diff mbox series

iio: ssp_sensors: Convert to use GPIO descriptors

Message ID 20191202085350.77149-1-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show
Series iio: ssp_sensors: Convert to use GPIO descriptors | expand

Commit Message

Linus Walleij Dec. 2, 2019, 8:53 a.m. UTC 
These three GPIO lines used by the Samsung sensor hub is pretty
straight-forward to convert to use GPIO descriptors.

Cc: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/iio/common/ssp_sensors/ssp.h     | 14 ++++++------
 drivers/iio/common/ssp_sensors/ssp_dev.c | 29 ++++++++----------------
 drivers/iio/common/ssp_sensors/ssp_spi.c |  8 +++----
 3 files changed, 20 insertions(+), 31 deletions(-)

Comments

Jonathan Cameron Dec. 7, 2019, 10:20 a.m. UTC | #1 
On Mon,  2 Dec 2019 09:53:50 +0100
Linus Walleij <linus.walleij@linaro.org> wrote:

> These three GPIO lines used by the Samsung sensor hub is pretty
> straight-forward to convert to use GPIO descriptors.
> 
> Cc: Karol Wrona <k.wrona@samsung.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This one looks very straight forward, so I've applied it.

However, if anyone else has time to take a look that would be great.

Thanks,

Jonathan

> ---
>  drivers/iio/common/ssp_sensors/ssp.h     | 14 ++++++------
>  drivers/iio/common/ssp_sensors/ssp_dev.c | 29 ++++++++----------------
>  drivers/iio/common/ssp_sensors/ssp_spi.c |  8 +++----
>  3 files changed, 20 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
> index 0a381bb1ae6f..abb832795619 100644
> --- a/drivers/iio/common/ssp_sensors/ssp.h
> +++ b/drivers/iio/common/ssp_sensors/ssp.h
> @@ -7,7 +7,7 @@
>  #define __SSP_SENSORHUB_H__
>  
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/iio/common/ssp_sensors.h>
>  #include <linux/iio/iio.h>
>  #include <linux/spi/spi.h>
> @@ -168,9 +168,9 @@ struct ssp_sensorhub_info {
>   * @fw_dl_state:	firmware download state
>   * @comm_lock:		lock protecting the handshake
>   * @pending_lock:	lock protecting pending list and completion
> - * @mcu_reset_gpio:	mcu reset line
> - * @ap_mcu_gpio:	ap to mcu gpio line
> - * @mcu_ap_gpio:	mcu to ap gpio line
> + * @mcu_reset_gpiod:	mcu reset line
> + * @ap_mcu_gpiod:	ap to mcu gpio line
> + * @mcu_ap_gpiod:	mcu to ap gpio line
>   * @pending_list:	pending list for messages queued to be sent/read
>   * @sensor_devs:	registered IIO devices table
>   * @enable_refcount:	enable reference count for wdt (watchdog timer)
> @@ -212,9 +212,9 @@ struct ssp_data {
>  	struct mutex comm_lock;
>  	struct mutex pending_lock;
>  
> -	int mcu_reset_gpio;
> -	int ap_mcu_gpio;
> -	int mcu_ap_gpio;
> +	struct gpio_desc *mcu_reset_gpiod;
> +	struct gpio_desc *ap_mcu_gpiod;
> +	struct gpio_desc *mcu_ap_gpiod;
>  
>  	struct list_head pending_list;
>  
> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
> index 9c70553994c6..a94dbcf491ce 100644
> --- a/drivers/iio/common/ssp_sensors/ssp_dev.c
> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
> @@ -9,7 +9,6 @@
>  #include <linux/mfd/core.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_platform.h>
>  #include "ssp.h"
>  
> @@ -61,9 +60,9 @@ static const struct mfd_cell sensorhub_sensor_devs[] = {
>  
>  static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data)
>  {
> -	gpio_set_value(data->mcu_reset_gpio, 0);
> +	gpiod_set_value(data->mcu_reset_gpiod, 0);
>  	usleep_range(1000, 1200);
> -	gpio_set_value(data->mcu_reset_gpio, 1);
> +	gpiod_set_value(data->mcu_reset_gpiod, 1);
>  	msleep(50);
>  }
>  
> @@ -441,7 +440,6 @@ MODULE_DEVICE_TABLE(of, ssp_of_match);
>  
>  static struct ssp_data *ssp_parse_dt(struct device *dev)
>  {
> -	int ret;
>  	struct ssp_data *data;
>  	struct device_node *node = dev->of_node;
>  	const struct of_device_id *match;
> @@ -450,26 +448,17 @@ static struct ssp_data *ssp_parse_dt(struct device *dev)
>  	if (!data)
>  		return NULL;
>  
> -	data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpios", 0);
> -	if (data->mcu_ap_gpio < 0)
> -		return NULL;
> -
> -	data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpios", 0);
> -	if (data->ap_mcu_gpio < 0)
> -		return NULL;
> -
> -	data->mcu_reset_gpio = of_get_named_gpio(node, "mcu-reset-gpios", 0);
> -	if (data->mcu_reset_gpio < 0)
> +	data->mcu_ap_gpiod = devm_gpiod_get(dev, "mcu-ap", GPIOD_IN);
> +	if (IS_ERR(data->mcu_ap_gpiod))
>  		return NULL;
>  
> -	ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
> -				    "ap-mcu-gpios");
> -	if (ret)
> +	data->ap_mcu_gpiod = devm_gpiod_get(dev, "ap-mcu", GPIOD_OUT_HIGH);
> +	if (IS_ERR(data->ap_mcu_gpiod))
>  		return NULL;
>  
> -	ret = devm_gpio_request_one(dev, data->mcu_reset_gpio,
> -				    GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios");
> -	if (ret)
> +	data->mcu_reset_gpiod = devm_gpiod_get(dev, "mcu-reset",
> +					       GPIOD_OUT_HIGH);
> +	if (IS_ERR(data->mcu_reset_gpiod))
>  		return NULL;
>  
>  	match = of_match_node(ssp_of_match, node);
> diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
> index 7db3d5886e3e..4864c38b8d1c 100644
> --- a/drivers/iio/common/ssp_sensors/ssp_spi.c
> +++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
> @@ -155,9 +155,9 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
>  {
>  	int delay_cnt = 0;
>  
> -	gpio_set_value_cansleep(data->ap_mcu_gpio, state);
> +	gpiod_set_value_cansleep(data->ap_mcu_gpiod, state);
>  
> -	while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) {
> +	while (gpiod_get_value_cansleep(data->mcu_ap_gpiod) != state) {
>  		usleep_range(3000, 3500);
>  
>  		if (data->shut_down || delay_cnt++ > 500) {
> @@ -165,7 +165,7 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
>  				__func__, state);
>  
>  			if (!state)
> -				gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
> +				gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
>  
>  			return -ETIMEDOUT;
>  		}
> @@ -197,7 +197,7 @@ static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
>  
>  	status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
>  	if (status < 0) {
> -		gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
> +		gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
>  		dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
>  		goto _error_locked;
>  	}
diff mbox series

Patch

diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
index 0a381bb1ae6f..abb832795619 100644
--- a/drivers/iio/common/ssp_sensors/ssp.h
+++ b/drivers/iio/common/ssp_sensors/ssp.h
@@ -7,7 +7,7 @@ 
 #define __SSP_SENSORHUB_H__
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/iio/common/ssp_sensors.h>
 #include <linux/iio/iio.h>
 #include <linux/spi/spi.h>
@@ -168,9 +168,9 @@  struct ssp_sensorhub_info {
  * @fw_dl_state:	firmware download state
  * @comm_lock:		lock protecting the handshake
  * @pending_lock:	lock protecting pending list and completion
- * @mcu_reset_gpio:	mcu reset line
- * @ap_mcu_gpio:	ap to mcu gpio line
- * @mcu_ap_gpio:	mcu to ap gpio line
+ * @mcu_reset_gpiod:	mcu reset line
+ * @ap_mcu_gpiod:	ap to mcu gpio line
+ * @mcu_ap_gpiod:	mcu to ap gpio line
  * @pending_list:	pending list for messages queued to be sent/read
  * @sensor_devs:	registered IIO devices table
  * @enable_refcount:	enable reference count for wdt (watchdog timer)
@@ -212,9 +212,9 @@  struct ssp_data {
 	struct mutex comm_lock;
 	struct mutex pending_lock;
 
-	int mcu_reset_gpio;
-	int ap_mcu_gpio;
-	int mcu_ap_gpio;
+	struct gpio_desc *mcu_reset_gpiod;
+	struct gpio_desc *ap_mcu_gpiod;
+	struct gpio_desc *mcu_ap_gpiod;
 
 	struct list_head pending_list;
 
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 9c70553994c6..a94dbcf491ce 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -9,7 +9,6 @@ 
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/of_platform.h>
 #include "ssp.h"
 
@@ -61,9 +60,9 @@  static const struct mfd_cell sensorhub_sensor_devs[] = {
 
 static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data)
 {
-	gpio_set_value(data->mcu_reset_gpio, 0);
+	gpiod_set_value(data->mcu_reset_gpiod, 0);
 	usleep_range(1000, 1200);
-	gpio_set_value(data->mcu_reset_gpio, 1);
+	gpiod_set_value(data->mcu_reset_gpiod, 1);
 	msleep(50);
 }
 
@@ -441,7 +440,6 @@  MODULE_DEVICE_TABLE(of, ssp_of_match);
 
 static struct ssp_data *ssp_parse_dt(struct device *dev)
 {
-	int ret;
 	struct ssp_data *data;
 	struct device_node *node = dev->of_node;
 	const struct of_device_id *match;
@@ -450,26 +448,17 @@  static struct ssp_data *ssp_parse_dt(struct device *dev)
 	if (!data)
 		return NULL;
 
-	data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpios", 0);
-	if (data->mcu_ap_gpio < 0)
-		return NULL;
-
-	data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpios", 0);
-	if (data->ap_mcu_gpio < 0)
-		return NULL;
-
-	data->mcu_reset_gpio = of_get_named_gpio(node, "mcu-reset-gpios", 0);
-	if (data->mcu_reset_gpio < 0)
+	data->mcu_ap_gpiod = devm_gpiod_get(dev, "mcu-ap", GPIOD_IN);
+	if (IS_ERR(data->mcu_ap_gpiod))
 		return NULL;
 
-	ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
-				    "ap-mcu-gpios");
-	if (ret)
+	data->ap_mcu_gpiod = devm_gpiod_get(dev, "ap-mcu", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->ap_mcu_gpiod))
 		return NULL;
 
-	ret = devm_gpio_request_one(dev, data->mcu_reset_gpio,
-				    GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios");
-	if (ret)
+	data->mcu_reset_gpiod = devm_gpiod_get(dev, "mcu-reset",
+					       GPIOD_OUT_HIGH);
+	if (IS_ERR(data->mcu_reset_gpiod))
 		return NULL;
 
 	match = of_match_node(ssp_of_match, node);
diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
index 7db3d5886e3e..4864c38b8d1c 100644
--- a/drivers/iio/common/ssp_sensors/ssp_spi.c
+++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
@@ -155,9 +155,9 @@  static int ssp_check_lines(struct ssp_data *data, bool state)
 {
 	int delay_cnt = 0;
 
-	gpio_set_value_cansleep(data->ap_mcu_gpio, state);
+	gpiod_set_value_cansleep(data->ap_mcu_gpiod, state);
 
-	while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) {
+	while (gpiod_get_value_cansleep(data->mcu_ap_gpiod) != state) {
 		usleep_range(3000, 3500);
 
 		if (data->shut_down || delay_cnt++ > 500) {
@@ -165,7 +165,7 @@  static int ssp_check_lines(struct ssp_data *data, bool state)
 				__func__, state);
 
 			if (!state)
-				gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+				gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
 
 			return -ETIMEDOUT;
 		}
@@ -197,7 +197,7 @@  static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
 
 	status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
 	if (status < 0) {
-		gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+		gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
 		dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
 		goto _error_locked;
 	}