Message ID | 20191104174036.3535-1-marcus.folkesson@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml | expand |
On Mon, 2019-11-04 at 18:40 +0100, Marcus Folkesson wrote: > [External] > > Rewrite bindings to use json-schema vocabulary. Hey, Overall looks good. A few comments inline. Rob may add more. > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > --- > .../bindings/iio/dac/lltc,ltc1660.yaml | 54 +++++++++++++++++++ > .../devicetree/bindings/iio/dac/ltc1660.txt | 21 -------- > MAINTAINERS | 2 +- > 3 files changed, 55 insertions(+), 22 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > new file mode 100644 > index 000000000000..1f3136bfffcd > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > @@ -0,0 +1,54 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs > + > +maintainers: > + - Marcus Folkesson <marcus.folkesson@gmail.com> > + > +description: | > + Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit > DAC. > + Datasheet can be found here: > https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf > + > +properties: > + compatible: > + enum: > + - lltc,ltc1660 > + - lltc,ltc1665 > + > + reg: > + description: SPI chip select number for the device You can remove description. It's a standard property. > + maxItems: 1 > + > + spi-max-frequency: > + description: | > + Definition as per Documentation/devicetree/bindings/spi/spi- > bus.txt. > + maximum: 5000000 > + maxItems: 1 I think you can probably remove `spi-max-frequency` from here. It's documented in the base SPI schema. > + > + vref-supply: > + description: Phandle to the external reference voltage supply. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - vref-supply > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + dac@0 { > + compatible = "lltc,ltc1660"; > + reg = <0>; > + spi-max-frequency = <5000000>; > + vref-supply = <&vref_reg>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > deleted file mode 100644 > index c5b5f22d6c64..000000000000 > --- a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > +++ /dev/null > @@ -1,21 +0,0 @@ > -* Linear Technology Micropower octal 8-Bit and 10-Bit DACs > - > -Required properties: > - - compatible: Must be one of the following: > - "lltc,ltc1660" > - "lltc,ltc1665" > - - reg: SPI chip select number for the device > - - vref-supply: Phandle to the voltage reference supply > - > -Recommended properties: > - - spi-max-frequency: Definition as per > - Documentation/devicetree/bindings/spi/spi-bus.txt. > - Max frequency for this chip is 5 MHz. > - > -Example: > -dac@0 { > - compatible = "lltc,ltc1660"; > - reg = <0>; > - spi-max-frequency = <5000000>; > - vref-supply = <&vref_reg>; > -}; > diff --git a/MAINTAINERS b/MAINTAINERS > index fbccc9d450ff..23497d713298 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9619,7 +9619,7 @@ LTC1660 DAC DRIVER > M: Marcus Folkesson <marcus.folkesson@gmail.com> > L: linux-iio@vger.kernel.org > S: Maintained > -F: Documentation/devicetree/bindings/iio/dac/ltc1660.txt > +F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > F: drivers/iio/dac/ltc1660.c > > LTC4261 HARDWARE MONITOR DRIVER
Hi Alexandru, See comments below. On Tue, Nov 05, 2019 at 06:42:06AM +0000, Ardelean, Alexandru wrote: > On Mon, 2019-11-04 at 18:40 +0100, Marcus Folkesson wrote: > > [External] > > > > Rewrite bindings to use json-schema vocabulary. > > Hey, > > Overall looks good. > > A few comments inline. > Rob may add more. Thank you for looking into this! > > > > > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > --- > > .../bindings/iio/dac/lltc,ltc1660.yaml | 54 +++++++++++++++++++ > > .../devicetree/bindings/iio/dac/ltc1660.txt | 21 -------- > > MAINTAINERS | 2 +- > > 3 files changed, 55 insertions(+), 22 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > > delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > > > diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > > b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > > new file mode 100644 > > index 000000000000..1f3136bfffcd > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > > @@ -0,0 +1,54 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs > > + > > +maintainers: > > + - Marcus Folkesson <marcus.folkesson@gmail.com> > > + > > +description: | > > + Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit > > DAC. > > + Datasheet can be found here: > > https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - lltc,ltc1660 > > + - lltc,ltc1665 > > + > > + reg: > > + description: SPI chip select number for the device > > You can remove description. > It's a standard property. > Ok, I will remove it. > > + maxItems: 1 > > + > > + spi-max-frequency: > > + description: | > > + Definition as per Documentation/devicetree/bindings/spi/spi- > > bus.txt. > > + maximum: 5000000 > > + maxItems: 1 > > I think you can probably remove `spi-max-frequency` from here. > It's documented in the base SPI schema. > Yes it is, and I was not really sure if I should include that property, but I wanted to somehow document the maximum frequency that the chip can handle as it could be useful information. > > + > > + vref-supply: > > + description: Phandle to the external reference voltage supply. > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - vref-supply > > + > > +examples: > > + - | > > + spi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + dac@0 { > > + compatible = "lltc,ltc1660"; > > + reg = <0>; > > + spi-max-frequency = <5000000>; > > + vref-supply = <&vref_reg>; > > + }; > > + }; > > diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > deleted file mode 100644 > > index c5b5f22d6c64..000000000000 > > --- a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > +++ /dev/null > > @@ -1,21 +0,0 @@ > > -* Linear Technology Micropower octal 8-Bit and 10-Bit DACs > > - > > -Required properties: > > - - compatible: Must be one of the following: > > - "lltc,ltc1660" > > - "lltc,ltc1665" > > - - reg: SPI chip select number for the device > > - - vref-supply: Phandle to the voltage reference supply > > - > > -Recommended properties: > > - - spi-max-frequency: Definition as per > > - Documentation/devicetree/bindings/spi/spi-bus.txt. > > - Max frequency for this chip is 5 MHz. > > - > > -Example: > > -dac@0 { > > - compatible = "lltc,ltc1660"; > > - reg = <0>; > > - spi-max-frequency = <5000000>; > > - vref-supply = <&vref_reg>; > > -}; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index fbccc9d450ff..23497d713298 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -9619,7 +9619,7 @@ LTC1660 DAC DRIVER > > M: Marcus Folkesson <marcus.folkesson@gmail.com> > > L: linux-iio@vger.kernel.org > > S: Maintained > > -F: Documentation/devicetree/bindings/iio/dac/ltc1660.txt > > +F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml > > F: drivers/iio/dac/ltc1660.c > > > > LTC4261 HARDWARE MONITOR DRIVER I guess I wait for Robs review until I post a v2. Thanks, Marcus Folkesson
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml new file mode 100644 index 000000000000..1f3136bfffcd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + +description: | + Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC. + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf + +properties: + compatible: + enum: + - lltc,ltc1660 + - lltc,ltc1665 + + reg: + description: SPI chip select number for the device + maxItems: 1 + + spi-max-frequency: + description: | + Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt. + maximum: 5000000 + maxItems: 1 + + vref-supply: + description: Phandle to the external reference voltage supply. + maxItems: 1 + +required: + - compatible + - reg + - vref-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "lltc,ltc1660"; + reg = <0>; + spi-max-frequency = <5000000>; + vref-supply = <&vref_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt deleted file mode 100644 index c5b5f22d6c64..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Linear Technology Micropower octal 8-Bit and 10-Bit DACs - -Required properties: - - compatible: Must be one of the following: - "lltc,ltc1660" - "lltc,ltc1665" - - reg: SPI chip select number for the device - - vref-supply: Phandle to the voltage reference supply - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt. - Max frequency for this chip is 5 MHz. - -Example: -dac@0 { - compatible = "lltc,ltc1660"; - reg = <0>; - spi-max-frequency = <5000000>; - vref-supply = <&vref_reg>; -}; diff --git a/MAINTAINERS b/MAINTAINERS index fbccc9d450ff..23497d713298 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9619,7 +9619,7 @@ LTC1660 DAC DRIVER M: Marcus Folkesson <marcus.folkesson@gmail.com> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/iio/dac/ltc1660.txt +F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml F: drivers/iio/dac/ltc1660.c LTC4261 HARDWARE MONITOR DRIVER
Rewrite bindings to use json-schema vocabulary. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> --- .../bindings/iio/dac/lltc,ltc1660.yaml | 54 +++++++++++++++++++ .../devicetree/bindings/iio/dac/ltc1660.txt | 21 -------- MAINTAINERS | 2 +- 3 files changed, 55 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc1660.txt