| Message ID | 20190209173609.13220-4-tduszyns@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add support for PMS7003 PM sensor | expand |
On Sat, 9 Feb 2019 18:36:09 +0100 Tomasz Duszynski <tduszyns@gmail.com> wrote: > Add device tree support for Plantower PMS7003 particulate matter sensor. > > Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Applied to the togreg branch of iio.git and pushed out as testing. I'll be doing a pull request pretty soon on this given where we are in the cycle. If anyone has last minute reviews, there is still a little time. Thanks, Jonathan > --- > .../iio/chemical/plantower,pms7003.txt | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > new file mode 100644 > index 000000000000..7b5f06f324c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > @@ -0,0 +1,20 @@ > +* Plantower PMS7003 particulate matter sensor > + > +Required properties: > +- compatible: must be "plantower,pms7003" > +- vcc-supply: phandle to the regulator that provides power to the sensor > + > +Optional properties: > +- plantower,set-gpios: phandle to the GPIO connected to the SET line > +- reset-gpios: phandle to the GPIO connected to the RESET line > + > +Refer to serial/slave-device.txt for generic serial attached device bindings. > + > +Example: > + > +&uart0 { > + air-pollution-sensor { > + compatible = "plantower,pms7003"; > + vcc-supply = <®_vcc5v0>; > + }; > +};
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 000000000000..7b5f06f324c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,20 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" +- vcc-supply: phandle to the regulator that provides power to the sensor + +Optional properties: +- plantower,set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; +};
Add device tree support for Plantower PMS7003 particulate matter sensor. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> --- .../iio/chemical/plantower,pms7003.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt