diff mbox series

[v6,5/5] iio:temperature:mlx90632: Some stylefixing leftovers

Message ID 20200818213737.140613-6-cmo@melexis.com
State New
Headers show
Series iio: temperature: mlx90632: Add extended calibration calculations | expand

Commit Message

Crt Mori Aug. 18, 2020, 9:37 p.m. UTC
There is some inconsistency and whitespace cleanup performed in this
patch. It was done on top of my other patches, but I can rebase to head
of the togreg branch if it would go in sooner.

Signed-off-by: Crt Mori <cmo@melexis.com>
---
 drivers/iio/temperature/mlx90632.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Andy Shevchenko Aug. 19, 2020, 8:10 a.m. UTC | #1
On Wed, Aug 19, 2020 at 12:38 AM Crt Mori <cmo@melexis.com> wrote:
>
> There is some inconsistency and whitespace cleanup performed in this
> patch. It was done on top of my other patches, but I can rebase to head
> of the togreg branch if it would go in sooner.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Crt Mori <cmo@melexis.com>
> ---
>  drivers/iio/temperature/mlx90632.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
> index 94bca2b2866a..472a7fb20615 100644
> --- a/drivers/iio/temperature/mlx90632.c
> +++ b/drivers/iio/temperature/mlx90632.c
> @@ -112,10 +112,10 @@
>  #define MLX90632_DSP_VERSION   5 /* DSP version */
>  #define MLX90632_DSP_MASK      GENMASK(7, 0) /* DSP version in EE_VERSION */
>  #define MLX90632_RESET_CMD     0x0006 /* Reset sensor (address or global) */
> -#define MLX90632_REF_12                12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
> -#define MLX90632_REF_3         12LL /**< ResCtrlRef value of Channel 3 */
> -#define MLX90632_MAX_MEAS_NUM  31 /**< Maximum measurements in list */
> -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */
> +#define MLX90632_REF_12        12LL /* ResCtrlRef value of Ch 1 or Ch 2 */
> +#define MLX90632_REF_3         12LL /* ResCtrlRef value of Channel 3 */
> +#define MLX90632_MAX_MEAS_NUM  31 /* Maximum measurements in list */
> +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */
>  #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */
>
>  /**
> @@ -889,7 +889,7 @@ static int mlx90632_probe(struct i2c_client *client,
>                 mlx90632->mtyp = MLX90632_MTYP_EXTENDED;
>         } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
>                 dev_dbg(&client->dev,
> -                       "Detected Unknown EEPROM calibration %x\n", read);
> +                       "Detected Unknown EEPROM calibration %x\n", read);
>         } else {
>                 dev_err(&client->dev,
>                         "Wrong DSP version %x (expected %x)\n",
> --
> 2.25.1
>


--
With Best Regards,
Andy Shevchenko
diff mbox series

Patch

diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index 94bca2b2866a..472a7fb20615 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -112,10 +112,10 @@ 
 #define MLX90632_DSP_VERSION	5 /* DSP version */
 #define MLX90632_DSP_MASK	GENMASK(7, 0) /* DSP version in EE_VERSION */
 #define MLX90632_RESET_CMD	0x0006 /* Reset sensor (address or global) */
-#define MLX90632_REF_12		12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
-#define MLX90632_REF_3		12LL /**< ResCtrlRef value of Channel 3 */
-#define MLX90632_MAX_MEAS_NUM	31 /**< Maximum measurements in list */
-#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */
+#define MLX90632_REF_12 	12LL /* ResCtrlRef value of Ch 1 or Ch 2 */
+#define MLX90632_REF_3		12LL /* ResCtrlRef value of Channel 3 */
+#define MLX90632_MAX_MEAS_NUM	31 /* Maximum measurements in list */
+#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */
 #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */
 
 /**
@@ -889,7 +889,7 @@  static int mlx90632_probe(struct i2c_client *client,
 		mlx90632->mtyp = MLX90632_MTYP_EXTENDED;
 	} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
 		dev_dbg(&client->dev,
-			"Detected Unknown EEPROM calibration %x\n", read);	
+			"Detected Unknown EEPROM calibration %x\n", read);
 	} else {
 		dev_err(&client->dev,
 			"Wrong DSP version %x (expected %x)\n",