From patchwork Sat Mar 16 15:08:11 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marcelo Schmitt X-Patchwork-Id: 10855907 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 568341390 for ; Sat, 16 Mar 2019 15:08:22 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 2887929CFB for ; Sat, 16 Mar 2019 15:08:22 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 197A52A13D; Sat, 16 Mar 2019 15:08:22 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FROM,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 96CB929CFB for ; Sat, 16 Mar 2019 15:08:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726713AbfCPPIT (ORCPT ); Sat, 16 Mar 2019 11:08:19 -0400 Received: from mail-qt1-f193.google.com ([209.85.160.193]:46041 "EHLO mail-qt1-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726064AbfCPPIS (ORCPT ); Sat, 16 Mar 2019 11:08:18 -0400 Received: by mail-qt1-f193.google.com with SMTP id v20so13378211qtv.12; Sat, 16 Mar 2019 08:08:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=date:from:to:cc:subject:message-id:mime-version:content-disposition :user-agent; bh=kG27szAh2fUA7KcYee5cRJAUMyM8i9ciOPg4nW6iLfE=; b=kkAZpReEjBx3SQov7syRZd3q+7BgLjOVfchIK6tdjueYR4bb++XcDkZP0xj6phsiHt kX1aCXdWAb6iORbvUrkvxno1uIx0nyI6xiVFhzvujD/RhUlAGOhsKdvmefZ8NRbhy1Cj 8x0HqdWn6GdFGFfzDRv5aVYLN4CLVVsuGotd6pJy7+rV3kdR7J+XqM0/OlO3yhPzwMFb qhnDYGg8F/8+Ltxf+ySNHYUcOtvYi/u/6CR4bQREIdZBq4teXxqGMOuy04rndhMsvHFi C4UkOUZlpPNrvxHP9f1+ruuZCErX4KZnGxvmkfilnGEzPElnE19ffC3Kv8DrWYKpCEWS QwUA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:mime-version :content-disposition:user-agent; bh=kG27szAh2fUA7KcYee5cRJAUMyM8i9ciOPg4nW6iLfE=; b=qh7+5Ls6o5ef7U47rV9bKlhoL9tlR6Jh6J5arnUD1SlGQeUIc5EBiwoZ2C+tjai9G7 FtHO2O2j5H2qJaByP0w2xme3KZK5/dgYbGDWw8VkbUowfTNwPDltTDaU8pJhCfAdoxBY qVU7/QMw+4fPUlDYg7dUb4OzPg8APbjrBINNapbU8oL8Rf/0NwWxqKFUYuJPPRROKgGw 6QjJEKg1tKnBLKRC0caXMdXOS5xJmNFd4/uRck4YflXJPvB4NkoAIech9Pz2xjWSzSlN /bD/XKKYhAt0aFGQGjWqxZmZeSF7QP+EsTjSxAwDKwMouVh4xFP7+0ymoyvymWMMYyUq MBnQ== X-Gm-Message-State: APjAAAWi+e2Ex6U9fUXoI3LHmeYdX2xjLAoXJsfF7zILJ5jPwCUhmMiJ 3MSdbF1S+3QvjZyqd5sPxfE= X-Google-Smtp-Source: APXvYqxAcI73GAcXhzTw7dr4p3l3Tbai5umn4vkEyBtHfNPXGCfY917+jTPWyNphwuGcu2Iv96rMtg== X-Received: by 2002:a0c:9e45:: with SMTP id z5mr6662673qve.57.1552748896120; Sat, 16 Mar 2019 08:08:16 -0700 (PDT) Received: from smtp.gmail.com ([143.107.45.1]) by smtp.gmail.com with ESMTPSA id y21sm3797438qth.90.2019.03.16.08.08.13 (version=TLS1_3 cipher=AEAD-AES256-GCM-SHA384 bits=256/256); Sat, 16 Mar 2019 08:08:15 -0700 (PDT) Date: Sat, 16 Mar 2019 12:08:11 -0300 From: Marcelo Schmitt To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org, knaack.h@gmx.de, pmeerw@pmeerw.net Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, kernel-usp@googlegroups.com Subject: [PATCH v4 7/7] staging: iio: ad5933: move out of staging Message-ID: <20190316150811.hlwvltiplloywkng@smtp.gmail.com> MIME-Version: 1.0 Content-Disposition: inline User-Agent: NeoMutt/20180716 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Move ad5933 impedance-analyzer driver from staging to mainline. The ad5933 is a high precision impedance converter system solution that combines an on-board frequency generator with an analog-to-digital converter (ADC). This driver was designed to be compatible with both ad5933 and ad5934 chips. Signed-off-by: Marcelo Schmitt --- drivers/iio/impedance-analyzer/Kconfig | 18 + drivers/iio/impedance-analyzer/Makefile | 5 + drivers/iio/impedance-analyzer/ad5933.c | 811 ++++++++++++++++++ .../staging/iio/impedance-analyzer/Kconfig | 18 - .../staging/iio/impedance-analyzer/Makefile | 5 - .../staging/iio/impedance-analyzer/ad5933.c | 811 ------------------ 6 files changed, 834 insertions(+), 834 deletions(-) create mode 100644 drivers/iio/impedance-analyzer/Kconfig create mode 100644 drivers/iio/impedance-analyzer/Makefile create mode 100644 drivers/iio/impedance-analyzer/ad5933.c delete mode 100644 drivers/staging/iio/impedance-analyzer/Kconfig delete mode 100644 drivers/staging/iio/impedance-analyzer/Makefile delete mode 100644 drivers/staging/iio/impedance-analyzer/ad5933.c diff --git a/drivers/iio/impedance-analyzer/Kconfig b/drivers/iio/impedance-analyzer/Kconfig new file mode 100644 index 000000000000..b9a679cdd146 --- /dev/null +++ b/drivers/iio/impedance-analyzer/Kconfig @@ -0,0 +1,18 @@ +# +# Impedance Converter, Network Analyzer drivers +# +menu "Network Analyzer, Impedance Converters" + +config AD5933 + tristate "Analog Devices AD5933, AD5934 driver" + depends on I2C + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say yes here to build support for Analog Devices Impedance Converter, + Network Analyzer, AD5933/4. + + To compile this driver as a module, choose M here: the + module will be called ad5933. + +endmenu diff --git a/drivers/iio/impedance-analyzer/Makefile b/drivers/iio/impedance-analyzer/Makefile new file mode 100644 index 000000000000..7604d786583e --- /dev/null +++ b/drivers/iio/impedance-analyzer/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Impedance Converter, Network Analyzer drivers +# + +obj-$(CONFIG_AD5933) += ad5933.o diff --git a/drivers/iio/impedance-analyzer/ad5933.c b/drivers/iio/impedance-analyzer/ad5933.c new file mode 100644 index 000000000000..262415bc659d --- /dev/null +++ b/drivers/iio/impedance-analyzer/ad5933.c @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD5933 AD5934 Impedance Converter, Network Analyzer + * + * Copyright 2011 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* AD5933/AD5934 Registers */ +#define AD5933_REG_CONTROL_HB 0x80 /* R/W, 1 byte */ +#define AD5933_REG_CONTROL_LB 0x81 /* R/W, 1 byte */ +#define AD5933_REG_FREQ_START 0x82 /* R/W, 3 bytes */ +#define AD5933_REG_FREQ_INC 0x85 /* R/W, 3 bytes */ +#define AD5933_REG_INC_NUM 0x88 /* R/W, 2 bytes, 9 bit */ +#define AD5933_REG_SETTLING_CYCLES 0x8A /* R/W, 2 bytes */ +#define AD5933_REG_STATUS 0x8F /* R, 1 byte */ +#define AD5933_REG_TEMP_DATA 0x92 /* R, 2 bytes*/ +#define AD5933_REG_REAL_DATA 0x94 /* R, 2 bytes*/ +#define AD5933_REG_IMAG_DATA 0x96 /* R, 2 bytes*/ + +/* AD5933_REG_CONTROL_HB Bits */ +#define AD5933_CTRL_INIT_START_FREQ (0x1 << 4) +#define AD5933_CTRL_START_SWEEP (0x2 << 4) +#define AD5933_CTRL_INC_FREQ (0x3 << 4) +#define AD5933_CTRL_REPEAT_FREQ (0x4 << 4) +#define AD5933_CTRL_MEASURE_TEMP (0x9 << 4) +#define AD5933_CTRL_POWER_DOWN (0xA << 4) +#define AD5933_CTRL_STANDBY (0xB << 4) + +#define AD5933_CTRL_RANGE_2000mVpp (0x0 << 1) +#define AD5933_CTRL_RANGE_200mVpp (0x1 << 1) +#define AD5933_CTRL_RANGE_400mVpp (0x2 << 1) +#define AD5933_CTRL_RANGE_1000mVpp (0x3 << 1) +#define AD5933_CTRL_RANGE(x) ((x) << 1) + +#define AD5933_CTRL_PGA_GAIN_1 (0x1 << 0) +#define AD5933_CTRL_PGA_GAIN_5 (0x0 << 0) + +/* AD5933_REG_CONTROL_LB Bits */ +#define AD5933_CTRL_RESET (0x1 << 4) +#define AD5933_CTRL_INT_SYSCLK (0x0 << 3) +#define AD5933_CTRL_EXT_SYSCLK (0x1 << 3) + +/* AD5933_REG_STATUS Bits */ +#define AD5933_STAT_TEMP_VALID (0x1 << 0) +#define AD5933_STAT_DATA_VALID (0x1 << 1) +#define AD5933_STAT_SWEEP_DONE (0x1 << 2) + +/* I2C Block Commands */ +#define AD5933_I2C_BLOCK_WRITE 0xA0 +#define AD5933_I2C_BLOCK_READ 0xA1 +#define AD5933_I2C_ADDR_POINTER 0xB0 + +/* Device Specs */ +#define AD5933_INT_OSC_FREQ_Hz 16776000 +#define AD5933_MAX_OUTPUT_FREQ_Hz 100000 +#define AD5933_MAX_RETRIES 100 + +#define AD5933_OUT_RANGE 1 +#define AD5933_OUT_RANGE_AVAIL 2 +#define AD5933_OUT_SETTLING_CYCLES 3 +#define AD5933_IN_PGA_GAIN 4 +#define AD5933_IN_PGA_GAIN_AVAIL 5 +#define AD5933_FREQ_POINTS 6 + +#define AD5933_POLL_TIME_ms 10 +#define AD5933_INIT_EXCITATION_TIME_ms 100 + +struct ad5933_state { + struct i2c_client *client; + struct regulator *reg; + struct clk *mclk; + struct delayed_work work; + struct mutex lock; /* Protect sensor state */ + unsigned long mclk_hz; + unsigned char ctrl_hb; + unsigned char ctrl_lb; + unsigned int range_avail[4]; + unsigned short vref_mv; + unsigned short settling_cycles; + unsigned short freq_points; + unsigned int freq_start; + unsigned int freq_inc; + unsigned int state; + unsigned int poll_time_jiffies; +}; + +#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \ + _scan_index, _realbits) { \ + .type = (_type), \ + .extend_name = (_extend_name), \ + .info_mask_separate = (_info_mask_separate), \ + .address = (_address), \ + .scan_index = (_scan_index), \ + .scan_type = { \ + .sign = 's', \ + .realbits = (_realbits), \ + .storagebits = 16, \ + }, \ +} + +static const struct iio_chan_spec ad5933_channels[] = { + AD5933_CHANNEL(IIO_TEMP, NULL, BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), AD5933_REG_TEMP_DATA, -1, 14), + /* Ring Channels */ + AD5933_CHANNEL(IIO_VOLTAGE, "real", 0, AD5933_REG_REAL_DATA, 0, 16), + AD5933_CHANNEL(IIO_VOLTAGE, "imag", 0, AD5933_REG_IMAG_DATA, 1, 16), +}; + +static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data) +{ + int ret; + + while (len--) { + ret = i2c_smbus_write_byte_data(client, reg++, *data++); + if (ret < 0) { + dev_err(&client->dev, "I2C write error\n"); + return ret; + } + } + return 0; +} + +static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data) +{ + int ret; + + while (len--) { + ret = i2c_smbus_read_byte_data(client, reg++); + if (ret < 0) { + dev_err(&client->dev, "I2C read error\n"); + return ret; + } + *data++ = ret; + } + return 0; +} + +static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd) +{ + unsigned char dat = st->ctrl_hb | cmd; + + return ad5933_i2c_write(st->client, + AD5933_REG_CONTROL_HB, 1, &dat); +} + +static int ad5933_reset(struct ad5933_state *st) +{ + unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET; + + return ad5933_i2c_write(st->client, + AD5933_REG_CONTROL_LB, 1, &dat); +} + +static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event) +{ + unsigned char val, timeout = AD5933_MAX_RETRIES; + int ret; + + while (timeout--) { + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val); + if (ret < 0) + return ret; + if (val & event) + return val; + cpu_relax(); + mdelay(1); + } + + return -EAGAIN; +} + +static int ad5933_set_freq(struct ad5933_state *st, + unsigned int reg, unsigned long freq) +{ + unsigned long long freqreg; + union { + __be32 d32; + u8 d8[4]; + } dat; + + freqreg = (u64)freq * (u64)(1 << 27); + do_div(freqreg, st->mclk_hz / 4); + + switch (reg) { + case AD5933_REG_FREQ_START: + st->freq_start = freq; + break; + case AD5933_REG_FREQ_INC: + st->freq_inc = freq; + break; + default: + return -EINVAL; + } + + dat.d32 = cpu_to_be32(freqreg); + return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]); +} + +static int ad5933_setup(struct ad5933_state *st) +{ + __be16 dat; + int ret; + + ret = ad5933_reset(st); + if (ret < 0) + return ret; + + ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000); + if (ret < 0) + return ret; + + ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200); + if (ret < 0) + return ret; + + st->settling_cycles = 10; + dat = cpu_to_be16(st->settling_cycles); + + ret = ad5933_i2c_write(st->client, + AD5933_REG_SETTLING_CYCLES, + 2, (u8 *)&dat); + if (ret < 0) + return ret; + + st->freq_points = 100; + dat = cpu_to_be16(st->freq_points); + + return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat); +} + +static void ad5933_calc_out_ranges(struct ad5933_state *st) +{ + int i; + unsigned int normalized_3v3[4] = {1980, 198, 383, 970}; + + for (i = 0; i < 4; i++) + st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300; +} + +/* + * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC + */ + +static ssize_t ad5933_show_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad5933_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret; + unsigned long long freqreg; + union { + __be32 d32; + u8 d8[4]; + } dat; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]); + iio_device_release_direct_mode(indio_dev); + if (ret < 0) + return ret; + + freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF; + + freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4); + do_div(freqreg, 1 << 27); + + return sprintf(buf, "%d\n", (int)freqreg); +} + +static ssize_t ad5933_store_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad5933_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + if (val > AD5933_MAX_OUTPUT_FREQ_Hz) + return -EINVAL; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad5933_set_freq(st, this_attr->address, val); + iio_device_release_direct_mode(indio_dev); + + return ret ? ret : len; +} + +static IIO_DEVICE_ATTR(out_altvoltage0_frequency_start, 0644, + ad5933_show_frequency, + ad5933_store_frequency, + AD5933_REG_FREQ_START); + +static IIO_DEVICE_ATTR(out_altvoltage0_frequency_increment, 0644, + ad5933_show_frequency, + ad5933_store_frequency, + AD5933_REG_FREQ_INC); + +static ssize_t ad5933_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad5933_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret = 0, len = 0; + + mutex_lock(&st->lock); + switch ((u32)this_attr->address) { + case AD5933_OUT_RANGE: + len = sprintf(buf, "%u\n", + st->range_avail[(st->ctrl_hb >> 1) & 0x3]); + break; + case AD5933_OUT_RANGE_AVAIL: + len = sprintf(buf, "%u %u %u %u\n", st->range_avail[0], + st->range_avail[3], st->range_avail[2], + st->range_avail[1]); + break; + case AD5933_OUT_SETTLING_CYCLES: + len = sprintf(buf, "%d\n", st->settling_cycles); + break; + case AD5933_IN_PGA_GAIN: + len = sprintf(buf, "%s\n", + (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ? + "1" : "0.2"); + break; + case AD5933_IN_PGA_GAIN_AVAIL: + len = sprintf(buf, "1 0.2\n"); + break; + case AD5933_FREQ_POINTS: + len = sprintf(buf, "%d\n", st->freq_points); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&st->lock); + return ret ? ret : len; +} + +static ssize_t ad5933_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad5933_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + u16 val; + int i, ret = 0; + __be16 dat; + + if (this_attr->address != AD5933_IN_PGA_GAIN) { + ret = kstrtou16(buf, 10, &val); + if (ret) + return ret; + } + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); + switch ((u32)this_attr->address) { + case AD5933_OUT_RANGE: + ret = -EINVAL; + for (i = 0; i < 4; i++) + if (val == st->range_avail[i]) { + st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3); + st->ctrl_hb |= AD5933_CTRL_RANGE(i); + ret = ad5933_cmd(st, 0); + break; + } + break; + case AD5933_IN_PGA_GAIN: + if (sysfs_streq(buf, "1")) { + st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1; + } else if (sysfs_streq(buf, "0.2")) { + st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1; + } else { + ret = -EINVAL; + break; + } + ret = ad5933_cmd(st, 0); + break; + case AD5933_OUT_SETTLING_CYCLES: + val = clamp(val, (u16)0, (u16)0x7FF); + st->settling_cycles = val; + + /* 2x, 4x handling, see datasheet */ + if (val > 1022) + val = (val >> 2) | (3 << 9); + else if (val > 511) + val = (val >> 1) | (1 << 9); + + dat = cpu_to_be16(val); + ret = ad5933_i2c_write(st->client, + AD5933_REG_SETTLING_CYCLES, + 2, (u8 *)&dat); + break; + case AD5933_FREQ_POINTS: + val = clamp(val, (u16)0, (u16)511); + st->freq_points = val; + + dat = cpu_to_be16(val); + ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, + (u8 *)&dat); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + return ret ? ret : len; +} + +static IIO_DEVICE_ATTR(out_voltage0_scale, 0644, + ad5933_show, + ad5933_store, + AD5933_OUT_RANGE); + +static IIO_DEVICE_ATTR(out_voltage0_scale_available, 0444, + ad5933_show, + NULL, + AD5933_OUT_RANGE_AVAIL); + +static IIO_DEVICE_ATTR(in_voltage0_scale, 0644, + ad5933_show, + ad5933_store, + AD5933_IN_PGA_GAIN); + +static IIO_DEVICE_ATTR(in_voltage0_scale_available, 0444, + ad5933_show, + NULL, + AD5933_IN_PGA_GAIN_AVAIL); + +static IIO_DEVICE_ATTR(out_altvoltage0_frequency_points, 0644, + ad5933_show, + ad5933_store, + AD5933_FREQ_POINTS); + +static IIO_DEVICE_ATTR(out_altvoltage0_settling_cycles, 0644, + ad5933_show, + ad5933_store, + AD5933_OUT_SETTLING_CYCLES); + +/* + * note: + * ideally we would handle the scale attributes via the iio_info + * (read|write)_raw methods, however this part is a untypical since we + * don't create dedicated sysfs channel attributes for out0 and in0. + */ +static struct attribute *ad5933_attributes[] = { + &iio_dev_attr_out_altvoltage0_raw.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_scale_available.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency_start.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency_increment.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_frequency_points.dev_attr.attr, + &iio_dev_attr_out_altvoltage0_settling_cycles.dev_attr.attr, + &iio_dev_attr_in_voltage0_scale.dev_attr.attr, + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad5933_attribute_group = { + .attrs = ad5933_attributes, +}; + +static int ad5933_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad5933_state *st = iio_priv(indio_dev); + __be16 dat; + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP); + if (ret < 0) + goto out; + ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID); + if (ret < 0) + goto out; + + ret = ad5933_i2c_read(st->client, + AD5933_REG_TEMP_DATA, + 2, (u8 *)&dat); + if (ret < 0) + goto out; + iio_device_release_direct_mode(indio_dev); + *val = sign_extend32(be16_to_cpu(dat), 13); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1000; + *val2 = 5; + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +out: + iio_device_release_direct_mode(indio_dev); + return ret; +} + +static const struct iio_info ad5933_info = { + .read_raw = ad5933_read_raw, + .attrs = &ad5933_attribute_group, +}; + +static int ad5933_ring_preenable(struct iio_dev *indio_dev) +{ + struct ad5933_state *st = iio_priv(indio_dev); + int ret; + + if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) + return -EINVAL; + + ret = ad5933_reset(st); + if (ret < 0) + return ret; + + ret = ad5933_cmd(st, AD5933_CTRL_STANDBY); + if (ret < 0) + return ret; + + ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ); + if (ret < 0) + return ret; + + st->state = AD5933_CTRL_INIT_START_FREQ; + + return 0; +} + +static int ad5933_ring_postenable(struct iio_dev *indio_dev) +{ + struct ad5933_state *st = iio_priv(indio_dev); + + /* + * AD5933_CTRL_INIT_START_FREQ: + * High Q complex circuits require a long time to reach steady state. + * To facilitate the measurement of such impedances, this mode allows + * the user full control of the settling time requirement before + * entering start frequency sweep mode where the impedance measurement + * takes place. In this mode the impedance is excited with the + * programmed start frequency (ad5933_ring_preenable), + * but no measurement takes place. + */ + + schedule_delayed_work(&st->work, + msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms)); + return 0; +} + +static int ad5933_ring_postdisable(struct iio_dev *indio_dev) +{ + struct ad5933_state *st = iio_priv(indio_dev); + + cancel_delayed_work_sync(&st->work); + return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN); +} + +static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = { + .preenable = ad5933_ring_preenable, + .postenable = ad5933_ring_postenable, + .postdisable = ad5933_ring_postdisable, +}; + +static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev) +{ + struct iio_buffer *buffer; + + buffer = iio_kfifo_allocate(); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(indio_dev, buffer); + + /* Ring buffer functions - here trigger setup related */ + indio_dev->setup_ops = &ad5933_ring_setup_ops; + + return 0; +} + +static void ad5933_work(struct work_struct *work) +{ + struct ad5933_state *st = container_of(work, + struct ad5933_state, work.work); + struct iio_dev *indio_dev = i2c_get_clientdata(st->client); + __be16 buf[2]; + int val[2]; + unsigned char status; + int ret; + + if (st->state == AD5933_CTRL_INIT_START_FREQ) { + /* start sweep */ + ad5933_cmd(st, AD5933_CTRL_START_SWEEP); + st->state = AD5933_CTRL_START_SWEEP; + schedule_delayed_work(&st->work, st->poll_time_jiffies); + return; + } + + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + if (ret) + return; + + if (status & AD5933_STAT_DATA_VALID) { + int scan_count = bitmap_weight(indio_dev->active_scan_mask, + indio_dev->masklength); + ret = ad5933_i2c_read(st->client, + test_bit(1, indio_dev->active_scan_mask) ? + AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, + scan_count * 2, (u8 *)buf); + if (ret) + return; + + if (scan_count == 2) { + val[0] = be16_to_cpu(buf[0]); + val[1] = be16_to_cpu(buf[1]); + } else { + val[0] = be16_to_cpu(buf[0]); + } + iio_push_to_buffers(indio_dev, val); + } else { + /* no data available - try again later */ + schedule_delayed_work(&st->work, st->poll_time_jiffies); + return; + } + + if (status & AD5933_STAT_SWEEP_DONE) { + /* + * last sample received - power down do + * nothing until the ring enable is toggled + */ + ad5933_cmd(st, AD5933_CTRL_POWER_DOWN); + } else { + /* we just received a valid datum, move on to the next */ + ad5933_cmd(st, AD5933_CTRL_INC_FREQ); + schedule_delayed_work(&st->work, st->poll_time_jiffies); + } +} + +static int ad5933_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct ad5933_state *st; + struct iio_dev *indio_dev; + unsigned long ext_clk_hz = 0; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + st->client = client; + + mutex_init(&st->lock); + + st->reg = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(&client->dev, "Failed to enable specified VDD supply\n"); + return ret; + } + ret = regulator_get_voltage(st->reg); + + if (ret < 0) + goto error_disable_reg; + + st->vref_mv = ret / 1000; + + st->mclk = devm_clk_get(&client->dev, "mclk"); + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { + ret = PTR_ERR(st->mclk); + goto error_disable_reg; + } + + if (!IS_ERR(st->mclk)) { + ret = clk_prepare_enable(st->mclk); + if (ret < 0) + goto error_disable_reg; + ext_clk_hz = clk_get_rate(st->mclk); + } + + if (ext_clk_hz) { + st->mclk_hz = ext_clk_hz; + st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK; + } else { + st->mclk_hz = AD5933_INT_OSC_FREQ_Hz; + st->ctrl_lb = AD5933_CTRL_INT_SYSCLK; + } + + ad5933_calc_out_ranges(st); + INIT_DELAYED_WORK(&st->work, ad5933_work); + st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ad5933_info; + indio_dev->name = id->name; + indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE); + indio_dev->channels = ad5933_channels; + indio_dev->num_channels = ARRAY_SIZE(ad5933_channels); + + ret = ad5933_register_ring_funcs_and_init(indio_dev); + if (ret) + goto error_disable_mclk; + + ret = ad5933_setup(st); + if (ret) + goto error_unreg_ring; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_unreg_ring; + + return 0; + +error_unreg_ring: + iio_kfifo_free(indio_dev->buffer); +error_disable_mclk: + clk_disable_unprepare(st->mclk); +error_disable_reg: + regulator_disable(st->reg); + + return ret; +} + +static int ad5933_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ad5933_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_kfifo_free(indio_dev->buffer); + regulator_disable(st->reg); + clk_disable_unprepare(st->mclk); + + return 0; +} + +static const struct i2c_device_id ad5933_id[] = { + { "ad5933", 0 }, + { "ad5934", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, ad5933_id); + +static const struct of_device_id ad5933_of_match[] = { + { .compatible = "adi,ad5933" }, + { .compatible = "adi,ad5934" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, ad5933_of_match); + +static struct i2c_driver ad5933_driver = { + .driver = { + .name = "ad5933", + .of_match_table = ad5933_of_match, + }, + .probe = ad5933_probe, + .remove = ad5933_remove, + .id_table = ad5933_id, +}; +module_i2c_driver(ad5933_driver); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/impedance-analyzer/Kconfig b/drivers/staging/iio/impedance-analyzer/Kconfig deleted file mode 100644 index b9a679cdd146..000000000000 --- a/drivers/staging/iio/impedance-analyzer/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# -# Impedance Converter, Network Analyzer drivers -# -menu "Network Analyzer, Impedance Converters" - -config AD5933 - tristate "Analog Devices AD5933, AD5934 driver" - depends on I2C - select IIO_BUFFER - select IIO_KFIFO_BUF - help - Say yes here to build support for Analog Devices Impedance Converter, - Network Analyzer, AD5933/4. - - To compile this driver as a module, choose M here: the - module will be called ad5933. - -endmenu diff --git a/drivers/staging/iio/impedance-analyzer/Makefile b/drivers/staging/iio/impedance-analyzer/Makefile deleted file mode 100644 index 7604d786583e..000000000000 --- a/drivers/staging/iio/impedance-analyzer/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for Impedance Converter, Network Analyzer drivers -# - -obj-$(CONFIG_AD5933) += ad5933.o diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c deleted file mode 100644 index 262415bc659d..000000000000 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ /dev/null @@ -1,811 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * AD5933 AD5934 Impedance Converter, Network Analyzer - * - * Copyright 2011 Analog Devices Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* AD5933/AD5934 Registers */ -#define AD5933_REG_CONTROL_HB 0x80 /* R/W, 1 byte */ -#define AD5933_REG_CONTROL_LB 0x81 /* R/W, 1 byte */ -#define AD5933_REG_FREQ_START 0x82 /* R/W, 3 bytes */ -#define AD5933_REG_FREQ_INC 0x85 /* R/W, 3 bytes */ -#define AD5933_REG_INC_NUM 0x88 /* R/W, 2 bytes, 9 bit */ -#define AD5933_REG_SETTLING_CYCLES 0x8A /* R/W, 2 bytes */ -#define AD5933_REG_STATUS 0x8F /* R, 1 byte */ -#define AD5933_REG_TEMP_DATA 0x92 /* R, 2 bytes*/ -#define AD5933_REG_REAL_DATA 0x94 /* R, 2 bytes*/ -#define AD5933_REG_IMAG_DATA 0x96 /* R, 2 bytes*/ - -/* AD5933_REG_CONTROL_HB Bits */ -#define AD5933_CTRL_INIT_START_FREQ (0x1 << 4) -#define AD5933_CTRL_START_SWEEP (0x2 << 4) -#define AD5933_CTRL_INC_FREQ (0x3 << 4) -#define AD5933_CTRL_REPEAT_FREQ (0x4 << 4) -#define AD5933_CTRL_MEASURE_TEMP (0x9 << 4) -#define AD5933_CTRL_POWER_DOWN (0xA << 4) -#define AD5933_CTRL_STANDBY (0xB << 4) - -#define AD5933_CTRL_RANGE_2000mVpp (0x0 << 1) -#define AD5933_CTRL_RANGE_200mVpp (0x1 << 1) -#define AD5933_CTRL_RANGE_400mVpp (0x2 << 1) -#define AD5933_CTRL_RANGE_1000mVpp (0x3 << 1) -#define AD5933_CTRL_RANGE(x) ((x) << 1) - -#define AD5933_CTRL_PGA_GAIN_1 (0x1 << 0) -#define AD5933_CTRL_PGA_GAIN_5 (0x0 << 0) - -/* AD5933_REG_CONTROL_LB Bits */ -#define AD5933_CTRL_RESET (0x1 << 4) -#define AD5933_CTRL_INT_SYSCLK (0x0 << 3) -#define AD5933_CTRL_EXT_SYSCLK (0x1 << 3) - -/* AD5933_REG_STATUS Bits */ -#define AD5933_STAT_TEMP_VALID (0x1 << 0) -#define AD5933_STAT_DATA_VALID (0x1 << 1) -#define AD5933_STAT_SWEEP_DONE (0x1 << 2) - -/* I2C Block Commands */ -#define AD5933_I2C_BLOCK_WRITE 0xA0 -#define AD5933_I2C_BLOCK_READ 0xA1 -#define AD5933_I2C_ADDR_POINTER 0xB0 - -/* Device Specs */ -#define AD5933_INT_OSC_FREQ_Hz 16776000 -#define AD5933_MAX_OUTPUT_FREQ_Hz 100000 -#define AD5933_MAX_RETRIES 100 - -#define AD5933_OUT_RANGE 1 -#define AD5933_OUT_RANGE_AVAIL 2 -#define AD5933_OUT_SETTLING_CYCLES 3 -#define AD5933_IN_PGA_GAIN 4 -#define AD5933_IN_PGA_GAIN_AVAIL 5 -#define AD5933_FREQ_POINTS 6 - -#define AD5933_POLL_TIME_ms 10 -#define AD5933_INIT_EXCITATION_TIME_ms 100 - -struct ad5933_state { - struct i2c_client *client; - struct regulator *reg; - struct clk *mclk; - struct delayed_work work; - struct mutex lock; /* Protect sensor state */ - unsigned long mclk_hz; - unsigned char ctrl_hb; - unsigned char ctrl_lb; - unsigned int range_avail[4]; - unsigned short vref_mv; - unsigned short settling_cycles; - unsigned short freq_points; - unsigned int freq_start; - unsigned int freq_inc; - unsigned int state; - unsigned int poll_time_jiffies; -}; - -#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \ - _scan_index, _realbits) { \ - .type = (_type), \ - .extend_name = (_extend_name), \ - .info_mask_separate = (_info_mask_separate), \ - .address = (_address), \ - .scan_index = (_scan_index), \ - .scan_type = { \ - .sign = 's', \ - .realbits = (_realbits), \ - .storagebits = 16, \ - }, \ -} - -static const struct iio_chan_spec ad5933_channels[] = { - AD5933_CHANNEL(IIO_TEMP, NULL, BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_SCALE), AD5933_REG_TEMP_DATA, -1, 14), - /* Ring Channels */ - AD5933_CHANNEL(IIO_VOLTAGE, "real", 0, AD5933_REG_REAL_DATA, 0, 16), - AD5933_CHANNEL(IIO_VOLTAGE, "imag", 0, AD5933_REG_IMAG_DATA, 1, 16), -}; - -static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data) -{ - int ret; - - while (len--) { - ret = i2c_smbus_write_byte_data(client, reg++, *data++); - if (ret < 0) { - dev_err(&client->dev, "I2C write error\n"); - return ret; - } - } - return 0; -} - -static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data) -{ - int ret; - - while (len--) { - ret = i2c_smbus_read_byte_data(client, reg++); - if (ret < 0) { - dev_err(&client->dev, "I2C read error\n"); - return ret; - } - *data++ = ret; - } - return 0; -} - -static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd) -{ - unsigned char dat = st->ctrl_hb | cmd; - - return ad5933_i2c_write(st->client, - AD5933_REG_CONTROL_HB, 1, &dat); -} - -static int ad5933_reset(struct ad5933_state *st) -{ - unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET; - - return ad5933_i2c_write(st->client, - AD5933_REG_CONTROL_LB, 1, &dat); -} - -static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event) -{ - unsigned char val, timeout = AD5933_MAX_RETRIES; - int ret; - - while (timeout--) { - ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val); - if (ret < 0) - return ret; - if (val & event) - return val; - cpu_relax(); - mdelay(1); - } - - return -EAGAIN; -} - -static int ad5933_set_freq(struct ad5933_state *st, - unsigned int reg, unsigned long freq) -{ - unsigned long long freqreg; - union { - __be32 d32; - u8 d8[4]; - } dat; - - freqreg = (u64)freq * (u64)(1 << 27); - do_div(freqreg, st->mclk_hz / 4); - - switch (reg) { - case AD5933_REG_FREQ_START: - st->freq_start = freq; - break; - case AD5933_REG_FREQ_INC: - st->freq_inc = freq; - break; - default: - return -EINVAL; - } - - dat.d32 = cpu_to_be32(freqreg); - return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]); -} - -static int ad5933_setup(struct ad5933_state *st) -{ - __be16 dat; - int ret; - - ret = ad5933_reset(st); - if (ret < 0) - return ret; - - ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000); - if (ret < 0) - return ret; - - ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200); - if (ret < 0) - return ret; - - st->settling_cycles = 10; - dat = cpu_to_be16(st->settling_cycles); - - ret = ad5933_i2c_write(st->client, - AD5933_REG_SETTLING_CYCLES, - 2, (u8 *)&dat); - if (ret < 0) - return ret; - - st->freq_points = 100; - dat = cpu_to_be16(st->freq_points); - - return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat); -} - -static void ad5933_calc_out_ranges(struct ad5933_state *st) -{ - int i; - unsigned int normalized_3v3[4] = {1980, 198, 383, 970}; - - for (i = 0; i < 4; i++) - st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300; -} - -/* - * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC - */ - -static ssize_t ad5933_show_frequency(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad5933_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - int ret; - unsigned long long freqreg; - union { - __be32 d32; - u8 d8[4]; - } dat; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]); - iio_device_release_direct_mode(indio_dev); - if (ret < 0) - return ret; - - freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF; - - freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4); - do_div(freqreg, 1 << 27); - - return sprintf(buf, "%d\n", (int)freqreg); -} - -static ssize_t ad5933_store_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad5933_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - unsigned long val; - int ret; - - ret = kstrtoul(buf, 10, &val); - if (ret) - return ret; - - if (val > AD5933_MAX_OUTPUT_FREQ_Hz) - return -EINVAL; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - ret = ad5933_set_freq(st, this_attr->address, val); - iio_device_release_direct_mode(indio_dev); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(out_altvoltage0_frequency_start, 0644, - ad5933_show_frequency, - ad5933_store_frequency, - AD5933_REG_FREQ_START); - -static IIO_DEVICE_ATTR(out_altvoltage0_frequency_increment, 0644, - ad5933_show_frequency, - ad5933_store_frequency, - AD5933_REG_FREQ_INC); - -static ssize_t ad5933_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad5933_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - int ret = 0, len = 0; - - mutex_lock(&st->lock); - switch ((u32)this_attr->address) { - case AD5933_OUT_RANGE: - len = sprintf(buf, "%u\n", - st->range_avail[(st->ctrl_hb >> 1) & 0x3]); - break; - case AD5933_OUT_RANGE_AVAIL: - len = sprintf(buf, "%u %u %u %u\n", st->range_avail[0], - st->range_avail[3], st->range_avail[2], - st->range_avail[1]); - break; - case AD5933_OUT_SETTLING_CYCLES: - len = sprintf(buf, "%d\n", st->settling_cycles); - break; - case AD5933_IN_PGA_GAIN: - len = sprintf(buf, "%s\n", - (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ? - "1" : "0.2"); - break; - case AD5933_IN_PGA_GAIN_AVAIL: - len = sprintf(buf, "1 0.2\n"); - break; - case AD5933_FREQ_POINTS: - len = sprintf(buf, "%d\n", st->freq_points); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&st->lock); - return ret ? ret : len; -} - -static ssize_t ad5933_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad5933_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - u16 val; - int i, ret = 0; - __be16 dat; - - if (this_attr->address != AD5933_IN_PGA_GAIN) { - ret = kstrtou16(buf, 10, &val); - if (ret) - return ret; - } - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - switch ((u32)this_attr->address) { - case AD5933_OUT_RANGE: - ret = -EINVAL; - for (i = 0; i < 4; i++) - if (val == st->range_avail[i]) { - st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3); - st->ctrl_hb |= AD5933_CTRL_RANGE(i); - ret = ad5933_cmd(st, 0); - break; - } - break; - case AD5933_IN_PGA_GAIN: - if (sysfs_streq(buf, "1")) { - st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1; - } else if (sysfs_streq(buf, "0.2")) { - st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1; - } else { - ret = -EINVAL; - break; - } - ret = ad5933_cmd(st, 0); - break; - case AD5933_OUT_SETTLING_CYCLES: - val = clamp(val, (u16)0, (u16)0x7FF); - st->settling_cycles = val; - - /* 2x, 4x handling, see datasheet */ - if (val > 1022) - val = (val >> 2) | (3 << 9); - else if (val > 511) - val = (val >> 1) | (1 << 9); - - dat = cpu_to_be16(val); - ret = ad5933_i2c_write(st->client, - AD5933_REG_SETTLING_CYCLES, - 2, (u8 *)&dat); - break; - case AD5933_FREQ_POINTS: - val = clamp(val, (u16)0, (u16)511); - st->freq_points = val; - - dat = cpu_to_be16(val); - ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, - (u8 *)&dat); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(out_voltage0_scale, 0644, - ad5933_show, - ad5933_store, - AD5933_OUT_RANGE); - -static IIO_DEVICE_ATTR(out_voltage0_scale_available, 0444, - ad5933_show, - NULL, - AD5933_OUT_RANGE_AVAIL); - -static IIO_DEVICE_ATTR(in_voltage0_scale, 0644, - ad5933_show, - ad5933_store, - AD5933_IN_PGA_GAIN); - -static IIO_DEVICE_ATTR(in_voltage0_scale_available, 0444, - ad5933_show, - NULL, - AD5933_IN_PGA_GAIN_AVAIL); - -static IIO_DEVICE_ATTR(out_altvoltage0_frequency_points, 0644, - ad5933_show, - ad5933_store, - AD5933_FREQ_POINTS); - -static IIO_DEVICE_ATTR(out_altvoltage0_settling_cycles, 0644, - ad5933_show, - ad5933_store, - AD5933_OUT_SETTLING_CYCLES); - -/* - * note: - * ideally we would handle the scale attributes via the iio_info - * (read|write)_raw methods, however this part is a untypical since we - * don't create dedicated sysfs channel attributes for out0 and in0. - */ -static struct attribute *ad5933_attributes[] = { - &iio_dev_attr_out_altvoltage0_raw.dev_attr.attr, - &iio_dev_attr_out_altvoltage0_scale_available.dev_attr.attr, - &iio_dev_attr_out_altvoltage0_frequency_start.dev_attr.attr, - &iio_dev_attr_out_altvoltage0_frequency_increment.dev_attr.attr, - &iio_dev_attr_out_altvoltage0_frequency_points.dev_attr.attr, - &iio_dev_attr_out_altvoltage0_settling_cycles.dev_attr.attr, - &iio_dev_attr_in_voltage0_scale.dev_attr.attr, - &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group ad5933_attribute_group = { - .attrs = ad5933_attributes, -}; - -static int ad5933_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) -{ - struct ad5933_state *st = iio_priv(indio_dev); - __be16 dat; - int ret; - - switch (m) { - case IIO_CHAN_INFO_RAW: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP); - if (ret < 0) - goto out; - ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID); - if (ret < 0) - goto out; - - ret = ad5933_i2c_read(st->client, - AD5933_REG_TEMP_DATA, - 2, (u8 *)&dat); - if (ret < 0) - goto out; - iio_device_release_direct_mode(indio_dev); - *val = sign_extend32(be16_to_cpu(dat), 13); - - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = 1000; - *val2 = 5; - return IIO_VAL_FRACTIONAL_LOG2; - } - - return -EINVAL; -out: - iio_device_release_direct_mode(indio_dev); - return ret; -} - -static const struct iio_info ad5933_info = { - .read_raw = ad5933_read_raw, - .attrs = &ad5933_attribute_group, -}; - -static int ad5933_ring_preenable(struct iio_dev *indio_dev) -{ - struct ad5933_state *st = iio_priv(indio_dev); - int ret; - - if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) - return -EINVAL; - - ret = ad5933_reset(st); - if (ret < 0) - return ret; - - ret = ad5933_cmd(st, AD5933_CTRL_STANDBY); - if (ret < 0) - return ret; - - ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ); - if (ret < 0) - return ret; - - st->state = AD5933_CTRL_INIT_START_FREQ; - - return 0; -} - -static int ad5933_ring_postenable(struct iio_dev *indio_dev) -{ - struct ad5933_state *st = iio_priv(indio_dev); - - /* - * AD5933_CTRL_INIT_START_FREQ: - * High Q complex circuits require a long time to reach steady state. - * To facilitate the measurement of such impedances, this mode allows - * the user full control of the settling time requirement before - * entering start frequency sweep mode where the impedance measurement - * takes place. In this mode the impedance is excited with the - * programmed start frequency (ad5933_ring_preenable), - * but no measurement takes place. - */ - - schedule_delayed_work(&st->work, - msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms)); - return 0; -} - -static int ad5933_ring_postdisable(struct iio_dev *indio_dev) -{ - struct ad5933_state *st = iio_priv(indio_dev); - - cancel_delayed_work_sync(&st->work); - return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN); -} - -static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = { - .preenable = ad5933_ring_preenable, - .postenable = ad5933_ring_postenable, - .postdisable = ad5933_ring_postdisable, -}; - -static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev) -{ - struct iio_buffer *buffer; - - buffer = iio_kfifo_allocate(); - if (!buffer) - return -ENOMEM; - - iio_device_attach_buffer(indio_dev, buffer); - - /* Ring buffer functions - here trigger setup related */ - indio_dev->setup_ops = &ad5933_ring_setup_ops; - - return 0; -} - -static void ad5933_work(struct work_struct *work) -{ - struct ad5933_state *st = container_of(work, - struct ad5933_state, work.work); - struct iio_dev *indio_dev = i2c_get_clientdata(st->client); - __be16 buf[2]; - int val[2]; - unsigned char status; - int ret; - - if (st->state == AD5933_CTRL_INIT_START_FREQ) { - /* start sweep */ - ad5933_cmd(st, AD5933_CTRL_START_SWEEP); - st->state = AD5933_CTRL_START_SWEEP; - schedule_delayed_work(&st->work, st->poll_time_jiffies); - return; - } - - ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); - if (ret) - return; - - if (status & AD5933_STAT_DATA_VALID) { - int scan_count = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength); - ret = ad5933_i2c_read(st->client, - test_bit(1, indio_dev->active_scan_mask) ? - AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, - scan_count * 2, (u8 *)buf); - if (ret) - return; - - if (scan_count == 2) { - val[0] = be16_to_cpu(buf[0]); - val[1] = be16_to_cpu(buf[1]); - } else { - val[0] = be16_to_cpu(buf[0]); - } - iio_push_to_buffers(indio_dev, val); - } else { - /* no data available - try again later */ - schedule_delayed_work(&st->work, st->poll_time_jiffies); - return; - } - - if (status & AD5933_STAT_SWEEP_DONE) { - /* - * last sample received - power down do - * nothing until the ring enable is toggled - */ - ad5933_cmd(st, AD5933_CTRL_POWER_DOWN); - } else { - /* we just received a valid datum, move on to the next */ - ad5933_cmd(st, AD5933_CTRL_INC_FREQ); - schedule_delayed_work(&st->work, st->poll_time_jiffies); - } -} - -static int ad5933_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int ret; - struct ad5933_state *st; - struct iio_dev *indio_dev; - unsigned long ext_clk_hz = 0; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - st->client = client; - - mutex_init(&st->lock); - - st->reg = devm_regulator_get(&client->dev, "vdd"); - if (IS_ERR(st->reg)) - return PTR_ERR(st->reg); - - ret = regulator_enable(st->reg); - if (ret) { - dev_err(&client->dev, "Failed to enable specified VDD supply\n"); - return ret; - } - ret = regulator_get_voltage(st->reg); - - if (ret < 0) - goto error_disable_reg; - - st->vref_mv = ret / 1000; - - st->mclk = devm_clk_get(&client->dev, "mclk"); - if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { - ret = PTR_ERR(st->mclk); - goto error_disable_reg; - } - - if (!IS_ERR(st->mclk)) { - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - goto error_disable_reg; - ext_clk_hz = clk_get_rate(st->mclk); - } - - if (ext_clk_hz) { - st->mclk_hz = ext_clk_hz; - st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK; - } else { - st->mclk_hz = AD5933_INT_OSC_FREQ_Hz; - st->ctrl_lb = AD5933_CTRL_INT_SYSCLK; - } - - ad5933_calc_out_ranges(st); - INIT_DELAYED_WORK(&st->work, ad5933_work); - st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms); - - indio_dev->dev.parent = &client->dev; - indio_dev->info = &ad5933_info; - indio_dev->name = id->name; - indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE); - indio_dev->channels = ad5933_channels; - indio_dev->num_channels = ARRAY_SIZE(ad5933_channels); - - ret = ad5933_register_ring_funcs_and_init(indio_dev); - if (ret) - goto error_disable_mclk; - - ret = ad5933_setup(st); - if (ret) - goto error_unreg_ring; - - ret = iio_device_register(indio_dev); - if (ret) - goto error_unreg_ring; - - return 0; - -error_unreg_ring: - iio_kfifo_free(indio_dev->buffer); -error_disable_mclk: - clk_disable_unprepare(st->mclk); -error_disable_reg: - regulator_disable(st->reg); - - return ret; -} - -static int ad5933_remove(struct i2c_client *client) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(client); - struct ad5933_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - iio_kfifo_free(indio_dev->buffer); - regulator_disable(st->reg); - clk_disable_unprepare(st->mclk); - - return 0; -} - -static const struct i2c_device_id ad5933_id[] = { - { "ad5933", 0 }, - { "ad5934", 0 }, - {} -}; - -MODULE_DEVICE_TABLE(i2c, ad5933_id); - -static const struct of_device_id ad5933_of_match[] = { - { .compatible = "adi,ad5933" }, - { .compatible = "adi,ad5934" }, - { }, -}; - -MODULE_DEVICE_TABLE(of, ad5933_of_match); - -static struct i2c_driver ad5933_driver = { - .driver = { - .name = "ad5933", - .of_match_table = ad5933_of_match, - }, - .probe = ad5933_probe, - .remove = ad5933_remove, - .id_table = ad5933_id, -}; -module_i2c_driver(ad5933_driver); - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer"); -MODULE_LICENSE("GPL v2");