mbox series

[PULL] IIO second set of new device support, cleanups and features for the 5.1 cycle.

Message ID 20190212211510.5707e70f@archlinux (mailing list archive)
State New, archived
Headers show
Series [PULL] IIO second set of new device support, cleanups and features for the 5.1 cycle. | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1b

Message

Jonathan Cameron Feb. 12, 2019, 9:15 p.m. UTC
The following changes since commit c2f4dd4364b71ef4eb43925b402377aefe9c1ca0:

  staging: wlan-ng: formatting change in cfg80211.c (2019-02-08 10:31:14 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1b

for you to fetch changes up to 103cda6a3b8d2c10d5f8cd7abad118e9db8f4776:

  iio: adc: exynos-adc: Use proper number of channels for Exynos4x12 (2019-02-12 20:56:00 +0000)

----------------------------------------------------------------
Second set of new device support, features and cleanup for IIO in the 5.1 cycle.

There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.

New device support
* ad7476
  - add support for TI ADS786X parts that are compatible with this Analog
    Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
  - new driver and bindings
* Plantower PMS7003 partical sensor
  - new driver and bindings including vendor prefix.
* TI DAC7612
  - new driver and bindings for this dual DAC.

New features
* ad7768-1
  - Sampling frequency control
* bmi160
  - Data ready trigger support, including open-drain dt binding.

Cleanup / minor fixes.
* Analog Device DACs
  - Fix some inconsistent licenses.  These are only ones where there were
    two different license marked in the same file, and hence were previously
    unclear.
* ads124s08
  - Spelling fix.
* adxl345
  - Parameter alignement tidy up.
* bmi160
  - SPDX
  - correct a note on the types of supported interrupts which was too strict.
  - use iio_pollfunc_store_time to grab an earlier timestamp.
  - use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
    some handling where ret was effectively getting written to 0 even though
    it was always already 0.
* exynos_adc
  - Fix a null pointer dereference on unbind.
  - Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
  - Move DT bindings doc out of staging. Oops, I missed this one when
    moving the driver.
  - SPDX.
* npcm-adc
  - drop documentation of reset node as going to be done differently.
    It's a new driver this cycle so no need to support the previous
    binding going forwards.
* sps30
  - Fix an issue with a loop timeout test that meant it would never identify
    a timeout.
  - Mark deliberate switch fall throughs.

----------------------------------------------------------------
Artur Rojek (3):
      dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
      dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
      IIO: add Ingenic JZ47xx ADC driver.

Colin Ian King (1):
      iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"

Dan Carpenter (1):
      iio: chemical: sps30: fix a loop timeout test

Gregory CLEMENT (2):
      dt-bindings: iio: adc: move lpc32xx-adc out of staging
      iio:adc:lpc32xx use SPDX-License-Identifier

Jonathan Cameron (1):
      iio:chemical:sps30 Supress some switch fallthrough warnings.

Krzysztof Kozlowski (2):
      iio: adc: exynos-adc: Fix NULL pointer exception on unbind
      iio: adc: exynos-adc: Use proper number of channels for Exynos4x12

Luciana da Costa Marques (1):
      iio:accel:adxl345: Change alignment to match paranthesis

Martin Kelly (6):
      iio:bmi160: add SPDX identifiers
      iio:bmi160: add drdy interrupt support
      dt-bindings: fix incorrect bmi160 IRQ note
      dt-bindings: bmi160 document open-drain property
      iio:bmi160: use iio_pollfunc_store_time
      iio:bmi160: use if (ret) instead of if (ret < 0)

Ricardo Ribalda Delgado (3):
      iio: adc: ad7476: Add support for TI ADS786X ADCs
      iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
      iio:dac:dac7612: device tree bindings

Stefan Popa (2):
      drivers: iio: dac: Fix wrong license for ADI drivers
      iio: adc: ad7768-1: Add support for setting the sampling frequency

Tomasz Duszynski (3):
      iio: chemical: add support for Plantower PMS7003 sensor
      dt-bindings: add Plantower to the vendor prefixes
      dt-bindings: iio: chemical: pms7003: add device tree support

Tomer Maimon (1):
      dt-binding: iio: remove rst node from NPCM ADC document

 .../devicetree/bindings/iio/adc/ingenic,adc.txt    |  48 +++
 .../bindings/{staging => }/iio/adc/lpc32xx-adc.txt |   0
 .../bindings/iio/adc/nuvoton,npcm-adc.txt          |  11 -
 .../bindings/iio/adc/samsung,exynos-adc.txt        |   4 +-
 .../bindings/iio/chemical/plantower,pms7003.txt    |  20 ++
 .../devicetree/bindings/iio/dac/ti,dac7612.txt     |  28 ++
 .../devicetree/bindings/iio/imu/bmi160.txt         |   6 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   7 +
 drivers/iio/accel/adxl345_core.c                   |   4 +-
 drivers/iio/adc/Kconfig                            |  20 +-
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/ad7476.c                           |  20 ++
 drivers/iio/adc/ad7768-1.c                         | 202 +++++++++++-
 drivers/iio/adc/exynos_adc.c                       |  19 +-
 drivers/iio/adc/ingenic-adc.c                      | 364 +++++++++++++++++++++
 drivers/iio/adc/lpc32xx_adc.c                      |  15 +-
 drivers/iio/adc/ti-ads124s08.c                     |   8 +-
 drivers/iio/chemical/Kconfig                       |  10 +
 drivers/iio/chemical/Makefile                      |   1 +
 drivers/iio/chemical/pms7003.c                     | 340 +++++++++++++++++++
 drivers/iio/chemical/sps30.c                       |   5 +-
 drivers/iio/dac/Kconfig                            |  10 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad5686-spi.c                       |   2 +-
 drivers/iio/dac/ad5686.c                           |   2 +-
 drivers/iio/dac/ad5686.h                           |   2 +-
 drivers/iio/dac/ad5696-i2c.c                       |   2 +-
 drivers/iio/dac/ad5758.c                           |   2 +-
 drivers/iio/dac/ti-dac7612.c                       | 184 +++++++++++
 drivers/iio/imu/bmi160/bmi160.h                    |  11 +
 drivers/iio/imu/bmi160/bmi160_core.c               | 317 ++++++++++++++++--
 drivers/iio/imu/bmi160/bmi160_i2c.c                |   5 +-
 drivers/iio/imu/bmi160/bmi160_spi.c                |   4 +-
 include/dt-bindings/iio/adc/ingenic,adc.h          |  10 +
 35 files changed, 1601 insertions(+), 85 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
 rename Documentation/devicetree/bindings/{staging => }/iio/adc/lpc32xx-adc.txt (100%)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
 create mode 100644 drivers/iio/adc/ingenic-adc.c
 create mode 100644 drivers/iio/chemical/pms7003.c
 create mode 100644 drivers/iio/dac/ti-dac7612.c
 create mode 100644 include/dt-bindings/iio/adc/ingenic,adc.h

Comments

Greg KH Feb. 13, 2019, 7:26 a.m. UTC | #1
On Tue, Feb 12, 2019 at 09:15:10PM +0000, Jonathan Cameron wrote:
> The following changes since commit c2f4dd4364b71ef4eb43925b402377aefe9c1ca0:
> 
>   staging: wlan-ng: formatting change in cfg80211.c (2019-02-08 10:31:14 +0100)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1b

Pulled and pushed out, thanks.

greg k-h