out by a
> > > > > > background
> > > > > > thread
> > > > > >   to allow the sensor to maintain its internal baseline.
> > > > > > 
> > > > > > * Gas concentration signals
> > > > > >   - Ethanol (in_concentration_ethanol_raw)
> > > > > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > > > > 
> > > > > > https://www.sensirion.com/file/datasheet_sgp30
> > > > > > https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > 
> > > > > > Signed-off-by: Andreas Brauchli <
> > > > > > andreas.brauchli@sensirion.com>  
> > > > > 
> > > > > Why do we provide endianness info given we don't provide the
> > > > > buffered
> > > > > interface?  It's only used when we do.  
> > > > 
> > > > Makes sense but I wasn't aware of it. The initial submission
> > > > came with
> > > > buffering, so it probably wasn't spotted in v2.
> > > >  
> > > > > 
> > > > > Some over the top line wrapping as well.  However as that's
> > > > > it
> > > > > I'll just clean up whilst applying.  If I've missed something
> > > > > odd
> > > > > around the endian thing shout!  
> > > > 
> > > > No that's it, thanks a lot.
> > > >  
> > > > > 
> > > > > Jonathan
> > > > >  
> > > > > > ---
> > > > > >  drivers/iio/chemical/Kconfig  |  13 +

Apologies for noticing so late, but I fear that the Kconfig part might
have been lost.

It's not in the upstream commit
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.0&id=ce514124161ac2ceb13d10b6c40cbf05c8f0cc91
nor in the testing branch (togreg is already removed)
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/tree/drivers/iio/chemical/Kconfig?h=testing

> > > > > >  drivers/iio/chemical/Makefile |   1 +
> > > > > >  drivers/iio/chemical/sgp30.c  | 603
> > > > > > ++++++++++++++++++++++++++++++++++
> > > > > >  3 files changed, 617 insertions(+)
> > > > > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > > > > 
> > > > > > diff --git a/drivers/iio/chemical/Kconfig
> > > > > > b/drivers/iio/chemical/Kconfig
> > > > > > index b8e005be4f87..b0c912be94a9 100644
> > > > > > --- a/drivers/iio/chemical/Kconfig
> > > > > > +++ b/drivers/iio/chemical/Kconfig
> > > > > > @@ -61,6 +61,19 @@ config IAQCORE
> > > > > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic
> > > > > > Compounds)
> > > > > >  	  sensors
> > > > > > 
> > > > > > +config SENSIRION_SGP30  
> > > > 
> > > > I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
> > > > consistency's sake I'm fine with dropping the branding. Up to
> > > > you.  
> > > 
> > > We've never had any hard rules on this, at least partly because a
> > > lot
> > > of drivers came from other subsystems in the early days.
> > > 
> > > We probably should have a rule though.  SGP30 for example is
> > > generic
> > > enough that it might well be reused by someone else.
> > >  
> > 
> > Wondering how likely is this? These days some popular sensors have
> > their
> > clones. Interestingly enough, they are sold as genuine i.e
> > without vendor/sensor name changes. On the other hand there are
> > very
> > same ICs manufactured by different companies but still with
> > different names.
> > 
> > > Anyone have any strong opinions on this?  If not I think I'll
> > > start
> > > encouraging prefixing with manufacturer of first supported
> > > device.
> > >  
> > 
> > What about sticking to what we have now and adding prefix when we
> > do
> > have naming collision? Just my 2 cents.
> > 
> 
> Agreed in the sense that it's not worth changing existing drivers
> unless
> we have a reason to..
> 
> But if the question is raised for what is preferred, I think adding a
> vendor
> is good.  There have been clashes with i2c devices in the past where
> the
> binding without vendor was insufficient to distinguish the part.
> 
> Not sure what it was, but I remember the discussion being one of the
> motivations
> to add vendor prefixes to the look up for i2c devices.
> 
> Jonathan
> 
> > > Jonathan
> > >  
> > > >  
> > > > > > +	tristate "Sensirion SGPxx gas sensors"
> > > > > > +	depends on I2C
> > > > > > +	select CRC8
> > > > > > +	help
> > > > > > +	  Say Y here to build I2C interface support for the
> > > > > > following
> > > > > > +	  Sensirion SGP gas sensors:
> > > > > > +	    * SGP30 gas sensor
> > > > > > +	    * SGPC3 low power gas sensor
> > > > > > +
> > > > > > +	  To compile this driver as module, choose M here: the
> > > > > > +	  module will be called sgp30.
> > > > > > +
> > > > > >  config VZ89X
> > > > > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > > > > >  	depends on I2C
> > > > > > diff --git a/drivers/iio/chemical/Makefile
> > > > > > b/drivers/iio/chemical/Makefile
> > > > > > index 2f4c4ba4d781..61e83944db1a 100644
> > > > > > --- a/drivers/iio/chemical/Makefile
> > > > > > +++ b/drivers/iio/chemical/Makefile
> > > > > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> > > > > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > > > > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > > > > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > > > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > > > > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > > > > diff --git a/drivers/iio/chemical/sgp30.c
> > > > > > b/drivers/iio/chemical/sgp30.c
> > > > > > new file mode 100644
> > > > > > index 000000000000..90eb4cbb18cf
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/iio/chemical/sgp30.c
> > > > > > @@ -0,0 +1,603 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > > +/*
> > > > > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > > > > + *
> > > > > > + * Copyright (C) 2018 Andreas Brauchli <  
> > > > > > andreas.brauchli@sensirion.com>  
> > > > > > + *
> > > > > > + * I2C slave address: 0x58
> > > > > > + *
> > > > > > + * Datasheets:
> > > > > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > > > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > + *
> > > > > > + * TODO:
> > > > > > + * - baseline support
> > > > > > + * - humidity compensation
> > > > > > + * - power mode switching (SGPC3)
> > > > > > + */
> > > > > > +
> > > > > > +#include <linux/crc8.h>
> > > > > > +#include <linux/delay.h>
> > > > > > +#include <linux/kthread.h>
> > > > > > +#include <linux/module.h>
> > > > > > +#include <linux/mutex.h>
> > > > > > +#include <linux/i2c.h>
> > > > > > +#include <linux/of_device.h>
> > > > > > +#include <linux/iio/iio.h>
> > > > > > +#include <linux/iio/sysfs.h>
> > > > > > +
> > > > > > +#define SGP_WORD_LEN				2
> > > > > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > > > > +#define SGP_CRC8_INIT				0xff
> > > > > > +#define SGP_CRC8_LEN				1
> > > > > > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd
> > > > > > _word)
> > > > > > +#define SGP_CMD_DURATION_US			12000
> > > > > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > > > > +#define SGP_CMD_LEN				SGP_WOR
> > > > > > D_LEN
> > > > > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CM
> > > > > > D_LEN +
> > > > > > 2 * SGP_WORD_LEN)
> > > > > > +#define SGP_MEASUREMENT_LEN			2
> > > > > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > > > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > > > > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) 
> > > > > > &
> > > > > > 0xf000) >> 12)
> > > > > > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) 
> > > > > > &
> > > > > > 0x0800) >> 11)
> > > > > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) &
> > > > > > 0x0600) >> 9)
> > > > > > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) 
> > > > > > &
> > > > > > 0x0100) >> 8)
> > > > > > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) 
> > > > > > &
> > > > > > 0x00e0) >> 5)
> > > > > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set)
> > > > > > &
> > > > > > 0x001f)
> > > > > > +
> > > > > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > > > > +
> > > > > > +enum sgp_product_id {
> > > > > > +	SGP30 = 0,
> > > > > > +	SGPC3,
> > > > > > +};
> > > > > > +
> > > > > > +enum sgp30_channel_idx {
> > > > > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > > > > +	SGP30_IAQ_CO2EQ_IDX,
> > > > > > +	SGP30_SIG_ETOH_IDX,
> > > > > > +	SGP30_SIG_H2_IDX,
> > > > > > +};
> > > > > > +
> > > > > > +enum sgpc3_channel_idx {
> > > > > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > > > > +	SGPC3_SIG_ETOH_IDX,
> > > > > > +};
> > > > > > +
> > > > > > +enum sgp_cmd {
> > > > > > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > > > > > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > > > > > +	SGP_CMD_GET_FEATURE_SET			=
> > > > > > SGP_CMD(0x202f),
> > > > > > +	SGP_CMD_GET_SERIAL_ID			=
> > > > > > SGP_CMD(0x3682),
> > > > > > +
> > > > > > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > > > > > +
> > > > > > +	SGPC3_CMD_MEASURE_RAW			=
> > > > > > SGP_CMD(0x2046),
> > > > > > +};
> > > > > > +
> > > > > > +struct sgp_version {
> > > > > > +	u8 major;
> > > > > > +	u8 minor;
> > > > > > +};
> > > > > > +
> > > > > > +struct sgp_crc_word {
> > > > > > +	__be16 value;
> > > > > > +	u8 crc8;
> > > > > > +} __attribute__((__packed__));
> > > > > > +
> > > > > > +union sgp_reading {
> > > > > > +	u8 start;
> > > > > > +	struct sgp_crc_word raw_words[4];
> > > > > > +};
> > > > > > +
> > > > > > +enum _iaq_buffer_state {
> > > > > > +	IAQ_BUFFER_EMPTY = 0,
> > > > > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > > > > +	IAQ_BUFFER_VALID,
> > > > > > +};
> > > > > > +
> > > > > > +struct sgp_data {
> > > > > > +	struct i2c_client *client;
> > > > > > +	struct task_struct *iaq_thread;
> > > > > > +	struct mutex data_lock;
> > > > > > +	unsigned long iaq_init_start_jiffies;
> > > > > > +	unsigned long iaq_defval_skip_jiffies;
> > > > > > +	u16 product_id;
> > > > > > +	u16 feature_set;
> > > > > > +	unsigned long measure_interval_jiffies;
> > > > > > +	enum sgp_cmd iaq_init_cmd;
> > > > > > +	enum sgp_cmd measure_iaq_cmd;
> > > > > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > > > > +	union sgp_reading buffer;
> > > > > > +	union sgp_reading iaq_buffer;
> > > > > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > > > > +};
> > > > > > +
> > > > > > +struct sgp_device {
> > > > > > +	const struct iio_chan_spec *channels;
> > > > > > +	int num_channels;
> > > > > > +};
> > > > > > +
> > > > > > +static const struct sgp_version supported_versions_sgp30[]
> > > > > > = {
> > > > > > +	{
> > > > > > +		.major = 1,
> > > > > > +		.minor = 0,
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +static const struct sgp_version supported_versions_sgpc3[]
> > > > > > = {
> > > > > > +	{
> > > > > > +		.major = 0,
> > > > > > +		.minor = 4,
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > > > > +	},
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_CO2,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > > > > +	},
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > > > 
> > > > > Definitely looks like it'll fit in under 80 chars.
> > > > >  
> > > > > > +		.address = SGP30_SIG_ETOH_IDX,
> > > > > > +		.scan_type = {
> > > > > > +			.endianness = IIO_BE,
> > > > > > +		},
> > > > > > +	},
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_H2,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > > > 
> > > > > Same here on length.
> > > > >  
> > > > > > +		.address = SGP30_SIG_H2_IDX,
> > > > > > +		.scan_type = {
> > > > > > +			.endianness = IIO_BE,
> > > > > > +		},
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > > > > +	},
> > > > > > +	{
> > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > +		.modified = 1,
> > > > > > +		.info_mask_separate =
> > > > > > +			BIT(IIO_CHAN_INFO_RAW),  
> > > > > 
> > > > > And another on length.  
> > > > > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > > > > +		.scan_type = {
> > > > > > +			.endianness = IIO_BE,
> > > > > > +		},
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +static const struct sgp_device sgp_devices[] = {
> > > > > > +	[SGP30] = {
> > > > > > +		.channels = sgp30_channels,
> > > > > > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > > > > > +	},
> > > > > > +	[SGPC3] = {
> > > > > > +		.channels = sgpc3_channels,
> > > > > > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > > > > > +	},
> > > > > > +};
> > > > > > +
> > > > > > +/**
> > > > > > + * sgp_verify_buffer() - verify the checksums of the data
> > > > > > buffer
> > > > > > words
> > > > > > + *
> > > > > > + * @data:       SGP data
> > > > > > + * @buf:        Raw data buffer
> > > > > > + * @word_count: Num data words stored in the buffer,
> > > > > > excluding CRC
> > > > > > bytes
> > > > > > + *
> > > > > > + * Return:      0 on success, negative error otherwise.
> > > > > > + */
> > > > > > +static int sgp_verify_buffer(const struct sgp_data *data,
> > > > > > +			     union sgp_reading *buf, size_t
> > > > > > word_count)
> > > > > > +{
> > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > SGP_CRC8_LEN);
> > > > > > +	int i;
> > > > > > +	u8 crc;
> > > > > > +	u8 *data_buf = &buf->start;
> > > > > > +
> > > > > > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN)
> > > > > > {
> > > > > > +		crc = crc8(sgp_crc8_table, &data_buf[i],
> > > > > > SGP_WORD_LEN,
> > > > > > +			   SGP_CRC8_INIT);
> > > > > > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > > > > > +			dev_err(&data->client->dev, "CRC
> > > > > > error\n");
> > > > > > +			return -EIO;
> > > > > > +		}
> > > > > > +	}
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +/**
> > > > > > + * sgp_read_cmd() - reads data from sensor after issuing a
> > > > > > command
> > > > > > + * The caller must hold data->data_lock for the duration
> > > > > > of the
> > > > > > call.
> > > > > > + * @data:        SGP data
> > > > > > + * @cmd:         SGP Command to issue
> > > > > > + * @buf:         Raw data buffer to use
> > > > > > + * @word_count:  Num words to read, excluding CRC bytes
> > > > > > + *
> > > > > > + * Return:       0 on success, negative error otherwise.
> > > > > > + */
> > > > > > +static int sgp_read_cmd(struct sgp_data *data, enum
> > > > > > sgp_cmd cmd,
> > > > > > +			union sgp_reading *buf, size_t
> > > > > > word_count,
> > > > > > +			unsigned long duration_us)
> > > > > > +{
> > > > > > +	int ret;
> > > > > > +	struct i2c_client *client = data->client;
> > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > SGP_CRC8_LEN);
> > > > > > +	u8 *data_buf;
> > > > > > +
> > > > > > +	ret = i2c_master_send(client, (const char *)&cmd,
> > > > > > SGP_CMD_LEN);
> > > > > > +	if (ret != SGP_CMD_LEN)
> > > > > > +		return -EIO;
> > > > > > +	usleep_range(duration_us, duration_us + 1000);
> > > > > > +
> > > > > > +	if (word_count == 0)
> > > > > > +		return 0;
> > > > > > +
> > > > > > +	data_buf = &buf->start;
> > > > > > +	ret = i2c_master_recv(client, data_buf, size);
> > > > > > +	if (ret < 0)
> > > > > > +		return ret;
> > > > > > +	if (ret != size)
> > > > > > +		return -EIO;
> > > > > > +
> > > > > > +	return sgp_verify_buffer(data, buf, word_count);
> > > > > > +}
> > > > > > +
> > > > > > +/**
> > > > > > + * sgp_measure_iaq() - measure and retrieve IAQ values
> > > > > > from sensor
> > > > > > + * The caller must hold data->data_lock for the duration
> > > > > > of the
> > > > > > call.
> > > > > > + * @data:       SGP data
> > > > > > + *
> > > > > > + * Return:      0 on success, -EBUSY on default values,
> > > > > > negative
> > > > > > error
> > > > > > + *              otherwise.
> > > > > > + */
> > > > > > +
> > > > > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > > > > +{
> > > > > > +	int ret;
> > > > > > +	/* data contains default values */
> > > > > > +	bool default_vals = !time_after(jiffies, data-  
> > > > > > > iaq_init_start_jiffies +  
> > > > > > 
> > > > > > +						 data-  
> > > > > > > iaq_defval_skip_jiffies);  
> > > > > > 
> > > > > > +
> > > > > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd,
> > > > > > &data-  
> > > > > > > iaq_buffer,  
> > > > > > 
> > > > > > +			   SGP_MEASUREMENT_LEN,
> > > > > > SGP_MEASUREMENT_DURATION_US);
> > > > > > +	if (ret < 0)
> > > > > > +		return ret;
> > > > > > +
> > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > > > > > +
> > > > > > +	if (default_vals)
> > > > > > +		return -EBUSY;
> > > > > > +
> > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static void sgp_iaq_thread_sleep_until(const struct
> > > > > > sgp_data
> > > > > > *data,
> > > > > > +				       unsigned long
> > > > > > sleep_jiffies)
> > > > > > +{
> > > > > > +	const long IAQ_POLL = 50000;
> > > > > > +
> > > > > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > > > > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > > > > > +		if (kthread_should_stop() || data-  
> > > > > > > iaq_init_start_jiffies == 0)  
> > > > > > 
> > > > > > +			return;
> > > > > > +	}
> > > > > > +}
> > > > > > +
> > > > > > +static int sgp_iaq_threadfn(void *p)
> > > > > > +{
> > > > > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > > > > +	unsigned long next_update_jiffies;
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	while (!kthread_should_stop()) {
> > > > > > +		mutex_lock(&data->data_lock);
> > > > > > +		if (data->iaq_init_start_jiffies == 0) {
> > > > > > +			ret = sgp_read_cmd(data, data-
> > > > > > >iaq_init_cmd,
> > > > > > NULL, 0,
> > > > > > +					   SGP_CMD_DURATION_US)
> > > > > > ;
> > > > > > +			if (ret < 0)
> > > > > > +				goto unlock_sleep_continue;
> > > > > > +			data->iaq_init_start_jiffies = jiffies;
> > > > > > +		}
> > > > > > +
> > > > > > +		ret = sgp_measure_iaq(data);
> > > > > > +		if (ret && ret != -EBUSY) {
> > > > > > +			dev_warn(&data->client->dev,
> > > > > > +				 "IAQ measurement error
> > > > > > [%d]\n", ret);
> > > > > > +		}
> > > > > > +unlock_sleep_continue:
> > > > > > +		next_update_jiffies = jiffies + data-  
> > > > > > > measure_interval_jiffies;  
> > > > > > 
> > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > +		sgp_iaq_thread_sleep_until(data,
> > > > > > next_update_jiffies);
> > > > > > +	}
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > > > > +			struct iio_chan_spec const *chan, int
> > > > > > *val,
> > > > > > +			int *val2, long mask)
> > > > > > +{
> > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > +	struct sgp_crc_word *words;
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	switch (mask) {
> > > > > > +	case IIO_CHAN_INFO_PROCESSED:
> > > > > > +		mutex_lock(&data->data_lock);
> > > > > > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID)
> > > > > > {
> > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > +			return -EBUSY;
> > > > > > +		}
> > > > > > +		words = data->iaq_buffer.raw_words;
> > > > > > +		switch (chan->address) {
> > > > > > +		case SGP30_IAQ_TVOC_IDX:
> > > > > > +		case SGPC3_IAQ_TVOC_IDX:
> > > > > > +			*val = 0;
> > > > > > +			*val2 = be16_to_cpu(words[1].value);
> > > > > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > > > > +			break;
> > > > > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > > > > +			*val = 0;
> > > > > > +			*val2 = be16_to_cpu(words[0].value);
> > > > > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > > > > +			break;
> > > > > > +		default:
> > > > > > +			ret = -EINVAL;
> > > > > > +			break;
> > > > > > +		}
> > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > +		break;
> > > > > > +	case IIO_CHAN_INFO_RAW:
> > > > > > +		mutex_lock(&data->data_lock);
> > > > > > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > > > > > +			if (data->iaq_buffer_state ==
> > > > > > IAQ_BUFFER_EMPTY)
> > > > > > +				ret = -EBUSY;
> > > > > > +			else
> > > > > > +				ret = 0;
> > > > > > +			words = data->iaq_buffer.raw_words;
> > > > > > +		} else {
> > > > > > +			ret = sgp_read_cmd(data, data-  
> > > > > > > measure_gas_signals_cmd,  
> > > > > > 
> > > > > > +					   &data->buffer,
> > > > > > SGP_MEASUREMENT_LEN,
> > > > > > +					   SGP_MEASUREMENT_DURA
> > > > > > TION_US)
> > > > > > ;
> > > > > > +			words = data->buffer.raw_words;
> > > > > > +		}
> > > > > > +		if (ret) {
> > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > +			return ret;
> > > > > > +		}
> > > > > > +
> > > > > > +		switch (chan->address) {
> > > > > > +		case SGP30_SIG_ETOH_IDX:
> > > > > > +			*val = be16_to_cpu(words[1].value);
> > > > > > +			ret = IIO_VAL_INT;
> > > > > > +			break;
> > > > > > +		case SGPC3_SIG_ETOH_IDX:
> > > > > > +		case SGP30_SIG_H2_IDX:
> > > > > > +			*val = be16_to_cpu(words[0].value);
> > > > > > +			ret = IIO_VAL_INT;
> > > > > > +			break;
> > > > > > +		default:
> > > > > > +			ret = -EINVAL;
> > > > > > +			break;
> > > > > > +		}
> > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > +		break;
> > > > > > +	default:
> > > > > > +		return -EINVAL;
> > > > > > +	}
> > > > > > +
> > > > > > +	return ret;
> > > > > > +}
> > > > > > +
> > > > > > +static int sgp_check_compat(struct sgp_data *data,
> > > > > > +			    unsigned int product_id)
> > > > > > +{
> > > > > > +	const struct sgp_version *supported_versions;
> > > > > > +	u16 ix, num_fs;
> > > > > > +	u16 product, generation, major, minor;
> > > > > > +
> > > > > > +	/* driver does not match product */
> > > > > > +	generation = SGP_VERS_GEN(data);
> > > > > > +	if (generation != 0) {
> > > > > > +		dev_err(&data->client->dev,
> > > > > > +			"incompatible product generation %d !=
> > > > > > 0",
> > > > > > generation);
> > > > > > +		return -ENODEV;
> > > > > > +	}
> > > > > > +
> > > > > > +	product = SGP_VERS_PRODUCT(data);
> > > > > > +	if (product != product_id) {
> > > > > > +		dev_err(&data->client->dev,
> > > > > > +			"sensor reports a different product:
> > > > > > 0x%04hx\n",
> > > > > > +			product);
> > > > > > +		return -ENODEV;
> > > > > > +	}
> > > > > > +
> > > > > > +	if (SGP_VERS_RESERVED(data))
> > > > > > +		dev_warn(&data->client->dev, "reserved bit is
> > > > > > set\n");
> > > > > > +
> > > > > > +	/* engineering samples are not supported: no interface
> > > > > > guarantees */
> > > > > > +	if (SGP_VERS_ENG_BIT(data))
> > > > > > +		return -ENODEV;
> > > > > > +
> > > > > > +	switch (product) {
> > > > > > +	case SGP30:
> > > > > > +		supported_versions = supported_versions_sgp30;
> > > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > > > > > +		break;
> > > > > > +	case SGPC3:
> > > > > > +		supported_versions = supported_versions_sgpc3;
> > > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > > > > > +		break;
> > > > > > +	default:
> > > > > > +		return -ENODEV;
> > > > > > +	}
> > > > > > +
> > > > > > +	major = SGP_VERS_MAJOR(data);
> > > > > > +	minor = SGP_VERS_MINOR(data);
> > > > > > +	for (ix = 0; ix < num_fs; ix++) {
> > > > > > +		if (major == supported_versions[ix].major &&
> > > > > > +		    minor >= supported_versions[ix].minor)
> > > > > > +			return 0;
> > > > > > +	}
> > > > > > +	dev_err(&data->client->dev, "unsupported sgp version:
> > > > > > %d.%d\n",
> > > > > > +		major, minor);
> > > > > > +
> > > > > > +	return -ENODEV;
> > > > > > +}
> > > > > > +
> > > > > > +static void sgp_init(struct sgp_data *data)
> > > > > > +{
> > > > > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > > > > +	data->iaq_init_start_jiffies = 0;
> > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > > > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > > > > +	case SGP30:
> > > > > > +		data->measure_interval_jiffies =
> > > > > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > > > > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > > > > > +		data->measure_gas_signals_cmd =
> > > > > > SGP30_CMD_MEASURE_SIGNAL;
> > > > > > +		data->product_id = SGP30;
> > > > > > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > > > > > +		break;
> > > > > > +	case SGPC3:
> > > > > > +		data->measure_interval_jiffies =
> > > > > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > > > > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > > > +		data->measure_gas_signals_cmd =
> > > > > > SGPC3_CMD_MEASURE_RAW;
> > > > > > +		data->product_id = SGPC3;
> > > > > > +		data->iaq_defval_skip_jiffies =
> > > > > > +			43 * data->measure_interval_jiffies;
> > > > > > +		break;
> > > > > > +	};
> > > > > > +}
> > > > > > +
> > > > > > +static const struct iio_info sgp_info = {
> > > > > > +	.read_raw	= sgp_read_raw,
> > > > > > +};
> > > > > > +
> > > > > > +static const struct of_device_id sgp_dt_ids[] = {
> > > > > > +	{ .compatible = "sensirion,sgp30", .data = (void
> > > > > > *)SGP30 },
> > > > > > +	{ .compatible = "sensirion,sgpc3", .data = (void
> > > > > > *)SGPC3 },
> > > > > > +	{ }
> > > > > > +};
> > > > > > +
> > > > > > +static int sgp_probe(struct i2c_client *client,
> > > > > > +		     const struct i2c_device_id *id)
> > > > > > +{
> > > > > > +	struct iio_dev *indio_dev;
> > > > > > +	struct sgp_data *data;
> > > > > > +	const struct of_device_id *of_id;
> > > > > > +	unsigned long product_id;
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	indio_dev = devm_iio_device_alloc(&client->dev,
> > > > > > sizeof(*data));
> > > > > > +	if (!indio_dev)
> > > > > > +		return -ENOMEM;
> > > > > > +
> > > > > > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > > > > > +	if (of_id)
> > > > > > +		product_id = (unsigned long)of_id->data;
> > > > > > +	else
> > > > > > +		product_id = id->driver_data;
> > > > > > +
> > > > > > +	data = iio_priv(indio_dev);
> > > > > > +	i2c_set_clientdata(client, indio_dev);
> > > > > > +	data->client = client;
> > > > > > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > > > > > +	mutex_init(&data->data_lock);
> > > > > > +
> > > > > > +	/* get feature set version and write it to client data
> > > > > > */
> > > > > > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET,
> > > > > > &data-  
> > > > > > > buffer, 1,  
> > > > > > 
> > > > > > +			   SGP_CMD_DURATION_US);
> > > > > > +	if (ret < 0)
> > > > > > +		return ret;
> > > > > > +
> > > > > > +	data->feature_set = be16_to_cpu(data-  
> > > > > > > buffer.raw_words[0].value);  
> > > > > > 
> > > > > > +
> > > > > > +	ret = sgp_check_compat(data, product_id);
> > > > > > +	if (ret)
> > > > > > +		return ret;
> > > > > > +
> > > > > > +	indio_dev->dev.parent = &client->dev;
> > > > > > +	indio_dev->info = &sgp_info;
> > > > > > +	indio_dev->name = id->name;
> > > > > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > > +	indio_dev->channels = sgp_devices[product_id].channels;
> > > > > > +	indio_dev->num_channels =
> > > > > > sgp_devices[product_id].num_channels;
> > > > > > +
> > > > > > +	sgp_init(data);
> > > > > > +
> > > > > > +	ret = devm_iio_device_register(&client->dev,
> > > > > > indio_dev);
> > > > > > +	if (ret) {
> > > > > > +		dev_err(&client->dev, "failed to register iio
> > > > > > device\n");
> > > > > > +		return ret;
> > > > > > +	}
> > > > > > +
> > > > > > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > > > > > +				       "%s-iaq", data->client-
> > > > > > >name);
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int sgp_remove(struct i2c_client *client)
> > > > > > +{
> > > > > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > +
> > > > > > +	if (data->iaq_thread)
> > > > > > +		kthread_stop(data->iaq_thread);
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct i2c_device_id sgp_id[] = {
> > > > > > +	{ "sgp30", SGP30 },
> > > > > > +	{ "sgpc3", SGPC3 },
> > > > > > +	{ }
> > > > > > +};
> > > > > > +
> > > > > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > > > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > > > > +
> > > > > > +static struct i2c_driver sgp_driver = {
> > > > > > +	.driver = {
> > > > > > +		.name = "sgp30",
> > > > > > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > > > > > +	},
> > > > > > +	.probe = sgp_probe,
> > > > > > +	.remove = sgp_remove,
> > > > > > +	.id_table = sgp_id,
> > > > > > +};
> > > > > > +module_i2c_driver(sgp_driver);
> > > > > > +
> > > > > > +MODULE_AUTHOR("Andreas Brauchli <
> > > > > > andreas.brauchli@sensirion.com>")
> > > > > > ;
> > > > > > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>")
> > > > > > ;
> > > > > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > > > > +MODULE_LICENSE("GPL v2");  
> > > > > 
> > > > >  
> > > > 
> > > >  
> > > 
> > >  
> 
>
Jonathan Cameron March 9, 2019, 5:02 p.m. UTC | #7
On Thu, 07 Mar 2019 21:34:12 +0100
Andreas Brauchli <a.brauchli@elementarea.net> wrote:

> On Sat, 2018-12-22 at 16:56 +0000, Jonathan Cameron wrote:
> > On Tue, 18 Dec 2018 18:44:40 +0100
> > Tomasz Duszynski <tduszyns@gmail.com> wrote:
> >   
> > > On Mon, Dec 17, 2018 at 11:59:36AM +0000, Jonathan Cameron wrote:  
> > > > On Sun, 16 Dec 2018 17:38:18 +0100
> > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > >    
> > > > > On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron wrote:    
> > > > > > On Thu, 13 Dec 2018 15:43:23 +0100
> > > > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > > > >    
> > > > > > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas
> > > > > > > sensors
> > > > > > > 
> > > > > > > Supported Features:
> > > > > > > 
> > > > > > > * Indoor Air Quality (IAQ) concentrations for
> > > > > > >   - tVOC (in_concentration_voc_input)
> > > > > > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > > > > > 
> > > > > > >   IAQ concentrations are periodically read out by a
> > > > > > > background
> > > > > > > thread
> > > > > > >   to allow the sensor to maintain its internal baseline.
> > > > > > > 
> > > > > > > * Gas concentration signals
> > > > > > >   - Ethanol (in_concentration_ethanol_raw)
> > > > > > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > > > > > 
> > > > > > > https://www.sensirion.com/file/datasheet_sgp30
> > > > > > > https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > > 
> > > > > > > Signed-off-by: Andreas Brauchli <  
> > > > > > > andreas.brauchli@sensirion.com>    
> > > > > > 
> > > > > > Why do we provide endianness info given we don't provide the
> > > > > > buffered
> > > > > > interface?  It's only used when we do.    
> > > > > 
> > > > > Makes sense but I wasn't aware of it. The initial submission
> > > > > came with
> > > > > buffering, so it probably wasn't spotted in v2.
> > > > >    
> > > > > > 
> > > > > > Some over the top line wrapping as well.  However as that's
> > > > > > it
> > > > > > I'll just clean up whilst applying.  If I've missed something
> > > > > > odd
> > > > > > around the endian thing shout!    
> > > > > 
> > > > > No that's it, thanks a lot.
> > > > >    
> > > > > > 
> > > > > > Jonathan
> > > > > >    
> > > > > > > ---
> > > > > > >  drivers/iio/chemical/Kconfig  |  13 +  
> 
> Apologies for noticing so late, but I fear that the Kconfig part might
> have been lost.
> 
> It's not in the upstream commit
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.0&id=ce514124161ac2ceb13d10b6c40cbf05c8f0cc91
> nor in the testing branch (togreg is already removed)
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/tree/drivers/iio/chemical/Kconfig?h=testing

Sorry about this.  I'll put together a patch to fix it up as it's
a simple case of adding the missing Kconfig block, I've applied it
directly to the fixes-togreg branch of iio.git with your reported-by
added.  If you could sanity check that it would be great.
I'll push out as soon as my local build tests finish.

This will have to wait for the merge window to close, but that should
be in about a week so not to bad.

Sorry again, clearly messed this one up!

Jonathan

> 
> > > > > > >  drivers/iio/chemical/Makefile |   1 +
> > > > > > >  drivers/iio/chemical/sgp30.c  | 603
> > > > > > > ++++++++++++++++++++++++++++++++++
> > > > > > >  3 files changed, 617 insertions(+)
> > > > > > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > > > > > 
> > > > > > > diff --git a/drivers/iio/chemical/Kconfig
> > > > > > > b/drivers/iio/chemical/Kconfig
> > > > > > > index b8e005be4f87..b0c912be94a9 100644
> > > > > > > --- a/drivers/iio/chemical/Kconfig
> > > > > > > +++ b/drivers/iio/chemical/Kconfig
> > > > > > > @@ -61,6 +61,19 @@ config IAQCORE
> > > > > > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic
> > > > > > > Compounds)
> > > > > > >  	  sensors
> > > > > > > 
> > > > > > > +config SENSIRION_SGP30    
> > > > > 
> > > > > I noticed that in Tomasz's SPS30 patch it's just SPS30, so for
> > > > > consistency's sake I'm fine with dropping the branding. Up to
> > > > > you.    
> > > > 
> > > > We've never had any hard rules on this, at least partly because a
> > > > lot
> > > > of drivers came from other subsystems in the early days.
> > > > 
> > > > We probably should have a rule though.  SGP30 for example is
> > > > generic
> > > > enough that it might well be reused by someone else.
> > > >    
> > > 
> > > Wondering how likely is this? These days some popular sensors have
> > > their
> > > clones. Interestingly enough, they are sold as genuine i.e
> > > without vendor/sensor name changes. On the other hand there are
> > > very
> > > same ICs manufactured by different companies but still with
> > > different names.
> > >   
> > > > Anyone have any strong opinions on this?  If not I think I'll
> > > > start
> > > > encouraging prefixing with manufacturer of first supported
> > > > device.
> > > >    
> > > 
> > > What about sticking to what we have now and adding prefix when we
> > > do
> > > have naming collision? Just my 2 cents.
> > >   
> > 
> > Agreed in the sense that it's not worth changing existing drivers
> > unless
> > we have a reason to..
> > 
> > But if the question is raised for what is preferred, I think adding a
> > vendor
> > is good.  There have been clashes with i2c devices in the past where
> > the
> > binding without vendor was insufficient to distinguish the part.
> > 
> > Not sure what it was, but I remember the discussion being one of the
> > motivations
> > to add vendor prefixes to the look up for i2c devices.
> > 
> > Jonathan
> >   
> > > > Jonathan
> > > >    
> > > > >    
> > > > > > > +	tristate "Sensirion SGPxx gas sensors"
> > > > > > > +	depends on I2C
> > > > > > > +	select CRC8
> > > > > > > +	help
> > > > > > > +	  Say Y here to build I2C interface support for the
> > > > > > > following
> > > > > > > +	  Sensirion SGP gas sensors:
> > > > > > > +	    * SGP30 gas sensor
> > > > > > > +	    * SGPC3 low power gas sensor
> > > > > > > +
> > > > > > > +	  To compile this driver as module, choose M here: the
> > > > > > > +	  module will be called sgp30.
> > > > > > > +
> > > > > > >  config VZ89X
> > > > > > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > > > > > >  	depends on I2C
> > > > > > > diff --git a/drivers/iio/chemical/Makefile
> > > > > > > b/drivers/iio/chemical/Makefile
> > > > > > > index 2f4c4ba4d781..61e83944db1a 100644
> > > > > > > --- a/drivers/iio/chemical/Makefile
> > > > > > > +++ b/drivers/iio/chemical/Makefile
> > > > > > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
> > > > > > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > > > > > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > > > > > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > > > > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > > > > > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > > > > > diff --git a/drivers/iio/chemical/sgp30.c
> > > > > > > b/drivers/iio/chemical/sgp30.c
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..90eb4cbb18cf
> > > > > > > --- /dev/null
> > > > > > > +++ b/drivers/iio/chemical/sgp30.c
> > > > > > > @@ -0,0 +1,603 @@
> > > > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > > > +/*
> > > > > > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > > > > > + *
> > > > > > > + * Copyright (C) 2018 Andreas Brauchli <    
> > > > > > > andreas.brauchli@sensirion.com>    
> > > > > > > + *
> > > > > > > + * I2C slave address: 0x58
> > > > > > > + *
> > > > > > > + * Datasheets:
> > > > > > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > > > > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > > + *
> > > > > > > + * TODO:
> > > > > > > + * - baseline support
> > > > > > > + * - humidity compensation
> > > > > > > + * - power mode switching (SGPC3)
> > > > > > > + */
> > > > > > > +
> > > > > > > +#include <linux/crc8.h>
> > > > > > > +#include <linux/delay.h>
> > > > > > > +#include <linux/kthread.h>
> > > > > > > +#include <linux/module.h>
> > > > > > > +#include <linux/mutex.h>
> > > > > > > +#include <linux/i2c.h>
> > > > > > > +#include <linux/of_device.h>
> > > > > > > +#include <linux/iio/iio.h>
> > > > > > > +#include <linux/iio/sysfs.h>
> > > > > > > +
> > > > > > > +#define SGP_WORD_LEN				2
> > > > > > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > > > > > +#define SGP_CRC8_INIT				0xff
> > > > > > > +#define SGP_CRC8_LEN				1
> > > > > > > +#define SGP_CMD(cmd_word)			cpu_to_be16(cmd
> > > > > > > _word)
> > > > > > > +#define SGP_CMD_DURATION_US			12000
> > > > > > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > > > > > +#define SGP_CMD_LEN				SGP_WOR
> > > > > > > D_LEN
> > > > > > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CM
> > > > > > > D_LEN +
> > > > > > > 2 * SGP_WORD_LEN)
> > > > > > > +#define SGP_MEASUREMENT_LEN			2
> > > > > > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > > > > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > > > > > +#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) 
> > > > > > > &
> > > > > > > 0xf000) >> 12)
> > > > > > > +#define SGP_VERS_RESERVED(data)	((((data)->feature_set) 
> > > > > > > &
> > > > > > > 0x0800) >> 11)
> > > > > > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) &
> > > > > > > 0x0600) >> 9)
> > > > > > > +#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) 
> > > > > > > &
> > > > > > > 0x0100) >> 8)
> > > > > > > +#define SGP_VERS_MAJOR(data)	((((data)->feature_set) 
> > > > > > > &
> > > > > > > 0x00e0) >> 5)
> > > > > > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set)
> > > > > > > &
> > > > > > > 0x001f)
> > > > > > > +
> > > > > > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > > > > > +
> > > > > > > +enum sgp_product_id {
> > > > > > > +	SGP30 = 0,
> > > > > > > +	SGPC3,
> > > > > > > +};
> > > > > > > +
> > > > > > > +enum sgp30_channel_idx {
> > > > > > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > > > > > +	SGP30_IAQ_CO2EQ_IDX,
> > > > > > > +	SGP30_SIG_ETOH_IDX,
> > > > > > > +	SGP30_SIG_H2_IDX,
> > > > > > > +};
> > > > > > > +
> > > > > > > +enum sgpc3_channel_idx {
> > > > > > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > > > > > +	SGPC3_SIG_ETOH_IDX,
> > > > > > > +};
> > > > > > > +
> > > > > > > +enum sgp_cmd {
> > > > > > > +	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
> > > > > > > +	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
> > > > > > > +	SGP_CMD_GET_FEATURE_SET			=
> > > > > > > SGP_CMD(0x202f),
> > > > > > > +	SGP_CMD_GET_SERIAL_ID			=
> > > > > > > SGP_CMD(0x3682),
> > > > > > > +
> > > > > > > +	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
> > > > > > > +
> > > > > > > +	SGPC3_CMD_MEASURE_RAW			=
> > > > > > > SGP_CMD(0x2046),
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct sgp_version {
> > > > > > > +	u8 major;
> > > > > > > +	u8 minor;
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct sgp_crc_word {
> > > > > > > +	__be16 value;
> > > > > > > +	u8 crc8;
> > > > > > > +} __attribute__((__packed__));
> > > > > > > +
> > > > > > > +union sgp_reading {
> > > > > > > +	u8 start;
> > > > > > > +	struct sgp_crc_word raw_words[4];
> > > > > > > +};
> > > > > > > +
> > > > > > > +enum _iaq_buffer_state {
> > > > > > > +	IAQ_BUFFER_EMPTY = 0,
> > > > > > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > > > > > +	IAQ_BUFFER_VALID,
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct sgp_data {
> > > > > > > +	struct i2c_client *client;
> > > > > > > +	struct task_struct *iaq_thread;
> > > > > > > +	struct mutex data_lock;
> > > > > > > +	unsigned long iaq_init_start_jiffies;
> > > > > > > +	unsigned long iaq_defval_skip_jiffies;
> > > > > > > +	u16 product_id;
> > > > > > > +	u16 feature_set;
> > > > > > > +	unsigned long measure_interval_jiffies;
> > > > > > > +	enum sgp_cmd iaq_init_cmd;
> > > > > > > +	enum sgp_cmd measure_iaq_cmd;
> > > > > > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > > > > > +	union sgp_reading buffer;
> > > > > > > +	union sgp_reading iaq_buffer;
> > > > > > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct sgp_device {
> > > > > > > +	const struct iio_chan_spec *channels;
> > > > > > > +	int num_channels;
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct sgp_version supported_versions_sgp30[]
> > > > > > > = {
> > > > > > > +	{
> > > > > > > +		.major = 1,
> > > > > > > +		.minor = 0,
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct sgp_version supported_versions_sgpc3[]
> > > > > > > = {
> > > > > > > +	{
> > > > > > > +		.major = 0,
> > > > > > > +		.minor = 4,
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > > > > > +	},
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_CO2,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > > > > > +	},
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > 
> > > > > > Definitely looks like it'll fit in under 80 chars.
> > > > > >    
> > > > > > > +		.address = SGP30_SIG_ETOH_IDX,
> > > > > > > +		.scan_type = {
> > > > > > > +			.endianness = IIO_BE,
> > > > > > > +		},
> > > > > > > +	},
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_H2,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > 
> > > > > > Same here on length.
> > > > > >    
> > > > > > > +		.address = SGP30_SIG_H2_IDX,
> > > > > > > +		.scan_type = {
> > > > > > > +			.endianness = IIO_BE,
> > > > > > > +		},
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > > > > > +	},
> > > > > > > +	{
> > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > > +		.modified = 1,
> > > > > > > +		.info_mask_separate =
> > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > 
> > > > > > And another on length.    
> > > > > > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > > > > > +		.scan_type = {
> > > > > > > +			.endianness = IIO_BE,
> > > > > > > +		},
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct sgp_device sgp_devices[] = {
> > > > > > > +	[SGP30] = {
> > > > > > > +		.channels = sgp30_channels,
> > > > > > > +		.num_channels = ARRAY_SIZE(sgp30_channels),
> > > > > > > +	},
> > > > > > > +	[SGPC3] = {
> > > > > > > +		.channels = sgpc3_channels,
> > > > > > > +		.num_channels = ARRAY_SIZE(sgpc3_channels),
> > > > > > > +	},
> > > > > > > +};
> > > > > > > +
> > > > > > > +/**
> > > > > > > + * sgp_verify_buffer() - verify the checksums of the data
> > > > > > > buffer
> > > > > > > words
> > > > > > > + *
> > > > > > > + * @data:       SGP data
> > > > > > > + * @buf:        Raw data buffer
> > > > > > > + * @word_count: Num data words stored in the buffer,
> > > > > > > excluding CRC
> > > > > > > bytes
> > > > > > > + *
> > > > > > > + * Return:      0 on success, negative error otherwise.
> > > > > > > + */
> > > > > > > +static int sgp_verify_buffer(const struct sgp_data *data,
> > > > > > > +			     union sgp_reading *buf, size_t
> > > > > > > word_count)
> > > > > > > +{
> > > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > > SGP_CRC8_LEN);
> > > > > > > +	int i;
> > > > > > > +	u8 crc;
> > > > > > > +	u8 *data_buf = &buf->start;
> > > > > > > +
> > > > > > > +	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN)
> > > > > > > {
> > > > > > > +		crc = crc8(sgp_crc8_table, &data_buf[i],
> > > > > > > SGP_WORD_LEN,
> > > > > > > +			   SGP_CRC8_INIT);
> > > > > > > +		if (crc != data_buf[i + SGP_WORD_LEN]) {
> > > > > > > +			dev_err(&data->client->dev, "CRC
> > > > > > > error\n");
> > > > > > > +			return -EIO;
> > > > > > > +		}
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +/**
> > > > > > > + * sgp_read_cmd() - reads data from sensor after issuing a
> > > > > > > command
> > > > > > > + * The caller must hold data->data_lock for the duration
> > > > > > > of the
> > > > > > > call.
> > > > > > > + * @data:        SGP data
> > > > > > > + * @cmd:         SGP Command to issue
> > > > > > > + * @buf:         Raw data buffer to use
> > > > > > > + * @word_count:  Num words to read, excluding CRC bytes
> > > > > > > + *
> > > > > > > + * Return:       0 on success, negative error otherwise.
> > > > > > > + */
> > > > > > > +static int sgp_read_cmd(struct sgp_data *data, enum
> > > > > > > sgp_cmd cmd,
> > > > > > > +			union sgp_reading *buf, size_t
> > > > > > > word_count,
> > > > > > > +			unsigned long duration_us)
> > > > > > > +{
> > > > > > > +	int ret;
> > > > > > > +	struct i2c_client *client = data->client;
> > > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > > SGP_CRC8_LEN);
> > > > > > > +	u8 *data_buf;
> > > > > > > +
> > > > > > > +	ret = i2c_master_send(client, (const char *)&cmd,
> > > > > > > SGP_CMD_LEN);
> > > > > > > +	if (ret != SGP_CMD_LEN)
> > > > > > > +		return -EIO;
> > > > > > > +	usleep_range(duration_us, duration_us + 1000);
> > > > > > > +
> > > > > > > +	if (word_count == 0)
> > > > > > > +		return 0;
> > > > > > > +
> > > > > > > +	data_buf = &buf->start;
> > > > > > > +	ret = i2c_master_recv(client, data_buf, size);
> > > > > > > +	if (ret < 0)
> > > > > > > +		return ret;
> > > > > > > +	if (ret != size)
> > > > > > > +		return -EIO;
> > > > > > > +
> > > > > > > +	return sgp_verify_buffer(data, buf, word_count);
> > > > > > > +}
> > > > > > > +
> > > > > > > +/**
> > > > > > > + * sgp_measure_iaq() - measure and retrieve IAQ values
> > > > > > > from sensor
> > > > > > > + * The caller must hold data->data_lock for the duration
> > > > > > > of the
> > > > > > > call.
> > > > > > > + * @data:       SGP data
> > > > > > > + *
> > > > > > > + * Return:      0 on success, -EBUSY on default values,
> > > > > > > negative
> > > > > > > error
> > > > > > > + *              otherwise.
> > > > > > > + */
> > > > > > > +
> > > > > > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > > > > > +{
> > > > > > > +	int ret;
> > > > > > > +	/* data contains default values */
> > > > > > > +	bool default_vals = !time_after(jiffies, data-    
> > > > > > > > iaq_init_start_jiffies +    
> > > > > > > 
> > > > > > > +						 data-    
> > > > > > > > iaq_defval_skip_jiffies);    
> > > > > > > 
> > > > > > > +
> > > > > > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd,
> > > > > > > &data-    
> > > > > > > > iaq_buffer,    
> > > > > > > 
> > > > > > > +			   SGP_MEASUREMENT_LEN,
> > > > > > > SGP_MEASUREMENT_DURATION_US);
> > > > > > > +	if (ret < 0)
> > > > > > > +		return ret;
> > > > > > > +
> > > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
> > > > > > > +
> > > > > > > +	if (default_vals)
> > > > > > > +		return -EBUSY;
> > > > > > > +
> > > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static void sgp_iaq_thread_sleep_until(const struct
> > > > > > > sgp_data
> > > > > > > *data,
> > > > > > > +				       unsigned long
> > > > > > > sleep_jiffies)
> > > > > > > +{
> > > > > > > +	const long IAQ_POLL = 50000;
> > > > > > > +
> > > > > > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > > > > > +		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
> > > > > > > +		if (kthread_should_stop() || data-    
> > > > > > > > iaq_init_start_jiffies == 0)    
> > > > > > > 
> > > > > > > +			return;
> > > > > > > +	}
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int sgp_iaq_threadfn(void *p)
> > > > > > > +{
> > > > > > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > > > > > +	unsigned long next_update_jiffies;
> > > > > > > +	int ret;
> > > > > > > +
> > > > > > > +	while (!kthread_should_stop()) {
> > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > +		if (data->iaq_init_start_jiffies == 0) {
> > > > > > > +			ret = sgp_read_cmd(data, data-  
> > > > > > > >iaq_init_cmd,  
> > > > > > > NULL, 0,
> > > > > > > +					   SGP_CMD_DURATION_US)
> > > > > > > ;
> > > > > > > +			if (ret < 0)
> > > > > > > +				goto unlock_sleep_continue;
> > > > > > > +			data->iaq_init_start_jiffies = jiffies;
> > > > > > > +		}
> > > > > > > +
> > > > > > > +		ret = sgp_measure_iaq(data);
> > > > > > > +		if (ret && ret != -EBUSY) {
> > > > > > > +			dev_warn(&data->client->dev,
> > > > > > > +				 "IAQ measurement error
> > > > > > > [%d]\n", ret);
> > > > > > > +		}
> > > > > > > +unlock_sleep_continue:
> > > > > > > +		next_update_jiffies = jiffies + data-    
> > > > > > > > measure_interval_jiffies;    
> > > > > > > 
> > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > +		sgp_iaq_thread_sleep_until(data,
> > > > > > > next_update_jiffies);
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > > > > > +			struct iio_chan_spec const *chan, int
> > > > > > > *val,
> > > > > > > +			int *val2, long mask)
> > > > > > > +{
> > > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > > +	struct sgp_crc_word *words;
> > > > > > > +	int ret;
> > > > > > > +
> > > > > > > +	switch (mask) {
> > > > > > > +	case IIO_CHAN_INFO_PROCESSED:
> > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > +		if (data->iaq_buffer_state != IAQ_BUFFER_VALID)
> > > > > > > {
> > > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > > +			return -EBUSY;
> > > > > > > +		}
> > > > > > > +		words = data->iaq_buffer.raw_words;
> > > > > > > +		switch (chan->address) {
> > > > > > > +		case SGP30_IAQ_TVOC_IDX:
> > > > > > > +		case SGPC3_IAQ_TVOC_IDX:
> > > > > > > +			*val = 0;
> > > > > > > +			*val2 = be16_to_cpu(words[1].value);
> > > > > > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > > > > > +			break;
> > > > > > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > > > > > +			*val = 0;
> > > > > > > +			*val2 = be16_to_cpu(words[0].value);
> > > > > > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > > > > > +			break;
> > > > > > > +		default:
> > > > > > > +			ret = -EINVAL;
> > > > > > > +			break;
> > > > > > > +		}
> > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > +		break;
> > > > > > > +	case IIO_CHAN_INFO_RAW:
> > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > +		if (chan->address == SGPC3_SIG_ETOH_IDX) {
> > > > > > > +			if (data->iaq_buffer_state ==
> > > > > > > IAQ_BUFFER_EMPTY)
> > > > > > > +				ret = -EBUSY;
> > > > > > > +			else
> > > > > > > +				ret = 0;
> > > > > > > +			words = data->iaq_buffer.raw_words;
> > > > > > > +		} else {
> > > > > > > +			ret = sgp_read_cmd(data, data-    
> > > > > > > > measure_gas_signals_cmd,    
> > > > > > > 
> > > > > > > +					   &data->buffer,
> > > > > > > SGP_MEASUREMENT_LEN,
> > > > > > > +					   SGP_MEASUREMENT_DURA
> > > > > > > TION_US)
> > > > > > > ;
> > > > > > > +			words = data->buffer.raw_words;
> > > > > > > +		}
> > > > > > > +		if (ret) {
> > > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > > +			return ret;
> > > > > > > +		}
> > > > > > > +
> > > > > > > +		switch (chan->address) {
> > > > > > > +		case SGP30_SIG_ETOH_IDX:
> > > > > > > +			*val = be16_to_cpu(words[1].value);
> > > > > > > +			ret = IIO_VAL_INT;
> > > > > > > +			break;
> > > > > > > +		case SGPC3_SIG_ETOH_IDX:
> > > > > > > +		case SGP30_SIG_H2_IDX:
> > > > > > > +			*val = be16_to_cpu(words[0].value);
> > > > > > > +			ret = IIO_VAL_INT;
> > > > > > > +			break;
> > > > > > > +		default:
> > > > > > > +			ret = -EINVAL;
> > > > > > > +			break;
> > > > > > > +		}
> > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > +		break;
> > > > > > > +	default:
> > > > > > > +		return -EINVAL;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	return ret;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int sgp_check_compat(struct sgp_data *data,
> > > > > > > +			    unsigned int product_id)
> > > > > > > +{
> > > > > > > +	const struct sgp_version *supported_versions;
> > > > > > > +	u16 ix, num_fs;
> > > > > > > +	u16 product, generation, major, minor;
> > > > > > > +
> > > > > > > +	/* driver does not match product */
> > > > > > > +	generation = SGP_VERS_GEN(data);
> > > > > > > +	if (generation != 0) {
> > > > > > > +		dev_err(&data->client->dev,
> > > > > > > +			"incompatible product generation %d !=
> > > > > > > 0",
> > > > > > > generation);
> > > > > > > +		return -ENODEV;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	product = SGP_VERS_PRODUCT(data);
> > > > > > > +	if (product != product_id) {
> > > > > > > +		dev_err(&data->client->dev,
> > > > > > > +			"sensor reports a different product:
> > > > > > > 0x%04hx\n",
> > > > > > > +			product);
> > > > > > > +		return -ENODEV;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	if (SGP_VERS_RESERVED(data))
> > > > > > > +		dev_warn(&data->client->dev, "reserved bit is
> > > > > > > set\n");
> > > > > > > +
> > > > > > > +	/* engineering samples are not supported: no interface
> > > > > > > guarantees */
> > > > > > > +	if (SGP_VERS_ENG_BIT(data))
> > > > > > > +		return -ENODEV;
> > > > > > > +
> > > > > > > +	switch (product) {
> > > > > > > +	case SGP30:
> > > > > > > +		supported_versions = supported_versions_sgp30;
> > > > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgp30);
> > > > > > > +		break;
> > > > > > > +	case SGPC3:
> > > > > > > +		supported_versions = supported_versions_sgpc3;
> > > > > > > +		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
> > > > > > > +		break;
> > > > > > > +	default:
> > > > > > > +		return -ENODEV;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	major = SGP_VERS_MAJOR(data);
> > > > > > > +	minor = SGP_VERS_MINOR(data);
> > > > > > > +	for (ix = 0; ix < num_fs; ix++) {
> > > > > > > +		if (major == supported_versions[ix].major &&
> > > > > > > +		    minor >= supported_versions[ix].minor)
> > > > > > > +			return 0;
> > > > > > > +	}
> > > > > > > +	dev_err(&data->client->dev, "unsupported sgp version:
> > > > > > > %d.%d\n",
> > > > > > > +		major, minor);
> > > > > > > +
> > > > > > > +	return -ENODEV;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static void sgp_init(struct sgp_data *data)
> > > > > > > +{
> > > > > > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > > > > > +	data->iaq_init_start_jiffies = 0;
> > > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > > > > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > > > > > +	case SGP30:
> > > > > > > +		data->measure_interval_jiffies =
> > > > > > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > > > > > +		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
> > > > > > > +		data->measure_gas_signals_cmd =
> > > > > > > SGP30_CMD_MEASURE_SIGNAL;
> > > > > > > +		data->product_id = SGP30;
> > > > > > > +		data->iaq_defval_skip_jiffies = 15 * HZ;
> > > > > > > +		break;
> > > > > > > +	case SGPC3:
> > > > > > > +		data->measure_interval_jiffies =
> > > > > > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > > > > > +		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
> > > > > > > +		data->measure_gas_signals_cmd =
> > > > > > > SGPC3_CMD_MEASURE_RAW;
> > > > > > > +		data->product_id = SGPC3;
> > > > > > > +		data->iaq_defval_skip_jiffies =
> > > > > > > +			43 * data->measure_interval_jiffies;
> > > > > > > +		break;
> > > > > > > +	};
> > > > > > > +}
> > > > > > > +
> > > > > > > +static const struct iio_info sgp_info = {
> > > > > > > +	.read_raw	= sgp_read_raw,
> > > > > > > +};
> > > > > > > +
> > > > > > > +static const struct of_device_id sgp_dt_ids[] = {
> > > > > > > +	{ .compatible = "sensirion,sgp30", .data = (void
> > > > > > > *)SGP30 },
> > > > > > > +	{ .compatible = "sensirion,sgpc3", .data = (void
> > > > > > > *)SGPC3 },
> > > > > > > +	{ }
> > > > > > > +};
> > > > > > > +
> > > > > > > +static int sgp_probe(struct i2c_client *client,
> > > > > > > +		     const struct i2c_device_id *id)
> > > > > > > +{
> > > > > > > +	struct iio_dev *indio_dev;
> > > > > > > +	struct sgp_data *data;
> > > > > > > +	const struct of_device_id *of_id;
> > > > > > > +	unsigned long product_id;
> > > > > > > +	int ret;
> > > > > > > +
> > > > > > > +	indio_dev = devm_iio_device_alloc(&client->dev,
> > > > > > > sizeof(*data));
> > > > > > > +	if (!indio_dev)
> > > > > > > +		return -ENOMEM;
> > > > > > > +
> > > > > > > +	of_id = of_match_device(sgp_dt_ids, &client->dev);
> > > > > > > +	if (of_id)
> > > > > > > +		product_id = (unsigned long)of_id->data;
> > > > > > > +	else
> > > > > > > +		product_id = id->driver_data;
> > > > > > > +
> > > > > > > +	data = iio_priv(indio_dev);
> > > > > > > +	i2c_set_clientdata(client, indio_dev);
> > > > > > > +	data->client = client;
> > > > > > > +	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
> > > > > > > +	mutex_init(&data->data_lock);
> > > > > > > +
> > > > > > > +	/* get feature set version and write it to client data
> > > > > > > */
> > > > > > > +	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET,
> > > > > > > &data-    
> > > > > > > > buffer, 1,    
> > > > > > > 
> > > > > > > +			   SGP_CMD_DURATION_US);
> > > > > > > +	if (ret < 0)
> > > > > > > +		return ret;
> > > > > > > +
> > > > > > > +	data->feature_set = be16_to_cpu(data-    
> > > > > > > > buffer.raw_words[0].value);    
> > > > > > > 
> > > > > > > +
> > > > > > > +	ret = sgp_check_compat(data, product_id);
> > > > > > > +	if (ret)
> > > > > > > +		return ret;
> > > > > > > +
> > > > > > > +	indio_dev->dev.parent = &client->dev;
> > > > > > > +	indio_dev->info = &sgp_info;
> > > > > > > +	indio_dev->name = id->name;
> > > > > > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > > > +	indio_dev->channels = sgp_devices[product_id].channels;
> > > > > > > +	indio_dev->num_channels =
> > > > > > > sgp_devices[product_id].num_channels;
> > > > > > > +
> > > > > > > +	sgp_init(data);
> > > > > > > +
> > > > > > > +	ret = devm_iio_device_register(&client->dev,
> > > > > > > indio_dev);
> > > > > > > +	if (ret) {
> > > > > > > +		dev_err(&client->dev, "failed to register iio
> > > > > > > device\n");
> > > > > > > +		return ret;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
> > > > > > > +				       "%s-iaq", data->client-  
> > > > > > > >name);  
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int sgp_remove(struct i2c_client *client)
> > > > > > > +{
> > > > > > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > > +
> > > > > > > +	if (data->iaq_thread)
> > > > > > > +		kthread_stop(data->iaq_thread);
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static const struct i2c_device_id sgp_id[] = {
> > > > > > > +	{ "sgp30", SGP30 },
> > > > > > > +	{ "sgpc3", SGPC3 },
> > > > > > > +	{ }
> > > > > > > +};
> > > > > > > +
> > > > > > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > > > > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > > > > > +
> > > > > > > +static struct i2c_driver sgp_driver = {
> > > > > > > +	.driver = {
> > > > > > > +		.name = "sgp30",
> > > > > > > +		.of_match_table = of_match_ptr(sgp_dt_ids),
> > > > > > > +	},
> > > > > > > +	.probe = sgp_probe,
> > > > > > > +	.remove = sgp_remove,
> > > > > > > +	.id_table = sgp_id,
> > > > > > > +};
> > > > > > > +module_i2c_driver(sgp_driver);
> > > > > > > +
> > > > > > > +MODULE_AUTHOR("Andreas Brauchli <  
> > > > > > > andreas.brauchli@sensirion.com>")  
> > > > > > > ;
> > > > > > > +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>")
> > > > > > > ;
> > > > > > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > > > > > +MODULE_LICENSE("GPL v2");    
> > > > > > 
> > > > > >    
> > > > > 
> > > > >    
> > > > 
> > > >    
> > 
> >   
>
Andreas Brauchli March 10, 2019, 10:41 p.m. UTC | #8
On Sat, 2019-03-09 at 17:02 +0000, Jonathan Cameron wrote:
> On Thu, 07 Mar 2019 21:34:12 +0100
> Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> 
> > On Sat, 2018-12-22 at 16:56 +0000, Jonathan Cameron wrote:
> > > On Tue, 18 Dec 2018 18:44:40 +0100
> > > Tomasz Duszynski <tduszyns@gmail.com> wrote:
> > >   
> > > > On Mon, Dec 17, 2018 at 11:59:36AM +0000, Jonathan Cameron
> > > > wrote:  
> > > > > On Sun, 16 Dec 2018 17:38:18 +0100
> > > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > > >    
> > > > > > On Sun, 2018-12-16 at 13:34 +0000, Jonathan Cameron
> > > > > > wrote:    
> > > > > > > On Thu, 13 Dec 2018 15:43:23 +0100
> > > > > > > Andreas Brauchli <a.brauchli@elementarea.net> wrote:
> > > > > > >    
> > > > > > > > Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas
> > > > > > > > sensors
> > > > > > > > 
> > > > > > > > Supported Features:
> > > > > > > > 
> > > > > > > > * Indoor Air Quality (IAQ) concentrations for
> > > > > > > >   - tVOC (in_concentration_voc_input)
> > > > > > > >   - CO2eq (in_concentration_co2_input) - SGP30 only
> > > > > > > > 
> > > > > > > >   IAQ concentrations are periodically read out by a
> > > > > > > > background
> > > > > > > > thread
> > > > > > > >   to allow the sensor to maintain its internal
> > > > > > > > baseline.
> > > > > > > > 
> > > > > > > > * Gas concentration signals
> > > > > > > >   - Ethanol (in_concentration_ethanol_raw)
> > > > > > > >   - H2 (in_concentration_h2_raw) - SGP30 only
> > > > > > > > 
> > > > > > > > https://www.sensirion.com/file/datasheet_sgp30
> > > > > > > > https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > > > 
> > > > > > > > Signed-off-by: Andreas Brauchli <  
> > > > > > > > andreas.brauchli@sensirion.com>    
> > > > > > > 
> > > > > > > Why do we provide endianness info given we don't provide
> > > > > > > the
> > > > > > > buffered
> > > > > > > interface?  It's only used when we do.    
> > > > > > 
> > > > > > Makes sense but I wasn't aware of it. The initial
> > > > > > submission
> > > > > > came with
> > > > > > buffering, so it probably wasn't spotted in v2.
> > > > > >    
> > > > > > > 
> > > > > > > Some over the top line wrapping as well.  However as
> > > > > > > that's
> > > > > > > it
> > > > > > > I'll just clean up whilst applying.  If I've missed
> > > > > > > something
> > > > > > > odd
> > > > > > > around the endian thing shout!    
> > > > > > 
> > > > > > No that's it, thanks a lot.
> > > > > >    
> > > > > > > 
> > > > > > > Jonathan
> > > > > > >    
> > > > > > > > ---
> > > > > > > >  drivers/iio/chemical/Kconfig  |  13 +  
> > 
> > Apologies for noticing so late, but I fear that the Kconfig part
> > might
> > have been lost.
> > 
> > It's not in the upstream commit
> > 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.0&id=ce514124161ac2ceb13d10b6c40cbf05c8f0cc91
> > nor in the testing branch (togreg is already removed)
> > 
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/tree/drivers/iio/chemical/Kconfig?h=testing
> 
> Sorry about this.  I'll put together a patch to fix it up as it's
> a simple case of adding the missing Kconfig block, I've applied it
> directly to the fixes-togreg branch of iio.git with your reported-by
> added.  If you could sanity check that it would be great.
> I'll push out as soon as my local build tests finish.

No worries, all good. Thanks for the quick fix.

https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/commit/drivers/iio/chemical?h=fixes-togreg&id=831d2fefdfce757fcea86742220f8cbe7ca51ddd
Reviewed-by: Andreas Brauchli <andreas.brauchli@sensirion.com>

> 
> This will have to wait for the merge window to close, but that should
> be in about a week so not to bad.
> 
> Sorry again, clearly messed this one up!
> 
> Jonathan
> 
> > 
> > > > > > > >  drivers/iio/chemical/Makefile |   1 +
> > > > > > > >  drivers/iio/chemical/sgp30.c  | 603
> > > > > > > > ++++++++++++++++++++++++++++++++++
> > > > > > > >  3 files changed, 617 insertions(+)
> > > > > > > >  create mode 100644 drivers/iio/chemical/sgp30.c
> > > > > > > > 
> > > > > > > > diff --git a/drivers/iio/chemical/Kconfig
> > > > > > > > b/drivers/iio/chemical/Kconfig
> > > > > > > > index b8e005be4f87..b0c912be94a9 100644
> > > > > > > > --- a/drivers/iio/chemical/Kconfig
> > > > > > > > +++ b/drivers/iio/chemical/Kconfig
> > > > > > > > @@ -61,6 +61,19 @@ config IAQCORE
> > > > > > > >  	  iAQ-Core Continuous/Pulsed VOC (Volatile
> > > > > > > > Organic
> > > > > > > > Compounds)
> > > > > > > >  	  sensors
> > > > > > > > 
> > > > > > > > +config SENSIRION_SGP30    
> > > > > > 
> > > > > > I noticed that in Tomasz's SPS30 patch it's just SPS30, so
> > > > > > for
> > > > > > consistency's sake I'm fine with dropping the branding. Up
> > > > > > to
> > > > > > you.    
> > > > > 
> > > > > We've never had any hard rules on this, at least partly
> > > > > because a
> > > > > lot
> > > > > of drivers came from other subsystems in the early days.
> > > > > 
> > > > > We probably should have a rule though.  SGP30 for example is
> > > > > generic
> > > > > enough that it might well be reused by someone else.
> > > > >    
> > > > 
> > > > Wondering how likely is this? These days some popular sensors
> > > > have
> > > > their
> > > > clones. Interestingly enough, they are sold as genuine i.e
> > > > without vendor/sensor name changes. On the other hand there are
> > > > very
> > > > same ICs manufactured by different companies but still with
> > > > different names.
> > > >   
> > > > > Anyone have any strong opinions on this?  If not I think I'll
> > > > > start
> > > > > encouraging prefixing with manufacturer of first supported
> > > > > device.
> > > > >    
> > > > 
> > > > What about sticking to what we have now and adding prefix when
> > > > we
> > > > do
> > > > have naming collision? Just my 2 cents.
> > > >   
> > > 
> > > Agreed in the sense that it's not worth changing existing drivers
> > > unless
> > > we have a reason to..
> > > 
> > > But if the question is raised for what is preferred, I think
> > > adding a
> > > vendor
> > > is good.  There have been clashes with i2c devices in the past
> > > where
> > > the
> > > binding without vendor was insufficient to distinguish the part.
> > > 
> > > Not sure what it was, but I remember the discussion being one of
> > > the
> > > motivations
> > > to add vendor prefixes to the look up for i2c devices.
> > > 
> > > Jonathan
> > >   
> > > > > Jonathan
> > > > >    
> > > > > >    
> > > > > > > > +	tristate "Sensirion SGPxx gas sensors"
> > > > > > > > +	depends on I2C
> > > > > > > > +	select CRC8
> > > > > > > > +	help
> > > > > > > > +	  Say Y here to build I2C interface support for
> > > > > > > > the
> > > > > > > > following
> > > > > > > > +	  Sensirion SGP gas sensors:
> > > > > > > > +	    * SGP30 gas sensor
> > > > > > > > +	    * SGPC3 low power gas sensor
> > > > > > > > +
> > > > > > > > +	  To compile this driver as module, choose M
> > > > > > > > here: the
> > > > > > > > +	  module will be called sgp30.
> > > > > > > > +
> > > > > > > >  config VZ89X
> > > > > > > >  	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
> > > > > > > >  	depends on I2C
> > > > > > > > diff --git a/drivers/iio/chemical/Makefile
> > > > > > > > b/drivers/iio/chemical/Makefile
> > > > > > > > index 2f4c4ba4d781..61e83944db1a 100644
> > > > > > > > --- a/drivers/iio/chemical/Makefile
> > > > > > > > +++ b/drivers/iio/chemical/Makefile
> > > > > > > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) +=
> > > > > > > > bme680_i2c.o
> > > > > > > >  obj-$(CONFIG_BME680_SPI) += bme680_spi.o
> > > > > > > >  obj-$(CONFIG_CCS811)		+= ccs811.o
> > > > > > > >  obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
> > > > > > > > +obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
> > > > > > > >  obj-$(CONFIG_VZ89X)		+= vz89x.o
> > > > > > > > diff --git a/drivers/iio/chemical/sgp30.c
> > > > > > > > b/drivers/iio/chemical/sgp30.c
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..90eb4cbb18cf
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/drivers/iio/chemical/sgp30.c
> > > > > > > > @@ -0,0 +1,603 @@
> > > > > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > > > > +/*
> > > > > > > > + * sgp30.c - Support for Sensirion SGP Gas Sensors
> > > > > > > > + *
> > > > > > > > + * Copyright (C) 2018 Andreas Brauchli <    
> > > > > > > > andreas.brauchli@sensirion.com>    
> > > > > > > > + *
> > > > > > > > + * I2C slave address: 0x58
> > > > > > > > + *
> > > > > > > > + * Datasheets:
> > > > > > > > + * https://www.sensirion.com/file/datasheet_sgp30
> > > > > > > > + * https://www.sensirion.com/file/datasheet_sgpc3
> > > > > > > > + *
> > > > > > > > + * TODO:
> > > > > > > > + * - baseline support
> > > > > > > > + * - humidity compensation
> > > > > > > > + * - power mode switching (SGPC3)
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +#include <linux/crc8.h>
> > > > > > > > +#include <linux/delay.h>
> > > > > > > > +#include <linux/kthread.h>
> > > > > > > > +#include <linux/module.h>
> > > > > > > > +#include <linux/mutex.h>
> > > > > > > > +#include <linux/i2c.h>
> > > > > > > > +#include <linux/of_device.h>
> > > > > > > > +#include <linux/iio/iio.h>
> > > > > > > > +#include <linux/iio/sysfs.h>
> > > > > > > > +
> > > > > > > > +#define SGP_WORD_LEN				2
> > > > > > > > +#define SGP_CRC8_POLYNOMIAL			0x31
> > > > > > > > +#define SGP_CRC8_INIT				0xff
> > > > > > > > +#define SGP_CRC8_LEN				1
> > > > > > > > +#define SGP_CMD(cmd_word)			cpu_to_
> > > > > > > > be16(cmd
> > > > > > > > _word)
> > > > > > > > +#define SGP_CMD_DURATION_US			12000
> > > > > > > > +#define SGP_MEASUREMENT_DURATION_US		50000
> > > > > > > > +#define SGP_CMD_LEN				SGP_WOR
> > > > > > > > D_LEN
> > > > > > > > +#define SGP_CMD_MAX_BUF_SIZE			(SGP_CM
> > > > > > > > D_LEN +
> > > > > > > > 2 * SGP_WORD_LEN)
> > > > > > > > +#define SGP_MEASUREMENT_LEN			2
> > > > > > > > +#define SGP30_MEASURE_INTERVAL_HZ		1
> > > > > > > > +#define SGPC3_MEASURE_INTERVAL_HZ		2
> > > > > > > > +#define SGP_VERS_PRODUCT(data)	((((data)-
> > > > > > > > >feature_set) 
> > > > > > > > &
> > > > > > > > 0xf000) >> 12)
> > > > > > > > +#define SGP_VERS_RESERVED(data)	((((data)-
> > > > > > > > >feature_set) 
> > > > > > > > &
> > > > > > > > 0x0800) >> 11)
> > > > > > > > +#define SGP_VERS_GEN(data)	((((data)->feature_set) 
> > > > > > > > &
> > > > > > > > 0x0600) >> 9)
> > > > > > > > +#define SGP_VERS_ENG_BIT(data)	((((data)-
> > > > > > > > >feature_set) 
> > > > > > > > &
> > > > > > > > 0x0100) >> 8)
> > > > > > > > +#define SGP_VERS_MAJOR(data)	((((data)-
> > > > > > > > >feature_set) 
> > > > > > > > &
> > > > > > > > 0x00e0) >> 5)
> > > > > > > > +#define SGP_VERS_MINOR(data)	(((data)->feature_set)
> > > > > > > > &
> > > > > > > > 0x001f)
> > > > > > > > +
> > > > > > > > +DECLARE_CRC8_TABLE(sgp_crc8_table);
> > > > > > > > +
> > > > > > > > +enum sgp_product_id {
> > > > > > > > +	SGP30 = 0,
> > > > > > > > +	SGPC3,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum sgp30_channel_idx {
> > > > > > > > +	SGP30_IAQ_TVOC_IDX = 0,
> > > > > > > > +	SGP30_IAQ_CO2EQ_IDX,
> > > > > > > > +	SGP30_SIG_ETOH_IDX,
> > > > > > > > +	SGP30_SIG_H2_IDX,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum sgpc3_channel_idx {
> > > > > > > > +	SGPC3_IAQ_TVOC_IDX = 10,
> > > > > > > > +	SGPC3_SIG_ETOH_IDX,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum sgp_cmd {
> > > > > > > > +	SGP_CMD_IAQ_INIT			=
> > > > > > > > SGP_CMD(0x2003),
> > > > > > > > +	SGP_CMD_IAQ_MEASURE			=
> > > > > > > > SGP_CMD(0x2008),
> > > > > > > > +	SGP_CMD_GET_FEATURE_SET			=
> > > > > > > > SGP_CMD(0x202f),
> > > > > > > > +	SGP_CMD_GET_SERIAL_ID			=
> > > > > > > > SGP_CMD(0x3682),
> > > > > > > > +
> > > > > > > > +	SGP30_CMD_MEASURE_SIGNAL		=
> > > > > > > > SGP_CMD(0x2050),
> > > > > > > > +
> > > > > > > > +	SGPC3_CMD_MEASURE_RAW			=
> > > > > > > > SGP_CMD(0x2046),
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct sgp_version {
> > > > > > > > +	u8 major;
> > > > > > > > +	u8 minor;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct sgp_crc_word {
> > > > > > > > +	__be16 value;
> > > > > > > > +	u8 crc8;
> > > > > > > > +} __attribute__((__packed__));
> > > > > > > > +
> > > > > > > > +union sgp_reading {
> > > > > > > > +	u8 start;
> > > > > > > > +	struct sgp_crc_word raw_words[4];
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum _iaq_buffer_state {
> > > > > > > > +	IAQ_BUFFER_EMPTY = 0,
> > > > > > > > +	IAQ_BUFFER_DEFAULT_VALS,
> > > > > > > > +	IAQ_BUFFER_VALID,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct sgp_data {
> > > > > > > > +	struct i2c_client *client;
> > > > > > > > +	struct task_struct *iaq_thread;
> > > > > > > > +	struct mutex data_lock;
> > > > > > > > +	unsigned long iaq_init_start_jiffies;
> > > > > > > > +	unsigned long iaq_defval_skip_jiffies;
> > > > > > > > +	u16 product_id;
> > > > > > > > +	u16 feature_set;
> > > > > > > > +	unsigned long measure_interval_jiffies;
> > > > > > > > +	enum sgp_cmd iaq_init_cmd;
> > > > > > > > +	enum sgp_cmd measure_iaq_cmd;
> > > > > > > > +	enum sgp_cmd measure_gas_signals_cmd;
> > > > > > > > +	union sgp_reading buffer;
> > > > > > > > +	union sgp_reading iaq_buffer;
> > > > > > > > +	enum _iaq_buffer_state iaq_buffer_state;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct sgp_device {
> > > > > > > > +	const struct iio_chan_spec *channels;
> > > > > > > > +	int num_channels;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct sgp_version
> > > > > > > > supported_versions_sgp30[]
> > > > > > > > = {
> > > > > > > > +	{
> > > > > > > > +		.major = 1,
> > > > > > > > +		.minor = 0,
> > > > > > > > +	},
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct sgp_version
> > > > > > > > supported_versions_sgpc3[]
> > > > > > > > = {
> > > > > > > > +	{
> > > > > > > > +		.major = 0,
> > > > > > > > +		.minor = 4,
> > > > > > > > +	},
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct iio_chan_spec sgp30_channels[] = {
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > > +		.address = SGP30_IAQ_TVOC_IDX,
> > > > > > > > +	},
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_CO2,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > > +		.address = SGP30_IAQ_CO2EQ_IDX,
> > > > > > > > +	},
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > > 
> > > > > > > Definitely looks like it'll fit in under 80 chars.
> > > > > > >    
> > > > > > > > +		.address = SGP30_SIG_ETOH_IDX,
> > > > > > > > +		.scan_type = {
> > > > > > > > +			.endianness = IIO_BE,
> > > > > > > > +		},
> > > > > > > > +	},
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_H2,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > > 
> > > > > > > Same here on length.
> > > > > > >    
> > > > > > > > +		.address = SGP30_SIG_H2_IDX,
> > > > > > > > +		.scan_type = {
> > > > > > > > +			.endianness = IIO_BE,
> > > > > > > > +		},
> > > > > > > > +	},
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct iio_chan_spec sgpc3_channels[] = {
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_VOC,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > BIT(IIO_CHAN_INFO_PROCESSED),
> > > > > > > > +		.address = SGPC3_IAQ_TVOC_IDX,
> > > > > > > > +	},
> > > > > > > > +	{
> > > > > > > > +		.type = IIO_CONCENTRATION,
> > > > > > > > +		.channel2 = IIO_MOD_ETHANOL,
> > > > > > > > +		.modified = 1,
> > > > > > > > +		.info_mask_separate =
> > > > > > > > +			BIT(IIO_CHAN_INFO_RAW),    
> > > > > > > 
> > > > > > > And another on length.    
> > > > > > > > +		.address = SGPC3_SIG_ETOH_IDX,
> > > > > > > > +		.scan_type = {
> > > > > > > > +			.endianness = IIO_BE,
> > > > > > > > +		},
> > > > > > > > +	},
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct sgp_device sgp_devices[] = {
> > > > > > > > +	[SGP30] = {
> > > > > > > > +		.channels = sgp30_channels,
> > > > > > > > +		.num_channels =
> > > > > > > > ARRAY_SIZE(sgp30_channels),
> > > > > > > > +	},
> > > > > > > > +	[SGPC3] = {
> > > > > > > > +		.channels = sgpc3_channels,
> > > > > > > > +		.num_channels =
> > > > > > > > ARRAY_SIZE(sgpc3_channels),
> > > > > > > > +	},
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +/**
> > > > > > > > + * sgp_verify_buffer() - verify the checksums of the
> > > > > > > > data
> > > > > > > > buffer
> > > > > > > > words
> > > > > > > > + *
> > > > > > > > + * @data:       SGP data
> > > > > > > > + * @buf:        Raw data buffer
> > > > > > > > + * @word_count: Num data words stored in the buffer,
> > > > > > > > excluding CRC
> > > > > > > > bytes
> > > > > > > > + *
> > > > > > > > + * Return:      0 on success, negative error
> > > > > > > > otherwise.
> > > > > > > > + */
> > > > > > > > +static int sgp_verify_buffer(const struct sgp_data
> > > > > > > > *data,
> > > > > > > > +			     union sgp_reading *buf,
> > > > > > > > size_t
> > > > > > > > word_count)
> > > > > > > > +{
> > > > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > > > SGP_CRC8_LEN);
> > > > > > > > +	int i;
> > > > > > > > +	u8 crc;
> > > > > > > > +	u8 *data_buf = &buf->start;
> > > > > > > > +
> > > > > > > > +	for (i = 0; i < size; i += SGP_WORD_LEN +
> > > > > > > > SGP_CRC8_LEN)
> > > > > > > > {
> > > > > > > > +		crc = crc8(sgp_crc8_table,
> > > > > > > > &data_buf[i],
> > > > > > > > SGP_WORD_LEN,
> > > > > > > > +			   SGP_CRC8_INIT);
> > > > > > > > +		if (crc != data_buf[i + SGP_WORD_LEN])
> > > > > > > > {
> > > > > > > > +			dev_err(&data->client->dev,
> > > > > > > > "CRC
> > > > > > > > error\n");
> > > > > > > > +			return -EIO;
> > > > > > > > +		}
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +/**
> > > > > > > > + * sgp_read_cmd() - reads data from sensor after
> > > > > > > > issuing a
> > > > > > > > command
> > > > > > > > + * The caller must hold data->data_lock for the
> > > > > > > > duration
> > > > > > > > of the
> > > > > > > > call.
> > > > > > > > + * @data:        SGP data
> > > > > > > > + * @cmd:         SGP Command to issue
> > > > > > > > + * @buf:         Raw data buffer to use
> > > > > > > > + * @word_count:  Num words to read, excluding CRC
> > > > > > > > bytes
> > > > > > > > + *
> > > > > > > > + * Return:       0 on success, negative error
> > > > > > > > otherwise.
> > > > > > > > + */
> > > > > > > > +static int sgp_read_cmd(struct sgp_data *data, enum
> > > > > > > > sgp_cmd cmd,
> > > > > > > > +			union sgp_reading *buf, size_t
> > > > > > > > word_count,
> > > > > > > > +			unsigned long duration_us)
> > > > > > > > +{
> > > > > > > > +	int ret;
> > > > > > > > +	struct i2c_client *client = data->client;
> > > > > > > > +	size_t size = word_count * (SGP_WORD_LEN +
> > > > > > > > SGP_CRC8_LEN);
> > > > > > > > +	u8 *data_buf;
> > > > > > > > +
> > > > > > > > +	ret = i2c_master_send(client, (const char
> > > > > > > > *)&cmd,
> > > > > > > > SGP_CMD_LEN);
> > > > > > > > +	if (ret != SGP_CMD_LEN)
> > > > > > > > +		return -EIO;
> > > > > > > > +	usleep_range(duration_us, duration_us + 1000);
> > > > > > > > +
> > > > > > > > +	if (word_count == 0)
> > > > > > > > +		return 0;
> > > > > > > > +
> > > > > > > > +	data_buf = &buf->start;
> > > > > > > > +	ret = i2c_master_recv(client, data_buf, size);
> > > > > > > > +	if (ret < 0)
> > > > > > > > +		return ret;
> > > > > > > > +	if (ret != size)
> > > > > > > > +		return -EIO;
> > > > > > > > +
> > > > > > > > +	return sgp_verify_buffer(data, buf,
> > > > > > > > word_count);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +/**
> > > > > > > > + * sgp_measure_iaq() - measure and retrieve IAQ values
> > > > > > > > from sensor
> > > > > > > > + * The caller must hold data->data_lock for the
> > > > > > > > duration
> > > > > > > > of the
> > > > > > > > call.
> > > > > > > > + * @data:       SGP data
> > > > > > > > + *
> > > > > > > > + * Return:      0 on success, -EBUSY on default
> > > > > > > > values,
> > > > > > > > negative
> > > > > > > > error
> > > > > > > > + *              otherwise.
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +static int sgp_measure_iaq(struct sgp_data *data)
> > > > > > > > +{
> > > > > > > > +	int ret;
> > > > > > > > +	/* data contains default values */
> > > > > > > > +	bool default_vals = !time_after(jiffies,
> > > > > > > > data-    
> > > > > > > > > iaq_init_start_jiffies +    
> > > > > > > > 
> > > > > > > > +						 data- 
> > > > > > > >    
> > > > > > > > > iaq_defval_skip_jiffies);    
> > > > > > > > 
> > > > > > > > +
> > > > > > > > +	ret = sgp_read_cmd(data, data->measure_iaq_cmd,
> > > > > > > > &data-    
> > > > > > > > > iaq_buffer,    
> > > > > > > > 
> > > > > > > > +			   SGP_MEASUREMENT_LEN,
> > > > > > > > SGP_MEASUREMENT_DURATION_US);
> > > > > > > > +	if (ret < 0)
> > > > > > > > +		return ret;
> > > > > > > > +
> > > > > > > > +	data->iaq_buffer_state =
> > > > > > > > IAQ_BUFFER_DEFAULT_VALS;
> > > > > > > > +
> > > > > > > > +	if (default_vals)
> > > > > > > > +		return -EBUSY;
> > > > > > > > +
> > > > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_VALID;
> > > > > > > > +
> > > > > > > > +	return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static void sgp_iaq_thread_sleep_until(const struct
> > > > > > > > sgp_data
> > > > > > > > *data,
> > > > > > > > +				       unsigned long
> > > > > > > > sleep_jiffies)
> > > > > > > > +{
> > > > > > > > +	const long IAQ_POLL = 50000;
> > > > > > > > +
> > > > > > > > +	while (!time_after(jiffies, sleep_jiffies)) {
> > > > > > > > +		usleep_range(IAQ_POLL, IAQ_POLL +
> > > > > > > > 10000);
> > > > > > > > +		if (kthread_should_stop() || data-    
> > > > > > > > > iaq_init_start_jiffies == 0)    
> > > > > > > > 
> > > > > > > > +			return;
> > > > > > > > +	}
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int sgp_iaq_threadfn(void *p)
> > > > > > > > +{
> > > > > > > > +	struct sgp_data *data = (struct sgp_data *)p;
> > > > > > > > +	unsigned long next_update_jiffies;
> > > > > > > > +	int ret;
> > > > > > > > +
> > > > > > > > +	while (!kthread_should_stop()) {
> > > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > > +		if (data->iaq_init_start_jiffies == 0)
> > > > > > > > {
> > > > > > > > +			ret = sgp_read_cmd(data,
> > > > > > > > data-  
> > > > > > > > > iaq_init_cmd,  
> > > > > > > > 
> > > > > > > > NULL, 0,
> > > > > > > > +					   SGP_CMD_DURA
> > > > > > > > TION_US)
> > > > > > > > ;
> > > > > > > > +			if (ret < 0)
> > > > > > > > +				goto
> > > > > > > > unlock_sleep_continue;
> > > > > > > > +			data->iaq_init_start_jiffies =
> > > > > > > > jiffies;
> > > > > > > > +		}
> > > > > > > > +
> > > > > > > > +		ret = sgp_measure_iaq(data);
> > > > > > > > +		if (ret && ret != -EBUSY) {
> > > > > > > > +			dev_warn(&data->client->dev,
> > > > > > > > +				 "IAQ measurement error
> > > > > > > > [%d]\n", ret);
> > > > > > > > +		}
> > > > > > > > +unlock_sleep_continue:
> > > > > > > > +		next_update_jiffies = jiffies +
> > > > > > > > data-    
> > > > > > > > > measure_interval_jiffies;    
> > > > > > > > 
> > > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > > +		sgp_iaq_thread_sleep_until(data,
> > > > > > > > next_update_jiffies);
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int sgp_read_raw(struct iio_dev *indio_dev,
> > > > > > > > +			struct iio_chan_spec const
> > > > > > > > *chan, int
> > > > > > > > *val,
> > > > > > > > +			int *val2, long mask)
> > > > > > > > +{
> > > > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > > > +	struct sgp_crc_word *words;
> > > > > > > > +	int ret;
> > > > > > > > +
> > > > > > > > +	switch (mask) {
> > > > > > > > +	case IIO_CHAN_INFO_PROCESSED:
> > > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > > +		if (data->iaq_buffer_state !=
> > > > > > > > IAQ_BUFFER_VALID)
> > > > > > > > {
> > > > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > > > +			return -EBUSY;
> > > > > > > > +		}
> > > > > > > > +		words = data->iaq_buffer.raw_words;
> > > > > > > > +		switch (chan->address) {
> > > > > > > > +		case SGP30_IAQ_TVOC_IDX:
> > > > > > > > +		case SGPC3_IAQ_TVOC_IDX:
> > > > > > > > +			*val = 0;
> > > > > > > > +			*val2 =
> > > > > > > > be16_to_cpu(words[1].value);
> > > > > > > > +			ret = IIO_VAL_INT_PLUS_NANO;
> > > > > > > > +			break;
> > > > > > > > +		case SGP30_IAQ_CO2EQ_IDX:
> > > > > > > > +			*val = 0;
> > > > > > > > +			*val2 =
> > > > > > > > be16_to_cpu(words[0].value);
> > > > > > > > +			ret = IIO_VAL_INT_PLUS_MICRO;
> > > > > > > > +			break;
> > > > > > > > +		default:
> > > > > > > > +			ret = -EINVAL;
> > > > > > > > +			break;
> > > > > > > > +		}
> > > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > > +		break;
> > > > > > > > +	case IIO_CHAN_INFO_RAW:
> > > > > > > > +		mutex_lock(&data->data_lock);
> > > > > > > > +		if (chan->address ==
> > > > > > > > SGPC3_SIG_ETOH_IDX) {
> > > > > > > > +			if (data->iaq_buffer_state ==
> > > > > > > > IAQ_BUFFER_EMPTY)
> > > > > > > > +				ret = -EBUSY;
> > > > > > > > +			else
> > > > > > > > +				ret = 0;
> > > > > > > > +			words = data-
> > > > > > > > >iaq_buffer.raw_words;
> > > > > > > > +		} else {
> > > > > > > > +			ret = sgp_read_cmd(data,
> > > > > > > > data-    
> > > > > > > > > measure_gas_signals_cmd,    
> > > > > > > > 
> > > > > > > > +					   &data-
> > > > > > > > >buffer,
> > > > > > > > SGP_MEASUREMENT_LEN,
> > > > > > > > +					   SGP_MEASUREM
> > > > > > > > ENT_DURA
> > > > > > > > TION_US)
> > > > > > > > ;
> > > > > > > > +			words = data->buffer.raw_words;
> > > > > > > > +		}
> > > > > > > > +		if (ret) {
> > > > > > > > +			mutex_unlock(&data->data_lock);
> > > > > > > > +			return ret;
> > > > > > > > +		}
> > > > > > > > +
> > > > > > > > +		switch (chan->address) {
> > > > > > > > +		case SGP30_SIG_ETOH_IDX:
> > > > > > > > +			*val =
> > > > > > > > be16_to_cpu(words[1].value);
> > > > > > > > +			ret = IIO_VAL_INT;
> > > > > > > > +			break;
> > > > > > > > +		case SGPC3_SIG_ETOH_IDX:
> > > > > > > > +		case SGP30_SIG_H2_IDX:
> > > > > > > > +			*val =
> > > > > > > > be16_to_cpu(words[0].value);
> > > > > > > > +			ret = IIO_VAL_INT;
> > > > > > > > +			break;
> > > > > > > > +		default:
> > > > > > > > +			ret = -EINVAL;
> > > > > > > > +			break;
> > > > > > > > +		}
> > > > > > > > +		mutex_unlock(&data->data_lock);
> > > > > > > > +		break;
> > > > > > > > +	default:
> > > > > > > > +		return -EINVAL;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	return ret;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int sgp_check_compat(struct sgp_data *data,
> > > > > > > > +			    unsigned int product_id)
> > > > > > > > +{
> > > > > > > > +	const struct sgp_version *supported_versions;
> > > > > > > > +	u16 ix, num_fs;
> > > > > > > > +	u16 product, generation, major, minor;
> > > > > > > > +
> > > > > > > > +	/* driver does not match product */
> > > > > > > > +	generation = SGP_VERS_GEN(data);
> > > > > > > > +	if (generation != 0) {
> > > > > > > > +		dev_err(&data->client->dev,
> > > > > > > > +			"incompatible product
> > > > > > > > generation %d !=
> > > > > > > > 0",
> > > > > > > > generation);
> > > > > > > > +		return -ENODEV;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	product = SGP_VERS_PRODUCT(data);
> > > > > > > > +	if (product != product_id) {
> > > > > > > > +		dev_err(&data->client->dev,
> > > > > > > > +			"sensor reports a different
> > > > > > > > product:
> > > > > > > > 0x%04hx\n",
> > > > > > > > +			product);
> > > > > > > > +		return -ENODEV;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	if (SGP_VERS_RESERVED(data))
> > > > > > > > +		dev_warn(&data->client->dev, "reserved
> > > > > > > > bit is
> > > > > > > > set\n");
> > > > > > > > +
> > > > > > > > +	/* engineering samples are not supported: no
> > > > > > > > interface
> > > > > > > > guarantees */
> > > > > > > > +	if (SGP_VERS_ENG_BIT(data))
> > > > > > > > +		return -ENODEV;
> > > > > > > > +
> > > > > > > > +	switch (product) {
> > > > > > > > +	case SGP30:
> > > > > > > > +		supported_versions =
> > > > > > > > supported_versions_sgp30;
> > > > > > > > +		num_fs =
> > > > > > > > ARRAY_SIZE(supported_versions_sgp30);
> > > > > > > > +		break;
> > > > > > > > +	case SGPC3:
> > > > > > > > +		supported_versions =
> > > > > > > > supported_versions_sgpc3;
> > > > > > > > +		num_fs =
> > > > > > > > ARRAY_SIZE(supported_versions_sgpc3);
> > > > > > > > +		break;
> > > > > > > > +	default:
> > > > > > > > +		return -ENODEV;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	major = SGP_VERS_MAJOR(data);
> > > > > > > > +	minor = SGP_VERS_MINOR(data);
> > > > > > > > +	for (ix = 0; ix < num_fs; ix++) {
> > > > > > > > +		if (major ==
> > > > > > > > supported_versions[ix].major &&
> > > > > > > > +		    minor >=
> > > > > > > > supported_versions[ix].minor)
> > > > > > > > +			return 0;
> > > > > > > > +	}
> > > > > > > > +	dev_err(&data->client->dev, "unsupported sgp
> > > > > > > > version:
> > > > > > > > %d.%d\n",
> > > > > > > > +		major, minor);
> > > > > > > > +
> > > > > > > > +	return -ENODEV;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static void sgp_init(struct sgp_data *data)
> > > > > > > > +{
> > > > > > > > +	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
> > > > > > > > +	data->iaq_init_start_jiffies = 0;
> > > > > > > > +	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
> > > > > > > > +	switch (SGP_VERS_PRODUCT(data)) {
> > > > > > > > +	case SGP30:
> > > > > > > > +		data->measure_interval_jiffies =
> > > > > > > > SGP30_MEASURE_INTERVAL_HZ * HZ;
> > > > > > > > +		data->measure_iaq_cmd =
> > > > > > > > SGP_CMD_IAQ_MEASURE;
> > > > > > > > +		data->measure_gas_signals_cmd =
> > > > > > > > SGP30_CMD_MEASURE_SIGNAL;
> > > > > > > > +		data->product_id = SGP30;
> > > > > > > > +		data->iaq_defval_skip_jiffies = 15 *
> > > > > > > > HZ;
> > > > > > > > +		break;
> > > > > > > > +	case SGPC3:
> > > > > > > > +		data->measure_interval_jiffies =
> > > > > > > > SGPC3_MEASURE_INTERVAL_HZ * HZ;
> > > > > > > > +		data->measure_iaq_cmd =
> > > > > > > > SGPC3_CMD_MEASURE_RAW;
> > > > > > > > +		data->measure_gas_signals_cmd =
> > > > > > > > SGPC3_CMD_MEASURE_RAW;
> > > > > > > > +		data->product_id = SGPC3;
> > > > > > > > +		data->iaq_defval_skip_jiffies =
> > > > > > > > +			43 * data-
> > > > > > > > >measure_interval_jiffies;
> > > > > > > > +		break;
> > > > > > > > +	};
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct iio_info sgp_info = {
> > > > > > > > +	.read_raw	= sgp_read_raw,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static const struct of_device_id sgp_dt_ids[] = {
> > > > > > > > +	{ .compatible = "sensirion,sgp30", .data =
> > > > > > > > (void
> > > > > > > > *)SGP30 },
> > > > > > > > +	{ .compatible = "sensirion,sgpc3", .data =
> > > > > > > > (void
> > > > > > > > *)SGPC3 },
> > > > > > > > +	{ }
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static int sgp_probe(struct i2c_client *client,
> > > > > > > > +		     const struct i2c_device_id *id)
> > > > > > > > +{
> > > > > > > > +	struct iio_dev *indio_dev;
> > > > > > > > +	struct sgp_data *data;
> > > > > > > > +	const struct of_device_id *of_id;
> > > > > > > > +	unsigned long product_id;
> > > > > > > > +	int ret;
> > > > > > > > +
> > > > > > > > +	indio_dev = devm_iio_device_alloc(&client->dev,
> > > > > > > > sizeof(*data));
> > > > > > > > +	if (!indio_dev)
> > > > > > > > +		return -ENOMEM;
> > > > > > > > +
> > > > > > > > +	of_id = of_match_device(sgp_dt_ids, &client-
> > > > > > > > >dev);
> > > > > > > > +	if (of_id)
> > > > > > > > +		product_id = (unsigned long)of_id-
> > > > > > > > >data;
> > > > > > > > +	else
> > > > > > > > +		product_id = id->driver_data;
> > > > > > > > +
> > > > > > > > +	data = iio_priv(indio_dev);
> > > > > > > > +	i2c_set_clientdata(client, indio_dev);
> > > > > > > > +	data->client = client;
> > > > > > > > +	crc8_populate_msb(sgp_crc8_table,
> > > > > > > > SGP_CRC8_POLYNOMIAL);
> > > > > > > > +	mutex_init(&data->data_lock);
> > > > > > > > +
> > > > > > > > +	/* get feature set version and write it to
> > > > > > > > client data
> > > > > > > > */
> > > > > > > > +	ret = sgp_read_cmd(data,
> > > > > > > > SGP_CMD_GET_FEATURE_SET,
> > > > > > > > &data-    
> > > > > > > > > buffer, 1,    
> > > > > > > > 
> > > > > > > > +			   SGP_CMD_DURATION_US);
> > > > > > > > +	if (ret < 0)
> > > > > > > > +		return ret;
> > > > > > > > +
> > > > > > > > +	data->feature_set = be16_to_cpu(data-    
> > > > > > > > > buffer.raw_words[0].value);    
> > > > > > > > 
> > > > > > > > +
> > > > > > > > +	ret = sgp_check_compat(data, product_id);
> > > > > > > > +	if (ret)
> > > > > > > > +		return ret;
> > > > > > > > +
> > > > > > > > +	indio_dev->dev.parent = &client->dev;
> > > > > > > > +	indio_dev->info = &sgp_info;
> > > > > > > > +	indio_dev->name = id->name;
> > > > > > > > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > > > > +	indio_dev->channels =
> > > > > > > > sgp_devices[product_id].channels;
> > > > > > > > +	indio_dev->num_channels =
> > > > > > > > sgp_devices[product_id].num_channels;
> > > > > > > > +
> > > > > > > > +	sgp_init(data);
> > > > > > > > +
> > > > > > > > +	ret = devm_iio_device_register(&client->dev,
> > > > > > > > indio_dev);
> > > > > > > > +	if (ret) {
> > > > > > > > +		dev_err(&client->dev, "failed to
> > > > > > > > register iio
> > > > > > > > device\n");
> > > > > > > > +		return ret;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	data->iaq_thread =
> > > > > > > > kthread_run(sgp_iaq_threadfn, data,
> > > > > > > > +				       "%s-iaq", data-
> > > > > > > > >client-  
> > > > > > > > > name);  
> > > > > > > > 
> > > > > > > > +
> > > > > > > > +	return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int sgp_remove(struct i2c_client *client)
> > > > > > > > +{
> > > > > > > > +	struct iio_dev *indio_dev =
> > > > > > > > i2c_get_clientdata(client);
> > > > > > > > +	struct sgp_data *data = iio_priv(indio_dev);
> > > > > > > > +
> > > > > > > > +	if (data->iaq_thread)
> > > > > > > > +		kthread_stop(data->iaq_thread);
> > > > > > > > +
> > > > > > > > +	return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct i2c_device_id sgp_id[] = {
> > > > > > > > +	{ "sgp30", SGP30 },
> > > > > > > > +	{ "sgpc3", SGPC3 },
> > > > > > > > +	{ }
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +MODULE_DEVICE_TABLE(i2c, sgp_id);
> > > > > > > > +MODULE_DEVICE_TABLE(of, sgp_dt_ids);
> > > > > > > > +
> > > > > > > > +static struct i2c_driver sgp_driver = {
> > > > > > > > +	.driver = {
> > > > > > > > +		.name = "sgp30",
> > > > > > > > +		.of_match_table =
> > > > > > > > of_match_ptr(sgp_dt_ids),
> > > > > > > > +	},
> > > > > > > > +	.probe = sgp_probe,
> > > > > > > > +	.remove = sgp_remove,
> > > > > > > > +	.id_table = sgp_id,
> > > > > > > > +};
> > > > > > > > +module_i2c_driver(sgp_driver);
> > > > > > > > +
> > > > > > > > +MODULE_AUTHOR("Andreas Brauchli <  
> > > > > > > > andreas.brauchli@sensirion.com>")  
> > > > > > > > ;
> > > > > > > > +MODULE_AUTHOR("Pascal Sachs <
> > > > > > > > pascal.sachs@sensirion.com>")
> > > > > > > > ;
> > > > > > > > +MODULE_DESCRIPTION("Sensirion SGP gas sensors");
> > > > > > > > +MODULE_LICENSE("GPL v2");    
> > > > > > > 
> > > > > > >    
> > > > > > 
> > > > > >    
> > > > > 
> > > > >    
> > > 
> > >   
> 
>
diff mbox series

Patch

diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index b8e005be4f87..b0c912be94a9 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -61,6 +61,19 @@  config IAQCORE
 	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
 	  sensors
 
+config SENSIRION_SGP30
+	tristate "Sensirion SGPxx gas sensors"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface support for the following
+	  Sensirion SGP gas sensors:
+	    * SGP30 gas sensor
+	    * SGPC3 low power gas sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp30.
+
 config VZ89X
 	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
 	depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index 2f4c4ba4d781..61e83944db1a 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -9,4 +9,5 @@  obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
 obj-$(CONFIG_BME680_SPI) += bme680_spi.o
 obj-$(CONFIG_CCS811)		+= ccs811.o
 obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
+obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
 obj-$(CONFIG_VZ89X)		+= vz89x.o
diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
new file mode 100644
index 000000000000..90eb4cbb18cf
--- /dev/null
+++ b/drivers/iio/chemical/sgp30.c
@@ -0,0 +1,603 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sgp30.c - Support for Sensirion SGP Gas Sensors
+ *
+ * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com>
+ *
+ * I2C slave address: 0x58
+ *
+ * Datasheets:
+ * https://www.sensirion.com/file/datasheet_sgp30
+ * https://www.sensirion.com/file/datasheet_sgpc3
+ *
+ * TODO:
+ * - baseline support
+ * - humidity compensation
+ * - power mode switching (SGPC3)
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define SGP_WORD_LEN				2
+#define SGP_CRC8_POLYNOMIAL			0x31
+#define SGP_CRC8_INIT				0xff
+#define SGP_CRC8_LEN				1
+#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
+#define SGP_CMD_DURATION_US			12000
+#define SGP_MEASUREMENT_DURATION_US		50000
+#define SGP_CMD_LEN				SGP_WORD_LEN
+#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN + 2 * SGP_WORD_LEN)
+#define SGP_MEASUREMENT_LEN			2
+#define SGP30_MEASURE_INTERVAL_HZ		1
+#define SGPC3_MEASURE_INTERVAL_HZ		2
+#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) & 0xf000) >> 12)
+#define SGP_VERS_RESERVED(data)	((((data)->feature_set) & 0x0800) >> 11)
+#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
+#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) & 0x0100) >> 8)
+#define SGP_VERS_MAJOR(data)	((((data)->feature_set) & 0x00e0) >> 5)
+#define SGP_VERS_MINOR(data)	(((data)->feature_set) & 0x001f)
+
+DECLARE_CRC8_TABLE(sgp_crc8_table);
+
+enum sgp_product_id {
+	SGP30 = 0,
+	SGPC3,
+};
+
+enum sgp30_channel_idx {
+	SGP30_IAQ_TVOC_IDX = 0,
+	SGP30_IAQ_CO2EQ_IDX,
+	SGP30_SIG_ETOH_IDX,
+	SGP30_SIG_H2_IDX,
+};
+
+enum sgpc3_channel_idx {
+	SGPC3_IAQ_TVOC_IDX = 10,
+	SGPC3_SIG_ETOH_IDX,
+};
+
+enum sgp_cmd {
+	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
+	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
+	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
+	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
+
+	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
+
+	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
+};
+
+struct sgp_version {
+	u8 major;
+	u8 minor;
+};
+
+struct sgp_crc_word {
+	__be16 value;
+	u8 crc8;
+} __attribute__((__packed__));
+
+union sgp_reading {
+	u8 start;
+	struct sgp_crc_word raw_words[4];
+};
+
+enum _iaq_buffer_state {
+	IAQ_BUFFER_EMPTY = 0,
+	IAQ_BUFFER_DEFAULT_VALS,
+	IAQ_BUFFER_VALID,
+};
+
+struct sgp_data {
+	struct i2c_client *client;
+	struct task_struct *iaq_thread;
+	struct mutex data_lock;
+	unsigned long iaq_init_start_jiffies;
+	unsigned long iaq_defval_skip_jiffies;
+	u16 product_id;
+	u16 feature_set;
+	unsigned long measure_interval_jiffies;
+	enum sgp_cmd iaq_init_cmd;
+	enum sgp_cmd measure_iaq_cmd;
+	enum sgp_cmd measure_gas_signals_cmd;
+	union sgp_reading buffer;
+	union sgp_reading iaq_buffer;
+	enum _iaq_buffer_state iaq_buffer_state;
+};
+
+struct sgp_device {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+};
+
+static const struct sgp_version supported_versions_sgp30[] = {
+	{
+		.major = 1,
+		.minor = 0,
+	},
+};
+
+static const struct sgp_version supported_versions_sgpc3[] = {
+	{
+		.major = 0,
+		.minor = 4,
+	},
+};
+
+static const struct iio_chan_spec sgp30_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_CO2EQ_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_ETOH_IDX,
+		.scan_type = {
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_H2,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_H2_IDX,
+		.scan_type = {
+			.endianness = IIO_BE,
+		},
+	},
+};
+
+static const struct iio_chan_spec sgpc3_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGPC3_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW),
+		.address = SGPC3_SIG_ETOH_IDX,
+		.scan_type = {
+			.endianness = IIO_BE,
+		},
+	},
+};
+
+static const struct sgp_device sgp_devices[] = {
+	[SGP30] = {
+		.channels = sgp30_channels,
+		.num_channels = ARRAY_SIZE(sgp30_channels),
+	},
+	[SGPC3] = {
+		.channels = sgpc3_channels,
+		.num_channels = ARRAY_SIZE(sgpc3_channels),
+	},
+};
+
+/**
+ * sgp_verify_buffer() - verify the checksums of the data buffer words
+ *
+ * @data:       SGP data
+ * @buf:        Raw data buffer
+ * @word_count: Num data words stored in the buffer, excluding CRC bytes
+ *
+ * Return:      0 on success, negative error otherwise.
+ */
+static int sgp_verify_buffer(const struct sgp_data *data,
+			     union sgp_reading *buf, size_t word_count)
+{
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	int i;
+	u8 crc;
+	u8 *data_buf = &buf->start;
+
+	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
+		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
+			   SGP_CRC8_INIT);
+		if (crc != data_buf[i + SGP_WORD_LEN]) {
+			dev_err(&data->client->dev, "CRC error\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * sgp_read_cmd() - reads data from sensor after issuing a command
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:        SGP data
+ * @cmd:         SGP Command to issue
+ * @buf:         Raw data buffer to use
+ * @word_count:  Num words to read, excluding CRC bytes
+ *
+ * Return:       0 on success, negative error otherwise.
+ */
+static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
+			union sgp_reading *buf, size_t word_count,
+			unsigned long duration_us)
+{
+	int ret;
+	struct i2c_client *client = data->client;
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	u8 *data_buf;
+
+	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
+	if (ret != SGP_CMD_LEN)
+		return -EIO;
+	usleep_range(duration_us, duration_us + 1000);
+
+	if (word_count == 0)
+		return 0;
+
+	data_buf = &buf->start;
+	ret = i2c_master_recv(client, data_buf, size);
+	if (ret < 0)
+		return ret;
+	if (ret != size)
+		return -EIO;
+
+	return sgp_verify_buffer(data, buf, word_count);
+}
+
+/**
+ * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:       SGP data
+ *
+ * Return:      0 on success, -EBUSY on default values, negative error
+ *              otherwise.
+ */
+
+static int sgp_measure_iaq(struct sgp_data *data)
+{
+	int ret;
+	/* data contains default values */
+	bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies +
+						 data->iaq_defval_skip_jiffies);
+
+	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer,
+			   SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
+
+	if (default_vals)
+		return -EBUSY;
+
+	data->iaq_buffer_state = IAQ_BUFFER_VALID;
+
+	return 0;
+}
+
+static void sgp_iaq_thread_sleep_until(const struct sgp_data *data,
+				       unsigned long sleep_jiffies)
+{
+	const long IAQ_POLL = 50000;
+
+	while (!time_after(jiffies, sleep_jiffies)) {
+		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
+		if (kthread_should_stop() || data->iaq_init_start_jiffies == 0)
+			return;
+	}
+}
+
+static int sgp_iaq_threadfn(void *p)
+{
+	struct sgp_data *data = (struct sgp_data *)p;
+	unsigned long next_update_jiffies;
+	int ret;
+
+	while (!kthread_should_stop()) {
+		mutex_lock(&data->data_lock);
+		if (data->iaq_init_start_jiffies == 0) {
+			ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0,
+					   SGP_CMD_DURATION_US);
+			if (ret < 0)
+				goto unlock_sleep_continue;
+			data->iaq_init_start_jiffies = jiffies;
+		}
+
+		ret = sgp_measure_iaq(data);
+		if (ret && ret != -EBUSY) {
+			dev_warn(&data->client->dev,
+				 "IAQ measurement error [%d]\n", ret);
+		}
+unlock_sleep_continue:
+		next_update_jiffies = jiffies + data->measure_interval_jiffies;
+		mutex_unlock(&data->data_lock);
+		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
+	}
+
+	return 0;
+}
+
+static int sgp_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int *val,
+			int *val2, long mask)
+{
+	struct sgp_data *data = iio_priv(indio_dev);
+	struct sgp_crc_word *words;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&data->data_lock);
+		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
+			mutex_unlock(&data->data_lock);
+			return -EBUSY;
+		}
+		words = data->iaq_buffer.raw_words;
+		switch (chan->address) {
+		case SGP30_IAQ_TVOC_IDX:
+		case SGPC3_IAQ_TVOC_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case SGP30_IAQ_CO2EQ_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->data_lock);
+		if (chan->address == SGPC3_SIG_ETOH_IDX) {
+			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
+				ret = -EBUSY;
+			else
+				ret = 0;
+			words = data->iaq_buffer.raw_words;
+		} else {
+			ret = sgp_read_cmd(data, data->measure_gas_signals_cmd,
+					   &data->buffer, SGP_MEASUREMENT_LEN,
+					   SGP_MEASUREMENT_DURATION_US);
+			words = data->buffer.raw_words;
+		}
+		if (ret) {
+			mutex_unlock(&data->data_lock);
+			return ret;
+		}
+
+		switch (chan->address) {
+		case SGP30_SIG_ETOH_IDX:
+			*val = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT;
+			break;
+		case SGPC3_SIG_ETOH_IDX:
+		case SGP30_SIG_H2_IDX:
+			*val = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int sgp_check_compat(struct sgp_data *data,
+			    unsigned int product_id)
+{
+	const struct sgp_version *supported_versions;
+	u16 ix, num_fs;
+	u16 product, generation, major, minor;
+
+	/* driver does not match product */
+	generation = SGP_VERS_GEN(data);
+	if (generation != 0) {
+		dev_err(&data->client->dev,
+			"incompatible product generation %d != 0", generation);
+		return -ENODEV;
+	}
+
+	product = SGP_VERS_PRODUCT(data);
+	if (product != product_id) {
+		dev_err(&data->client->dev,
+			"sensor reports a different product: 0x%04hx\n",
+			product);
+		return -ENODEV;
+	}
+
+	if (SGP_VERS_RESERVED(data))
+		dev_warn(&data->client->dev, "reserved bit is set\n");
+
+	/* engineering samples are not supported: no interface guarantees */
+	if (SGP_VERS_ENG_BIT(data))
+		return -ENODEV;
+
+	switch (product) {
+	case SGP30:
+		supported_versions = supported_versions_sgp30;
+		num_fs = ARRAY_SIZE(supported_versions_sgp30);
+		break;
+	case SGPC3:
+		supported_versions = supported_versions_sgpc3;
+		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	major = SGP_VERS_MAJOR(data);
+	minor = SGP_VERS_MINOR(data);
+	for (ix = 0; ix < num_fs; ix++) {
+		if (major == supported_versions[ix].major &&
+		    minor >= supported_versions[ix].minor)
+			return 0;
+	}
+	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
+		major, minor);
+
+	return -ENODEV;
+}
+
+static void sgp_init(struct sgp_data *data)
+{
+	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
+	data->iaq_init_start_jiffies = 0;
+	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
+	switch (SGP_VERS_PRODUCT(data)) {
+	case SGP30:
+		data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
+		data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL;
+		data->product_id = SGP30;
+		data->iaq_defval_skip_jiffies = 15 * HZ;
+		break;
+	case SGPC3:
+		data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->product_id = SGPC3;
+		data->iaq_defval_skip_jiffies =
+			43 * data->measure_interval_jiffies;
+		break;
+	};
+}
+
+static const struct iio_info sgp_info = {
+	.read_raw	= sgp_read_raw,
+};
+
+static const struct of_device_id sgp_dt_ids[] = {
+	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
+	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
+	{ }
+};
+
+static int sgp_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct sgp_data *data;
+	const struct of_device_id *of_id;
+	unsigned long product_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	of_id = of_match_device(sgp_dt_ids, &client->dev);
+	if (of_id)
+		product_id = (unsigned long)of_id->data;
+	else
+		product_id = id->driver_data;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
+	mutex_init(&data->data_lock);
+
+	/* get feature set version and write it to client data */
+	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1,
+			   SGP_CMD_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value);
+
+	ret = sgp_check_compat(data, product_id);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &sgp_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = sgp_devices[product_id].channels;
+	indio_dev->num_channels = sgp_devices[product_id].num_channels;
+
+	sgp_init(data);
+
+	ret = devm_iio_device_register(&client->dev, indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "failed to register iio device\n");
+		return ret;
+	}
+
+	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
+				       "%s-iaq", data->client->name);
+
+	return 0;
+}
+
+static int sgp_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct sgp_data *data = iio_priv(indio_dev);
+
+	if (data->iaq_thread)
+		kthread_stop(data->iaq_thread);
+
+	return 0;
+}
+
+static const struct i2c_device_id sgp_id[] = {
+	{ "sgp30", SGP30 },
+	{ "sgpc3", SGPC3 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, sgp_id);
+MODULE_DEVICE_TABLE(of, sgp_dt_ids);
+
+static struct i2c_driver sgp_driver = {
+	.driver = {
+		.name = "sgp30",
+		.of_match_table = of_match_ptr(sgp_dt_ids),
+	},
+	.probe = sgp_probe,
+	.remove = sgp_remove,
+	.id_table = sgp_id,
+};
+module_i2c_driver(sgp_driver);
+
+MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>");
+MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SGP gas sensors");
+MODULE_LICENSE("GPL v2");