diff mbox series

[v2,4/4] dt-bindings: iio: scd30: add device binding file

Message ID 20200530213630.87159-5-tomasz.duszynski@octakon.com (mailing list archive)
State New, archived
Headers show
Series Add support for SCD30 sensor | expand

Commit Message

Tomasz Duszynski May 30, 2020, 9:36 p.m. UTC 
Add SCD30 sensor binding file.

Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
---
 .../iio/chemical/sensirion,scd30.yaml         | 68 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml

Comments

Jonathan Cameron May 31, 2020, 10:19 a.m. UTC | #1 
On Sat, 30 May 2020 23:36:30 +0200
Tomasz Duszynski <tomasz.duszynski@octakon.com> wrote:

> Add SCD30 sensor binding file.
> 
> Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> ---
>  .../iio/chemical/sensirion,scd30.yaml         | 68 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> new file mode 100644
> index 000000000000..34cc3925d64d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SCD30 carbon dioxide sensor
> +
> +maintainers:
> +  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
> +
> +description: |
> +  Air quality sensor capable of measuring co2 concentration, temperature
> +  and relative humidity.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sensirion,scd30
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  sensirion,sel-gpios:
> +    description: GPIO connected to the SEL line
> +    maxItems: 1
> +
> +  sensirion,pwm-gpios:
> +    description: GPIO connected to the PWM line
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      scd30@61 {

Nodes should have generic names.  Not sure we have an appropriate
one in the spec, but as main focus of people using this will be
c02 herpas

	c02@61?  

Rob may well have a better suggestion!

> +        compatible = "sensirion,scd30";
> +        reg = <0x61>;
> +        vdd-supply = <&vdd>;
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +  - |
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    serial {
> +      scd30 {
> +        compatible = "sensirion,scd30";
> +        vdd-supply = <&vdd>;
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5db4b446c8ba..0ab9cf39e051 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15140,6 +15140,7 @@ F:	include/uapi/linux/phantom.h
>  SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
>  M:	Tomasz Duszynski <tomasz.duszynski@octakon.com>
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
>  F:	drivers/iio/chemical/scd30.h
>  F:	drivers/iio/chemical/scd30_core.c
>  F:	drivers/iio/chemical/scd30_i2c.c
Tomasz Duszynski May 31, 2020, 3:44 p.m. UTC | #2 
On Sun, May 31, 2020 at 11:19:14AM +0100, Jonathan Cameron wrote:
> On Sat, 30 May 2020 23:36:30 +0200
> Tomasz Duszynski <tomasz.duszynski@octakon.com> wrote:
>
> > Add SCD30 sensor binding file.
> >
> > Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> > ---
> >  .../iio/chemical/sensirion,scd30.yaml         | 68 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 69 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> > new file mode 100644
> > index 000000000000..34cc3925d64d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> > @@ -0,0 +1,68 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sensirion SCD30 carbon dioxide sensor
> > +
> > +maintainers:
> > +  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
> > +
> > +description: |
> > +  Air quality sensor capable of measuring co2 concentration, temperature
> > +  and relative humidity.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sensirion,scd30
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vdd-supply: true
> > +
> > +  sensirion,sel-gpios:
> > +    description: GPIO connected to the SEL line
> > +    maxItems: 1
> > +
> > +  sensirion,pwm-gpios:
> > +    description: GPIO connected to the PWM line
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    # include <dt-bindings/interrupt-controller/irq.h>
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      scd30@61 {
>
> Nodes should have generic names.  Not sure we have an appropriate
> one in the spec, but as main focus of people using this will be
> c02 herpas
>
> 	c02@61?
>

There are already a few recommended node names ending with '-sensor' on the list
like air-pollution-sensor or temperature-sensor. I'd say co2-sensor would work
here.

> Rob may well have a better suggestion!
>
> > +        compatible = "sensirion,scd30";
> > +        reg = <0x61>;
> > +        vdd-supply = <&vdd>;
> > +        interrupt-parent = <&gpio0>;
> > +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> > +  - |
> > +    # include <dt-bindings/interrupt-controller/irq.h>
> > +    serial {
> > +      scd30 {
> > +        compatible = "sensirion,scd30";
> > +        vdd-supply = <&vdd>;
> > +        interrupt-parent = <&gpio0>;
> > +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> > +
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 5db4b446c8ba..0ab9cf39e051 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -15140,6 +15140,7 @@ F:	include/uapi/linux/phantom.h
> >  SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
> >  M:	Tomasz Duszynski <tomasz.duszynski@octakon.com>
> >  S:	Maintained
> > +F:	Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> >  F:	drivers/iio/chemical/scd30.h
> >  F:	drivers/iio/chemical/scd30_core.c
> >  F:	drivers/iio/chemical/scd30_i2c.c
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 000000000000..34cc3925d64d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,68 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd30
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  sensirion,sel-gpios:
+    description: GPIO connected to the SEL line
+    maxItems: 1
+
+  sensirion,pwm-gpios:
+    description: GPIO connected to the PWM line
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      scd30@61 {
+        compatible = "sensirion,scd30";
+        reg = <0x61>;
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    serial {
+      scd30 {
+        compatible = "sensirion,scd30";
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 5db4b446c8ba..0ab9cf39e051 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15140,6 +15140,7 @@  F:	include/uapi/linux/phantom.h
 SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
 M:	Tomasz Duszynski <tomasz.duszynski@octakon.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
 F:	drivers/iio/chemical/scd30.h
 F:	drivers/iio/chemical/scd30_core.c
 F:	drivers/iio/chemical/scd30_i2c.c