| Message ID | 20200607155408.958437-21-jic23@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | IIO: Fused set 1 and 2 of timestamp alignment fixes | expand |
Hi Jonathan, as stated before, I think this is a good opportunity to fix FIFO data reading by replacing regmap_bulk_read by regmap_noinc_read. Otherwise it could also be done in another patch. Except that everything is perfect for me. Thanks, JB Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> From: Jonathan Cameron <jic23@kernel.org> Sent: Sunday, June 7, 2020 17:53 To: linux-iio@vger.kernel.org <linux-iio@vger.kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>; Jonathan Cameron <Jonathan.Cameron@huawei.com>; Lars-Peter Clausen <lars@metafoo.de>; Jean-Baptiste Maneyrol <JManeyrol@invensense.com> Subject: [PATCH 20/32] iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe. From: Jonathan Cameron <Jonathan.Cameron@huawei.com> This case is a bit different to the rest of the series. The driver was doing a regmap_bulk_read into a buffer that wasn't dma safe as it was on the stack with no guarantee of it being in a cacheline on it's own. Fixing that also dealt with the data leak and alignment issues that Lars-Peter pointed out. Also removed some unaligned handling as we are now aligned. Fixes tag is for the dma safe buffer issue. Potentially we would need to backport timestamp alignment futher but that is a totally different patch. Fixes: fd64df16f40e ("iio: imu: inv_mpu6050: Add SPI support for MPU6000") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 8 +++++--- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 12 ++++++------ 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index cd38b3fccc7b..e4df2d51b689 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -122,6 +122,9 @@ struct inv_mpu6050_chip_config { u8 user_ctrl; }; +/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 + /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register @@ -165,6 +168,7 @@ struct inv_mpu6050_hw { * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. * @magn_orient: magnetometer sensor chip orientation if available. * @suspended_sensors: sensors mask of sensors turned off for suspend + * @data: dma safe buffer used for bulk reads. */ struct inv_mpu6050_state { struct mutex lock; @@ -190,6 +194,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] ____cacheline_aligned; }; /*register and associated bit definition*/ @@ -334,9 +339,6 @@ struct inv_mpu6050_state { #define INV_ICM20608_TEMP_OFFSET 8170 #define INV_ICM20608_TEMP_SCALE 3059976 -/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 32 - #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 #define INV_MPU6050_ACTIVE_LOW 0x80 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 9511e4715e2c..554c16592d47 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/poll.h> #include <linux/math64.h> -#include <asm/unaligned.h> #include "inv_mpu_iio.h" /** @@ -121,7 +120,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) struct inv_mpu6050_state *st = iio_priv(indio_dev); size_t bytes_per_datum; int result; - u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; u16 fifo_count; s64 timestamp; int int_status; @@ -160,11 +158,12 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes are inside the FIFO * right now */ - result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, + st->data, INV_MPU6050_FIFO_COUNT_BYTE); if (result) goto end_session; - fifo_count = get_unaligned_be16(&data[0]); + fifo_count = be16_to_cpup((__be16 *)&st->data[0]); /* * Handle fifo overflow by resetting fifo. @@ -182,7 +181,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) inv_mpu6050_update_period(st, pf->timestamp, nb); for (i = 0; i < nb; ++i) { result = regmap_bulk_read(st->map, st->reg->fifo_r_w, - data, bytes_per_datum); + st->data, bytes_per_datum); if (result) goto flush_fifo; /* skip first samples if needed */ @@ -191,7 +190,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) continue; } timestamp = inv_mpu6050_get_timestamp(st); - iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + timestamp); } end_session:
On Mon, Jun 08, 2020 at 10:24:11AM +0000, Jean-Baptiste Maneyrol wrote: > Hi Jonathan, > > as stated before, I think this is a good opportunity to fix FIFO data reading by replacing regmap_bulk_read by regmap_noinc_read. > Otherwise it could also be done in another patch. It seems I didn't get this series to my work email, so, sorry for answering here. > - result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, > + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, > + st->data, > INV_MPU6050_FIFO_COUNT_BYTE); Now this can be one line :-) ... > - iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp); > + iio_push_to_buffers_with_timestamp(indio_dev, st->data, > + timestamp); And this seems redundant change.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index cd38b3fccc7b..e4df2d51b689 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -122,6 +122,9 @@ struct inv_mpu6050_chip_config { u8 user_ctrl; }; +/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 + /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register @@ -165,6 +168,7 @@ struct inv_mpu6050_hw { * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. * @magn_orient: magnetometer sensor chip orientation if available. * @suspended_sensors: sensors mask of sensors turned off for suspend + * @data: dma safe buffer used for bulk reads. */ struct inv_mpu6050_state { struct mutex lock; @@ -190,6 +194,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] ____cacheline_aligned; }; /*register and associated bit definition*/ @@ -334,9 +339,6 @@ struct inv_mpu6050_state { #define INV_ICM20608_TEMP_OFFSET 8170 #define INV_ICM20608_TEMP_SCALE 3059976 -/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 32 - #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 #define INV_MPU6050_ACTIVE_LOW 0x80 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 9511e4715e2c..554c16592d47 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/poll.h> #include <linux/math64.h> -#include <asm/unaligned.h> #include "inv_mpu_iio.h" /** @@ -121,7 +120,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) struct inv_mpu6050_state *st = iio_priv(indio_dev); size_t bytes_per_datum; int result; - u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; u16 fifo_count; s64 timestamp; int int_status; @@ -160,11 +158,12 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes are inside the FIFO * right now */ - result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, + st->data, INV_MPU6050_FIFO_COUNT_BYTE); if (result) goto end_session; - fifo_count = get_unaligned_be16(&data[0]); + fifo_count = be16_to_cpup((__be16 *)&st->data[0]); /* * Handle fifo overflow by resetting fifo. @@ -182,7 +181,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) inv_mpu6050_update_period(st, pf->timestamp, nb); for (i = 0; i < nb; ++i) { result = regmap_bulk_read(st->map, st->reg->fifo_r_w, - data, bytes_per_datum); + st->data, bytes_per_datum); if (result) goto flush_fifo; /* skip first samples if needed */ @@ -191,7 +190,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) continue; } timestamp = inv_mpu6050_get_timestamp(st); - iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + timestamp); } end_session: