mbox series

[PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle.

Message ID 20190812210428.1668b6d8@archlinux (mailing list archive)
State New, archived
Headers show
Series [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle. | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a

Message

Jonathan Cameron Aug. 12, 2019, 8:04 p.m. UTC
The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9:

  staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a

for you to fetch changes up to ef19ee60f9cf713518c1d5e15946466d51e9f00b:

  iio: hi8435: Drop hi8435_remove() by using devres for remaining elements (2019-08-11 09:59:38 +0100)

----------------------------------------------------------------
First set of new device support, features and cleanups for IIO in the 5.4 cycle

Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices.  Done from immutable branch.

A counter subsystem patche in here as well.

Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.

New device support
* adis16460
  - New driver based on ADIS framework which needed addition of support
    for cs_change_delay. Includes device tree binding.
* cros_ec
  - Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
  - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
  - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
  - New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
  - New driver for this ON Semiconductor Ambient light sensor.

Features and cleanups
* tree wide
  - Drop error prints after platform_get_irq as already prints errors
    internally if any occur.
* docs
  - Document mounting matrix.
  - Fix a missing newline at end of file.
* ad2s1210
  - Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
  - Add of_device_id array to explicity handling DT bindings.
* ad7606
  - Lots of rework leading to support for software configure modes in ad7616
    parts.
  - Debugfs register access support.
* am2315
  - Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
  - Typo in module description.
* cm36651
  - Convert to i2c_new_dummy_device.
  - Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
  - Calibscale support for accel, gyro and magnetometer.
  - Tidy up some error codes to return the error from the stack rather than
    -EIO.
  - Determine protocol version.
  - Add a sign vector to the core to fix sensor rotation if necessary.
    Cannot just be done with mount matrix as already in use in many devices.
  - Tidy up INFO_SCALE being in both the separate and shared lists.
  - Drop a lot of dplicate code from the cros-ec-accel-legacy driver
    and use the core provided code instead.
  - Make frequency range available to userspace.
* counter / ftm-quaddec
  - Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
  - Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
  - Use gpiod_set_value_cansleep as we don't care here and there is a
    board out there where it needs to sleep.
  - Switch to device managed APIs for all of probe and drop explict remove.
* hp03
  - Convert to i2c_new_dummy_device.
* maxim thermocouple
  - Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
  - Fix typo in constant naming.
* mpu6050
  - Use devm_add_action_or_reset in place of explicit error handling.
  - Make text in Kconfig more explicit about which parts are supported.
* mxc4005
  - Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
  - Convert device tree bindings to yaml.
  - Add a MAINTAINERS entry
* sc27xx
  - Introduce a local struct device *dev pointer to avoid lots of deref.
  - Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
  - Typo fix in naming.
* si1145
  - Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
  - Lots of rework to enable switch to regmap.
  - Regmap conversion at the end.
  - Tidy up some inconsistencies in buffer setup ops.
  - Tidy up an oddity by dropping get_irq_data_ready function in favour
    of direct access.
  - Stop allocating buffer in buffer enable in favour of just embedding
    a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
  - l3c device support (LSM6DSO and LSM6DSR)
  - tidy up irq return logic which was strangely written.
  - fix up an ABI quirk where this driver used separate scale
    attributes, even though they were always shared by type.
* stk33xx
  - Device tree bindings include manufacturer ID.
* stm32-adc
  - Add control for supply to analog switches including DT bindings.
* stm32 timer
  - Drop the quadrature mode support.  Believed there were no users so
    take this opportunity to drop this unwanted ABI.
* tsl2772
  - Switch to device mangage APIs for all of probe and drop explicit remove.
  - Use regulator_bulk_* APIs to reduce repitition.
* veml6070
  - Convert to i2c_new_dummy_device.

----------------------------------------------------------------
Alexandru Ardelean (3):
      iio: imu: adis: Add support for SPI transfer cs_change_delay
      iio: imu: Add support for the ADIS16460 IMU
      dt-bindings: iio: imu: add bindings for ADIS16460

Andrey Smirnov (2):
      iio: hi8435: Use gpiod_set_value_cansleep()
      iio: hi8435: Drop hi8435_remove() by using devres for remaining elements

Beniamin Bia (5):
      iio: adc: ad7606: Move common channel definition to header
      iio: adc: ad7606: Move spi dependent features to spi file
      iio: adc: ad7606: Allow reconfigration after reset
      iio: adc: ad7606: Add support for software mode for ad7616
      iio: adc: ad7606: Add debug mode for ad7616

Benjamin Gaignard (1):
      IIO: stm32: Remove quadrature related functions from trigger driver

Bárbara Fernandes (1):
      staging: iio: ad7192: create of_device_id array

Christophe JAILLET (3):
      iio: sca3000: Fix a typo
      iio: light: apds9960: Fix a typo
      iio: magnetometer: mmc35240: Fix a typo in the name of a constant

Chuhong Yuan (11):
      iio: maxim_thermocouple: Use device-managed APIs
      staging: iio: ad2s1210: Use device-managed API
      iio: humidity: Use device-managed APIs
      iio: mxc4005: Use device-managed APIs
      counter/ftm-quaddec: Use device-managed registration API
      iio: light: cm3323: Use device-managed APIs
      iio: light: si1145: Use device-managed APIs
      iio: tsl2772: Use devm_add_action_or_reset
      iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
      iio: tsl2772: Use devm_iio_device_register
      iio: tsl2772: Use regulator_bulk_() APIs

Denis Ciocca (17):
      iio:common:st_sensors: add st_sensors_get_settings_index() helper function
      iio:accel: introduce st_accel_get_settings() function
      iio:gyro: introduce st_gyro_get_settings() function
      iio:magn: introduce st_magn_get_settings() function
      iio:pressure: introduce st_press_get_settings() function
      iio:accel: device settings are set immediately during probe
      iio:gyro: device settings are set immediately during probe
      iio:magn: device settings are set immediately during probe
      iio:pressure: device settings are set immediately during probe
      iio: move 3-wire spi initialization to st_sensors_spi
      iio: make st_sensors drivers use regmap
      iio:accel: preenable/postenable/predisable fixup for ST accel buffer
      iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
      iio:magn: preenable/postenable/predisable fixup for ST magn buffer
      iio:pressure: preenable/postenable/predisable fixup for ST press buffer
      iio: remove get_irq_data_ready() function pointer and use IRQ number directly
      iio:st_sensors: remove buffer allocation at each buffer enable

Fabien Lahoudere (2):
      iio: common: cros_ec_sensors: determine protocol version
      iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs

Fabrice Gasnier (2):
      dt-bindings: iio: adc: stm32: add analog switches supply control
      iio: adc: stm32-adc: add analog switches supply control

Fuqian Huang (3):
      iio: adc: sc27xx: Introduce local variable 'struct device *dev'
      iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
      iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()

Geert Uytterhoeven (1):
      Documentation: ABI: iio: Add missing newline at end of file

Gwendal Grignou (6):
      iio: cros_ec: Add calibscale for 3d MEMS
      iio: cros_ec: Remove replacing error code with -EIO
      iio: cros_ec: Add sign vector in core for backward compatibility
      iio: cros_ec_accel_legacy: Fix incorrect channel setting
      iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
      iio: cros_ec_accel_legacy: Add support for veyron-minnie

Jean-Baptiste Maneyrol (1):
      iio: imu: inv_mpu6050: be more explicit on supported chips

Jonathan Cameron (1):
      Merge tag 'tags/i3c/export-i3c_device_match_id' into HEAD

Linus Walleij (1):
      iio: document bindings for mounting matrices

Lorenzo Bianconi (8):
      iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C
      dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings
      iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
      iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
      iio: imu: st_lsm6dsx: inline output acc/gyro output regs
      iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
      iio: imu: st_lsm6dsx: add support to ISM330DHCX
      dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings

Luca Weiss (3):
      dt-bindings: Add vendor prefix for sensortek
      dt-bindings: iio: light: add stk33xx
      iio: light: stk3310: Add device tree support

Martin Kaiser (2):
      iio: potentiometer: add a driver for Maxim 5432-5435
      dt-bindings: iio: potentiometer: add max5432.yaml binding

Martin Kepplinger (1):
      iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type

Martyn Welch (2):
      dt-bindings: Add binding document for NOA1305
      iio: light: noa1305: Add support for NOA1305

Sean Nyekjaer (1):
      iio: imu: st_lsm6dsx: flip irq return logic

Stephen Boyd (1):
      iio: Remove dev_err() usage after platform_get_irq()

Tomasz Duszynski (2):
      dt-bindings: iio: chemical: pms7003: convert bindings to yaml
      MAINTAINERS: add entry for plantower pms7003 driver

Vitor Soares (2):
      i3c: move i3c_device_match_id to device.c and export it
      iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

Wolfram Sang (3):
      iio: light: cm36651: convert to i2c_new_dummy_device
      iio: light: veml6070: convert to i2c_new_dummy_device
      iio: pressure: hp03: convert to i2c_new_dummy_device

 .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32      |   2 +-
 .../ABI/testing/sysfs-bus-iio-timer-stm32          |  23 -
 .../devicetree/bindings/iio/adc/st,stm32-adc.txt   |   6 +
 .../bindings/iio/chemical/plantower,pms7003.txt    |  26 --
 .../bindings/iio/chemical/plantower,pms7003.yaml   |  51 +++
 .../devicetree/bindings/iio/imu/adi,adis16460.yaml |  53 +++
 .../devicetree/bindings/iio/imu/st_lsm6dsx.txt     |   2 +
 .../devicetree/bindings/iio/light/noa1305.yaml     |  44 ++
 .../devicetree/bindings/iio/light/stk33xx.yaml     |  49 +++
 .../devicetree/bindings/iio/mount-matrix.txt       | 203 +++++++++
 .../bindings/iio/potentiometer/max5432.yaml        |  44 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 MAINTAINERS                                        |  14 +
 drivers/counter/ftm-quaddec.c                      |  30 +-
 drivers/i3c/device.c                               |  53 +++
 drivers/i3c/master.c                               |  45 --
 drivers/iio/accel/Kconfig                          |   4 +-
 drivers/iio/accel/cros_ec_accel_legacy.c           | 353 ++++-----------
 drivers/iio/accel/mxc4005.c                        |  40 +-
 drivers/iio/accel/sca3000.c                        |   2 +-
 drivers/iio/accel/st_accel.h                       |   1 +
 drivers/iio/accel/st_accel_buffer.c                |  44 +-
 drivers/iio/accel/st_accel_core.c                  |  32 +-
 drivers/iio/accel/st_accel_i2c.c                   |  23 +-
 drivers/iio/accel/st_accel_spi.c                   |  20 +-
 drivers/iio/adc/ad7606.c                           |  91 ++--
 drivers/iio/adc/ad7606.h                           |  57 ++-
 drivers/iio/adc/ad7606_par.c                       |   4 +-
 drivers/iio/adc/ad7606_spi.c                       | 175 +++++++-
 drivers/iio/adc/at91_adc.c                         |   4 +-
 drivers/iio/adc/axp288_adc.c                       |   4 +-
 drivers/iio/adc/bcm_iproc_adc.c                    |   7 +-
 drivers/iio/adc/da9150-gpadc.c                     |   4 +-
 drivers/iio/adc/envelope-detector.c                |   5 +-
 drivers/iio/adc/exynos_adc.c                       |   4 +-
 drivers/iio/adc/fsl-imx25-gcq.c                    |   1 -
 drivers/iio/adc/hi8435.c                           |  34 +-
 drivers/iio/adc/imx7d_adc.c                        |   4 +-
 drivers/iio/adc/lpc32xx_adc.c                      |   4 +-
 drivers/iio/adc/npcm_adc.c                         |   1 -
 drivers/iio/adc/rockchip_saradc.c                  |   4 +-
 drivers/iio/adc/sc27xx_adc.c                       |  45 +-
 drivers/iio/adc/spear_adc.c                        |   1 -
 drivers/iio/adc/stm32-adc-core.c                   | 194 +++++++-
 drivers/iio/adc/stm32-adc.c                        |   4 +-
 drivers/iio/adc/stm32-dfsdm-adc.c                  |   5 +-
 drivers/iio/adc/sun4i-gpadc-iio.c                  |   4 +-
 drivers/iio/adc/twl6030-gpadc.c                    |   4 +-
 drivers/iio/adc/vf610_adc.c                        |   4 +-
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |  54 ++-
 .../common/cros_ec_sensors/cros_ec_sensors_core.c  | 150 ++++++-
 drivers/iio/common/st_sensors/st_sensors_buffer.c  |  10 +-
 drivers/iio/common/st_sensors/st_sensors_core.c    | 118 ++---
 drivers/iio/common/st_sensors/st_sensors_i2c.c     |  82 ++--
 drivers/iio/common/st_sensors/st_sensors_spi.c     | 148 +++----
 drivers/iio/common/st_sensors/st_sensors_trigger.c |  31 +-
 drivers/iio/gyro/st_gyro.h                         |   1 +
 drivers/iio/gyro/st_gyro_buffer.c                  |  48 +-
 drivers/iio/gyro/st_gyro_core.c                    |  32 +-
 drivers/iio/gyro/st_gyro_i2c.c                     |  22 +-
 drivers/iio/gyro/st_gyro_spi.c                     |  20 +-
 drivers/iio/humidity/am2315.c                      |  24 +-
 drivers/iio/humidity/hdc100x.c                     |  19 +-
 drivers/iio/imu/Kconfig                            |  12 +
 drivers/iio/imu/Makefile                           |   1 +
 drivers/iio/imu/adis.c                             |  12 +
 drivers/iio/imu/adis16460.c                        | 489 +++++++++++++++++++++
 drivers/iio/imu/inv_mpu6050/Kconfig                |  10 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |   3 +-
 drivers/iio/imu/st_lsm6dsx/Kconfig                 |  11 +-
 drivers/iio/imu/st_lsm6dsx/Makefile                |   1 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h            |  17 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c     |  17 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       | 483 ++++++++++++++++----
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c        |  10 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c        |  57 +++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c        |  10 +
 drivers/iio/light/Kconfig                          |  11 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/apds9960.c                       |   2 +-
 drivers/iio/light/cm3323.c                         |  33 +-
 drivers/iio/light/cm36651.c                        |  12 +-
 drivers/iio/light/cros_ec_light_prox.c             |  51 ++-
 drivers/iio/light/noa1305.c                        | 312 +++++++++++++
 drivers/iio/light/si1145.c                         |  42 +-
 drivers/iio/light/stk3310.c                        |   9 +
 drivers/iio/light/tsl2772.c                        | 124 ++----
 drivers/iio/light/veml6070.c                       |   6 +-
 drivers/iio/magnetometer/mmc35240.c                |   4 +-
 drivers/iio/magnetometer/st_magn.h                 |   1 +
 drivers/iio/magnetometer/st_magn_buffer.c          |  31 +-
 drivers/iio/magnetometer/st_magn_core.c            |  32 +-
 drivers/iio/magnetometer/st_magn_i2c.c             |  22 +-
 drivers/iio/magnetometer/st_magn_spi.c             |  20 +-
 drivers/iio/potentiometer/Kconfig                  |  11 +
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/max5432.c                | 135 ++++++
 drivers/iio/pressure/cros_ec_baro.c                |  19 +-
 drivers/iio/pressure/hp03.c                        |   6 +-
 drivers/iio/pressure/st_pressure.h                 |   1 +
 drivers/iio/pressure/st_pressure_buffer.c          |  39 +-
 drivers/iio/pressure/st_pressure_core.c            |  32 +-
 drivers/iio/pressure/st_pressure_i2c.c             |  31 +-
 drivers/iio/pressure/st_pressure_spi.c             |  22 +-
 drivers/iio/temperature/maxim_thermocouple.c       |  25 +-
 drivers/iio/trigger/stm32-timer-trigger.c          |  84 ----
 drivers/staging/iio/adc/ad7192.c                   |  12 +
 drivers/staging/iio/resolver/ad2s1210.c            |  12 +-
 include/linux/i3c/device.h                         |   4 +
 include/linux/iio/common/cros_ec_sensors_core.h    |  28 +-
 include/linux/iio/common/st_sensors.h              |  66 +--
 include/linux/iio/common/st_sensors_i2c.h          |   4 +-
 include/linux/iio/common/st_sensors_spi.h          |   4 +-
 include/linux/iio/imu/adis.h                       |   2 +
 114 files changed, 3455 insertions(+), 1518 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/light/noa1305.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/light/stk33xx.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/mount-matrix.txt
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
 create mode 100644 drivers/iio/imu/adis16460.c
 create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
 create mode 100644 drivers/iio/light/noa1305.c
 create mode 100644 drivers/iio/potentiometer/max5432.c

Comments

Greg KH Aug. 12, 2019, 8:59 p.m. UTC | #1
On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote:
> The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9:
> 
>   staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a

Pulled and pushed out, thanks.

greg k-h
Greg KH Aug. 13, 2019, 8:14 a.m. UTC | #2
On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote:
> On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote:
> > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9:
> > 
> >   staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200)
> > 
> > are available in the Git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a
> 
> Pulled and pushed out, thanks.

0-day gives me the following warning, did you not see this on your tree?

Can you send me a patch to fix this up?

thanks,

greg k-h

----------------
tree/branch: https://kernel.googlesource.com/pub/scm/linux/kernel/git/gregkh/staging.git  staging-testing
branch HEAD: 6aed51d8912460cab375f7fc4ea834851e107b7a  Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Regressions in current branch:

drivers/iio/light/noa1305.c:87:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
Jonathan Cameron Aug. 13, 2019, 1:34 p.m. UTC | #3
On Tue, 13 Aug 2019 10:14:19 +0200
Greg KH <gregkh@linuxfoundation.org> wrote:

> On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote:
> > On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote:  
> > > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9:
> > > 
> > >   staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200)
> > > 
> > > are available in the Git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a  
> > 
> > Pulled and pushed out, thanks.  
> 
> 0-day gives me the following warning, did you not see this on your tree?

Looks like my tree was based before the change that enabled the warning
by default (I didn't check but a quick build shows it doesn't occur with
iio.git/togreg and does with staging/staging-testing

I can't actually find any completion message from 0-day so not sure if this
hit an outage or if I'm not getting the completion messages for some reason.

Oops on missing this one in review!

> 
> Can you send me a patch to fix this up?

On it's way.

Jonathan

> 
> thanks,
> 
> greg k-h
> 
> ----------------
> tree/branch: https://kernel.googlesource.com/pub/scm/linux/kernel/git/gregkh/staging.git  staging-testing
> branch HEAD: 6aed51d8912460cab375f7fc4ea834851e107b7a  Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
> 
> Regressions in current branch:
> 
> drivers/iio/light/noa1305.c:87:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
> 
>
Greg KH Aug. 13, 2019, 1:56 p.m. UTC | #4
On Tue, Aug 13, 2019 at 02:34:21PM +0100, Jonathan Cameron wrote:
> On Tue, 13 Aug 2019 10:14:19 +0200
> Greg KH <gregkh@linuxfoundation.org> wrote:
> 
> > On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote:
> > > On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote:  
> > > > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9:
> > > > 
> > > >   staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200)
> > > > 
> > > > are available in the Git repository at:
> > > > 
> > > >   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a  
> > > 
> > > Pulled and pushed out, thanks.  
> > 
> > 0-day gives me the following warning, did you not see this on your tree?
> 
> Looks like my tree was based before the change that enabled the warning
> by default (I didn't check but a quick build shows it doesn't occur with
> iio.git/togreg and does with staging/staging-testing

That compiler isn't "on" yet in our trees, which is why we all missed it
locally.

> I can't actually find any completion message from 0-day so not sure if this
> hit an outage or if I'm not getting the completion messages for some reason.

0-day is being slow/flakey these days :(

> Oops on missing this one in review!

Not a problem, nice to see it's an actual bug :)

thanks,

greg k-h