@@ -2945,9 +2945,28 @@ enum ec_temp_thresholds {
/*
* Thermal configuration for one temperature sensor. Temps are in degrees K.
* Zero values will be silently ignored by the thermal task.
+ *
+ * Set 'temp_host' value allows thermal task to trigger some event with 1 degree
+ * hysteresis.
+ * For example,
+ * temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ * temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 299 K.
+ *
+ * Set 'temp_host_release' value allows thermal task has a custom hysteresis.
+ * For example,
+ * temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ * temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 294 K.
+ *
+ * Note that this structure is a sub-structure of
+ * ec_params_thermal_set_threshold_v1, but maintains its alignment there.
*/
struct ec_thermal_config {
uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+ uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */
uint32_t temp_fan_off; /* no active cooling needed */
uint32_t temp_fan_max; /* max active cooling needed */
} __ec_align4;
@@ -2973,32 +2992,63 @@ struct ec_params_thermal_set_threshold_v1 {
/* Toggle automatic fan control */
#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
-/* Get TMP006 calibration data */
+/* Version 1 of input params */
+struct ec_params_auto_fan_ctrl_v1 {
+ uint8_t fan_idx;
+} __ec_align1;
+
+/* Get/Set TMP006 calibration data */
#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
+
+/*
+ * The original TMP006 calibration only needed four params, but now we need
+ * more. Since the algorithm is nothing but magic numbers anyway, we'll leave
+ * the params opaque. The v1 "get" response will include the algorithm number
+ * and how many params it requires. That way we can change the EC code without
+ * needing to update this file. We can also use a different algorithm on each
+ * sensor.
+ */
+/* This is the same struct for both v0 and v1. */
struct ec_params_tmp006_get_calibration {
uint8_t index;
} __ec_align1;
-struct ec_response_tmp006_get_calibration {
+/* Version 0 */
+struct ec_response_tmp006_get_calibration_v0 {
float s0;
float b0;
float b1;
float b2;
} __ec_align4;
-/* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
-
-struct ec_params_tmp006_set_calibration {
+struct ec_params_tmp006_set_calibration_v0 {
uint8_t index;
- uint8_t reserved[3]; /* Reserved; set 0 */
+ uint8_t reserved[3];
float s0;
float b0;
float b1;
float b2;
} __ec_align4;
+/* Version 1 */
+struct ec_response_tmp006_get_calibration_v1 {
+ uint8_t algorithm;
+ uint8_t num_params;
+ uint8_t reserved[2];
+ float val[0];
+} __ec_align4;
+
+struct ec_params_tmp006_set_calibration_v1 {
+ uint8_t index;
+ uint8_t algorithm;
+ uint8_t num_params;
+ uint8_t reserved;
+ float val[0];
+} __ec_align4;
+
+
/* Read raw TMP006 data */
#define EC_CMD_TMP006_GET_RAW 0x0055