@@ -1108,6 +1108,7 @@ struct ec_response_get_features {
/* Get flash info */
#define EC_CMD_FLASH_INFO 0x0010
+#define EC_VER_FLASH_INFO 2
/**
* struct ec_response_flash_info - Response to the flash info command.
@@ -1134,6 +1135,15 @@ struct ec_response_flash_info {
*/
#define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
+/*
+ * Flash must be selected for read/write/erase operations to succeed. This may
+ * be necessary on a chip where write/erase can be corrupted by other board
+ * activity, or where the chip needs to enable some sort of programming voltage,
+ * or where the read/write/erase operations require cleanly suspending other
+ * chip functionality.
+ */
+#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1)
+
/**
* struct ec_response_flash_info_1 - Response to the flash info v1 command.
* @flash_size: Usable flash size in bytes.
@@ -1156,6 +1166,12 @@ struct ec_response_flash_info {
* gcc anonymous structs don't seem to get along with the __packed directive;
* if they did we'd define the version 0 structure as a sub-structure of this
* one.
+ *
+ * Version 2 supports flash banks of different sizes:
+ * The caller specified the number of banks it has preallocated
+ * (num_banks_desc)
+ * The EC returns the number of banks describing the flash memory.
+ * It adds banks descriptions up to num_banks_desc.
*/
struct ec_response_flash_info_1 {
/* Version 0 fields; see above for description */
@@ -1169,6 +1185,42 @@ struct ec_response_flash_info_1 {
uint32_t flags;
} __ec_align4;
+struct ec_params_flash_info_2 {
+ /* Number of banks to describe */
+ uint16_t num_banks_desc;
+ /* Reserved; set 0; ignore on read */
+ uint8_t reserved[2];
+} __ec_align4;
+
+struct ec_flash_bank {
+ /* Number of sector is in this bank. */
+ uint16_t count;
+ /* Size in power of 2 of each sector (8 --> 256 bytes) */
+ uint8_t size_exp;
+ /* Minimal write size for the sectors in this bank */
+ uint8_t write_size_exp;
+ /* Erase size for the sectors in this bank */
+ uint8_t erase_size_exp;
+ /* Size for write protection, usually identical to erase size. */
+ uint8_t protect_size_exp;
+ /* Reserved; set 0; ignore on read */
+ uint8_t reserved[2];
+};
+
+struct ec_response_flash_info_2 {
+ /* Total flash in the EC. */
+ uint32_t flash_size;
+ /* Flags; see EC_FLASH_INFO_* */
+ uint32_t flags;
+ /* Maximum size to use to send data to write to the EC. */
+ uint32_t write_ideal_size;
+ /* Number of banks present in the EC. */
+ uint16_t num_banks_total;
+ /* Number of banks described in banks array. */
+ uint16_t num_banks_desc;
+ struct ec_flash_bank banks[0];
+} __ec_align4;
+
/*
* Read flash
*
@@ -1208,7 +1260,7 @@ struct ec_params_flash_write {
#define EC_CMD_FLASH_ERASE 0x0013
/**
- * struct ec_params_flash_erase - Parameters for the flash erase command.
+ * struct ec_params_flash_erase - Parameters for the flash erase command, v0.
* @offset: Byte offset to erase.
* @size: Size to erase in bytes.
*/
@@ -1217,6 +1269,43 @@ struct ec_params_flash_erase {
uint32_t size;
} __ec_align4;
+/*
+ * v1 add async erase:
+ * subcommands can returns:
+ * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below).
+ * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary.
+ * EC_RES_ERROR : other errors.
+ * EC_RES_BUSY : an existing erase operation is in progress.
+ * EC_RES_ACCESS_DENIED: Trying to erase running image.
+ *
+ * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just
+ * properly queued. The user must call ERASE_GET_RESULT subcommand to get
+ * the proper result.
+ * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send
+ * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC.
+ * ERASE_GET_RESULT command may timeout on EC where flash access is not
+ * permitted while erasing. (For instance, STM32F4).
+ */
+enum ec_flash_erase_cmd {
+ FLASH_ERASE_SECTOR, /* Erase and wait for result */
+ FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */
+ FLASH_ERASE_GET_RESULT, /* Ask for last erase result */
+};
+
+/**
+ * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1.
+ * @cmd: One of ec_flash_erase_cmd.
+ * @reserved: Pad byte; currently always contains 0.
+ * @flag: No flags defined yet; set to 0.
+ * @params: Same as v0 parameters.
+ */
+struct ec_params_flash_erase_v1 {
+ uint8_t cmd;
+ uint8_t reserved;
+ uint16_t flag;
+ struct ec_params_flash_erase params;
+} __ec_align4;
+
/*
* Get/set flash protection.
*
@@ -1252,6 +1341,15 @@ struct ec_params_flash_erase {
#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
/* Entire flash code protected when the EC boots */
#define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6)
+/* RW flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RW_AT_BOOT BIT(7)
+/* RW flash code protected now. */
+#define EC_FLASH_PROTECT_RW_NOW BIT(8)
+/* Rollback information flash region protected when the EC boots */
+#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT BIT(9)
+/* Rollback information flash region protected now */
+#define EC_FLASH_PROTECT_ROLLBACK_NOW BIT(10)
+
/**
* struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1290,16 +1388,31 @@ struct ec_response_flash_protect {
enum ec_flash_region {
/* Region which holds read-only EC image */
EC_FLASH_REGION_RO = 0,
- /* Region which holds rewritable EC image */
- EC_FLASH_REGION_RW,
+ /*
+ * Region which holds active RW image. 'Active' is different from
+ * 'running'. Active means 'scheduled-to-run'. Since RO image always
+ * scheduled to run, active/non-active applies only to RW images (for
+ * the same reason 'update' applies only to RW images. It's a state of
+ * an image on a flash. Running image can be RO, RW_A, RW_B but active
+ * image can only be RW_A or RW_B. In recovery mode, an active RW image
+ * doesn't enter 'running' state but it's still active on a flash.
+ */
+ EC_FLASH_REGION_ACTIVE,
/*
* Region which should be write-protected in the factory (a superset of
* EC_FLASH_REGION_RO)
*/
EC_FLASH_REGION_WP_RO,
+ /* Region which holds updatable (non-active) RW image */
+ EC_FLASH_REGION_UPDATE,
/* Number of regions */
EC_FLASH_REGION_COUNT,
};
+/*
+ * 'RW' is vague if there are multiple RW images; we mean the active one,
+ * so the old constant is deprecated.
+ */
+#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE
/**
* struct ec_params_flash_region_info - Parameters for the flash region info
@@ -1334,6 +1447,37 @@ struct ec_response_vbnvcontext {
uint8_t block[EC_VBNV_BLOCK_SIZE];
} __ec_align4;
+
+/* Get SPI flash information */
+#define EC_CMD_FLASH_SPI_INFO 0x0018
+
+struct ec_response_flash_spi_info {
+ /* JEDEC info from command 0x9F (manufacturer, memory type, size) */
+ uint8_t jedec[3];
+
+ /* Pad byte; currently always contains 0 */
+ uint8_t reserved0;
+
+ /* Manufacturer / device ID from command 0x90 */
+ uint8_t mfr_dev_id[2];
+
+ /* Status registers from command 0x05 and 0x35 */
+ uint8_t sr1, sr2;
+} __ec_align1;
+
+
+/* Select flash during flash operations */
+#define EC_CMD_FLASH_SELECT 0x0019
+
+/**
+ * struct ec_params_flash_select - Parameters for the flash select command.
+ * @select: 1 to select flash, 0 to deselect flash
+ */
+struct ec_params_flash_select {
+ uint8_t select;
+} __ec_align4;
+
+
/*****************************************************************************/
/* PWM commands */