| Message ID | 20190404205720.66804920@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL,V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle. | expand |
On Thu, Apr 04, 2019 at 08:57:20PM +0100, Jonathan Cameron wrote: > The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55: > > Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2 Looks good, now pulled and pushed out. greg k-h
The following changes since commit b397f82585c3101dcf92642dd359891e66d00c55: Merge 5.1-rc3 into staging-next (2019-04-01 07:49:24 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a-2 for you to fetch changes up to df1d80aee963480c5c2938c64ec0ac3e4a0df2e0: iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion (2019-04-04 20:21:15 +0100) ---------------------------------------------------------------- First set of new device support, features and fixes for IIO in the 5.2 cycle Staging graduations * ad7780 - Move this ADC driver out of staging. Included adding some new features along the way (see below). Also added DT bindings. New device support * adis16480 - Support the ADIS16495 and ADIS16497 IMU devices making heavy use of refactoring of various aspects of the driver in precursor patches. * lsm6dsx - Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor. - Support for the LSM6DS0X * matbotix mb1232 - New driver for this ultrasound ranging device family. Including bindings. - Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137. * max31856 - New driver for this thermocouple temperature sensor. * meson saradc - Support the Meson-G12A (ID addition only). * stmpe-adc - New driver supporting generic ADC alongside touchscreen support which previously existed. Includes DT bindings. * vcnl4000 - Support for the vcln4040 proximity and light sensor, including adding DT bindings for this and parts previously supported. Features * core - Allow reading of mount matrices from ACPI in addition to DT. - Common binding for theromcouple types. * ad5933 - Add ABI docs as there are a few 'unsual' elements about this device - perhaps because it's our only impedance analyser. * ad7780 - Add gain and filter gpio support + readback of current gain and filter. * adis16480 - Allow selection fo the dataready pin to be used. - Device tree ID table and binding documentation. - Support external clock modes, including new bindings. * bma180 - Mount matrix support. * bmc150 - Mount matrix support. * bmg160 - Mount matrix support. - DT id table and bindings doc. * bmp280 - Put calibration data into the entropy pool. * hmc5843 - Mount matrix support. * itg3200 - Mount matrix support. * kxcjk1013 - Device tree id table, and binding docs. * lpc32xx - Add scale when regulator specified including DT docs for regulator. * pms7003 - Add device IDs for all supported parts to driver and binding. * stm32-dfsdm - Enable hw consumer support, scan mode control and a complex set of triggered buffer modes. - Power management. * stm32-lptimer-counter - power management. - Document the pinctrl sleep state binding. * ti-ads7950 - GPIO pin support. Cleanups, minor fixes * core - Use bitmap_zalloc to make it explicit that is what we are doing. - Tidy up all the Kconfig files (which had slowly gotten messy) - Fix a forwards definition missing issue in iio/driver.h * ad sigma delta core - Improve handling of SPI bus locking vs CS assertion. This has been wrong a long time so not rushing this in. * ad5064 - Mlock to local lock. * ad5933 (staging cleanup) - Multiline comment fixes. - Include ordering. - SPDX. - Tidy up Kconfig help which was a bit missleading. - Change some non standard attributes to ABI defined ones. * ad7124 - White space fix. * ad7192 - White space. - Use DT clock binding. - Improve error reporting. - Platform data to DT conversion. - Use read_avail callback, mostly to avoid the endless series of patches from new contributors trying to falsely put spaces around the negative sign. * ad7280a - Add brackets to macros to avoid potential precedence isseus. - Add temp vars for event codes to reduce indent and improved readability. - Clean out som CamelCase notation. - White space. * ad7606 - Fix broken file naming in MAINTAINERS. * ad7780 - Missing switch defaults to supress warnings and harden the code slightly. - Set pattern masks more directly. - Add ID values and masks for all supported chips. - SPDX + add Renato as a copyright holder as he has done a lot of work on this driver. - Add brackets to macros to avoid potential precedence issues. * ad7923 - White space fixes. - Use BIT macro to improve readability. - Add brackets to macros to avoid potential precedence issues. - Tidy up a null comparisom. * ad9523 - Fix a typo in naming of variables. * adis16400 - Combine trigger file into main code as no advantage in separate files. Rename core file to just adis16400. - Squash the header into the c file now there is only one file. - Generalize burst mode to support new variants. * ak8975 - Local variable to improve readability around mount matrix support. * as3935 - Avoid potential race by ensuring remove does exact opposite of probe rather than a slightly different order. * cross_ec - Drop some unnecessary includes. - Fix some warning and the slightly 'unusual' code. - Add some docs for non obvious function. - SPDX * hmc5843 - Potential unhandled error case. * iio trigger core - Print an error if there is no available irq due to max consumers per trigger being set to low. * iio loop trigger - Drop an unlikely on IS_ERR as IS_ERR already has the annotation. * ingenic-adc - Drop a redundant dev_err call as devm_ioremap_resource reports the same internally. * lmp91000 - Drop some unncessary parentheses and white space tidy up. - Invert and if statement to improve readability. - Fix a wrong error message. * lpc32xx - Header sorting + drop some unused ones. * mma8542 - Mark a switch fallthrough. * mpu6050 - Add a local variable to improve code readability around mount matrix support. * mxs-lradc-adc - Handle devm_iio_trigger_alloc failure. * sps30 - Fix up a kernel version in the ABI docs. * srf04 - DT binding doc converted to yaml. * ssp_sensors - Supress a clang build warning due to lack of visibility of conditional within a iio_push_to_buffers_with_timestamp. (reasonable false warning!) * st_accel - Drop pointless less than 0 comparisom of unsigned int. * stm32-dfsdm - Improve accuracy of spi_master_frequency calculation. - Improve calculation fo sampling frequency. - Rework various internals to simplify adding triggered buffer support. - Claim direct mode to avoid racing around read_raw and being in buffered mode. * stmpe - Fix a clang false positive warning. * ti-ads7950 - Use local lock rather than using the core mlock when not locking around the device mode. * vcnl4000 - Use word writes instead of byte writes. It seems byte writes are fine for some parts (undocument) but not others that the driver will shortly support. Other * mailmap - Add email address change for Sean Nyekjaer. Update in relevant drivers ---------------------------------------------------------------- Alexandru Ardelean (5): iio: imu: adis16400: move trigger handler into adis16400_core iio: imu: adis: generalize burst mode support iio: imu: adis16400: move burst logic to ADIS lib iio: imu: adis16400: rename adis16400_core.c -> adi16400.c iio: imu: adis16400: move adis16400.h into adis16400.c Anderson Reis (3): iio:potentiostat:lmp91000: reduce line width and remove blank line iio:potentiostat:lmp91000: invert if statement iio:potentiostat:lmp91000: change dev_err message Andreas Klinger (5): dt-bindings: Add vendor prefix for MaxBotix dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers mb1232.c: add distance iio sensor with i2c MAINTAINERS: add maintainer for maxbotix ultrasonic driver devantech-srf04.yaml: transform DT binding to YAML Andy Shevchenko (3): iio: Allow to read mount matrix from ACPI iio: buffer: Switch to bitmap_zalloc() iio: Make possible to include driver.h first Angus Ainslie (Purism) (5): iio: light: vcnl4000 use word writes instead of byte writes iio: light: vcnl4000 add devicetree hooks dt-bindings: iio: light: add vcnl4000 devicetree bindings iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor dt-bindings: iio: light: add vcnl4040 devicetree bindings Bárbara Fernandes (4): iio:adc:ad7923: Align broken line to parenthesis iio:adc:ad7923: Use BIT macro instead of bitshift iio:adc:ad7923: Put macro argument between ()'s iio:adc:ad7923: Rewrite comparison to NULL Chengguang Xu (1): iio: remove redundant unlikely annotation Colin Ian King (2): iio: st_accel: remove redundant unsigned less than zero check iio: adc: ad7124 fix indentation issue, remove extra tab Cristian Sicilia (4): staging: iio: adc: ad7280a: Avoid precedence issues in macro staging: iio: adc: ad7280a: Adding temp var to improve readability staging: iio: adc: ad7280a: Remove CamelCase notation staging: iio: adc: ad7280a: Tab alignment Enric Balletbo i Serra (1): iio: cros_ec: Switch to SPDX identifier. Enrico Weigelt, metux IT consult (1): drivers: iio: Kconfig: pedantic cleanup Fabrice Gasnier (12): dt-bindings: iio: stm32-lptimer-counter: document pinctrl sleep state iio: counter: stm32-lptimer: Add power management support iio: adc: stm32-dfsdm: make spi_master_freq more accurate iio: adc: stm32-dfsdm: continuous mode depends on current mode iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma() iio: adc: stm32-dfsdm: move dma slave config to start routine iio: adc: stm32-dfsdm: enable hw consumer iio: adc: stm32-dfsdm: add support for scan mode iio: adc: stm32-dfsdm: add support for buffer modes iio: adc: stm32-dfsdm: claim direct mode for raw read and settings iio: adc: stm32-dfsdm: improve sampling frequency accuracy iio: adc: stm32-dfsdm: add PM support Gregory CLEMENT (4): iio: adc: lpc32xx: Sort headers iio: adc: lpc32xx: Cleanup headers iio: adc: lpc32xx: Add scale feature dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply Guenter Roeck (1): iio: cros_ec: Drop unnecessary include files Gustavo A. R. Silva (2): iio: mma8452: mark expected switch fall-through iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe Gwendal Grignou (1): iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc H. Nikolaus Schaller (10): iio: accel: bmc150: add mount matrix support iio: accel: bma180: add mount matrix support iio: gyro: bmg160: add mount matrix support iio: gyro: itg3200: add mount matrix support iio: magnetometer: bmc150: add mount matrix support iio: magnetometer: hmc5843: add mount matrix support iio: mpu6050: improve code readability iio: ak8975: improve code readability iio: gyro: bmg160: add device tree compatibility table dt-bindings: iio: add Bosch BMG160 gyroscope sensor Jonathan Cameron (1): iio:dac:ad5064 mlock cleanup - move to a local lock. Justin Chen (2): iio: adc: ti-ads7950: Fix improper use of mlock iio: adc: ti-ads7950: add GPIO support Kangjie Lu (2): iio: adc: fix a potential NULL pointer dereference iio: hmc5843: fix potential NULL pointer dereferences Lars-Peter Clausen (2): iio: frequency: ad9523: Fix typo in ad9523_platform_data iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion Linus Walleij (1): iio: pressure: bmp280: BMP280 calibration to entropy Lorenzo Bianconi (4): iio: imu: st_lsm6dsx: add support to ASM330LHH dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings iio: imu: st_lsm6dsx: add support to LSM6DSOX dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings Lucas Oshiro (1): iio:potentiostat:lmp91000: remove unnecessary parentheses Marcelo Schmitt (6): staging: iio: ad5933: change multi-line comment style staging: iio: ad5933: organize includes staging: iio: ad5933: add SPDX identifier staging: iio: ad5933: change help rule message staging: iio: ad5933: add ABI documentation staging: iio: ad5933: change attributes to match ABI Mathieu Othacehe (1): iio: trigger: Print an error if there is no available irq Mircea Caprioru (5): staging: iio: adc: ad7192: Fix identation staging: iio: adc: ad7192: Use DT clock binding staging: iio: adc: ad7192: Report error directly in ad7192_setup staging: iio: adc: ad7192: Convert platform data to DT properties staging: iio: adc: ad7192: Use read_avail for available attributes Nathan Chancellor (2): iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr Neil Armstrong (2): dt-bindings: iio: adc: document the Meson G12A support iio: adc: meson-saradc: add support for Meson G12A Paresh Chaudhary (2): iio:temperature:max31856:Add device tree bind info iio:temperature: Add MAX31856 thermocouple support Patrick Havelange (1): dt-bindings: iio/temperature: Add thermocouple types (and doc) Renato Lui Geh (11): staging: iio: ad7780: add gain & filter gpio support staging: iio: ad7780: add missing switch default case staging: iio: ad7780: add gain reading to ad778x staging: iio: ad7780: add filter reading to ad778x staging: iio: ad7780: set pattern values and masks directly staging:iio:ad7780: add chip ID values and mask staging: iio: ad7780: move regulator to after GPIO init staging: iio: ad7780: add SPDX identifier staging: iio: ad7780: add new copyright holder staging: iio: ad7780: moving ad7780 out of staging staging: iio: ad7780: add device tree binding Robert Yang (3): dt-bindings: Add vendor prefix for Kionix, Inc. dt-bindings: iio: accel: kxcjk1013: Add device tree binding documentation iio: accel: kxcjk1013: Add device tree support Sean Nyekjaer (3): mailmap: Update email for Sean Nyekjaer iio: adc: ti-ads8688: Update the module author email address iio: dac: ti-dac5571: Update the module author email address Stefan Popa (10): iio: imu: adis16480: Add support for configurable drdy indicator iio: imu: adis16480: Add OF device ID table iio: imu: adis16480: Treat temperature scale in a generic way iio: imu: adis16480: Calculate the sampling frequency in a generic way iio: imu: adis16480: Deal with filter freq in a generic way iio: imu: adis16480: Add support for ADIS1649x family of devices iio: imu: adis16480: Add docs for ADIS16480 IMU iio: imu: adis16480: Add support for external clock dt-bindings: iio: imu: adis16480: Document external clock MAINTAINERS: Fix the link to ad7606 dt-bindings Sven Van Asbroeck (1): iio: proximity: as3935: fix use-after-free on device remove Tomasz Duszynski (3): iio: chemical: pms7003: extend supported sensors list dt-bindings: iio: chemical: pms7003: extend supported sensors list iio: chemical: sps30: fix attribute kernel version Vladimir Petrigo (1): iio: adc: ad7780: Add parentheses to macros Wei Yongjun (1): iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe() .mailmap | 1 + .../sysfs-bus-iio-impedance-analyzer-ad5933 | 19 +- Documentation/ABI/testing/sysfs-bus-iio-sps30 | 2 +- .../ABI/testing/sysfs-bus-iio-temperature-max31856 | 24 + .../bindings/iio/accel/kionix,kxcjk1013.txt | 17 + .../devicetree/bindings/iio/adc/adi,ad7780.txt | 48 ++ .../bindings/iio/adc/amlogic,meson-saradc.txt | 1 + .../devicetree/bindings/iio/adc/lpc32xx-adc.txt | 5 + .../bindings/iio/chemical/plantower,pms7003.txt | 8 +- .../bindings/iio/counter/stm32-lptimer-cnt.txt | 8 +- .../devicetree/bindings/iio/gyroscope/bmg160.txt | 20 + .../devicetree/bindings/iio/imu/adi,adis16480.txt | 85 +++ .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 + .../devicetree/bindings/iio/light/vcnl4000.txt | 24 + .../bindings/iio/proximity/devantech-srf04.txt | 28 - .../bindings/iio/proximity/devantech-srf04.yaml | 59 ++ .../bindings/iio/proximity/maxbotix,mb1232.txt | 29 + .../bindings/iio/temperature/max31856.txt | 24 + .../iio/temperature/temperature-bindings.txt | 7 + .../devicetree/bindings/vendor-prefixes.txt | 2 + MAINTAINERS | 10 +- drivers/iio/Kconfig | 24 +- drivers/iio/accel/Kconfig | 48 +- drivers/iio/accel/bma180.c | 18 +- drivers/iio/accel/bmc150-accel-core.c | 21 + drivers/iio/accel/cros_ec_accel_legacy.c | 40 +- drivers/iio/accel/kxcjk-1013.c | 10 + drivers/iio/accel/kxsd9.c | 4 +- drivers/iio/accel/mma8452.c | 2 +- drivers/iio/accel/st_accel_core.c | 2 +- drivers/iio/adc/Kconfig | 32 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7124.c | 2 +- drivers/{staging => }/iio/adc/ad7780.c | 179 ++++-- drivers/iio/adc/ad7923.c | 24 +- drivers/iio/adc/ad_sigma_delta.c | 16 +- drivers/iio/adc/ingenic-adc.c | 4 +- drivers/iio/adc/lpc32xx_adc.c | 60 +- drivers/iio/adc/meson_saradc.c | 8 + drivers/iio/adc/mxs-lradc-adc.c | 2 + drivers/iio/adc/stm32-dfsdm-adc.c | 628 ++++++++++++++++----- drivers/iio/adc/stm32-dfsdm-core.c | 180 +++++- drivers/iio/adc/stmpe-adc.c | 5 +- drivers/iio/adc/ti-ads7950.c | 219 ++++++- drivers/iio/adc/ti-ads8688.c | 2 +- drivers/iio/buffer/industrialio-buffer-cb.c | 10 +- drivers/iio/chemical/Kconfig | 12 +- drivers/iio/chemical/pms7003.c | 5 + .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 12 +- .../common/cros_ec_sensors/cros_ec_sensors_core.c | 22 +- drivers/iio/common/ms_sensors/Kconfig | 2 +- drivers/iio/common/ssp_sensors/ssp_iio.c | 2 +- drivers/iio/counter/stm32-lptimer-cnt.c | 55 ++ drivers/iio/dac/ad5064.c | 15 +- drivers/iio/dac/ti-dac5571.c | 2 +- drivers/iio/frequency/ad9523.c | 16 +- drivers/iio/gyro/bmg160_core.c | 21 + drivers/iio/gyro/bmg160_i2c.c | 9 + drivers/iio/gyro/itg3200_core.c | 20 + drivers/iio/gyro/mpu3050-core.c | 3 +- drivers/iio/humidity/Kconfig | 20 +- drivers/iio/imu/Makefile | 2 - drivers/iio/imu/{adis16400_core.c => adis16400.c} | 232 +++++++- drivers/iio/imu/adis16400.h | 215 ------- drivers/iio/imu/adis16400_buffer.c | 101 ---- drivers/iio/imu/adis16480.c | 435 +++++++++++++- drivers/iio/imu/adis_buffer.c | 40 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 10 +- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 + drivers/iio/industrialio-buffer.c | 24 +- drivers/iio/industrialio-core.c | 46 +- drivers/iio/industrialio-trigger.c | 5 +- drivers/iio/light/Kconfig | 274 ++++----- drivers/iio/light/cros_ec_light_prox.c | 12 +- drivers/iio/light/vcnl4000.c | 77 ++- drivers/iio/magnetometer/ak8974.c | 5 +- drivers/iio/magnetometer/ak8975.c | 13 +- drivers/iio/magnetometer/bmc150_magn.c | 21 + drivers/iio/magnetometer/hmc5843.h | 1 + drivers/iio/magnetometer/hmc5843_core.c | 20 +- drivers/iio/magnetometer/hmc5843_i2c.c | 7 +- drivers/iio/magnetometer/hmc5843_spi.c | 7 +- drivers/iio/potentiometer/Kconfig | 34 +- drivers/iio/potentiostat/lmp91000.c | 14 +- drivers/iio/pressure/bmp280-core.c | 6 + drivers/iio/pressure/cros_ec_baro.c | 11 +- drivers/iio/proximity/Kconfig | 12 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/as3935.c | 50 +- drivers/iio/proximity/mb1232.c | 272 +++++++++ drivers/iio/temperature/Kconfig | 24 +- drivers/iio/temperature/Makefile | 1 + drivers/iio/temperature/max31856.c | 353 ++++++++++++ drivers/iio/trigger/iio-trig-loop.c | 2 +- drivers/staging/iio/adc/Kconfig | 13 - drivers/staging/iio/adc/Makefile | 1 - drivers/staging/iio/adc/ad7192.c | 233 +++++--- drivers/staging/iio/adc/ad7192.h | 9 - drivers/staging/iio/adc/ad7280a.c | 109 ++-- drivers/staging/iio/impedance-analyzer/Kconfig | 2 +- drivers/staging/iio/impedance-analyzer/ad5933.c | 54 +- include/dt-bindings/iio/temperature/thermocouple.h | 16 + include/linux/iio/adc/ad_sigma_delta.h | 1 + include/linux/iio/driver.h | 1 + include/linux/iio/frequency/ad9523.h | 8 +- include/linux/iio/gyro/itg3200.h | 1 + include/linux/iio/iio.h | 4 +- include/linux/iio/imu/adis.h | 14 + 113 files changed, 3777 insertions(+), 1272 deletions(-) rename {drivers/staging/iio/Documentation => Documentation/ABI/testing}/sysfs-bus-iio-impedance-analyzer-ad5933 (56%) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt create mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt rename drivers/{staging => }/iio/adc/ad7780.c (63%) rename drivers/iio/imu/{adis16400_core.c => adis16400.c} (77%) delete mode 100644 drivers/iio/imu/adis16400.h delete mode 100644 drivers/iio/imu/adis16400_buffer.c create mode 100644 drivers/iio/proximity/mb1232.c create mode 100644 drivers/iio/temperature/max31856.c create mode 100644 include/dt-bindings/iio/temperature/thermocouple.h