diff mbox series

dt-bindings: Clean-up regulator '-supply' schemas

Message ID 20191011190231.9779-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: Clean-up regulator '-supply' schemas | expand

Commit Message

Rob Herring (Arm) Oct. 11, 2019, 7:02 p.m. UTC
Regulator '*-supply' properties are always a single phandle, so
'maxItems: 1' or a $ref is not necessary. All that's needed is either
'true' or an optional 'description'. Following this clean-up, the
meta-schema will enforce this pattern.

There's one case in tree with 'innolux,n156bge-l21' having 2 phandles.
This appears to be a mistake or abuse of simple-panel as it's 2 different
voltage rails connected to 'power-supply'.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml   | 2 --
 Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml  | 3 +--
 Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml  | 3 +--
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml   | 3 +--
 Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml    | 3 ---
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 5 +----
 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml    | 1 -
 .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml      | 4 +---
 .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml  | 1 -
 Documentation/devicetree/bindings/iio/pressure/bmp085.yaml   | 2 --
 .../devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml | 1 -
 .../devicetree/bindings/regulator/fixed-regulator.yaml       | 1 -
 13 files changed, 5 insertions(+), 25 deletions(-)

Comments

Jonathan Cameron Oct. 12, 2019, 9:44 a.m. UTC | #1
On Fri, 11 Oct 2019 14:02:31 -0500
Rob Herring <robh@kernel.org> wrote:

> Regulator '*-supply' properties are always a single phandle, so
> 'maxItems: 1' or a $ref is not necessary. All that's needed is either
> 'true' or an optional 'description'. Following this clean-up, the
> meta-schema will enforce this pattern.
> 
> There's one case in tree with 'innolux,n156bge-l21' having 2 phandles.
> This appears to be a mistake or abuse of simple-panel as it's 2 different
> voltage rails connected to 'power-supply'.

Nice to centralise bits of schema like this, though perhaps it does
make everything feel a bit unpredictable as not obvious to someone writing
a binding that a particular corner has been centralized but others haven't.

Oh well, I guess they should look at the relevant docs for each bit.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio

Thanks,

Jonathan

> 
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Kevin Hilman <khilman@baylibre.com>
> Cc: Jonathan Cameron <jic23@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: linux-iio@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml   | 2 --
>  Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml  | 3 +--
>  Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml  | 3 +--
>  Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml   | 3 +--
>  Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml    | 3 ---
>  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 5 +----
>  Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml    | 1 -
>  Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml    | 1 -
>  .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml      | 4 +---
>  .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml  | 1 -
>  Documentation/devicetree/bindings/iio/pressure/bmp085.yaml   | 2 --
>  .../devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml | 1 -
>  .../devicetree/bindings/regulator/fixed-regulator.yaml       | 1 -
>  13 files changed, 5 insertions(+), 25 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
> index fb747682006d..0da42ab8fd3a 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
> @@ -79,8 +79,6 @@ properties:
>  
>    hdmi-supply:
>      description: phandle to an external 5V regulator to power the HDMI logic
> -    allOf:
> -      - $ref: /schemas/types.yaml#/definitions/phandle
>  
>    port@0:
>      type: object
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index 5f1fd6d7ee0f..e50a0cc78fff 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -37,8 +37,7 @@ properties:
>    clocks:
>      maxItems: 1
>  
> -  mali-supply:
> -    maxItems: 1
> +  mali-supply: true
>  
>    operating-points-v2: true
>  
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 47bc1ac36426..5c576e5019c6 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -69,8 +69,7 @@ properties:
>        - const: core
>        - const: bus
>  
> -  mali-supply:
> -    maxItems: 1
> +  mali-supply: true
>  
>    resets:
>      minItems: 1
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> index c5d93c5839d3..afde81be3c29 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> @@ -97,8 +97,7 @@ properties:
>  
>    memory-region: true
>  
> -  mali-supply:
> -    maxItems: 1
> +  mali-supply: true
>  
>    power-domains:
>      maxItems: 1
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> index 9692b7f719f5..e932d5aed02f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> @@ -45,15 +45,12 @@ properties:
>  
>    refin1-supply:
>      description: refin1 supply can be used as reference for conversion.
> -    maxItems: 1
>  
>    refin2-supply:
>      description: refin2 supply can be used as reference for conversion.
> -    maxItems: 1
>  
>    avdd-supply:
>      description: avdd supply can be used as reference for conversion.
> -    maxItems: 1
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index cc544fdc38be..6eb33207a167 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -31,10 +31,7 @@ properties:
>  
>    spi-cpha: true
>  
> -  avcc-supply:
> -    description:
> -      Phandle to the Avcc power supply
> -    maxItems: 1
> +  avcc-supply: true
>  
>    interrupts:
>      maxItems: 1
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> index d1109416963c..9acde6d2e2d9 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> @@ -39,7 +39,6 @@ properties:
>    avdd-supply:
>      description:
>        The regulator supply for the ADC reference voltage.
> -    maxItems: 1
>  
>    powerdown-gpios:
>      description:
> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> index d76ece97c76c..91ab9c842273 100644
> --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> @@ -41,7 +41,6 @@ properties:
>    avdd-supply:
>      description:
>        Definition of the regulator used as analog supply
> -    maxItems: 1
>  
>    clock-frequency:
>      minimum: 20000
> diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> index b4c6c26681d9..9218b2efa62f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> @@ -46,9 +46,7 @@ properties:
>    "#io-channel-cells":
>      const: 1
>  
> -  vdd-supply:
> -    description: VDD input supply
> -    maxItems: 1
> +  vdd-supply: true
>  
>    samsung,syscon-phandle:
>      $ref: '/schemas/types.yaml#/definitions/phandle'
> diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> index a551d3101f93..19e53930ebf6 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> @@ -25,7 +25,6 @@ properties:
>  
>    vcc-supply:
>      description: regulator that provides power to the sensor
> -    maxItems: 1
>  
>    plantower,set-gpios:
>      description: GPIO connected to the SET line
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index c6721a7e8938..519137e5c170 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -28,12 +28,10 @@ properties:
>    vddd-supply:
>      description:
>        digital voltage regulator (see regulator/regulator.txt)
> -    maxItems: 1
>  
>    vdda-supply:
>      description:
>        analog voltage regulator (see regulator/regulator.txt)
> -    maxItems: 1
>  
>    reset-gpios:
>      description:
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> index 51254b4e65dd..57d8603076bd 100644
> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> @@ -36,7 +36,6 @@ properties:
>      const: 0
>  
>    phy-supply:
> -     maxItems: 1
>       description:
>         Phandle to a regulator that provides power to the PHY. This
>         regulator will be managed during the PHY power on/off sequence.
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> index a78150c47aa2..e56d97b233f4 100644
> --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> @@ -64,7 +64,6 @@ properties:
>  
>    vin-supply:
>      description: Input supply phandle.
> -    $ref: /schemas/types.yaml#/definitions/phandle
>  
>  required:
>    - compatible
Mark Brown Oct. 18, 2019, 7:50 p.m. UTC | #2
On Fri, Oct 11, 2019 at 02:02:31PM -0500, Rob Herring wrote:
> Regulator '*-supply' properties are always a single phandle, so
> 'maxItems: 1' or a $ref is not necessary. All that's needed is either
> 'true' or an optional 'description'. Following this clean-up, the
> meta-schema will enforce this pattern.

Acked-by: Mark Brown <broonie@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index fb747682006d..0da42ab8fd3a 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -79,8 +79,6 @@  properties:
 
   hdmi-supply:
     description: phandle to an external 5V regulator to power the HDMI logic
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
 
   port@0:
     type: object
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 5f1fd6d7ee0f..e50a0cc78fff 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -37,8 +37,7 @@  properties:
   clocks:
     maxItems: 1
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   operating-points-v2: true
 
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 47bc1ac36426..5c576e5019c6 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -69,8 +69,7 @@  properties:
       - const: core
       - const: bus
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   resets:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index c5d93c5839d3..afde81be3c29 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -97,8 +97,7 @@  properties:
 
   memory-region: true
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index 9692b7f719f5..e932d5aed02f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -45,15 +45,12 @@  properties:
 
   refin1-supply:
     description: refin1 supply can be used as reference for conversion.
-    maxItems: 1
 
   refin2-supply:
     description: refin2 supply can be used as reference for conversion.
-    maxItems: 1
 
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
-    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cc544fdc38be..6eb33207a167 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -31,10 +31,7 @@  properties:
 
   spi-cpha: true
 
-  avcc-supply:
-    description:
-      Phandle to the Avcc power supply
-    maxItems: 1
+  avcc-supply: true
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index d1109416963c..9acde6d2e2d9 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -39,7 +39,6 @@  properties:
   avdd-supply:
     description:
       The regulator supply for the ADC reference voltage.
-    maxItems: 1
 
   powerdown-gpios:
     description:
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index d76ece97c76c..91ab9c842273 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -41,7 +41,6 @@  properties:
   avdd-supply:
     description:
       Definition of the regulator used as analog supply
-    maxItems: 1
 
   clock-frequency:
     minimum: 20000
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index b4c6c26681d9..9218b2efa62f 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -46,9 +46,7 @@  properties:
   "#io-channel-cells":
     const: 1
 
-  vdd-supply:
-    description: VDD input supply
-    maxItems: 1
+  vdd-supply: true
 
   samsung,syscon-phandle:
     $ref: '/schemas/types.yaml#/definitions/phandle'
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index a551d3101f93..19e53930ebf6 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -25,7 +25,6 @@  properties:
 
   vcc-supply:
     description: regulator that provides power to the sensor
-    maxItems: 1
 
   plantower,set-gpios:
     description: GPIO connected to the SET line
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index c6721a7e8938..519137e5c170 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -28,12 +28,10 @@  properties:
   vddd-supply:
     description:
       digital voltage regulator (see regulator/regulator.txt)
-    maxItems: 1
 
   vdda-supply:
     description:
       analog voltage regulator (see regulator/regulator.txt)
-    maxItems: 1
 
   reset-gpios:
     description:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 51254b4e65dd..57d8603076bd 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -36,7 +36,6 @@  properties:
     const: 0
 
   phy-supply:
-     maxItems: 1
      description:
        Phandle to a regulator that provides power to the PHY. This
        regulator will be managed during the PHY power on/off sequence.
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index a78150c47aa2..e56d97b233f4 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -64,7 +64,6 @@  properties:
 
   vin-supply:
     description: Input supply phandle.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible