| Message ID | 20200910140000.324091-10-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qcom: pm8150: add support for thermal monitoring | expand |
On Thu, Sep 10, 2020 at 04:59:59PM +0300, Dmitry Baryshkov wrote: > Define adc-tm5 thermal monitoring part. Individual channes and thermal > zones are to be configured in per-device dts files. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > arch/arm64/boot/dts/qcom/pm8150.dtsi | 10 ++++++++++ > arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++ > arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++ > 3 files changed, 30 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi > index 1b6406927509..b1b518c6a2c9 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi > @@ -97,6 +97,16 @@ die-temp@6 { > }; > }; > > + pm8150_adc_tm: adc-tm@3500 { > + compatible = "qcom,spmi-adc-tm5"; > + reg = <0x3500>; > + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; > + #thermal-sensor-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > rtc@6000 { > compatible = "qcom,pm8941-rtc"; > reg = <0x6000>; > diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > index e112e8876db6..8e2f3250c914 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > @@ -95,6 +95,16 @@ chg-temp@9 { > }; > }; > > + pm8150b_adc_tm: adc-tm@3500 { > + compatible = "qcom,spmi-adc-tm5"; > + reg = <0x3500>; > + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; > + #thermal-sensor-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > pm8150b_gpios: gpio@c000 { > compatible = "qcom,pm8150b-gpio"; > reg = <0xc000>; > diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi > index 62139538b7d9..9f214ceec2b7 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi > @@ -89,6 +89,16 @@ die-temp@6 { > }; > }; > > + pm8150l_adc_tm: adc-tm@3500 { > + compatible = "qcom,spmi-adc-tm5"; > + reg = <0x3500>; > + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; > + #thermal-sensor-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > pm8150l_gpios: gpio@c000 { > compatible = "qcom,pm8150l-gpio"; > reg = <0xc000>; > -- > 2.28.0 >
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 1b6406927509..b1b518c6a2c9 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -97,6 +97,16 @@ die-temp@6 { }; }; + pm8150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index e112e8876db6..8e2f3250c914 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -95,6 +95,16 @@ chg-temp@9 { }; }; + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { compatible = "qcom,pm8150b-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 62139538b7d9..9f214ceec2b7 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -89,6 +89,16 @@ die-temp@6 { }; }; + pm8150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150l_gpios: gpio@c000 { compatible = "qcom,pm8150l-gpio"; reg = <0xc000>;
Define adc-tm5 thermal monitoring part. Individual channes and thermal zones are to be configured in per-device dts files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 10 ++++++++++ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++ arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++ 3 files changed, 30 insertions(+)