diff mbox series

[10/46] dt-bindings:iio:health:maxim,max30102: txt to yaml conversion

Message ID 20201031184854.745828-11-jic23@kernel.org (mailing list archive)
State New
Headers show
Series dt-bindings:iio: yet more txt to yam conversions | expand

Commit Message

Jonathan Cameron Oct. 31, 2020, 6:48 p.m. UTC
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Straight forward binding.  Title was a bit of a challenge to keep short
as this binding covers sensors for two entirely different purposes.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <mranostay@gmail.com>
---
 .../bindings/iio/health/max30102.txt          | 33 --------
 .../bindings/iio/health/maxim,max30102.yaml   | 75 +++++++++++++++++++
 2 files changed, 75 insertions(+), 33 deletions(-)

Comments

Matt Ranostay Oct. 31, 2020, 9:38 p.m. UTC | #1
On Sat, Oct 31, 2020 at 11:51 AM Jonathan Cameron <jic23@kernel.org> wrote:
>
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Straight forward binding.  Title was a bit of a challenge to keep short
> as this binding covers sensors for two entirely different purposes.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Matt Ranostay <mranostay@gmail.com>
> ---
>  .../bindings/iio/health/max30102.txt          | 33 --------
>  .../bindings/iio/health/maxim,max30102.yaml   | 75 +++++++++++++++++++
>  2 files changed, 75 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
> deleted file mode 100644
> index 7ef7ae40ae4f..000000000000
> --- a/Documentation/devicetree/bindings/iio/health/max30102.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Maxim MAX30102 heart rate and pulse oximeter sensor
> -Maxim MAX30105 optical particle-sensing module
> -
> -* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
> -* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
> -
> -Required properties:
> -  - compatible: must be "maxim,max30102" or "maxim,max30105"
> -  - reg: the I2C address of the sensor
> -  - interrupts: the sole interrupt generated by the device
> -
> -  Refer to interrupt-controller/interrupts.txt for generic
> -  interrupt client node bindings.
> -
> -Optional properties:
> -  - maxim,red-led-current-microamp: configuration for red LED current
> -  - maxim,ir-led-current-microamp: configuration for IR LED current
> -  - maxim,green-led-current-microamp: configuration for green LED current
> -    (max30105 only)
> -
> -    Note that each step is approximately 200 microamps, ranging from 0 uA to
> -    50800 uA.
> -
> -Example:
> -
> -max30102@57 {
> -       compatible = "maxim,max30102";
> -       reg = <0x57>;
> -       maxim,red-led-current-microamp = <7000>;
> -       maxim,ir-led-current-microamp = <7000>;
> -       interrupt-parent = <&gpio1>;
> -       interrupts = <16 2>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
> new file mode 100644
> index 000000000000..67d40f4a91a7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
> +
> +maintainers:
> +  - Matt Ranostay <mranostay@gmail.com>

Change to my Konsulko email please, otherwise LGTM

Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>

> +
> +properties:
> +  compatible:
> +    enum:
> +      - maxim,max30102
> +      - maxim,max30105
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Connected to ADC_RDY pin.
> +
> +  maxim,red-led-current-microamp:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: RED LED current. Each step is approximately 200 microamps.
> +    minimum: 0
> +    maximum: 50800
> +
> +  maxim,ir-led-current-microamp:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: IR LED current. Each step is approximately 200 microamps.
> +    minimum: 0
> +    maximum: 50800
> +
> +  maxim,green-led-current-microamp:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Green LED current. Each step is approximately 200 microamps.
> +    minimum: 0
> +    maximum: 50800
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: maxim,max30100
> +    then:
> +      properties:
> +        maxim,green-led-current-microamp: false
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        heart-rate@57 {
> +            compatible = "maxim,max30102";
> +            reg = <0x57>;
> +            maxim,red-led-current-microamp = <7000>;
> +            maxim,ir-led-current-microamp = <7000>;
> +            interrupt-parent = <&gpio1>;
> +            interrupts = <16 2>;
> +        };
> +    };
> +...
> --
> 2.28.0
>
Jonathan Cameron Nov. 22, 2020, 5:29 p.m. UTC | #2
On Sat, 31 Oct 2020 14:38:29 -0700
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Sat, Oct 31, 2020 at 11:51 AM Jonathan Cameron <jic23@kernel.org> wrote:
> >
> > From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> >
> > Straight forward binding.  Title was a bit of a challenge to keep short
> > as this binding covers sensors for two entirely different purposes.
> >
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > Cc: Matt Ranostay <mranostay@gmail.com>
> > ---
> >  .../bindings/iio/health/max30102.txt          | 33 --------
> >  .../bindings/iio/health/maxim,max30102.yaml   | 75 +++++++++++++++++++
> >  2 files changed, 75 insertions(+), 33 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
> > deleted file mode 100644
> > index 7ef7ae40ae4f..000000000000
> > --- a/Documentation/devicetree/bindings/iio/health/max30102.txt
> > +++ /dev/null
> > @@ -1,33 +0,0 @@
> > -Maxim MAX30102 heart rate and pulse oximeter sensor
> > -Maxim MAX30105 optical particle-sensing module
> > -
> > -* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
> > -* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
> > -
> > -Required properties:
> > -  - compatible: must be "maxim,max30102" or "maxim,max30105"
> > -  - reg: the I2C address of the sensor
> > -  - interrupts: the sole interrupt generated by the device
> > -
> > -  Refer to interrupt-controller/interrupts.txt for generic
> > -  interrupt client node bindings.
> > -
> > -Optional properties:
> > -  - maxim,red-led-current-microamp: configuration for red LED current
> > -  - maxim,ir-led-current-microamp: configuration for IR LED current
> > -  - maxim,green-led-current-microamp: configuration for green LED current
> > -    (max30105 only)
> > -
> > -    Note that each step is approximately 200 microamps, ranging from 0 uA to
> > -    50800 uA.
> > -
> > -Example:
> > -
> > -max30102@57 {
> > -       compatible = "maxim,max30102";
> > -       reg = <0x57>;
> > -       maxim,red-led-current-microamp = <7000>;
> > -       maxim,ir-led-current-microamp = <7000>;
> > -       interrupt-parent = <&gpio1>;
> > -       interrupts = <16 2>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
> > new file mode 100644
> > index 000000000000..67d40f4a91a7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
> > @@ -0,0 +1,75 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
> > +
> > +maintainers:
> > +  - Matt Ranostay <mranostay@gmail.com>  
> 
> Change to my Konsulko email please, otherwise LGTM
> 
> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>

Done and this time I can drop the refs as per Rob's suggestion
as there isn't any interaction with minItems / maxItems.

Jonathan

> 
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - maxim,max30102
> > +      - maxim,max30105
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +    description: Connected to ADC_RDY pin.
> > +
> > +  maxim,red-led-current-microamp:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: RED LED current. Each step is approximately 200 microamps.
> > +    minimum: 0
> > +    maximum: 50800
> > +
> > +  maxim,ir-led-current-microamp:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: IR LED current. Each step is approximately 200 microamps.
> > +    minimum: 0
> > +    maximum: 50800
> > +
> > +  maxim,green-led-current-microamp:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: Green LED current. Each step is approximately 200 microamps.
> > +    minimum: 0
> > +    maximum: 50800
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: maxim,max30100
> > +    then:
> > +      properties:
> > +        maxim,green-led-current-microamp: false
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        heart-rate@57 {
> > +            compatible = "maxim,max30102";
> > +            reg = <0x57>;
> > +            maxim,red-led-current-microamp = <7000>;
> > +            maxim,ir-led-current-microamp = <7000>;
> > +            interrupt-parent = <&gpio1>;
> > +            interrupts = <16 2>;
> > +        };
> > +    };
> > +...
> > --
> > 2.28.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
deleted file mode 100644
index 7ef7ae40ae4f..000000000000
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ /dev/null
@@ -1,33 +0,0 @@ 
-Maxim MAX30102 heart rate and pulse oximeter sensor
-Maxim MAX30105 optical particle-sensing module
-
-* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
-* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
-
-Required properties:
-  - compatible: must be "maxim,max30102" or "maxim,max30105"
-  - reg: the I2C address of the sensor
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic
-  interrupt client node bindings.
-
-Optional properties:
-  - maxim,red-led-current-microamp: configuration for red LED current
-  - maxim,ir-led-current-microamp: configuration for IR LED current
-  - maxim,green-led-current-microamp: configuration for green LED current
-    (max30105 only)
-
-    Note that each step is approximately 200 microamps, ranging from 0 uA to
-    50800 uA.
-
-Example:
-
-max30102@57 {
-	compatible = "maxim,max30102";
-	reg = <0x57>;
-	maxim,red-led-current-microamp = <7000>;
-	maxim,ir-led-current-microamp = <7000>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 2>;
-};
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
new file mode 100644
index 000000000000..67d40f4a91a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+
+maintainers:
+  - Matt Ranostay <mranostay@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max30102
+      - maxim,max30105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,red-led-current-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: RED LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,ir-led-current-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: IR LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,green-led-current-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Green LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max30100
+    then:
+      properties:
+        maxim,green-led-current-microamp: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30102";
+            reg = <0x57>;
+            maxim,red-led-current-microamp = <7000>;
+            maxim,ir-led-current-microamp = <7000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...