| Message ID | 20200128133052.201587-3-david@ixit.cz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iio: light: AL3010 introduction | expand |
28.01.2020 16:30, David Heidelberg пишет: > The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which > provides a multiple gain function with linear response over a dynamic > range 1216/4863/19452/77806. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
On Tue, 28 Jan 2020 14:30:47 +0100, David Heidelberg wrote: > The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which > provides a multiple gain function with linear response over a dynamic > range 1216/4863/19452/77806. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../devicetree/bindings/iio/light/al3010.yaml | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/al3010.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Documentation/devicetree/bindings/iio/light/al3010.example.dts:20.17-30: Warning (reg_format): /example-0/i2c/al3010@1c:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/light/al3010.example.dts:17.5-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus Documentation/devicetree/bindings/iio/light/al3010.example.dts:17.5-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/light/al3010.example.dts:18.23-23.15: Warning (avoid_default_addr_size): /example-0/i2c/al3010@1c: Relying on default #address-cells value Documentation/devicetree/bindings/iio/light/al3010.example.dts:18.23-23.15: Warning (avoid_default_addr_size): /example-0/i2c/al3010@1c: Relying on default #size-cells value /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: al3010@1c: 'interrupt' is a required property See https://patchwork.ozlabs.org/patch/1230351 Please check and re-submit.
31.01.2020 17:24, Rob Herring пишет: > On Tue, 28 Jan 2020 14:30:47 +0100, David Heidelberg wrote: >> The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which >> provides a multiple gain function with linear response over a dynamic >> range 1216/4863/19452/77806. >> >> Signed-off-by: David Heidelberg <david@ixit.cz> >> --- >> .../devicetree/bindings/iio/light/al3010.yaml | 40 +++++++++++++++++++ >> 1 file changed, 40 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/light/al3010.yaml >> > > My bot found errors running 'make dt_binding_check' on your patch: > > Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node > Documentation/devicetree/bindings/iio/light/al3010.example.dts:20.17-30: Warning (reg_format): /example-0/i2c/al3010@1c:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/light/al3010.example.dts:17.5-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus > Documentation/devicetree/bindings/iio/light/al3010.example.dts:17.5-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus > Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' > Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/light/al3010.example.dts:18.23-23.15: Warning (avoid_default_addr_size): /example-0/i2c/al3010@1c: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/light/al3010.example.dts:18.23-23.15: Warning (avoid_default_addr_size): /example-0/i2c/al3010@1c: Relying on default #size-cells value > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/light/al3010.example.dt.yaml: al3010@1c: 'interrupt' is a required property > > See https://patchwork.ozlabs.org/patch/1230351 > Please check and re-submit. > The bot is right. > > +required: > + - compatible > + - reg > + - interrupt ^ (s) is missing > + - vdd-supply
diff --git a/Documentation/devicetree/bindings/iio/light/al3010.yaml b/Documentation/devicetree/bindings/iio/light/al3010.yaml new file mode 100644 index 000000000000..9cd1f34a6d63 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/al3010.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/al3010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3010 sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + - interrupt + - vdd-supply + +examples: + - | + i2c { + al3010@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + };
The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which provides a multiple gain function with linear response over a dynamic range 1216/4863/19452/77806. Signed-off-by: David Heidelberg <david@ixit.cz> --- .../devicetree/bindings/iio/light/al3010.yaml | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/al3010.yaml