| Message ID | 20190316150618.7g6hxbmadvxe623o@smtp.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | staging: iio: ad5933: move out of staging | expand |
On Sat, 16 Mar 2019 12:06:18 -0300 Marcelo Schmitt <marcelo.schmitt1@gmail.com> wrote: > Make multi-line comments compliant with the preferred code style. > > Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to hopefully ignore. Thanks, Jonathan > --- > drivers/staging/iio/impedance-analyzer/ad5933.c | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c > index 3134295f014f..05e2185bfdae 100644 > --- a/drivers/staging/iio/impedance-analyzer/ad5933.c > +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c > @@ -474,7 +474,8 @@ static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644, > ad5933_store, > AD5933_OUT_SETTLING_CYCLES); > > -/* note: > +/* > + * note: > * ideally we would handle the scale attributes via the iio_info > * (read|write)_raw methods, however this part is a untypical since we > * don't create dedicated sysfs channel attributes for out0 and in0. > @@ -572,7 +573,8 @@ static int ad5933_ring_postenable(struct iio_dev *indio_dev) > { > struct ad5933_state *st = iio_priv(indio_dev); > > - /* AD5933_CTRL_INIT_START_FREQ: > + /* > + * AD5933_CTRL_INIT_START_FREQ: > * High Q complex circuits require a long time to reach steady state. > * To facilitate the measurement of such impedances, this mode allows > * the user full control of the settling time requirement before > @@ -663,7 +665,8 @@ static void ad5933_work(struct work_struct *work) > } > > if (status & AD5933_STAT_SWEEP_DONE) { > - /* last sample received - power down do > + /* > + * last sample received - power down do > * nothing until the ring enable is toggled > */ > ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 3134295f014f..05e2185bfdae 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -474,7 +474,8 @@ static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644, ad5933_store, AD5933_OUT_SETTLING_CYCLES); -/* note: +/* + * note: * ideally we would handle the scale attributes via the iio_info * (read|write)_raw methods, however this part is a untypical since we * don't create dedicated sysfs channel attributes for out0 and in0. @@ -572,7 +573,8 @@ static int ad5933_ring_postenable(struct iio_dev *indio_dev) { struct ad5933_state *st = iio_priv(indio_dev); - /* AD5933_CTRL_INIT_START_FREQ: + /* + * AD5933_CTRL_INIT_START_FREQ: * High Q complex circuits require a long time to reach steady state. * To facilitate the measurement of such impedances, this mode allows * the user full control of the settling time requirement before @@ -663,7 +665,8 @@ static void ad5933_work(struct work_struct *work) } if (status & AD5933_STAT_SWEEP_DONE) { - /* last sample received - power down do + /* + * last sample received - power down do * nothing until the ring enable is toggled */ ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
Make multi-line comments compliant with the preferred code style. Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> --- drivers/staging/iio/impedance-analyzer/ad5933.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)