| Message ID | 20200422213145.6b0f8c9d@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle | expand |
On Wed, Apr 22, 2020 at 09:31:45PM +0100, Jonathan Cameron wrote: > The following changes since commit 825c6f470c62da05195fab57bb6561ccc1bdafcd: > > staging: mt7621-pci: be sure gpio descriptor is null on fails (2020-03-20 15:10:51 +0100) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.8a Pulled and pushed out, thanks. greg k-h
The following changes since commit 825c6f470c62da05195fab57bb6561ccc1bdafcd: staging: mt7621-pci: be sure gpio descriptor is null on fails (2020-03-20 15:10:51 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.8a for you to fetch changes up to 2de8c02349f02d014e51b43f306d28fc7a23ea6e: iio: magnetometer: ak8974: Silence deferred-probe error (2020-04-19 16:56:43 +0100) ---------------------------------------------------------------- First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. ---------------------------------------------------------------- Aishwarya Ramakrishnan (3): iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource Alexandru Ardelean (24): iio: adc: ad7780: define/use own IIO channel macros iio: adc: ad7791: define/use own IIO channel macros iio: adc: ad7793: define/use own IIO channel macros iio: ad_sigma_delta: remove unused IIO channel macros iio: buffer: re-introduce bitmap_zalloc() for trialmask iio: adc: ad7793: use read_avail iio hook for scale available iio: buffer: drop left-over 'stufftoread' field include: fpga: adi-axi-common.h: fixup whitespace tab -> space include: fpga: adi-axi-common.h: add version helper macros iio: buffer-dmaengine: use %zu specifier for sprintf(align) iio: buffer-dmaengine: add dev-managed calls for buffer alloc dt-bindings: iio: adc: add bindings doc for AXI ADC driver dt-bindings: iio: adc: add bindings doc for AD9467 ADC iio: buffer: remove 'scan_el_attrs' attribute group from buffer struct iio: move 'indio_dev->info' null check first in __iio_device_register() iio: core: drop devm_iio_device_unregister() API call iio: core: drop devm_iio_triggered_buffer_cleanup() API call iio: core: drop devm_iio_device_free() API call iio: core: drop devm_iio_trigger_unregister() API call iio: core: drop devm_iio_trigger_free() API call iio: inkern: drop devm_iio_channel_release{_all} API calls iio: buffer: drop devm_iio_hw_consumer_free() API call iio: buffer: drop devm_iio_kfifo_free() API call iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions Alexandru Lazar (2): dt-bindings: iio: adc: Add MAX1241 bindings iio: adc: Add MAX1241 driver Andy Shevchenko (14): iio: light: st_uvis25: Drop unneeded casting when print error code iio: st_sensors: Use dev_get_platdata() to get platform_data iio: st_sensors: Drop unneeded explicit castings iio: st_sensors: Drop unneeded casting when print error code iio: st_sensors: Join string literals back iio: humidity: hts221: Use dev_get_platdata() to get platform_data iio: humidity: hts221: Make use of device properties iio: humidity: hts221: Drop unneeded casting when print error code iio: adc: intel_mrfld_adc: Use be16_to_cpu() instead of get_unaligned_be16() iio: pressure: bmp280: Tolerate IRQ before registering iio: pressure: bmp280: Convert to use ->read_avail() iio: pressure: bmp280: Explicitly mark GPIO optional iio: pressure: bmp280: Drop unneeded explicit castings iio: pressure: bmp280: Join string literals back Beniamin Bia (1): iio: adc: ad7476: implement devm_add_action_or_reset Christophe JAILLET (1): iio: imu: adis: Add a missing '\n' in a log message Daniel Campello (1): iio: Add SEMTECH SX9310/9311 sensor driver Dmitry Osipenko (1): iio: magnetometer: ak8974: Silence deferred-probe error Dragos Bogdan (3): iio: adc: ad7476: Generate CONVST signal internally iio: adc: ad7476: Add IIO_CHAN_INFO_RAW for AD7091R iio: adc: ad7476: Add AD7091 support Fabrice Gasnier (1): dt-bindings: iio: dac: stm32-dac: convert bindings to json-schema Gaëtan André (2): dt-bindings: st_sensors: add st,lis2hh12 compatible entry iio: accel: st_sensors: add support for LIS2HH12 Geert Uytterhoeven (1): iio: Fix misspellings of "Analog Devices" Guido Günther (5): dt-bindings: iio: vcnl4000: convert bindings to YAML format dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: light: vcnl4000: Add proximity-near-level iio: vcnl4000: Export near level property for proximity sensor Documentation: ABI: document IIO in_proximity_nearlevel file Jimmy Assarsson (2): iio: imu: st_lsm6dsx: Increase ODR_LIST_SIZE iio: imu: st_lsm6dsx: Add sensor hub device LIS3MDL Johan Jonker (3): dt-bindings: iio: adc: convert rockchip saradc bindings to yaml dt-bindings: iio: adc: rockchip-saradc: add description for rk3308 dt-bindings: iio: adc: rockchip-saradc: add description for px30 Jonathan Cameron (6): iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read Lars-Peter Clausen (4): iio: xilinx-xadc: Fix typo in author's name iio: buffer: Don't allow buffers without any channels enabled to be activated iio: dma-buffer: Cleanup buffer.h/buffer_impl.h includes iio: xilinx-xadc: Fix typo Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: configure full scale on slave device if supported iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver Michael Hennerich (2): iio: adc: adi-axi-adc: add support for AXI ADC IP core iio: adc: ad9467: add support AD9467 ADC Mike Looijmans (1): iio/gyro/bmg160: Add support for BMI088 chip Nishant Malpani (11): iio: light: tsl2563: Rename macro to fix typo iio: accel: kxsd9: Use vsprintf extension %pe for symbolic error name iio: gyro: bmg160_i2c: Use vsprintf extension %pe for symbolic error name iio: gyro: bmg160_spi: Use vsprintf extension %pe for symbolic error name iio: gyro: mpu3050: Use vsprintf extension %pe for symbolic error name iio: imu: bmi160_i2c: Use vsprintf extension %pe for symbolic error name iio: imu: bmi160_spi: Use vsprintf extension %pe for symbolic error name iio: imu: inv_mpu6050_i2c: Use vsprintf extension %pe for symbolic error name iio: imu: inv_mpu6050_spi: Use vsprintf extension %pe for symbolic error name iio: magn: bmc150: Use vsprintf extension %pe for symbolic error name dt-bindings: iio: tsl2563: convert bindings to YAML Rohit Sarkar (7): iio: core: Make mlock internal to the iio core iio: health: max30100: use generic property handler iio: adc: max1363: replace uses of mlock iio: imu: inv_mpu6050: add debugfs register r/w interface iio: temperature: ltc2983: remove redundant comparison to bool iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE Syed Nayyar Waris (1): MAINTAINERS: Add Syed Nayyar Waris to ACCES 104-QUAD-8 driver Takashi Iwai (2): iio: core: Use scnprintf() for avoiding potential buffer overflow iio: tsl2772: Use scnprintf() for avoiding potential buffer overflow Wolfram Sang (1): iio: imu: inv_mpu6050: convert to use i2c_new_client_device() Documentation/ABI/testing/sysfs-bus-iio-proximity | 10 + Documentation/ABI/testing/sysfs-bus-iio-sx9310 | 10 + .../devicetree/bindings/iio/adc/adi,ad9467.yaml | 65 ++ .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 62 ++ .../devicetree/bindings/iio/adc/maxim,max1241.yaml | 63 ++ .../bindings/iio/adc/rockchip-saradc.txt | 37 - .../bindings/iio/adc/rockchip-saradc.yaml | 80 ++ Documentation/devicetree/bindings/iio/common.yaml | 35 + .../devicetree/bindings/iio/dac/st,stm32-dac.txt | 63 -- .../devicetree/bindings/iio/dac/st,stm32-dac.yaml | 110 ++ .../devicetree/bindings/iio/gyroscope/bmg160.txt | 2 +- .../bindings/iio/light/amstaos,tsl2563.yaml | 49 + .../devicetree/bindings/iio/light/tsl2563.txt | 19 - .../devicetree/bindings/iio/light/vcnl4000.txt | 24 - .../bindings/iio/light/vishay,vcnl4000.yaml | 50 + .../devicetree/bindings/iio/st-sensors.txt | 1 + Documentation/driver-api/driver-model/devres.rst | 8 - Documentation/driver-api/iio/triggers.rst | 2 - MAINTAINERS | 1 + drivers/iio/accel/Kconfig | 2 +- drivers/iio/accel/kxsd9-i2c.c | 4 +- drivers/iio/accel/mxc4005.c | 4 +- drivers/iio/accel/st_accel.h | 2 + drivers/iio/accel/st_accel_buffer.c | 3 +- drivers/iio/accel/st_accel_core.c | 83 +- drivers/iio/accel/st_accel_i2c.c | 5 + drivers/iio/adc/Kconfig | 45 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/ad7476.c | 59 +- drivers/iio/adc/ad7780.c | 27 +- drivers/iio/adc/ad7791.c | 64 +- drivers/iio/adc/ad7793.c | 144 ++- drivers/iio/adc/ad9467.c | 422 ++++++++ drivers/iio/adc/adi-axi-adc.c | 482 +++++++++ drivers/iio/adc/at91_adc.c | 5 +- drivers/iio/adc/fsl-imx25-gcq.c | 4 +- drivers/iio/adc/intel_mrfld_adc.c | 6 +- drivers/iio/adc/max1241.c | 227 +++++ drivers/iio/adc/max1363.c | 32 +- drivers/iio/adc/sun4i-gpadc-iio.c | 4 +- drivers/iio/adc/xilinx-xadc-core.c | 4 +- drivers/iio/adc/xilinx-xadc-events.c | 2 +- drivers/iio/adc/xilinx-xadc.h | 2 +- drivers/iio/buffer/industrialio-buffer-dma.c | 1 - drivers/iio/buffer/industrialio-buffer-dmaengine.c | 41 +- drivers/iio/buffer/industrialio-hw-consumer.c | 31 - drivers/iio/buffer/industrialio-triggered-buffer.c | 11 - drivers/iio/buffer/kfifo_buf.c | 22 - drivers/iio/chemical/atlas-sensor.c | 7 +- drivers/iio/chemical/bme680_core.c | 36 +- drivers/iio/common/st_sensors/st_sensors_core.c | 6 +- drivers/iio/common/st_sensors/st_sensors_i2c.c | 4 +- drivers/iio/common/st_sensors/st_sensors_spi.c | 6 +- drivers/iio/common/st_sensors/st_sensors_trigger.c | 13 +- drivers/iio/gyro/Kconfig | 2 +- drivers/iio/gyro/bmg160_i2c.c | 6 +- drivers/iio/gyro/bmg160_spi.c | 5 +- drivers/iio/gyro/mpu3050-i2c.c | 4 +- drivers/iio/gyro/st_gyro_buffer.c | 3 +- drivers/iio/gyro/st_gyro_core.c | 9 +- drivers/iio/health/max30100.c | 7 +- drivers/iio/humidity/hts221_buffer.c | 6 +- drivers/iio/humidity/hts221_i2c.c | 6 +- drivers/iio/humidity/hts221_spi.c | 6 +- drivers/iio/imu/adis.c | 2 +- drivers/iio/imu/adis16400.c | 19 +- drivers/iio/imu/adis16460.c | 27 +- drivers/iio/imu/bmi160/bmi160_i2c.c | 4 +- drivers/iio/imu/bmi160/bmi160_spi.c | 4 +- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 8 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 23 +- drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 4 +- drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 4 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 96 ++ drivers/iio/industrialio-buffer.c | 18 +- drivers/iio/industrialio-core.c | 88 +- drivers/iio/industrialio-trigger.c | 53 - drivers/iio/inkern.c | 27 - drivers/iio/light/isl29125.c | 28 +- drivers/iio/light/ltr501.c | 2 +- drivers/iio/light/st_uvis25_i2c.c | 4 +- drivers/iio/light/st_uvis25_spi.c | 4 +- drivers/iio/light/tsl2563.c | 2 +- drivers/iio/light/tsl2772.c | 6 +- drivers/iio/light/vcnl4000.c | 25 + drivers/iio/magnetometer/ak8974.c | 7 +- drivers/iio/magnetometer/bmc150_magn_spi.c | 4 +- drivers/iio/magnetometer/mmc35240.c | 4 +- drivers/iio/magnetometer/st_magn_core.c | 3 +- drivers/iio/pressure/bmp280-core.c | 98 +- drivers/iio/pressure/st_pressure_core.c | 7 +- drivers/iio/proximity/Kconfig | 13 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/sx9310.c | 1069 ++++++++++++++++++++ drivers/iio/temperature/ltc2983.c | 4 +- drivers/iio/trigger/iio-trig-hrtimer.c | 2 +- drivers/staging/iio/Documentation/overview.txt | 2 +- include/linux/fpga/adi-axi-common.h | 6 +- include/linux/iio/adc/ad_sigma_delta.h | 58 -- include/linux/iio/adc/adi-axi-adc.h | 64 ++ include/linux/iio/buffer-dma.h | 2 +- include/linux/iio/buffer-dmaengine.h | 3 + include/linux/iio/buffer_impl.h | 9 - include/linux/iio/consumer.h | 18 - include/linux/iio/hw-consumer.h | 1 - include/linux/iio/iio.h | 10 +- include/linux/iio/kfifo_buf.h | 1 - include/linux/iio/trigger.h | 3 - include/linux/iio/triggered_buffer.h | 2 - 110 files changed, 3625 insertions(+), 774 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-proximity create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9310 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml create mode 100644 Documentation/devicetree/bindings/iio/common.yaml delete mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt create mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2563.txt delete mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt create mode 100644 Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml create mode 100644 drivers/iio/adc/ad9467.c create mode 100644 drivers/iio/adc/adi-axi-adc.c create mode 100644 drivers/iio/adc/max1241.c create mode 100644 drivers/iio/proximity/sx9310.c create mode 100644 include/linux/iio/adc/adi-axi-adc.h