diff mbox series

[3/3] dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.

Message ID 20201031181801.742585-4-jic23@kernel.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: yaml conversion of i2c-gate and IIO users | expand

Commit Message

Jonathan Cameron Oct. 31, 2020, 6:18 p.m. UTC
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Very similar to the mpu6050 binding.
Only unusual element is the i2c-gate section.
Example tweaked a little to include a real device behind the gate.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
 .../iio/gyroscope/invensense,mpu3050.txt      | 45 ------------
 .../iio/gyroscope/invensense,mpu3050.yaml     | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 45 deletions(-)

Comments

Rob Herring (Arm) Nov. 3, 2020, 2:30 a.m. UTC | #1
On Sat, Oct 31, 2020 at 06:18:01PM +0000, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Very similar to the mpu6050 binding.
> Only unusual element is the i2c-gate section.
> Example tweaked a little to include a real device behind the gate.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../iio/gyroscope/invensense,mpu3050.txt      | 45 ------------
>  .../iio/gyroscope/invensense,mpu3050.yaml     | 70 +++++++++++++++++++
>  2 files changed, 70 insertions(+), 45 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
> deleted file mode 100644
> index 233fe207aded..000000000000
> --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -Invensense MPU-3050 Gyroscope device tree bindings
> -
> -Required properties:
> -  - compatible : should be "invensense,mpu3050"
> -  - reg : the I2C address of the sensor
> -
> -Optional properties:
> -  - interrupts : interrupt mapping for the trigger interrupt from the
> -    internal oscillator. The following IRQ modes are supported:
> -    IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
> -    IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware
> -    for the desired interrupt type.
> -  - vdd-supply : supply regulator for the main power voltage.
> -  - vlogic-supply : supply regulator for the signal voltage.
> -  - mount-matrix : see iio/mount-matrix.txt
> -
> -Optional subnodes:
> -  - The MPU-3050 will pass through and forward the I2C signals from the
> -    incoming I2C bus, alternatively drive traffic to a slave device (usually
> -    an accelerometer) on its own initiative. Therefore is supports a subnode
> -    i2c gate node. For details see: i2c/i2c-gate.txt
> -
> -Example:
> -
> -mpu3050@68 {
> -	compatible = "invensense,mpu3050";
> -	reg = <0x68>;
> -	interrupt-parent = <&foo>;
> -	interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
> -	vdd-supply = <&bar>;
> -	vlogic-supply = <&baz>;
> -
> -	/* External I2C interface */
> -	i2c-gate {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		fnord@18 {
> -			compatible = "fnord";
> -			reg = <0x18>;
> -			interrupt-parent = <&foo>;
> -			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
> new file mode 100644
> index 000000000000..b0a476afb656
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Invensense MPU-3050 Gyroscope
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij@linaro.org>
> +
> +properties:
> +  compatible:
> +    const: invensense,mpu3050
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vlogic-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    description:
> +      Interrupt mapping for the trigger interrupt from the internal oscillator.
> +
> +  mount-matrix: true
> +
> +  i2c-gate:
> +    $ref: "../../i2c/i2c-gate.yaml"
> +    unevaluatedProperties: false
> +    description: |
> +      The MPU-3050 will pass through and forward the I2C signals from the
> +      incoming I2C bus, alternatively drive traffic to a slave device (usually
> +      an accelerometer) on its own initiative. Therefore is supports a subnode
> +      i2c gate node.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        gyroscope@68 {
> +            compatible = "invensense,mpu3050";
> +            reg = <0x68>;
> +            interrupt-parent = <&foo>;
> +            interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
> +            vdd-supply = <&bar>;
> +            vlogic-supply = <&baz>;
> +
> +            i2c-gate {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                magnetometer@c {
> +                    compatible = "ak,ak8975";
> +                    reg = <0x0c>;
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.28.0
>
Linus Walleij Nov. 3, 2020, 9:55 a.m. UTC | #2
On Sat, Oct 31, 2020 at 7:20 PM Jonathan Cameron <jic23@kernel.org> wrote:

> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Very similar to the mpu6050 binding.
> Only unusual element is the i2c-gate section.
> Example tweaked a little to include a real device behind the gate.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>

Sweet! Thanks for the help.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
deleted file mode 100644
index 233fe207aded..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
+++ /dev/null
@@ -1,45 +0,0 @@ 
-Invensense MPU-3050 Gyroscope device tree bindings
-
-Required properties:
-  - compatible : should be "invensense,mpu3050"
-  - reg : the I2C address of the sensor
-
-Optional properties:
-  - interrupts : interrupt mapping for the trigger interrupt from the
-    internal oscillator. The following IRQ modes are supported:
-    IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
-    IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware
-    for the desired interrupt type.
-  - vdd-supply : supply regulator for the main power voltage.
-  - vlogic-supply : supply regulator for the signal voltage.
-  - mount-matrix : see iio/mount-matrix.txt
-
-Optional subnodes:
-  - The MPU-3050 will pass through and forward the I2C signals from the
-    incoming I2C bus, alternatively drive traffic to a slave device (usually
-    an accelerometer) on its own initiative. Therefore is supports a subnode
-    i2c gate node. For details see: i2c/i2c-gate.txt
-
-Example:
-
-mpu3050@68 {
-	compatible = "invensense,mpu3050";
-	reg = <0x68>;
-	interrupt-parent = <&foo>;
-	interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-	vdd-supply = <&bar>;
-	vlogic-supply = <&baz>;
-
-	/* External I2C interface */
-	i2c-gate {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fnord@18 {
-			compatible = "fnord";
-			reg = <0x18>;
-			interrupt-parent = <&foo>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
new file mode 100644
index 000000000000..b0a476afb656
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -0,0 +1,70 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense MPU-3050 Gyroscope
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: invensense,mpu3050
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vlogic-supply: true
+
+  interrupts:
+    minItems: 1
+    description:
+      Interrupt mapping for the trigger interrupt from the internal oscillator.
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: "../../i2c/i2c-gate.yaml"
+    unevaluatedProperties: false
+    description: |
+      The MPU-3050 will pass through and forward the I2C signals from the
+      incoming I2C bus, alternatively drive traffic to a slave device (usually
+      an accelerometer) on its own initiative. Therefore is supports a subnode
+      i2c gate node.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@68 {
+            compatible = "invensense,mpu3050";
+            reg = <0x68>;
+            interrupt-parent = <&foo>;
+            interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&bar>;
+            vlogic-supply = <&baz>;
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                magnetometer@c {
+                    compatible = "ak,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...