From patchwork Mon Sep 14 15:48:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 11774357 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EDF42159A for ; Mon, 14 Sep 2020 15:51:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CBE1E20E65 for ; Mon, 14 Sep 2020 15:51:22 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="zhd3020d" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726573AbgINPuz (ORCPT ); Mon, 14 Sep 2020 11:50:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50292 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726583AbgINPtQ (ORCPT ); Mon, 14 Sep 2020 11:49:16 -0400 Received: from mail-lj1-x241.google.com (mail-lj1-x241.google.com [IPv6:2a00:1450:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0DEC3C061A29 for ; Mon, 14 Sep 2020 08:48:45 -0700 (PDT) Received: by mail-lj1-x241.google.com with SMTP id r24so112972ljm.3 for ; Mon, 14 Sep 2020 08:48:44 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=CC03M+x7WzOjKcfpKM/7Z3TYFx8LGGbrK10cnVo1oKc=; b=zhd3020dqPyJBjQg4xlw3WBmmfR26mvl74Eic04WkGjniO5M4kKO0oY23a030j+4K+ 17N1jxXYlfhtBDzSML/181oAqats8sVbGvkVNKx+khr4j0YQ0PjicVtERIgxWA/NVEh9 3HayV7FbWkDOmDOcZE1Rr9RTZxzl2I/skjn1fzWDhD+GEXAQpmwCB2M3NplMpYkoUN61 A6BOUyMyrvfYINVSAbqiSNcRno7w0wmJJmyx5RvZ8cJojHmXSXLsZ371+MXN0hHdhqvO eCwLX0CrOsSuXYjh1FlXLaK43iPkWXWMfRRTPSxkHXWdK4Vk3xjKDiROO1s//csEW28i kyGQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=CC03M+x7WzOjKcfpKM/7Z3TYFx8LGGbrK10cnVo1oKc=; b=lO1xPEuxnh8pa1DzZ8aKObt/Sicm89ZsKapMcM3VTNT1mgbwBlnBztu6fcfQ3AjcFU r3rGhMQ3ivwyW4UoJ4MxdM/gLZwyiOVubyqHpxh2lT+/b/25YPWLm9awrT03tfkDfNUS subi6zvbqS9ETFeYmK6Y1nbcHi8/D4GLVroHVGrz0h23tfAz8oSunTNDpV3Iu9KKOdTp r22bqsrvORZ5qDCJTrZTbWGAUZH9dTbEldDWwE2CNIOT8Ww7aVBpDbMc3jZUmKla57Zt Cb/YzKbRGieAN06IZfQEK9XJkWoykHtqrkieygAWbKzA1oJgiyZUXD3hx1n70m6T1Ui8 ihnA== X-Gm-Message-State: AOAM533JScShzorjTlWLSvbs/2as5gS+puUXECqJymxz19Z3amDPYaU8 4LHzIp5mB2GWHQKxTfMKrgffpw== X-Google-Smtp-Source: ABdhPJz2vASekaU7iCRw1BahWLVfkQgGw4nQO3kE9PxUDfOIAnyC/nVOgX6NEi2SMgljUuLvzQseuQ== X-Received: by 2002:a2e:330e:: with SMTP id d14mr5426194ljc.12.1600098523459; Mon, 14 Sep 2020 08:48:43 -0700 (PDT) Received: from eriador.lan ([188.162.64.187]) by smtp.gmail.com with ESMTPSA id f19sm3834650lfs.85.2020.09.14.08.48.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 14 Sep 2020 08:48:42 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Rob Herring , Zhang Rui , Daniel Lezcano , Amit Kucheria , Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-iio@vger.kernel.org, Manivannan Sadhasivam Subject: [PATCH v5 9/9] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5 Date: Mon, 14 Sep 2020 18:48:09 +0300 Message-Id: <20200914154809.192174-10-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200914154809.192174-1-dmitry.baryshkov@linaro.org> References: <20200914154809.192174-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Port thermal zones definitions from msm-4.19 tree. Enable and add channel configuration to PMIC's ADC-TM definitions. Declare thermal zones and respective trip points. Signed-off-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 212 ++++++++++++++++++++++++ 1 file changed, 212 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 6e2f7ae1d621..d06207ac5593 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -24,6 +24,104 @@ chosen { stdout-path = "serial0:115200n8"; }; + thermal-zones { + xo-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + camera-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-therm { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -358,6 +456,120 @@ &cdsp { firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&pm8150_adc { + xo-therm@4c { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,adc-channel = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,adc-channel = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@2 { + reg = <2>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,adc-channel = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + camera-flash-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,adc-channel = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,adc-channel = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@2 { + reg = <2>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + &qupv3_id_1 { status = "okay"; };