| Message ID | 20200105124957.7acd54b5@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL] First set of IIO new device support, features and cleanups for the 5.6 cycle | expand |
Hi Greg, I did see a merge conflict when merging this your staging/staging-next around deletion of include/Kbuild I've not been following what has been going on around that, but simply removing the file seems to be the obvious solution. Thanks, Jonathan On Sun, 5 Jan 2020 12:49:57 +0000 Jonathan Cameron <jic23@kernel.org> wrote: > The following changes since commit 2611045e3555cd0d75837ae69ffd70ef51e28bf7: > > staging: vchiq: Refactor indentation in vchiq_platform_conn_state_changed() (2019-11-15 14:14:55 +0800) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.6a > > for you to fetch changes up to c1d1c4a62db5c4745b9e15cfee0daf0f774f73fc: > > iio: accel: bma180: BMA254 support (2019-12-30 16:29:09 +0000) > > ---------------------------------------------------------------- > First set of new device support, features and cleanups for IIO in the 5.6 cycle > > New device support > > * ad7091r5 ADC > - New driver with follow up patch adding scale and vref support. > - DT bindings > * ad7923 > - Support for ad7908, ad7918 and ad7928 added to driver. > * bma180 > - Support the BMA254 accelerometer. Required fairly substantial rework > to allow for small differences between this an existing parts. > * bma400 accelerometer > - New driver with follow up patch for regulator support. > - DT bindings. > * asc dlhl60d > - New driver support this range of pressure and temperature sensors. > - DT bindings. > * ltc2496 ADC > - New driver to support this ADC. > - Split the existing LTC2497 driver generic component out and reuse. > - DT bindings. > * parallax ping > - New driver supporting ultrasonic and laser tof distance sensors. > - Bindings for these sensors. > > New features > > * core > - New char type for read_raw returns, used for thermocouple types. > - Rename read_first_n callback to read. The reasons behind the original > naming are lost to the mists of time. > * ad799x > - Allow pm_ops to disable device completely allowing regulator power down. > * bma180 > - Enable basic regulator support. > * dmaengine buffer > - Report platform data alignment requirements via new ABI. > * max31856 > - Add option to set mains filter rejection frequency and document > new in_temp_filter_notch_center_frequency ABI. > - Add support for configuring HW averaging (oversampling ratio) > - Add runtime configuration of thermocouple type and document new ABI. > * maxim-thermocouple > - Add read only access to thermocouple type using new ABI, includes > adding more specific compatibles to reflect which variant of the > chip is being used. > * mpu6050 > - Provide option to support the PMU9150 in package magnetometer directly > rather than via auxiliary bus. > * stm32_adc > - Add overrun interrupt checks to detect if this happens. > * st_lsm6dsx > - Enable the sensor-hub support for lsm6dsm. Includes various reworks to > allow this. > > Cleanups and minor fixes > > * Subsystem wide > - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. > - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. > * ad7266 > - Convert to GPIO descriptors. > * ad7303 > - Avoid a dance with checking if the regulator is supplied by just > using the optional request interface. > * ad7887 > - Simplify channel specification assignment to enable adding more devices. > * ad7923 > - Drop some unused and largely pointless defines of BOB_N==N variety. > - Tidy up checkpatch warnings. > - Add missing of_device_id table. > * adf4350 > - Convert to GPIO descriptors. > * ak8975 > - Convert to GPIO descriptors. > * ADIS library and drivers > - Expand scope of txrx_lock to cover all state and rename as state_lock > - Add unlocked read / write to allow grouping of consecutive calls under > single lock / unlock. > - Add unlocked check_status, reset to allow grouping under single > lock / unlock. > - Remove remaining uses of core mlock for local state protection. > mlock should never be used directly as it protects tightly defined > core IIO device management state. > * adis16240 > - Enforce only supported SPI mode on driver load + add DT binding doc. > * atlas-ph-sensor > - Rename to atlas-sensor given it now covers things beyond ph sensors. > * bma180 > - Use local dev variable to tidy up code. > - Use c99 style explicity .member assignment to make driver more readable. > * bmp280 > - Drop ACPI support. No evidence this was used and appropriate ID is not > registered. > - Allow ACPI to bind device via PRP0001 > * dmaengine buffer > - Use dma_request_chan instead of dma_request_slave_channel_reason as that > ABI is going away. > - Add module info to avoid tainting the kernel. > * hts221 > - Avoid magic number defines when only used to fill structure elements > that are self describing. > * lm3533 > - Drop a stray semicolon. > * max9611 > - Cleanup enum handling to be more resilient to future changes. > * mpu6050 > - Delete MPU9150 from supported SPI devices as doesn't provide SPI. > - Select I2C_MUX again after kbuild issue fixed elsewhere. > * stm32-timer > - Drop an unnecessary register update. > * ssp_sensors > - Convert to GPIO descriptors. > * st_sensors > - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used > anyway. > - Make default platform data structures __maybe_unsued. > - Fill in some missing kernel-doc function parameters. > * st_lsm6dsx > - white space fixes. > - Mark some constants that aren't always used as __maybe_unused. > - Drop of ID table guards as they just pervent use under ACPI. > - Switch to device properties to allow ACPI usage. > * st_uvis25 > - Drop acpi.h include as no ACPI APIs used. > * ti-ads1015 > - Drop legacy platform data as no one seems to be using it. > - Use the device property API instead of OF specific. > * ti-ads7950 > - typo fix in error message. > > ---------------------------------------------------------------- > Alexandru Ardelean (11): > iio: imu: adis: rename txrx_lock -> state_lock > iio: imu: adis: add unlocked read/write function versions > iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq() > iio: imu: adis: create an unlocked version of adis_check_status() > iio: imu: adis: create an unlocked version of adis_reset() > iio: imu: adis: protect initial startup routine with state lock > iio: imu: adis: group single conversion under a single state lock > iio: imu: adis16400: rework locks using ADIS library's state lock > iio: gyro: adis16136: rework locks using ADIS library's state lock > iio: imu: adis16480: use state lock for filter freq set > iio: gyro: adis16260: replace mlock with ADIS lib's state_lock > > Alexandru Tachici (1): > iio: dac: ad7303: use regulator get optional to check for ext supply > > Andrea Merello (9): > iio: max31856: add option for setting mains filter rejection frequency > Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file > iio: max31856: add support for configuring the HW averaging > iio: core: add char type for sysfs attributes > iio: core: add thermocouple_type standard attribute > Documentation: ABI: document IIO thermocouple_type file > iio: max31856: add support for runtime-configuring the thermocouple type > iio: maxim_thermocouple: add thermocouple_type sysfs attribute > dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings > > Andreas Klinger (4): > dt-bindings: add vendor prefix parallax > dt-bindings: add parallax ping sensors > MAINTAINERS: add maintainer for ping iio sensors > iio: ping: add parallax ping sensors > > Andy Shevchenko (14): > iio: adc: ti-ads1015: Get rid of legacy platform data > iio: adc: ti-ads1015: Make use of device property API > iio: st_lsm6dsx: Mark predefined constants with __maybe_unused > iio: st_lsm6dsx: Drop unneeded OF code > iio: st_lsm6dsx: Make use of device properties > iio: light: st_uvis25: Drop unneeded header inclusion > iio: accel: st_accel: Drop unnecessary #else branch for ACPI > iio: pressure: st_press: Drop unnecessary #else branch for ACPI > iio: gyro: st_gyro: Mark gyro_pdata with __maybe_unused > iio: accel: st_accel: Mark default_accel_pdata with __maybe_unused > iio: pressure: st_press: Mark default_press_pdata with __maybe_unused > iio: st_sensors: Describe function parameters in kernel-doc > iio: pressure: bmp280: Drop ACPI support > iio: pressure: bmp280: Allow device to be enumerated from ACPI > > Beniamin Bia (4): > dt-binding: iio: Add documentation for AD7091R5 > MAINTAINERS: add entry for AD7091R5 driver > iio: adc: ad7887: Cleanup channel assignment > iio: adc: Move AD7091R5 entry in a alphabetical order in Makefile > > Chen Zhou (1): > iio: light: remove unneeded semicolon > > Christophe JAILLET (1): > iio: adc: ti-ads7950: Fix a typo in an error message > > Dan Robertson (3): > dt-bindings: iio: accel: bma400: add bindings > iio: accel: Add driver for the BMA400 > iio: accel: bma400: basic regulator support > > Daniel Junho (4): > iio: adc: ad7923: Remove the unused defines > iio: adc: ad7923: Fix checkpatch warning > iio: adc: ad7923: Add of_device_id table > iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928 > > Fabrice Gasnier (2): > iio: trigger: stm32-timer: remove unnecessary update event > iio: adc: stm32-adc: Add check on overrun interrupt > > Geert Uytterhoeven (1): > iio: adc: max9611: Make enum relations more future proof > > Jean-Baptiste Maneyrol (2): > iio: imu: inv_mpu6050: delete not existing MPU9150 spi support > iio: imu: inv_mpu6050: add support of MPU9150 magnetometer > > Krzysztof Kozlowski (1): > iio: Fix Kconfig indentation > > Lars-Peter Clausen (3): > iio: buffer-dmaengine: Add module information > iio: buffer-dmaengine: Report buffer length requirements > iio: buffer: rename 'read_first_n' callback to 'read' > > Linus Walleij (16): > iio: imu: inv_mpu6050: Select I2C_MUX again > iio: ak8975: Convert to use GPIO descriptor > iio: as3935: Drop GPIO includes > iio: si1145: Drop GPIO include > iio: ad2s1200: Drop legacy include > iio: apds9960: Drop GPIO includes > iio: itg3200: Drop GPIO include > iio: adf4350: Convert to use GPIO descriptor > iio: ad5592r: Drop surplus GPIO header > iio: ad7266: Convert to use GPIO descriptors > iio: atlas-ph-sensor: Drop GPIO include > iio: ssp_sensors: Convert to use GPIO descriptors > iio: accel: bma180: Add dev helper variable > iio: accel: bma180: Basic regulator support > iio: accel: bma180: Use explicit member assignment > iio: accel: bma180: BMA254 support > > Lorenzo Bianconi (8): > iio: imu: st_lsm6dsx: fix checkpatch warning > iio: humidity: hts221: move register definitions to sensor structs > iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings > iio: imu: st_lsm6dsx: check if master_enable is located in primary page > iio: imu: st_lsm6dsx: check if pull_up is located in primary page > iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page > iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output > iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm > > Marco Felsch (1): > iio: adc: ad799x: add pm_ops to disable the device completely > > Matt Ranostay (1): > iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor > > Olivier Moysan (1): > dt-bindings: iio: adc: convert sd modulator to json-schema > > Paul Cercueil (2): > iio: adc: Add support for AD7091R5 ADC > iio: adc: ad7091r5: Add scale and external VREF support > > Peter Ujfalusi (1): > iio: buffer-dmaengine: Use dma_request_chan() directly for channel request > > Rodrigo Carvalho (2): > staging: iio: accel: adis16240: enforce SPI mode on probe function > dt-bindings: iio: accel: add binding documentation for ADIS16240 > > Tomislav Denis (3): > iio: pressure: Add driver for DLH pressure sensors > dt-bindings: Add asc vendor > bindings: iio: pressure: Add documentation for dlh driver > > Uwe Kleine-König (3): > iio: adc: ltc2496: provide device tree binding document > iio: adc: ltc2497: split protocol independent part in a separate module > iio: adc: new driver to support Linear technology's ltc2496 > > Documentation/ABI/testing/sysfs-bus-iio | 13 + > Documentation/ABI/testing/sysfs-bus-iio-dma-buffer | 19 + > .../bindings/iio/accel/adi,adis16240.yaml | 49 ++ > .../devicetree/bindings/iio/accel/bma180.txt | 7 +- > .../bindings/iio/accel/bosch,bma400.yaml | 54 ++ > .../devicetree/bindings/iio/adc/adi,ad7091r5.yaml | 54 ++ > .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 47 ++ > .../bindings/iio/adc/sigma-delta-modulator.txt | 13 - > .../bindings/iio/adc/sigma-delta-modulator.yaml | 37 + > .../bindings/iio/pressure/asc,dlhl60d.yaml | 51 ++ > .../bindings/iio/proximity/parallax-ping.yaml | 51 ++ > .../iio/temperature/maxim_thermocouple.txt | 7 +- > .../devicetree/bindings/vendor-prefixes.yaml | 4 + > MAINTAINERS | 32 +- > drivers/iio/accel/Kconfig | 20 +- > drivers/iio/accel/Makefile | 2 + > drivers/iio/accel/bma180.c | 225 +++++- > drivers/iio/accel/bma400.h | 99 +++ > drivers/iio/accel/bma400_core.c | 852 +++++++++++++++++++++ > drivers/iio/accel/bma400_i2c.c | 61 ++ > drivers/iio/accel/st_accel.h | 2 +- > drivers/iio/accel/st_accel_i2c.c | 2 - > drivers/iio/adc/Kconfig | 17 + > drivers/iio/adc/Makefile | 4 +- > drivers/iio/adc/ad7091r-base.c | 298 +++++++ > drivers/iio/adc/ad7091r-base.h | 26 + > drivers/iio/adc/ad7091r5.c | 113 +++ > drivers/iio/adc/ad7266.c | 29 +- > drivers/iio/adc/ad7887.c | 82 +- > drivers/iio/adc/ad7923.c | 64 +- > drivers/iio/adc/ad799x.c | 66 +- > drivers/iio/adc/ltc2496.c | 108 +++ > drivers/iio/adc/ltc2497-core.c | 243 ++++++ > drivers/iio/adc/ltc2497.c | 234 +----- > drivers/iio/adc/ltc2497.h | 18 + > drivers/iio/adc/max9611.c | 36 +- > drivers/iio/adc/stm32-adc-core.c | 14 +- > drivers/iio/adc/stm32-adc-core.h | 9 + > drivers/iio/adc/stm32-adc.c | 55 +- > drivers/iio/adc/ti-ads1015.c | 73 +- > drivers/iio/adc/ti-ads7950.c | 2 +- > drivers/iio/buffer/industrialio-buffer-dma.c | 2 +- > drivers/iio/buffer/industrialio-buffer-dmaengine.c | 30 +- > drivers/iio/buffer/kfifo_buf.c | 5 +- > drivers/iio/chemical/Makefile | 2 +- > .../chemical/{atlas-ph-sensor.c => atlas-sensor.c} | 11 +- > drivers/iio/common/ssp_sensors/ssp.h | 14 +- > drivers/iio/common/ssp_sensors/ssp_dev.c | 29 +- > drivers/iio/common/ssp_sensors/ssp_spi.c | 8 +- > drivers/iio/common/st_sensors/st_sensors_trigger.c | 3 + > drivers/iio/dac/ad5592r-base.c | 1 - > drivers/iio/dac/ad7303.c | 25 +- > drivers/iio/frequency/adf4350.c | 30 +- > drivers/iio/gyro/Kconfig | 32 +- > drivers/iio/gyro/adis16136.c | 31 +- > drivers/iio/gyro/adis16260.c | 6 +- > drivers/iio/gyro/itg3200_core.c | 1 - > drivers/iio/gyro/st_gyro.h | 2 +- > drivers/iio/humidity/hts221_core.c | 19 +- > drivers/iio/iio_core.h | 8 +- > drivers/iio/imu/adis.c | 94 +-- > drivers/iio/imu/adis16400.c | 51 +- > drivers/iio/imu/adis16480.c | 17 +- > drivers/iio/imu/adis_buffer.c | 4 +- > drivers/iio/imu/inv_mpu6050/Kconfig | 9 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 57 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 + > drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 80 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 - > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 30 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 27 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 110 ++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 3 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 76 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 3 +- > drivers/iio/industrialio-buffer.c | 10 +- > drivers/iio/industrialio-core.c | 25 +- > drivers/iio/light/apds9960.c | 2 - > drivers/iio/light/lm3533-als.c | 2 +- > drivers/iio/light/si1145.c | 1 - > drivers/iio/light/st_uvis25_i2c.c | 1 - > drivers/iio/magnetometer/ak8975.c | 54 +- > drivers/iio/pressure/Kconfig | 12 + > drivers/iio/pressure/Makefile | 1 + > drivers/iio/pressure/bmp280-i2c.c | 18 +- > drivers/iio/pressure/dlhl60d.c | 375 +++++++++ > drivers/iio/pressure/st_pressure.h | 2 +- > drivers/iio/pressure/st_pressure_i2c.c | 2 - > drivers/iio/proximity/Kconfig | 15 + > drivers/iio/proximity/Makefile | 1 + > drivers/iio/proximity/as3935.c | 3 - > drivers/iio/proximity/ping.c | 335 ++++++++ > drivers/iio/resolver/ad2s1200.c | 1 - > drivers/iio/temperature/max31856.c | 134 +++- > drivers/iio/temperature/maxim_thermocouple.c | 44 +- > drivers/iio/trigger/stm32-timer-trigger.c | 3 - > drivers/staging/iio/accel/adis16240.c | 7 + > include/Kbuild | 1 - > include/linux/iio/buffer_impl.h | 6 +- > include/linux/iio/frequency/adf4350.h | 4 - > include/linux/iio/imu/adis.h | 150 +++- > include/linux/iio/magnetometer/ak8975.h | 2 - > include/linux/iio/types.h | 2 + > include/linux/platform_data/ad7266.h | 3 - > include/linux/platform_data/ads1015.h | 23 - > 106 files changed, 4394 insertions(+), 861 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dma-buffer > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml > create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml > create mode 100644 Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml > delete mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt > create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml > create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml > create mode 100644 Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml > create mode 100644 drivers/iio/accel/bma400.h > create mode 100644 drivers/iio/accel/bma400_core.c > create mode 100644 drivers/iio/accel/bma400_i2c.c > create mode 100644 drivers/iio/adc/ad7091r-base.c > create mode 100644 drivers/iio/adc/ad7091r-base.h > create mode 100644 drivers/iio/adc/ad7091r5.c > create mode 100644 drivers/iio/adc/ltc2496.c > create mode 100644 drivers/iio/adc/ltc2497-core.c > create mode 100644 drivers/iio/adc/ltc2497.h > rename drivers/iio/chemical/{atlas-ph-sensor.c => atlas-sensor.c} (98%) > create mode 100644 drivers/iio/pressure/dlhl60d.c > create mode 100644 drivers/iio/proximity/ping.c > delete mode 100644 include/linux/platform_data/ads1015.h
On Sun, Jan 05, 2020 at 12:53:33PM +0000, Jonathan Cameron wrote: > Hi Greg, > > I did see a merge conflict when merging this your staging/staging-next > around deletion of include/Kbuild > > I've not been following what has been going on around that, but simply > removing the file seems to be the obvious solution. Looks sane, now pulled and pushed out, thanks. greg k-h
The following changes since commit 2611045e3555cd0d75837ae69ffd70ef51e28bf7: staging: vchiq: Refactor indentation in vchiq_platform_conn_state_changed() (2019-11-15 14:14:55 +0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.6a for you to fetch changes up to c1d1c4a62db5c4745b9e15cfee0daf0f774f73fc: iio: accel: bma180: BMA254 support (2019-12-30 16:29:09 +0000) ---------------------------------------------------------------- First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. ---------------------------------------------------------------- Alexandru Ardelean (11): iio: imu: adis: rename txrx_lock -> state_lock iio: imu: adis: add unlocked read/write function versions iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq() iio: imu: adis: create an unlocked version of adis_check_status() iio: imu: adis: create an unlocked version of adis_reset() iio: imu: adis: protect initial startup routine with state lock iio: imu: adis: group single conversion under a single state lock iio: imu: adis16400: rework locks using ADIS library's state lock iio: gyro: adis16136: rework locks using ADIS library's state lock iio: imu: adis16480: use state lock for filter freq set iio: gyro: adis16260: replace mlock with ADIS lib's state_lock Alexandru Tachici (1): iio: dac: ad7303: use regulator get optional to check for ext supply Andrea Merello (9): iio: max31856: add option for setting mains filter rejection frequency Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file iio: max31856: add support for configuring the HW averaging iio: core: add char type for sysfs attributes iio: core: add thermocouple_type standard attribute Documentation: ABI: document IIO thermocouple_type file iio: max31856: add support for runtime-configuring the thermocouple type iio: maxim_thermocouple: add thermocouple_type sysfs attribute dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings Andreas Klinger (4): dt-bindings: add vendor prefix parallax dt-bindings: add parallax ping sensors MAINTAINERS: add maintainer for ping iio sensors iio: ping: add parallax ping sensors Andy Shevchenko (14): iio: adc: ti-ads1015: Get rid of legacy platform data iio: adc: ti-ads1015: Make use of device property API iio: st_lsm6dsx: Mark predefined constants with __maybe_unused iio: st_lsm6dsx: Drop unneeded OF code iio: st_lsm6dsx: Make use of device properties iio: light: st_uvis25: Drop unneeded header inclusion iio: accel: st_accel: Drop unnecessary #else branch for ACPI iio: pressure: st_press: Drop unnecessary #else branch for ACPI iio: gyro: st_gyro: Mark gyro_pdata with __maybe_unused iio: accel: st_accel: Mark default_accel_pdata with __maybe_unused iio: pressure: st_press: Mark default_press_pdata with __maybe_unused iio: st_sensors: Describe function parameters in kernel-doc iio: pressure: bmp280: Drop ACPI support iio: pressure: bmp280: Allow device to be enumerated from ACPI Beniamin Bia (4): dt-binding: iio: Add documentation for AD7091R5 MAINTAINERS: add entry for AD7091R5 driver iio: adc: ad7887: Cleanup channel assignment iio: adc: Move AD7091R5 entry in a alphabetical order in Makefile Chen Zhou (1): iio: light: remove unneeded semicolon Christophe JAILLET (1): iio: adc: ti-ads7950: Fix a typo in an error message Dan Robertson (3): dt-bindings: iio: accel: bma400: add bindings iio: accel: Add driver for the BMA400 iio: accel: bma400: basic regulator support Daniel Junho (4): iio: adc: ad7923: Remove the unused defines iio: adc: ad7923: Fix checkpatch warning iio: adc: ad7923: Add of_device_id table iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928 Fabrice Gasnier (2): iio: trigger: stm32-timer: remove unnecessary update event iio: adc: stm32-adc: Add check on overrun interrupt Geert Uytterhoeven (1): iio: adc: max9611: Make enum relations more future proof Jean-Baptiste Maneyrol (2): iio: imu: inv_mpu6050: delete not existing MPU9150 spi support iio: imu: inv_mpu6050: add support of MPU9150 magnetometer Krzysztof Kozlowski (1): iio: Fix Kconfig indentation Lars-Peter Clausen (3): iio: buffer-dmaengine: Add module information iio: buffer-dmaengine: Report buffer length requirements iio: buffer: rename 'read_first_n' callback to 'read' Linus Walleij (16): iio: imu: inv_mpu6050: Select I2C_MUX again iio: ak8975: Convert to use GPIO descriptor iio: as3935: Drop GPIO includes iio: si1145: Drop GPIO include iio: ad2s1200: Drop legacy include iio: apds9960: Drop GPIO includes iio: itg3200: Drop GPIO include iio: adf4350: Convert to use GPIO descriptor iio: ad5592r: Drop surplus GPIO header iio: ad7266: Convert to use GPIO descriptors iio: atlas-ph-sensor: Drop GPIO include iio: ssp_sensors: Convert to use GPIO descriptors iio: accel: bma180: Add dev helper variable iio: accel: bma180: Basic regulator support iio: accel: bma180: Use explicit member assignment iio: accel: bma180: BMA254 support Lorenzo Bianconi (8): iio: imu: st_lsm6dsx: fix checkpatch warning iio: humidity: hts221: move register definitions to sensor structs iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm Marco Felsch (1): iio: adc: ad799x: add pm_ops to disable the device completely Matt Ranostay (1): iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor Olivier Moysan (1): dt-bindings: iio: adc: convert sd modulator to json-schema Paul Cercueil (2): iio: adc: Add support for AD7091R5 ADC iio: adc: ad7091r5: Add scale and external VREF support Peter Ujfalusi (1): iio: buffer-dmaengine: Use dma_request_chan() directly for channel request Rodrigo Carvalho (2): staging: iio: accel: adis16240: enforce SPI mode on probe function dt-bindings: iio: accel: add binding documentation for ADIS16240 Tomislav Denis (3): iio: pressure: Add driver for DLH pressure sensors dt-bindings: Add asc vendor bindings: iio: pressure: Add documentation for dlh driver Uwe Kleine-König (3): iio: adc: ltc2496: provide device tree binding document iio: adc: ltc2497: split protocol independent part in a separate module iio: adc: new driver to support Linear technology's ltc2496 Documentation/ABI/testing/sysfs-bus-iio | 13 + Documentation/ABI/testing/sysfs-bus-iio-dma-buffer | 19 + .../bindings/iio/accel/adi,adis16240.yaml | 49 ++ .../devicetree/bindings/iio/accel/bma180.txt | 7 +- .../bindings/iio/accel/bosch,bma400.yaml | 54 ++ .../devicetree/bindings/iio/adc/adi,ad7091r5.yaml | 54 ++ .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 47 ++ .../bindings/iio/adc/sigma-delta-modulator.txt | 13 - .../bindings/iio/adc/sigma-delta-modulator.yaml | 37 + .../bindings/iio/pressure/asc,dlhl60d.yaml | 51 ++ .../bindings/iio/proximity/parallax-ping.yaml | 51 ++ .../iio/temperature/maxim_thermocouple.txt | 7 +- .../devicetree/bindings/vendor-prefixes.yaml | 4 + MAINTAINERS | 32 +- drivers/iio/accel/Kconfig | 20 +- drivers/iio/accel/Makefile | 2 + drivers/iio/accel/bma180.c | 225 +++++- drivers/iio/accel/bma400.h | 99 +++ drivers/iio/accel/bma400_core.c | 852 +++++++++++++++++++++ drivers/iio/accel/bma400_i2c.c | 61 ++ drivers/iio/accel/st_accel.h | 2 +- drivers/iio/accel/st_accel_i2c.c | 2 - drivers/iio/adc/Kconfig | 17 + drivers/iio/adc/Makefile | 4 +- drivers/iio/adc/ad7091r-base.c | 298 +++++++ drivers/iio/adc/ad7091r-base.h | 26 + drivers/iio/adc/ad7091r5.c | 113 +++ drivers/iio/adc/ad7266.c | 29 +- drivers/iio/adc/ad7887.c | 82 +- drivers/iio/adc/ad7923.c | 64 +- drivers/iio/adc/ad799x.c | 66 +- drivers/iio/adc/ltc2496.c | 108 +++ drivers/iio/adc/ltc2497-core.c | 243 ++++++ drivers/iio/adc/ltc2497.c | 234 +----- drivers/iio/adc/ltc2497.h | 18 + drivers/iio/adc/max9611.c | 36 +- drivers/iio/adc/stm32-adc-core.c | 14 +- drivers/iio/adc/stm32-adc-core.h | 9 + drivers/iio/adc/stm32-adc.c | 55 +- drivers/iio/adc/ti-ads1015.c | 73 +- drivers/iio/adc/ti-ads7950.c | 2 +- drivers/iio/buffer/industrialio-buffer-dma.c | 2 +- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 30 +- drivers/iio/buffer/kfifo_buf.c | 5 +- drivers/iio/chemical/Makefile | 2 +- .../chemical/{atlas-ph-sensor.c => atlas-sensor.c} | 11 +- drivers/iio/common/ssp_sensors/ssp.h | 14 +- drivers/iio/common/ssp_sensors/ssp_dev.c | 29 +- drivers/iio/common/ssp_sensors/ssp_spi.c | 8 +- drivers/iio/common/st_sensors/st_sensors_trigger.c | 3 + drivers/iio/dac/ad5592r-base.c | 1 - drivers/iio/dac/ad7303.c | 25 +- drivers/iio/frequency/adf4350.c | 30 +- drivers/iio/gyro/Kconfig | 32 +- drivers/iio/gyro/adis16136.c | 31 +- drivers/iio/gyro/adis16260.c | 6 +- drivers/iio/gyro/itg3200_core.c | 1 - drivers/iio/gyro/st_gyro.h | 2 +- drivers/iio/humidity/hts221_core.c | 19 +- drivers/iio/iio_core.h | 8 +- drivers/iio/imu/adis.c | 94 +-- drivers/iio/imu/adis16400.c | 51 +- drivers/iio/imu/adis16480.c | 17 +- drivers/iio/imu/adis_buffer.c | 4 +- drivers/iio/imu/inv_mpu6050/Kconfig | 9 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 57 +- drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 + drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 80 +- drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 - drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 30 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 27 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 110 ++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 3 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 76 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 3 +- drivers/iio/industrialio-buffer.c | 10 +- drivers/iio/industrialio-core.c | 25 +- drivers/iio/light/apds9960.c | 2 - drivers/iio/light/lm3533-als.c | 2 +- drivers/iio/light/si1145.c | 1 - drivers/iio/light/st_uvis25_i2c.c | 1 - drivers/iio/magnetometer/ak8975.c | 54 +- drivers/iio/pressure/Kconfig | 12 + drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/bmp280-i2c.c | 18 +- drivers/iio/pressure/dlhl60d.c | 375 +++++++++ drivers/iio/pressure/st_pressure.h | 2 +- drivers/iio/pressure/st_pressure_i2c.c | 2 - drivers/iio/proximity/Kconfig | 15 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/as3935.c | 3 - drivers/iio/proximity/ping.c | 335 ++++++++ drivers/iio/resolver/ad2s1200.c | 1 - drivers/iio/temperature/max31856.c | 134 +++- drivers/iio/temperature/maxim_thermocouple.c | 44 +- drivers/iio/trigger/stm32-timer-trigger.c | 3 - drivers/staging/iio/accel/adis16240.c | 7 + include/Kbuild | 1 - include/linux/iio/buffer_impl.h | 6 +- include/linux/iio/frequency/adf4350.h | 4 - include/linux/iio/imu/adis.h | 150 +++- include/linux/iio/magnetometer/ak8975.h | 2 - include/linux/iio/types.h | 2 + include/linux/platform_data/ad7266.h | 3 - include/linux/platform_data/ads1015.h | 23 - 106 files changed, 4394 insertions(+), 861 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dma-buffer create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml create mode 100644 Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml create mode 100644 drivers/iio/accel/bma400.h create mode 100644 drivers/iio/accel/bma400_core.c create mode 100644 drivers/iio/accel/bma400_i2c.c create mode 100644 drivers/iio/adc/ad7091r-base.c create mode 100644 drivers/iio/adc/ad7091r-base.h create mode 100644 drivers/iio/adc/ad7091r5.c create mode 100644 drivers/iio/adc/ltc2496.c create mode 100644 drivers/iio/adc/ltc2497-core.c create mode 100644 drivers/iio/adc/ltc2497.h rename drivers/iio/chemical/{atlas-ph-sensor.c => atlas-sensor.c} (98%) create mode 100644 drivers/iio/pressure/dlhl60d.c create mode 100644 drivers/iio/proximity/ping.c delete mode 100644 include/linux/platform_data/ads1015.h